1815 Philadelphia train accident

Last updated

1815 Philadelphia train accident
Bruntons Traveller.jpg
1815 Philadelphia train accident
Details
Date31 July 1815 (1815-07-31)
Location Philadelphia, County Durham, England, United Kingdom
Coordinates 54°51′47″N1°28′41″W / 54.863°N 1.478°W / 54.863; -1.478
Incident type Railway accident
Cause Boiler explosion
Statistics
Deaths13-16

The 1815 Philadelphia train accident occurred on 31 July 1815, in Philadelphia, County Durham, England, when an early experimental railway locomotive, Brunton's Mechanical Traveller, suffered a boiler explosion. This engine, also known as the Steam Horse, ran on four wheels but was pushed by mechanical feet. This was both the first recorded boiler explosion [1] and the first railway accident causing major loss of life with at least 13 people killed (sources differ).

The accident is not included in many texts because it was on an industrial waggonway or plateway, rather than a public railway. Nevertheless, it predated William Huskisson's fatal accident at Parkside by 15 years, and the death toll was not exceeded by any railway accident until 1842 worldwide (see Versailles rail accident), and 1861 in the UK (Clayton Tunnel). It also killed more people than any other UK railway boiler explosion of all time, though 26 were killed in a 1912 boiler explosion in San Antonio, USA.

Most boiler explosions caused severe mechanical damage but often only the locomotive crew suffered physically; however, Brunton's locomotive was surrounded at the time by a crowd of curious sightseers, who formed the majority of the victims. The first high-pressure steam locomotive, Trevithick's Penydarren engine, had only appeared 11 years earlier in 1804, and engineering understanding of the forces and safety risks involved was still primitive.

Related Research Articles

<span class="mw-page-title-main">Steam engine</span> Engine that uses steam to perform mechanical work

A steam engine is a heat engine that performs mechanical work using steam as its working fluid. The steam engine uses the force produced by steam pressure to push a piston back and forth inside a cylinder. This pushing force can be transformed by a connecting rod and crank into rotational force for work. The term "steam engine" is most commonly applied to reciprocating engines as just described, although some authorities have also referred to the steam turbine and devices such as Hero's aeolipile as "steam engines". The essential feature of steam engines is that they are external combustion engines, where the working fluid is separated from the combustion products. The ideal thermodynamic cycle used to analyze this process is called the Rankine cycle. In general usage, the term steam engine can refer to either complete steam plants, such as railway steam locomotives and portable engines, or may refer to the piston or turbine machinery alone, as in the beam engine and stationary steam engine.

<span class="mw-page-title-main">Boiler</span> Closed vessel in which fluid is heated

A boiler is a closed vessel in which fluid is heated. The fluid does not necessarily boil. The heated or vaporized fluid exits the boiler for use in various processes or heating applications, including water heating, central heating, boiler-based power generation, cooking, and sanitation.

<span class="mw-page-title-main">Steam locomotive</span> Railway locomotive that produces its pulling power through a steam engine

A steam locomotive is a locomotive that provides the force to move itself and other vehicles by means of the expansion of steam. It is fuelled by burning combustible material to heat water in the locomotive's boiler to the point where it becomes gaseous and its volume increases 1,700 times. Functionally, it is a steam engine on wheels.

<span class="mw-page-title-main">Snowdon Mountain Railway</span> Rack & pinion railway to the top of Snowdon in Wales

The Snowdon Mountain Railway is a narrow gauge rack-and-pinion mountain railway in Gwynedd, north-west Wales. It is a tourist railway that travels for 4.7 miles (7.6 km) from Llanberis to the summit of Snowdon, the highest peak in Wales. A return journey, including the stop at the summit, takes 2½ hours.

<span class="mw-page-title-main">Richard Trevithick</span> British inventor and mining engineer (1771–1833)

Richard Trevithick was a British inventor and mining engineer. The son of a mining captain, and born in the mining heartland of Cornwall, Trevithick was immersed in mining and engineering from an early age. He was an early pioneer of steam-powered road and rail transport, and his most significant contributions were the development of the first high-pressure steam engine and the first working railway steam locomotive. The world's first locomotive-hauled railway journey took place on 21 February 1804, when Trevithick's unnamed steam locomotive hauled a train along the tramway of the Penydarren Ironworks, in Merthyr Tydfil, Wales.

<span class="mw-page-title-main">Safety valve</span> Device for releasing excess pressure in a system

A safety valve is a valve that acts as a fail-safe. An example of safety valve is a pressure relief valve (PRV), which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits. Pilot-operated relief valves are a specialized type of pressure safety valve. A leak tight, lower cost, single emergency use option would be a rupture disk.

<span class="mw-page-title-main">William Fairbairn</span> Scottish civil engineer and shipbuilder

Sir William Fairbairn, 1st Baronet of Ardwick was a Scottish civil engineer, structural engineer and shipbuilder. In 1854 he succeeded George Stephenson and Robert Stephenson to become the third president of the Institution of Mechanical Engineers.

<i>Locomotion</i> No. 1 Early steam locomotive (built 1825)

Locomotion No. 1 is an early steam locomotive that was built in 1825 by the pioneering railway engineers George and Robert Stephenson at their manufacturing firm, Robert Stephenson and Company. It became the first steam locomotive to haul a passenger-carrying train on a public railway, the Stockton and Darlington Railway (S&DR).

<span class="mw-page-title-main">Live steam</span> Steam-powered models and toys

Live steam is steam under pressure, obtained by heating water in a boiler. The steam may be used to operate stationary or moving equipment.

<i>Steam Horse</i> locomotive Early British locomotive (1813-1815)

The Steam Horse was an early railway steam locomotive constructed by the Butterley Company in Derbyshire in 1813 by William Brunton (1777–1851). Also known as the Mechanical Traveller, it had a pair of mechanical legs, with feet that gripped the ground behind the engine to push it forwards along the rails at about three miles an hour.

<span class="mw-page-title-main">Boiler explosion</span> Catastrophic failure of a boiler

A boiler explosion is a catastrophic failure of a boiler.

<span class="mw-page-title-main">Fusible plug</span> Thermally triggered safety valve

A fusible plug is a threaded cylinder of metal, usually bronze, brass or gunmetal, with a tapered hole drilled completely through its length. This hole is sealed with a metal of low melting point that flows away if a predetermined high temperature is reached. The initial use of the fusible plug was as a safety precaution against low water levels in steam engine boilers, but later applications extended its use to other closed vessels, such as air conditioning systems and tanks for transporting corrosive or liquefied petroleum gases.

<span class="mw-page-title-main">Philadelphia, Tyne and Wear</span> Human settlement in England

Philadelphia is a village in the City of Sunderland, England. It lies on the A182 road between Newbottle and Shiney Row. It is named after the American city of Philadelphia.

<span class="mw-page-title-main">Flued boiler</span> Type of boiler used to make steam

A shell or flued boiler is an early and relatively simple form of boiler used to make steam, usually for the purpose of driving a steam engine. The design marked a transitional stage in boiler development, between the early haystack boilers and the later multi-tube fire-tube boilers. A flued boiler is characterized by a large cylindrical boiler shell forming a tank of water, traversed by one or more large flues containing the furnace. These boilers appeared around the start of the 19th century and some forms remain in service today. Although mostly used for static steam plants, some were used in early steam vehicles, railway locomotives and ships.

<span class="mw-page-title-main">Launch-type boiler</span>

A launch-type, gunboat or horizontal multitubular boiler is a form of small steam boiler. It consists of a cylindrical horizontal shell with a cylindrical furnace and fire-tubes within this.

<span class="mw-page-title-main">South African Class 15C 4-8-2</span> 1925 design of steam locomotive

The South African Railways Class 15C 4-8-2 of 1925 was a steam locomotive.

<span class="mw-page-title-main">South African Class 14C 4-8-2, 4th batch</span> 1922 design of steam locomotive

The South African Railways Class 14C 4-8-2 of 1922 was a steam locomotive.

<span class="mw-page-title-main">South African Class 14C 4-8-2, 1st batch</span> 1918 design of steam locomotive

The South African Railways Class 14C 4-8-2 of 1918 was a steam locomotive.

References