Gotham Curve

Last updated

A railtour rounds the curve carrying enthusiasts in brake vans and open wagons in 1964. Gotham curve.jpg
A railtour rounds the curve carrying enthusiasts in brake vans and open wagons in 1964.

The Gotham Curve was once the sharpest curve on any standard gauge railway line in the UK. [1] [2] [3] [4] The curve, which was situated in the sparsely populated, exposed limestone uplands in the Peak District of Derbyshire, England, was on the Cromford and High Peak Railway. [5] The single-track main line was inherited by British Railways in 1948. It closed in 1967.

Contents

Description

Although sharper curves were present on industrial sidings and harbour railways, the line through the Gotham curve went through an 80 degree curve with a radius of 55 yards (50 m). The curve was subject to a speed limit of 5 mph (8 km/h) and led "the platelayer [..] to keep a supply of rail chairs and other spares to hand in case a driver "burst the rails" when negotiating the curve." [6] It might have once had a steep camber but none was present in 1954 when there were check-rails in place. [7]

History

The section of line including the curve opened on 29 May 1830. [8] Initially, trains through the curve were horse-drawn, but the intention, as enshrined in the enabling legislation, was also to use steam locomotives, the first of which started work in 1833. [9] Horse-haulage through the curve had finished by the mid-1860s. [10] Diesel shunter 12006 was tested through the curve in 1959, but was considered unsuitable, largely because it was barely able to climb the line's other extreme feature, the Hopton Incline. [11] [12] [13] A further trial took place in August 1966, using Class 08 diesel shunter D3778. [14] The locomotive was rostered to take over from steam from 31 August 1966 but for some reason it did not happen and steam monopolised the curve until closure the following spring. [15] Trains were conventional, but locomotives and rolling stock nevertheless had to be carefully selected. Only short wheelbase wagons, tenders and brake vans were permitted and few locomotives could negotiate the extreme curvature without putting machine and track under unacceptable strain. [16] This led to a limited number of locomotive types using the curve for unusually long periods. [17] Starting in 1931 several NLR 0-6-0Ts were moved from the London area to the line, remaining there until 1956, when they were progressively displaced by a small fleet of J94 0-6-0STs, which worked the stretch until closure. The last NLR loco, No. 58850, was withdrawn in 1960 and has been preserved. Both classes of locomotive, despite having six-coupled wheels, were specifically designed for low-speed, high power dock and shunting work, where they could encounter severe curves and gradients.

Passenger services ran through the curve from 1833 to 1876, [18] some were horse-drawn, the rest steam-hauled. Loadings in this sparsely-populated upland area were very light. [19] [20] Evidence of the forms of provision is patchy and inconsistent, [21] with the clearest sources being anecdotal. [22] [23] [24] [25] Some horse-drawn provision appears to have been based on stagecoaches, with inside and outside provision similar to the 'Dandy' used on the service to Port Carlisle. In locomotive-hauled trains passengers were accommodated by attaching a specially adapted guard's van to conventional goods trains; the adaptation consisted of putting some seating in the van's goods section. Like a number of other features on the line, this vehicle was given a name - Fly - inherited from the canal world, though the term appears to have been used interchangeably to mean the vehicle and the train. [20]

Passenger traffic was slight and general goods was substantially less than the line's promoters foresaw, [26] especially after the line was effectively bypassed in the 1860s then truncated in 1892. The sparsely populated, largely agricultural area surrounding the curve meant that coal was the only significant inflow and milk the only significant outflow, except for the one traffic which dominated all – stone products, notably limestone and burnt lime. This traffic grew, and kept the line open despite its many operating obstacles, of which the curve was but one. Towards the end the curve's significance grew, as quarrying processes became more efficient and rail sought higher payloads the light trains of short wheelbase-only rolling stock kept trains short and composed of small, slow-moving, obsolescent and uneconomic wagons. [27] There was one other traffic, a 19th Century relic, whereby the line carried water. Limestone uplands drain naturally, so, despite the high rainfall, water supply to outlying properties was a problem. Some railway properties needed water, the railway itself needed water and in the 1960s Prestwich Intake Quarry needed water, so it was carried on trains using former locomotive tenders specially adapted by adding buffers at each end and, where a tender originally had six wheels, the centre wheels were removed. This last adaptation helped on the Gotham Curve, but was required to enable such vehicles to pass over the extreme vertical curves at the feet and especially the tops of Sheep Pasture and Middleton Inclines [28] [29] [30] [31] [32] [33] Tanks were mostly replenished from a spring at the foot of Sheep Pasture Incline, then worked up towards Parsley Hay as required, but some replenishment took place at Buxton, the tenders being worked southwards onto the High Peak line. This duality ensured continuity of supply if, for example, Sheep Pasture Incline was out of action. From the early 1960s more modern and more capacious six-wheeled tenders started to appear among the traditional vehicles north of Middleton, especially after Middleton Incline closed in 1963. [34] [35] [36]

Special trains

The Cromford and High Peak Railway was promoted in the 1820s and opened in two stages in 1830 and 1831. By 1900 it had been reduced by half, but the remaining half had many archaic features, of which the Gotham Curve was one. After the Second World War it attracted a wide following among railway enthusiasts, which is reflected in the volume of print and film material; [37] it was also reflected in the number of special passenger trains run between 1953 and closure in 1967. As only short-wheelbase rolling stock could be used, participants paid significant monies to travel in guards vans and open wagons. The highlight of such tours was to participate in trains storming the Hopton Incline, [38] but "rumbling, grinding and squealing" [39] round the Gotham Curve was seen as a key part of the experience. [40] [41] [42] [43] [44]

Legacy

In 1971 the Peak Park Planning Board and Derbyshire County Council bought the track bed from north of the site of Hurdlow station, near Buxton, through Gotham Curve to High Peak Junction, near Cromford and turned it into the High Peak Trail, which is now National Route 54 of the National Cycle Network. The trail is popular with walkers, cyclists and horse riders. [45] [46]

The High Peak Trail is also designated as part of the Pennine Bridleway, a leisure route that starts at Middleton Top, near Cromford, and includes 73 miles (117 km) through Derbyshire to the South Pennines.

The curve was dramatic in railway terms, but as part of an off-road trail it does not catch the public's imagination, particularly when compared with inclines, embankments, machinery, buildings and scenery. It is, nevertheless, preserved and mentioned, if not proclaimed. [47] [48]

See also

Related Research Articles

<span class="mw-page-title-main">Wye (rail)</span> Y-shaped rail junction

In railroad structures, and rail terminology, a wye or triangular junction is a triangular joining arrangement of three rail lines with a railroad switch at each corner connecting to each incoming line. A turning wye is a specific case.

<span class="mw-page-title-main">Cromford and High Peak Railway</span> Early British railway company (1833–1871)

The Cromford and High Peak Railway (C&HPR) was a standard-gauge line between the Cromford Canal wharf at High Peak Junction and the Peak Forest Canal at Whaley Bridge. The railway, which was completed in 1831, was built to carry minerals and goods through the hilly rural terrain of the Peak District within Derbyshire, England. The route was marked by a number of roped worked inclines. Due to falling traffic, the entire railway was closed by 1967.

<span class="mw-page-title-main">High Peak Trail</span> Bridleway in the English Peak District

The High Peak Trail is a 17-mile (27 km) trail for walkers, cyclists and horse riders in the Peak District of England. Running from Dowlow (53.2059°N 1.8349°W), near Buxton, to High Peak Junction, Cromford (53.1004°N 1.5354°W), it follows the trackbed of the former Cromford and High Peak Railway, which was completed in 1831 to carry minerals and goods between the Cromford Canal wharf at High Peak Junction and the Peak Forest Canal at Whaley Bridge.

<span class="mw-page-title-main">Hopton Incline</span>

Until it closed in 1967 the Hopton Incline was the steepest stretch of conventional, adhesion-worked standard gauge railway running line in the UK. The incline was situated in sparsely populated, exposed limestone uplands in the Peak District of Derbyshire, England.

<span class="mw-page-title-main">Parsley Hay railway station</span> Former railway station in Derbyshire, England

Parsley Hay railway station served Parsley Hay, a hamlet within Hartington Middle Quarter civil parish, about 9.3 miles (15 km) south east of Buxton, Derbyshire, on the LNWR line to Ashbourne. The nearest large settlement is the village of Hartington.

The Ashbourne line was a 33+12 mi (53.9 km) railway from Buxton via Ashbourne to Uttoxeter. It was built by the London and North Western Railway using a section of the Cromford and High Peak Railway (C&HPR) and it joined the North Staffordshire Railway at Ashbourne, proceeding to Uttoxeter with a junction onto the main line at Rocester.

<span class="mw-page-title-main">Hurdlow railway station</span> Former railway station in Derbyshire, England

Hurdlow railway station was near to the hamlet of Hurdlow within Hartington Middle Quarter civil parish, to the south east of Buxton, Derbyshire on the LNWR line to Ashbourne and the south.

Thorpe Cloud railway station was opened in 1899 between the villages of Thorpe and Fenny Bentley in Derbyshire, south east of Buxton.

<span class="mw-page-title-main">Alsop en le Dale railway station</span> Former railway station in Derbyshire, England

Alsop en le Dale railway station was opened in 1899 near Alsop en le Dale and Alstonefield, villages in Derbyshire southeast of Buxton.

<span class="mw-page-title-main">Hartington railway station</span> Former railway station in Derbyshire, England

Hartington railway station opened in 1899 about two miles away from the village it served - Hartington in Derbyshire, south east of Buxton.

<span class="mw-page-title-main">Renishaw Central railway station</span> Former railway station in Derbyshire, England

Renishaw Central is a former railway station in Renishaw, Derbyshire, England.

<span class="mw-page-title-main">Shirebrook North railway station</span> Former railway station in Derbyshire, England

Shirebrook North railway station was a railway station serving the town of Shirebrook in Derbyshire, England. It was on the Lancashire, Derbyshire and East Coast Railway running from Chesterfield to Lincoln. The starion was also on the former Shirebrook North to Nottingham Victoria Line and the Sheffield District Railway. The station has since been demolished and housing now occupies parts of the site with some stub rails nearby serving a train scrapper.

<span class="mw-page-title-main">Warsop railway station</span> Former railway station in Nottinghamshire, England

Warsop railway station is a former railway station in Market Warsop, Nottinghamshire, England.

<span class="mw-page-title-main">Tuxford Central railway station</span> Former railway station in Nottinghamshire, England

Tuxford Central railway station is a former railway station in Tuxford, Nottinghamshire, England.

<span class="mw-page-title-main">Ashbourne railway station</span> Former railway station in Derbyshire, England

Ashbourne railway station formerly served the town of Ashbourne in Derbyshire. There have been two stations in the town. The first, opened in 1852, was operated by the North Staffordshire Railway (NSR); it was replaced in 1899 by a station at a new location, jointly operated by the NSR and the London and North Western Railway (LNWR). In 1923 the station passed into the ownership of the London, Midland and Scottish Railway and in 1948 that of the London Midland Region of British Railways. It was finally closed to all traffic in 1963.

<span class="mw-page-title-main">High Peak Junction</span>

High Peak Junction, near Cromford, Derbyshire, England, is the name now used to describe the site where the former Cromford and High Peak Railway (C&HPR), whose workshops were located here, meets the Cromford Canal. It lies within Derwent Valley Mills World Heritage Site, designated in 2001, and today marks the southern end of the High Peak Trail, a 17 miles (27 km) trail for walkers, cyclists and horse riders. The Derwent Valley Heritage Way also passes this point, and popular walks lead from here along the towpath in both directions.

<span class="mw-page-title-main">LNWR DX Goods class</span>

The London and North Western Railway (LNWR) DX Goods class was a class of 0-6-0 steam locomotive, designed by John Ramsbottom for freight duties. 943 were constructed, making them the largest single class of steam locomotives built in the United Kingdom. Despite this, none were preserved.

Cromford Incline is a former railway incline in Cromford, Derbyshire. Historically on the Cromford and High Peak Railway. The incline was one of six inclines along the entire line from Cromford to Whaley Bridge in High Peak, Derbyshire. The incline was opened in 1830 and was in use until 1967 when the entire line from Whaley Bridge to Middleton was closed. With the section to Cromford closing in 1963. Today, the incline is used as part of the High Peak Trail. Cromford Incline was also 1 in 9 gradient. Like the other ones along the former railway.

Middleton Incline is a former railway incline in Middleton, Derbyshire. Historically on the Cromford and High Peak Railway. The incline was one of six inclines along the entire line from Cromford to Whaley Bridge in High Peak, Derbyshire. The incline was opened in 1830 and was in use until 1967 when the entire line from Whaley Bridge to Middleton was closed. With the section to Cromford closing in 1963. Today, the incline is used as part of the High Peak Trail. Middleton Pasture Incline was also 1 in 9 gradient. Like the other ones along the former railway.

Minninglow Goods Yard was a goods station located on the Cromford and High Peak Railway near the villages of Aldwark, Pikehall and Longcliffe in Derbyshire. Mostly for moving mineral and quarry traffic. It closed in 1967 along with the rest of the line. And today, nothing remains of the goods yard. The trackbed now forms part of the High Peak Trail. The site of Minninglow is also now a landmark on the High Peak Trail.

References

  1. Broome 1985, 22 pages from end of book.
  2. Coleford 1996a, p. 6.
  3. Jones & Bentley 2001, pp. 6–7.
  4. Marshall 2011, pp. 50 & 53.
  5. The curve on a 25" Edwardian OS map, with modern overlays National Library of Scotland
  6. Jones & Bentley 2001, p. 10.
  7. Rimmer 1998, pp. 59 & 69.
  8. Rimmer 1998, p. 9.
  9. Rimmer 1998, pp. 7 & 12.
  10. Marshall 2011, p. 38.
  11. Coleford 1996a, p. 20.
  12. Coleford 1996b, p. 297.
  13. Miles 2013c, p. 359.
  14. Cooke 1966, p. 640.
  15. Coleford 1996a, p. 21.
  16. Coleford 1996a, p. 11.
  17. Jones & Bentley 2000, p. 36.
  18. Marshall 2011, p. 59.
  19. Moorsom and the Attempt to Revive the Cromford And High Peak Railway Derbyshire Archaeological Journal 1983 see Appendix 1
  20. 1 2 Marshall 2011, p. 56.
  21. Quick 2009, pp. 433–4.
  22. Marshall 2011, pp. 53–55.
  23. A journey on the line in 1837 Manchester City News
  24. A journey on the line in 1854 Derby Mercury
  25. A journey on the line in 1883: Williams, Chap IV, p. 99 Google Books
  26. Marshall 2011, p. 21.
  27. Coleford 1996a, p. 28.
  28. Coleford 1996a, p. 26.
  29. Jones & Bentley 2001, pp. 15, 31, 35, 39 & 43–48.
  30. Rhodes 1967, p. 98.
  31. Marshall 2011, pp. 33, 47, 76 & 85.
  32. Rimmer 1998, pp. 24 & 84.
  33. Broome 1985, pp. 23, 24, 44 & 56.
  34. Marshall 2011, p. 33.
  35. Coleford 1996a, p. 15.
  36. Jones & Bentley 2001, p. 3.
  37. A journey along the line in 1958, Gotham at 4min 48sec from start YouTube
  38. Kaye 1987, Centre of book.
  39. Allen 1955, p. 446.
  40. High Peak Railtour 1961, Gotham at 4min 20sec from start YouTube
  41. High Peak Railtour March 1967, includes Gotham Sutherland Davenport
  42. Kingscott 2007, p. 33.
  43. Nicholson 1977, p. 62.
  44. Peters 1976, Plate 435.
  45. The High Peak Trail Sustrans
  46. The High Peak Trail Derbyshire Peak District
  47. Attractions on the High Peak Trail Derbyshire County Council
  48. Viccars & Williams 2004, p. 32.

Sources

  • Allen, G.Freeman, ed. (November 1955). "Trains Illustrated Excursion to the Cromford & High Peak". Talking of Trains. Trains Illustrated . Vol. 8, no. 11. Surrey: Ian Allan. ISSN   0026-8356.
  • Broome, Tony (1985). Cromford & High Peak Railway : picture album. Altrincham: Willow. ISBN   978-0-946361-01-4.
  • Coleford, I.C. (1996a). The Cromford & High Peak Railway. Clophill: Irwell Press. ISBN   978-1-871608-78-6.
  • Coleford, I.C. (October–November 1996b). Smith, Martin (ed.). "Over the Hills – A Miscellany". Railway Bylines. Clophill: Irwell Press Limited. 1 (6). ISSN   1360-2098.
  • Cooke, B.W.C., ed. (November 1966). "High Peak Power". Panorama. The Railway Magazine . Vol. 112, no. 787. London: Tothill Press Limited. ISSN   0033-8923.
  • Jones, Norman; Bentley, J.M. (2000). Railways of the High Peak: Whaley Bridge to Friden. Scenes from the Past. Stockport: Foxline. ISBN   978-1-902827-09-4. No.37 (Part 1).
  • Jones, Norman; Bentley, J.M. (2001). Railways of the High Peak: Onwards to Cromford and High Peak Junction. Scenes from the Past. Stockport: Foxline. ISBN   978-1-870119-67-2. No.37 (Part 2).
  • Kaye, Andrew R. (1987). North Midland and Peak District Railways in the Steam Age. Chesterfield: Lowlander Publications. ISBN   978-0-946930-06-7.
  • Kingscott, Geoffrey (2007). Lost Railways of Derbyshire. Newbury, Berkshire: Countryside Books. ISBN   978-1-84674-042-8.
  • Marshall, John (2011). The Cromford & High Peak Railway. Leeds: Martin Bairstow. ISBN   978-1-871944-39-6.
  • Miles, Keith (July 2013c). Hawkins, Chris (ed.). "The Cromford and High Peak, Home of the Hermits of the Hills". Railway Bylines. Clophill: Irwell Press Limited. 18 (8). ISSN   1360-2098. Part 3.
  • Nicholson, Christopher P. (1977). Branch Lines in the Peak District. Clapham, North Yorkshire: Dalesman Books. ISBN   978-0-85206-389-7.
  • Peters, Ivo (1976). Somewhere along the line : fifty years love of trains. Yeovil: Haynes. ISBN   978-0-902888-80-7.
  • Quick, Michael (2009) [2001]. Railway passenger stations in Great Britain: a chronology (4th ed.). Oxford: Railway & Canal Historical Society. ISBN   978-0-901461-57-5. OCLC   612226077.
  • Rhodes, Josephine F. (March 1967). Kitchenside, G.M. (ed.). "The Cromford and High Peak line". Railway World. Vol. 28, no. 322. Shepperton: Ian Allan.
  • Rimmer, A. (1998). The Cromford & High Peak Railway (2nd ed.). Usk: Oakwood Press. ISBN   978-0-85361-319-0. LP10.
  • Viccars, Sue; Williams, Mike (2004). The Pennine bridleway : Derbyshire to the South Pennines. National Trail Guide. London: Aurum. ISBN   978-1-85410-957-6.

Coordinates: 53°07′24″N1°43′17″W / 53.1234°N 1.7213°W / 53.1234; -1.7213