External links
- Accident Returns: Extract for Accident at Rednal on 7 June 1865
- Engraved plate taken from The Illustrated London News
| Before 1850 |
|
|---|---|
| 1850s |
|
| 1860s |
|
| 1870s |
|
| 1880s |
|
| 1890s |
|
| Rednal rail crash | |
|---|---|
| Details | |
| Date | 7 June 1865 |
| Location | Rednal station, Shropshire |
| Country | England |
| Line | Shrewsbury to Chester Line |
| Cause | Derailment due to excessive speed |
| Statistics | |
| Trains | 1 |
| Deaths | 13 |
| Injured | 30 |
| List of UK rail accidents by year | |
The Rednal rail crash was a rail accident that occurred near Rednal station in Shropshire.
On 7 June 1865 a permanent way (groundwork and rails) gang were lifting and packing the "up" line 600 yards (550 m) north of Rednal station on a 1 in 132 gradient that falls from Whittington. A green flag had been set 1,100 yards (1,000 m) away at the top of the incline as a warning. At 12:29 an excursion train from Birkenhead left Chester for Shrewsbury consisting of 28 coaches and two brake vans and hauled by two locomotives. An additional four coaches were added at Gobowen.
When the train reached Whittington it began to gain speed on the gradient, but the driver of the front locomotive did not see the flag warning of the work ahead. The brakes were applied when the workmen were sighted, but it was too late to stop such a heavy train. The lead locomotive derailed on the unsupported track, but continued along the ballast until it reached points outside Rednal station where it ran off the rails and turned over. The extreme weight of the following train meant that the first four carriages were destroyed completely, killing 11 passengers and two train crew.
The enquiry, while criticizing the lack of braking power on such a massive train, blamed mainly the inadequate protection of the permanent way work, which should be supplemented by detonators.
| Before 1850 |
|
|---|---|
| 1850s |
|
| 1860s |
|
| 1870s |
|
| 1880s |
|
| 1890s |
|
A rack railway is a steep grade railway with a toothed rack rail, usually between the running rails. The trains are fitted with one or more cog wheels or pinions that mesh with this rack rail. This allows the trains to operate on steep gradients of 100% or more, well above the 10% maximum for friction-based rail. The rack and pinion mechanism also provides more controlled braking and reduces the effects of snow or ice on the rails. Most rack railways are mountain railways, although a few are transit railways or tramways built to overcome a steep gradient in an urban environment. The first cog railway was the Middleton Railway between Middleton and Leeds in West Yorkshire, England, United Kingdom, where the first commercially successful steam locomotive, Salamanca, ran in 1812. This used a rack and pinion system designed and patented in 1811 by John Blenkinsop.
The Snowdon Mountain Railway is a narrow gauge rack-and-pinion mountain railway in Gwynedd, north-west Wales. It is a tourist railway that travels for 4.7 miles (7.6 km) from Llanberis to the summit of Snowdon, the highest peak in Wales. A return journey, including the stop at the summit, takes 2½ hours.
The Rimutaka Incline was a 3-mile-long (4.8 km), 3 ft 6 in gauge railway line on an average grade of 1-in-15 using the Fell system between Summit and Cross Creek stations on the Wairarapa side of the original Wairarapa Line in the Wairarapa district of New Zealand. The term "Rimutaka Incline" is sometimes used incorrectly to refer to other parts or all of the closed and deviated section of the Wairarapa Line between Upper Hutt and Speedy's Crossing, near Featherston. The incline formation is now part of the Remutaka Rail Trail.
Rail transport terms are a form of technical terminology applied to railways. Although many terms are uniform across different nations and companies, they are by no means universal, with differences often originating from parallel development of rail transport systems in different parts of the world, and in the national origins of the engineers and managers who built the inaugural rail infrastructure. An example is the term railroad, used in North America, and railway, generally used in English-speaking countries outside North America and by the International Union of Railways. In English-speaking countries outside the United Kingdom, a mixture of US and UK terms may exist.
The Fell system was a third-rail system for railways that were too steep to be worked by adhesion on the running rails alone. It used a raised centre rail between the two running rails to provide extra traction and braking, or braking alone. Trains were propelled by wheels horizontally applied and retracted by springs onto the centre rail, controlled from the footplate, as well as by the normal running wheels. In practice, the running wheels could be allowed to run freely to reduce wear, but the centre brake shoes needed to be replaced frequently. For example: the locomotives' shoes were replaced after each journey on the Mont Cenis Pass Railway. Extra brake shoes were fitted to specially designed or adapted Fell locomotives and brake vans, and for traction the prototype locomotive had auxiliary cylinders powering the horizontal wheels. The Fell system was developed in the 1860s and was soon superseded by various types of rack railway for new lines, but some Fell systems remained in use into the 1960s. The Snaefell Mountain Railway still uses the Fell system for (emergency) braking, but not for traction.
Automatic Warning System (AWS) is a railway safety system invented and predominantly used in the United Kingdom. It provides a train driver with an audible indication of whether the next signal they are approaching is clear or at caution. Depending on the upcoming signal state, the AWS will either produce a 'horn' sound, or a 'bell' sound. If the train driver fails to acknowledge a warning indication, an emergency brake application is initiated by the AWS. However if the driver correctly acknowledges the warning indication by pressing an acknowledgement button, then a visual 'sunflower' is displayed to the driver, as a reminder of the warning.
The Nuneaton rail crash occurred on 6 June 1975, on the West Coast Main Line just south of Nuneaton railway station in Warwickshire, England, United Kingdom.
The Ruislip Lido Railway is a 12 in gauge miniature railway around Ruislip Lido in Ruislip, 14 miles (22.5 km) north-west of central London. Running from the main station at Woody Bay by the lido's beach, on a 1.02-mile (1.64 km) track around the reservoir, the railway passes through Ruislip Woods to Willow Lawn station and tea room near the lido's car parks. It is the longest 12 in gauge railway in the United Kingdom.
The Harrow and Wealdstone rail crash was a three-train collision at Harrow and Wealdstone station in Wealdstone, Middlesex during the morning rush hour of 8 October 1952. The crash resulted in 112 deaths and 340 injuries, 88 of these being detained in hospital. It remains the worst peacetime rail crash in British history and the second deadliest overall after the Quintinshill rail disaster of 1915.
Over the latter years of the 19th and early years of the 20th centuries, Penistone in Yorkshire gained a name as an accident black-spot on Britain's railway network; indeed, it could be said to hold the title of the worst accident black-spot in the country. The main line through the town was the Woodhead route of the Manchester, Sheffield and Lincolnshire Railway between Sheffield Victoria and Manchester, London Road. The line was heavily graded with a summit some 400 yards inside the eastern portal of the Woodhead tunnel.
The Staplehurst rail crash was a derailment at Staplehurst, Kent, on 9 June 1865 at 3:13 pm. The South Eastern Railway Folkestone to London boat train derailed while crossing a viaduct where a length of track had been removed during engineering works, killing ten passengers and injuring forty. In the Board of Trade report it was found that a man had been placed with a red flag 554 yards (507 m) away but the regulations required him to be 1,000 yards (910 m) away and the train had insufficient time to stop.
The Shipton-on-Cherwell train crash was a major disaster which occurred on the Great Western Railway. It involved the derailment of a long passenger train at Shipton-on-Cherwell, near Kidlington, Oxfordshire, England, on Christmas Eve, 24 December 1874, and was one of the worst disasters on the Great Western Railway.
The Thirsk rail crash occurred on 31 July 1967 at Thirsk, Yorkshire, England on the British Rail East Coast Main Line.
The Long Melford–Bury St Edmunds branch line was a railway between Long Melford on the Stour Valley Railway and Bury St Edmunds on the Ipswich to Ely Line. The line opened on 9 August 1865 and closed to passengers on 10 April 1961 and freight on 19 April 1965.
The Coton Hill rail crash was a train crash which occurred on 11 January 1965, at Coton Hill, near Shrewsbury in Shropshire, England.
The Knowle and Dorridge rail crash was a fatal rail crash that occurred at Dorridge railway station in Warwickshire, England, on 15 August 1963. Three people died in the crash after a signalman's error routed a small freight train into the path of an express passenger train which slowed but could not stop before colliding with it.
The Round Oak railway accident happened on 23 August 1858 between Brettell Lane and Round Oak railway stations, on the Oxford, Worcester and Wolverhampton Railway. The breakage of a defective coupling caused seventeen coaches and one brake van, containing about 450 passengers, of an excursion train to run backwards down the steep gradient between the stations, colliding with a following second portion of the excursion. 14 passengers were killed and 50 injured in the disaster. In the words of the Board of Trade accident inspector, Captain H. W. Tyler, it was at the time "decidedly the worst railway accident that has ever occurred in this country".
The King's Cross railway accident occurred on 4 February 1945, at London King's Cross railway station on the East Coast Main Line of the London & North Eastern Railway. Two passengers were killed and 25 injured, as well as the train attendant.
The Slough rail accident happened on 16 June 1900 at Slough railway station on the Great Western Main Line when an express train from London Paddington to Falmouth Docks ran through two sets of signals at danger, and collided with a local train heading for Windsor & Eton Central. Five passengers were killed; 35 were seriously injured, and 90 complained of shock or minor injuries
The Glasgow Queen Street railway accident occurred on 12 October 1928, in the tunnel adjacent to Glasgow Queen Street railway station on the Glasgow to Edinburgh line of the London & North Eastern Railway. A train climbing the steep 1 in 42–44 gradient through the tunnel slipped to a standstill and rolled back, colliding with an empty local train which was shunting. Three passengers were killed and 52 injured, and three train crew were also injured. Full details are in the Railway Inspectorate accident report; the investigation was carried out by Colonel A.C. Trench.
