Exfoliation joint

Last updated
Exfoliation joints wrapping around Half Dome in Yosemite National Park, California. Half Dome Trek 15 (4245933444).jpg
Exfoliation joints wrapping around Half Dome in Yosemite National Park, California.
Exfoliation joints in granite at Enchanted Rock State Natural Area, Texas, US. Detached blocks have slid along the steeply-dipping joint plane. GeologicalExfoliationOfGraniteRock.jpg
Exfoliation joints in granite at Enchanted Rock State Natural Area, Texas, US. Detached blocks have slid along the steeply-dipping joint plane.

Exfoliation joints or sheet joints are surface-parallel fracture systems in rock, often leading to the erosion of concentric slabs.

Contents

General characteristics

Formation

Despite their common occurrence in many different landscapes, geologists have yet to reach an agreement on a general theory of exfoliation joint formation. Many different theories have been suggested, below is a short overview of the most common.

Removal of overburden and rebound

Exfoliation joints exposed in a road cut in Yosemite National Park, California. Exfoliation joints granite yosemite.jpg
Exfoliation joints exposed in a road cut in Yosemite National Park, California.

This theory was originally proposed by the pioneering geomorphologist Grove Karl Gilbert in 1904. The basis of this theory is that erosion of overburden and exhumation of deeply buried rock to the ground surface allows previously compressed rock to expand radially, creating tensile stress and fracturing the rock in layers parallel to the ground surface. The description of this mechanism has led to alternate terms for exfoliation joints, including pressure release or offloading joints. Though the logic of this theory is appealing, there are many inconsistencies with field and laboratory observations suggesting that it may be incomplete, such as: [6] [10] [12]

One possible extension of this theory to match with the compressive stress theory (outlined below) is as follows [3] (Goodman, 1989): The exhumation of deeply buried rocks relieves vertical stress, but horizontal stresses can remain in a competent rock mass since the medium is laterally confined. Horizontal stresses become aligned with the current ground surface as the vertical stress drops to zero at this boundary. Thus large surface-parallel compressive stresses can be generated through exhumation that may lead to tensile rock fracture as described below.

Thermoelastic strain

Rock expands upon heating and contracts upon cooling and different rock-forming minerals have variable rates of thermal expansion / contraction. Daily rock surface temperature variations can be quite large, and many have suggested that stresses created during heating cause the near-surface zone of rock to expand and detach in thin slabs (e.g. Wolters, 1969). [12] Large diurnal or fire-induced temperature fluctuations have been observed to create thin lamination and flaking at the surface of rocks, sometimes labeled exfoliation. [13] However, since diurnal temperature fluctuations only reach a few centimeters depth in rock (due to rock's low thermal conductivity), this theory cannot account for the observed depth of exfoliation jointing that may reach 100 meters. [1] [3] [6] [10]

Chemical weathering

Mineral weathering by penetrating water can cause flaking of thin shells of rock since the volume of some minerals increases upon hydration. [10] However, not all mineral hydration results in increased volume, while field observations of exfoliation joints show that the joint surfaces have not experienced significant chemical alteration, so this theory can be rejected as an explanation for the origin of large-scale, deeper exfoliation joints.

Compressive stress and extensional fracture

Exfoliation joints have modified the near-surface portions of massive granitic rocks in Yosemite National Park, helping create the many spectacular domes, including Half Dome shown here. Yosemite 1 bg 090504.jpg
Exfoliation joints have modified the near-surface portions of massive granitic rocks in Yosemite National Park, helping create the many spectacular domes, including Half Dome shown here.

Large compressive tectonic stresses parallel to the land (or a free) surface can create tensile mode fractures in rock, where the direction of fracture propagation is parallel to the greatest principle compressive stress and the direction of fracture opening is perpendicular to the free surface. [3] [6] [7] [8] [9] [10] [14] This type of fracturing has been observed in the laboratory since at least 1900 (in both uniaxial and biaxial unconfined compressive loading; see Gramberg, 1989). [15] Tensile cracks can form in a compressive stress field due to the influence of pervasive microcracks in the rock lattice and extension of so-called wing cracks from near the tips of preferentially oriented microcracks, which then curve and align with the direction of the principle compressive stress. [16] [17] Fractures formed in this way are sometimes called axial cleavage, longitudinal splitting, or extensional fractures, and are commonly observed in the laboratory during uniaxial compression tests. High horizontal or surface-parallel compressive stress can result from regional tectonic or topographic stresses, or by erosion or excavation of overburden.

With consideration of the field evidence and observations of occurrence, fracture mode, and secondary forms, high surface-parallel compressive stresses and extensional fracturing (axial cleavage) seems to be the most plausible theory explaining the formation of exfoliation joints.

Engineering geology significance

Recognizing the presence of exfoliation joints can have important implications in geological engineering. Most notable may be their influence on slope stability. Exfoliation joints following the topography of inclined valley walls, bedrock hill slopes, and cliffs can create rock blocks that are particularly prone to sliding. Especially when the toe of the slope is undercut (naturally or by human activity), sliding along exfoliation joint planes is likely if the joint dip exceeds the joint's frictional angle. Foundation work may also be affected by the presence of exfoliation joints, for example in the case of dams. [18] Exfoliation joints underlying a dam foundation can create a significant leakage hazard, while increased water pressure in joints may result in lifting or sliding of the dam. Finally, exfoliation joints can exert strong directional control on groundwater flow and contaminant transport.

See also

Related Research Articles

<span class="mw-page-title-main">Weathering</span> Deterioration of rocks and minerals through exposure to the elements

Weathering is the deterioration of rocks, soils and minerals through contact with water, atmospheric gases, sunlight, and biological organisms. Weathering occurs in situ, and so is distinct from erosion, which involves the transport of rocks and minerals by agents such as water, ice, snow, wind, waves and gravity.

<span class="mw-page-title-main">Stress (mechanics)</span> Physical quantity that expresses internal forces in a continuous material

In continuum mechanics, stress is a physical quantity that describes forces present during deformation. For example, an object being pulled apart, such as a stretched elastic band, is subject to tensile stress and may undergo elongation. An object being pushed together, such as a crumpled sponge, is subject to compressive stress and may undergo shortening. The greater the force and the smaller the cross-sectional area of the body on which it acts, the greater the stress. Stress has dimension of force per area, with SI units of newtons per square meter (N/m2) or pascal (Pa).

<span class="mw-page-title-main">Fracture</span> Split of materials or structures under stress

Fracture is the appearance of a crack or complete separation of an object or material into two or more pieces under the action of stress. The fracture of a solid usually occurs due to the development of certain displacement discontinuity surfaces within the solid. If a displacement develops perpendicular to the surface, it is called a normal tensile crack or simply a crack; if a displacement develops tangentially, it is called a shear crack, slip band, or dislocation.

The field of strength of materials typically refers to various methods of calculating the stresses and strains in structural members, such as beams, columns, and shafts. The methods employed to predict the response of a structure under loading and its susceptibility to various failure modes takes into account the properties of the materials such as its yield strength, ultimate strength, Young's modulus, and Poisson's ratio. In addition, the mechanical element's macroscopic properties such as its length, width, thickness, boundary constraints and abrupt changes in geometry such as holes are considered.

<span class="mw-page-title-main">Compressive strength</span> Capacity of a material or structure to withstand loads tending to reduce size

In mechanics, compressive strength is the capacity of a material or structure to withstand loads tending to reduce size. In other words, compressive strength resists compression, whereas tensile strength resists tension. In the study of strength of materials, tensile strength, compressive strength, and shear strength can be analyzed independently.

<span class="mw-page-title-main">Crevasse</span> A deep crack, or fracture, in an ice sheet or glacier

A crevasse is a deep crack that forms in a glacier or ice sheet. Crevasses form as a result of the movement and resulting stress associated with the shear stress generated when two semi-rigid pieces above a plastic substrate have different rates of movement. The resulting intensity of the shear stress causes a breakage along the faces.

<span class="mw-page-title-main">Fracture mechanics</span> Study of propagation of cracks in materials

Fracture mechanics is the field of mechanics concerned with the study of the propagation of cracks in materials. It uses methods of analytical solid mechanics to calculate the driving force on a crack and those of experimental solid mechanics to characterize the material's resistance to fracture.

Geomechanics is the study of the mechanical state of the Earth's crust and the processes occurring in it under the influence of natural physical factors. It involves the study of the mechanics of soil and rock.

<span class="mw-page-title-main">Vein (geology)</span> Sheetlike body of crystallized minerals within a rock

In geology, a vein is a distinct sheetlike body of crystallized minerals within a rock. Veins form when mineral constituents carried by an aqueous solution within the rock mass are deposited through precipitation. The hydraulic flow involved is usually due to hydrothermal circulation.

<span class="mw-page-title-main">Joint (geology)</span> Type of fracture in rock

A joint is a break (fracture) of natural origin in a layer or body of rock that lacks visible or measurable movement parallel to the surface (plane) of the fracture. Although joints can occur singly, they most frequently appear as joint sets and systems. A joint set is a family of parallel, evenly spaced joints that can be identified through mapping and analysis of their orientations, spacing, and physical properties. A joint system consists of two or more intersecting joint sets.

This is an alphabetical list of articles pertaining specifically to structural engineering. For a broad overview of engineering, please see List of engineering topics. For biographies please see List of engineers.

<span class="mw-page-title-main">Granite dome</span> Rounded hills of bare granite formed by exfoliation

Granite domes are domical hills composed of granite with bare rock exposed over most of the surface. Generally, domical features such as these are known as bornhardts. Bornhardts can form in any type of plutonic rock but are typically composed of granite and granitic gneiss. As granitic plutons cool kilometers below the Earth's surface, minerals in the rock crystallize under uniform confining pressure. Erosion brings the rock closer to Earth's surface and the pressure from above the rock decreases; as a result the rock fractures. These fractures are known as exfoliation joints, or sheet fractures, and form in onionlike patterns that are parallel to the land surface. These sheets of rock peel off the exposed surface and in certain conditions develop domical structures. Additional theories on the origin of granite domes involve scarp-retreat and tectonic uplift.

<span class="mw-page-title-main">Fracture (geology)</span> Geologic discontinuity feature, often a joint or fault

A fracture is any separation in a geologic formation, such as a joint or a fault that divides the rock into two or more pieces. A fracture will sometimes form a deep fissure or crevice in the rock. Fractures are commonly caused by stress exceeding the rock strength, causing the rock to lose cohesion along its weakest plane. Fractures can provide permeability for fluid movement, such as water or hydrocarbons. Highly fractured rocks can make good aquifers or hydrocarbon reservoirs, since they may possess both significant permeability and fracture porosity.

<span class="mw-page-title-main">Focal mechanism</span> Process that generates seismic waves in an earthquake

The focal mechanism of an earthquake describes the deformation in the source region that generates the seismic waves. In the case of a fault-related event, it refers to the orientation of the fault plane that slipped, and the slip vector and is also known as a fault-plane solution. Focal mechanisms are derived from a solution of the moment tensor for the earthquake, which itself is estimated by an analysis of observed seismic waveforms. The focal mechanism can be derived from observing the pattern of "first motions", whether the first arriving P waves break up or down. This method was used before waveforms were recorded and analysed digitally, and this method is still used for earthquakes too small for easy moment tensor solution. Focal mechanisms are now mainly derived using semi-automatic analysis of the recorded waveforms.

<span class="mw-page-title-main">Bornhardt</span> A large dome-shaped, steep-sided, bald rock

A bornhardt is a dome-shaped, steep-sided, bald rock outcropping at least 30 metres (100 ft) in height and several hundred metres in width. They are named after Wilhelm Bornhardt (1864–1946), a German geologist and explorer of German East Africa, who first described the feature.

<span class="mw-page-title-main">Frost weathering</span> Mechanical weathering processes induced by the freezing of water into ice

Frost weathering is a collective term for several mechanical weathering processes induced by stresses created by the freezing of water into ice. The term serves as an umbrella term for a variety of processes, such as frost shattering, frost wedging, and cryofracturing. The process may act on a wide range of spatial and temporal scales, from minutes to years and from dislodging mineral grains to fracturing boulders. It is most pronounced in high-altitude and high-latitude areas and is especially associated with alpine, periglacial, subpolar maritime, and polar climates, but may occur anywhere at sub-freezing temperatures if water is present.

<span class="mw-page-title-main">Rock mass plasticity</span>

Plasticity theory for rocks is concerned with the response of rocks to loads beyond the elastic limit. Historically, conventional wisdom has it that rock is brittle and fails by fracture while plasticity is identified with ductile materials. In field scale rock masses, structural discontinuities exist in the rock indicating that failure has taken place. Since the rock has not fallen apart, contrary to expectation of brittle behavior, clearly elasticity theory is not the last word.

<span class="mw-page-title-main">Exfoliating granite</span> Granite skin peeling like an onion (desquamation) because of weathering

Exfoliating granite is a granite undergoing exfoliation, or onion skin weathering (desquamation). The external delaminated layers of granite are gradually produced by the cyclic variations of temperature at the surface of the rock in a process also called spalling. Frost and ice expansion in the joints during the winter accelerate the alteration process while the most unstable loosen external layers are removed by gravity assisted by runoff water.

<span class="mw-page-title-main">Microcracks in rock</span>

Microcracks in rock, also known as microfractures and cracks, are spaces in rock with the longest length of 1000 μm and the other two dimensions of 10 μm. In general, the ratio of width to length of microcracks is between 10−3 to 10−5.

Anderson's theory of faulting, devised by Ernest Masson Anderson in 1905, is a way of classifying geological faults by use of principal stress. A fault is a fracture in the surface of the Earth that occurs when rocks break under extreme stress. Movement of rock along the fracture occurs in faults. If no movement occurs, the fracture is described instead as a joint. The grinding of two rock masses against each another along a fault results in an earthquake and deformation of the Earth's crust. Faults can be classified into four types based on the kind of motion between the separated rock masses: normal, reverse, strike-slip, and oblique.

References

  1. 1 2 3 4 5 Gilbert, G.K. (1904). "Domes and dome structures of the high Sierra". Bulletin of the Geological Society of America. 15 (1): 29–36. Bibcode:1904GSAB...15...29G. doi:10.1130/GSAB-15-29.
  2. 1 2 3 Matthes, F.E. (1930). "Geologic history of the Yosemite Valley". U.S. Geological Survey Professional. 160.
  3. 1 2 3 4 5 6 7 8 9 Goodman, R.E. (1993). Engineering Geology. New York: John Wiley and Sons.
  4. 1 2 3 Dale, T.N. (1923). "The commercial granites of New England". United States Geological Survey Bulletin. 738.
  5. 1 2 3 4 Jahns, R.H. (1943). "Sheet structures in granites". Journal of Geology. 51 (2): 71–98. Bibcode:1943JG.....51...71J. doi:10.1086/625130. S2CID   129646638.
  6. 1 2 3 4 Holzhausen, G.R. (1989). "Origin of sheet structure, 1. Morphology and boundary conditions". Engineering Geology. 27 (1–4): 225–278. Bibcode:1989EngGe..27..225H. doi:10.1016/0013-7952(89)90035-5.
  7. 1 2 Bahat, D.; Grossenbacher, K.; Karasaki, K. (January 1999). "Mechanism of exfoliation joint formation in granitic rocks, Yosemite National Park". Journal of Structural Geology. 21 (1): 85–96. Bibcode:1999JSG....21...85B. doi:10.1016/s0191-8141(98)00069-8. ISSN   0191-8141.
  8. 1 2 Mandl, G. (2005). Rock Joints. Berlin: Springer-Verlag. ISBN   9783642063916.
  9. 1 2 Bradley, W.C. (1963). "Large-scale exfoliation in massive sandstones of the Colorado Plateau". Geological Society of America Bulletin. 74 (5): 519–527. doi:10.1130/0016-7606(1963)74[519:LEIMSO]2.0.CO;2.
  10. 1 2 3 4 5 6 Twidale, C.R. (1973). "On the origin of sheet jointing". Rock Mechanics and Rock Engineering. 5 (3): 163–187. Bibcode:1973RMFMR...5..163T. doi:10.1007/BF01238046. S2CID   129852438.
  11. 1 2 Romani, J.R.; Twidale, C.R. (1999). "Sheet fractures, other stress forms and some engineering implications". Geomorphology. 31 (1–4): 13–27. Bibcode:1999Geomo..31...13V. doi:10.1016/S0169-555X(99)00070-7.
  12. 1 2 Wolters, R. (1969). "Zur Ursache der Entstehung oberflächenparalleler Klüfte". Rock Mechanics and Rock Engineering. 1 (1): 53–70. Bibcode:1969RMFMR...1...53W. doi:10.1007/BF01247357. S2CID   129174541.
  13. Blackwelder, E. (1927). "Fire as an agent in rock weathering". Journal of Geology. 35 (2): 134–140. Bibcode:1927JG.....35..134B. doi:10.1086/623392. S2CID   129709077.
  14. Brunner, F.K.; Scheidegger, A.E. (1973). "Exfoliation". Rock Mechanics. 5 (1): 43–62. Bibcode:1973RMFMR...5...43B. doi:10.1007/bf01246756. ISSN   1434-453X.
  15. Gramberg, J. (1989). A non-conventional view on rock mechanics and fracture mechanics. A.A.Balkema. ISBN   9061918065.
  16. Hoek, E.; Bieniawski, Z.T. (1965). "Brittle fracture propagation in rock under compression". International Journal of Fracture Mechanics. 1 (3): 137–155. doi:10.1007/BF00186851. S2CID   198179354.
  17. Fairhurst, C.; Cook, N.G.W. (1966). "The phenomenon of rock splitting parallel to the direction of maximum compression in the neighbourhood of a surface". Proceedings 1st Congress, International Society of Rock Mechanics: 687–692.
  18. Terzaghi, K. (1962). "Dam foundation on sheeted granite". Geotechnique. 12 (3): 199–208. Bibcode:1962Getq...12..199T. doi:10.1680/geot.1962.12.3.199. ISSN   0016-8505.