This article contains weasel words: vague phrasing that often accompanies biased or unverifiable information.(January 2018) |
Developer(s) | Keysight Technologies PathWave Design |
---|---|
Initial release | 1985 (then called Microwave Design System (MDS)) |
Operating system | Linux, Windows |
Platform | ADS platforms |
Type | Electronic circuit simulation |
License | Proprietary |
Website | Official website |
Advanced Design System (ADS) is an electronic design automation software system produced by PathWave Design, a division of Keysight Technologies. [1] It provides an integrated design environment to designers of RF electronic products such as mobile phones, [2] pagers, wireless networks, satellite communications, radar systems, and high-speed data links. [3]
Keysight ADS supports every step of the design process — schematic capture, layout, design rule checking, frequency-domain and time-domain circuit simulation, and electromagnetic field simulation — allowing the engineer to fully characterize and optimize an RF design without changing tools.
Keysight has donated copies of the ADS software to the electrical engineering departments at many universities. [4]
The deprecated Tektronix ADS is another, unrelated, electronic design automation system composed of TekSpice and QuickIC.
Mentor Graphics Corporation was a US-based electronic design automation (EDA) multinational corporation for electrical engineering and electronics, headquartered in Wilsonville, Oregon. Founded in 1981, the company distributed products that assist in electronic design automation, simulation tools for analog mixed-signal design, VPN solutions, and fluid dynamics and heat transfer tools. The company leveraged Apollo Computer workstations to differentiate itself within the computer-aided engineering (CAE) market with its software and hardware.
Electronic design automation (EDA), also referred to as electronic computer-aided design (ECAD), is a category of software tools for designing electronic systems such as integrated circuits and printed circuit boards. The tools work together in a design flow that chip designers use to design and analyze entire semiconductor chips. Since a modern semiconductor chip can have billions of components, EDA tools are essential for their design; this article in particular describes EDA specifically with respect to integrated circuits (ICs).
LS-DYNA is an advanced general-purpose multiphysics simulation software package developed by the former Livermore Software Technology Corporation (LSTC), which was acquired by Ansys in 2019. While the package continues to contain more and more possibilities for the calculation of many complex, real world problems, its origins and core-competency lie in highly nonlinear transient dynamic finite element analysis (FEA) using explicit time integration. LS-DYNA is used by the automobile, aerospace, construction and civil engineering, military, manufacturing, and bioengineering industries.
Silvaco Group, Inc., develops and markets electronic design automation (EDA) and technology CAD (TCAD) software and semiconductor design IP (SIP). The company is headquartered in Santa Clara, California, and has offices in North America, Europe, and throughout Asia. Founded in 1984, Silvaco is a publicly traded EDA company. The company has been known by at least two other names: Silvaco International, and Silvaco Data Systems.
Naval Surface Warfare Center Crane Division is the principal tenant command located at Naval Support Activity Crane in Indiana.
Dassault Systèmes Simulia Corp. is a computer-aided engineering (CAE) vendor. Formerly known as Abaqus Inc. and previously Hibbitt, Karlsson & Sorensen, Inc., (HKS), the company was founded in 1978 by David Hibbitt, Bengt Karlsson and Paul Sorensen, and has its headquarters in Providence, Rhode Island.
Ansys HFSS is a commercial finite element method solver for electromagnetic (EM) structures from Ansys.
CR-5000 is Zuken's EDA design suite for electronic systems and printed circuit boards aimed at the enterprise market. It was developed to address complex design needs that involve managing the complete development and manufacturing preparation process on an enterprise-wide scale. CR-5000 is made to facilitate the design of complex and high-speed boards, with features aimed at addressing challenges such as signal integrity and electromagnetic compatibility.
Cadence Design Systems, Inc. is an American multinational technology and computational software company. Headquartered in San Jose, California, Cadence was formed in 1988 through the merger of SDA Systems and ECAD. Initially specialized in electronic design automation (EDA) software for the semiconductor industry, currently the company makes software and hardware for designing products such as integrated circuits, systems on chips (SoCs), printed circuit boards, and pharmaceutical drugs, also licensing intellectual property for the electronics, aerospace, defense and automotive industries, among others.
Aldec, Inc. is a privately owned electronic design automation company based in Henderson, Nevada, providing software and hardware used in creation and verification of digital designs targeting FPGA and ASIC technologies.
PathWave Design is a division of Keysight Technologies that was formerly called EEsof. It is a provider of electronic design automation (EDA) software that helps engineers design products such as cellular phones, wireless networks, radar, satellite communications systems, and high-speed digital wireline infrastructure. Applications include electronic system level (ESL), high-speed digital, RF-Mixed signal, device modeling, RF and Microwave design for commercial wireless, aerospace, and defense markets.
Momentum is 3-D planar EM simulation software for electronics and antenna analysis, a partial differential equation solver of Maxwell's equations based on the method of moments. It is a 3-D planar electromagnetic (EM) simulator used for passive circuit analysis.
FEM Element is a commercial finite element method solver for electromagnetic structures from EEsof. FEM Element can perform electromagnetic simulation of arbitrarily-shaped, passive three-dimensional structures.
AWR Corporation is an electronic design automation (EDA) software company, formerly known as Applied Wave Research, and then acquired by National Instruments
X-parameters are a generalization of S-parameters and are used for characterizing the amplitudes and relative phase of harmonics generated by nonlinear components under large input power levels. X-parameters are also referred to as the parameters of the Poly-Harmonic Distortion (PHD) nonlinear behavioral model.
IMST is an independent research organization located in North Rhine-Westphalia. It was formed as a privately owned company, with limited liability GmbH, in 1992.
This page is a comparison of electronic design automation (EDA) software which is used today to design the near totality of electronic devices. Modern electronic devices are too complex to be designed without the help of a computer. Electronic devices may consist of integrated circuits (ICs), printed circuit boards (PCBs), field-programmable gate arrays (FPGAs) or a combination of them. Integrated circuits may consist of a combination of digital and analog circuits. These circuits can contain a combination of transistors, resistors, capacitors or specialized components such as analog neural networks, antennas or fuses.
Interactive Scenario Builder (Builder) is a modeling and simulation, three-dimensional application developed by the Advanced Tactical Environmental Simulation Team (ATEST) at the Naval Research Laboratory (NRL) that aids in understanding radio frequency (RF) and electro-optical/infrared (EO/IR) propagation.
Simcenter Amesim is a commercial simulation software for the modeling and analysis of multi-domain systems. It is part of systems engineering domain and falls into the mechatronic engineering field.