Allis-Chalmers Model WC

Last updated
A 1939 Model WC. Allis-Chalmers WC 1939.jpg
A 1939 Model WC.
1942 Model WC at Jarrell Plantation 17 09 111 jarrell.jpg
1942 Model WC at Jarrell Plantation
A 1947 Model WC. 1947 Allis-Chalmers Model WC.jpg
A 1947 Model WC.
A 1948 Model WC. Allis Chalmers WC (1948) at a US tractor show.jpg
A 1948 Model WC.

The Model WC was a tractor made by Allis-Chalmers from 1933 to 1948. The WC was designed from its start as a nimble, low-cost, but well-powered row-crop tractor that would make the best use of pneumatic rubber tires, which Allis-Chalmers had just introduced to agriculture in 1932. [1] [2] A successful model at the historical height of row-crop tractor demand, the WC was the best-selling tractor model that Allis-Chalmers ever built.

Contents

The WC was the Model W variant tailored to cultivating, thus the W + C (for "cultivating") name. Other W variants, such as the WD and WF, followed later (in lower numbers).

The WC was popular in the Great Depression for its good value, affordable price, and frugal design elements. Two factors that lowered its cost of manufacture, and thus its sales price, [2] were that it was made partially from off-the-shelf components, and that its steel channel iron frame eliminated the need for large, heavy castings for the transmission and rear end (as were often used in tractors of the era). Its power was ample for the time and class, allowing it to pull a two-bottom plow.

Production and pricing

With its minimalist design and low price, about 178,000 WCs were made from 1934 to 1948. [2] The WC was assembled at the West Allis, Wisconsin, plant, [3] near Milwaukee. In 1934, the WC was listed at USD $825 on rubber (standard), $675 on steel (optional). [2] By 1936, the prices were $960 and $785, respectively. [4] The tractor could also be ordered as "air front", meaning rubber tires in front and steel wheels in back. [4]

Features and configurations

Engine

The WC had a 201 cubic inches (3,290 cc), inline-four engine. Like most tractors of the era, the WC offered multifuel capability, running on gasoline, kerosene, or alcohol, and featured a small auxiliary fuel tank in addition to the larger main fuel tank, so that the tractor could be started on gasoline when cold and, once warmed up, switched to kerosene or alcohol.

The engine's 4 in (100 mm) bore and 4 in (100 mm) stroke made it one of the first tractor engines (to Buescher's knowledge, the first [5] ) to be square or oversquare, that is, to have an equal or shorter stroke than bore. The WC engine tested at 22 horsepower at the drawbar and 30 at the belt. [3] Its "snappy governor […] seemed to sense a heavy load, even before the load arrived." [5]

Ignition was by magneto.

Rubber tires

The WC was the first farm tractor to have rubber tires as standard equipment, [2] and the first tractor tested on rubber in the Nebraska tractor tests. [3] The pneumatic-rubber-tire-on-steel-wheel combination was more expensive to make than a steel wheel with cleats. To make rubber tires standard equipment while also keeping the cost of the tractor low, the WC's designers, C.E. Frudden and Walter Strehlow, gave the WC drop gearing at the rear (bull-gear-with-pinion final drives), which allowed row-crop ground clearance while having smaller-diameter drive wheels. [5] Drop gearing had appeared many times before on earlier tractors, but never yet for this new reason—to minimize the amount of rubber needed for the tires.

Front axle options

Like other row-crop tractors from various makers, the WC could be ordered in both tricycle (narrow tread) and wide tread (that is, wide front track) versions, with the tricycle configuration by far the most popular. [4] The tractor could be ordered as "air front", meaning rubber tires in front and steel wheels in back. [4]

Electric starter and lights

In 1939 Harry Merritt, an Allis-Chalmers executive, decided that, with over 90 percent of WCs selling with the optional electric starter and lights, these features would henceforth be standard equipment. Thus the WC became one of the earliest farm tractors (to Buescher's knowledge, the first [6] ) to have starter and lights as standard equipment.

Other options

A belt pulley was standard equipment on the WC, while a power take-off (PTO) and a mechanical power lift for the cultivator were optional. [4] In 1936 the PTO option's list price was USD $50, the power lift option's, $35. [4]

The PTO was necessary if the buyer was planning to use the WC to pull the Allis-Chalmers All-Crop Harvester, a pull-type combine. The combination of a WC tractor pulling an All-Crop Harvester combine was a huge commercial success for Allis from the mid-1930s through mid-1940s.

Design changes

Various design changes occurred over the model's lifespan:

Drawbacks

The WC, with many good features and various first-to-market attributes, had at least a few drawbacks. Its clutch was not particularly well designed, [7] and, like other tractors of the 1920s through mid-1930s, it lacked usability in the design of its brake controls, [7] with a hand lever on each side of the tractor, which meant that applying the brakes took the operator's hands away from other controls. Other tractors had foot pedals on both sides, but that meant that the clutch and left brake could not be operated simultaneously. The solution came in the late 30s, when various brands moved both brake pedals to the right foot.

See also

Related Research Articles

<span class="mw-page-title-main">Tractor</span> Engineering vehicle specifically designed to deliver a high tractive effort

A tractor is an engineering vehicle specifically designed to deliver a high tractive effort at slow speeds, for the purposes of hauling a trailer or machinery such as that used in agriculture, mining or construction. Most commonly, the term is used to describe a farm vehicle that provides the power and traction to mechanize agricultural tasks, especially tillage, and now many more. Agricultural implements may be towed behind or mounted on the tractor, and the tractor may also provide a source of power if the implement is mechanised.

<span class="mw-page-title-main">Oldsmobile 98</span> Flagship car model produced by Oldsmobile from 1940 to 1996

The Oldsmobile 98 is the full-size flagship model of Oldsmobile that was produced from 1940 until 1942, and then from 1946 to 1996. The name – reflecting a "Series 90" fitted with an 8-cylinder engine – first appeared in 1941 and was used again after American consumer automobile production resumed post-World War II. It was, as it would remain, the division's top-of-the-line model, with lesser Oldsmobiles having lower numbers such as the A-body 66 and 68, and the B-body 76 and 78. The Series 60 was retired in 1949, the same year the Oldsmobile 78 was replaced by the 88. The Oldsmobile 76 was retired after 1950. This left the two remaining number-names to carry on into the 1990s as the bread and butter of the full-size Oldsmobile lineup until the Eighty Eight-based Regency replaced the 98 in 1997.

<span class="mw-page-title-main">Allis-Chalmers</span> American industrial machinery manufacturer

Allis-Chalmers was a U.S. manufacturer of machinery for various industries. Its business lines included agricultural equipment, construction equipment, power generation and power transmission equipment, and machinery for use in industrial settings such as factories, flour mills, sawmills, textile mills, steel mills, refineries, mines, and ore mills.

<span class="mw-page-title-main">Ford N-series tractor</span> Motor vehicle

The Ford N-series tractors were a line of farm tractors produced by Ford between 1939 and 1952, spanning the 9N, 2N, and 8N models.

<span class="mw-page-title-main">Allis-Chalmers Model B</span> Utility tractor

The Allis-Chalmers model B was a small agricultural tractor produced by the Allis-Chalmers Manufacturing company from 1937 to 1957. With over 125,000 units produced, the model B became one of the best selling and longest-produced tractors for Allis-Chalmers. The B came in several different variations including the Asparagus B, Potato Special, and the IB industrial tractor, and gave rise to the larger Allis-Chalmers Model C. The Model B was styled by Brooks Stevens, an industrial designer and graphic designer.

<span class="mw-page-title-main">Massey-Harris Model 101</span>

The Massey-Harris Model 101 was a tractor built by Massey-Harris from 1938 to 1946. Developed under the guidance of James S. Duncan, who gambled corporate losses would drop and won, the 101 introduced the Chrysler L-head inline six. The six would compete with Oliver's straight-six Model 70, while saving money on development of a whole new engine as well as taking advantage of Chrysler's existing parts and service network.

<span class="mw-page-title-main">Allis-Chalmers 190XT</span> Motor vehicle

The Allis-Chalmers 190XT, also known as the One-Ninety XT, is a row crop tractor produced by Allis Chalmers from 1964 to 1971. The tractors are powered by diesel fuel, gasoline, or LP gas. As its model number implies, it was based on the Allis-Chalmers D19, though it featured many alterations and improvements over the D19. The only difference between the 190 and the 190XT is the addition of a turbocharger on the 190XT diesels. Gasoline-run 190XT's also have a G2800 engine as opposed to the 190's G2500 engine. The stock 190XT is rated at about 93 PTO horsepower.

The Gleaner Manufacturing Company is an American manufacturer of combine harvesters. Gleaner has been a popular brand of combine harvester particularly in the Midwestern United States for many decades, first as an independent firm, and later as a division of Allis-Chalmers. The Gleaner brand continues today under the ownership of AGCO.

<span class="mw-page-title-main">Challenger Tractor</span> Agriculture tractor brand

Challenger is an American brand of agricultural tractors. Created by Caterpillar Inc. in 1986, the brand was sold to AGCO in 2002. Since then, Challenger tractors have been manufactured at the company's Jackson, Minnesota facility.

The All-Crop harvester or All-Crop combine was a tractor-drawn, PTO-driven combine harvesters made by Allis-Chalmers from the mid-1930s to the early 1960s. Aside from small grains, these harvesters were able to harvest some flowers, as well as various grasses and legume crops for seed.

<span class="mw-page-title-main">Allis-Chalmers D series</span> Line of tractors

The Allis-Chalmers D series is a line of tractors made by the Allis-Chalmers Manufacturing Company from 1957 to 1969.

<span class="mw-page-title-main">John Deere 4020</span> Tractor model

The John Deere 4020 was an agricultural tractor model made by John Deere from 1964 to 1972. It replaced the nearly identical 4010 that had been introduced with Deere's New Generation series in 1960 and offered a number of improvements over the previous model including more horsepower, heavier rear axles, and a differential lock. The 4020 was produced with three engine options: diesel, petrol, and LPG. The 4020 Diesel has a six-cylinder engine tested at 84 drawbar and 91 PTO horsepower. John Deere's Syncro Range transmission with 8 forward speeds and two reverse speeds was standard, a power shift transmission was optional. Other options included dual rear wheels and an enclosed cab with heat and air conditioning. The 4020 is significant for its great popularity; over 184,000 units were built. It was the most popular tractor of its time.

<span class="mw-page-title-main">Allis-Chalmers Model 6-12</span>

The Allis-Chalmers Model 6-12 was a farm tractor produced by Allis-Chalmers between 1918 and 1923. Like many other tractors of the era, its model name came from its horsepower ratings, with 6-12 meaning 6 hp at the drawbar and 12 hp at the belt pulley.

<span class="mw-page-title-main">Ford NAA tractor</span> Motor vehicle

The Ford NAA tractor is a tractor that was introduced by Ford as an entirely new model in 1953 and dubbed the Golden Jubilee.

The Farmall 04 series tractors are a family of row-crop tractors with four-cylinder engines, continuing the tradition of four-cylinder engines in Farmall and parent company International Harvester for general-purpose and row-crop tractors. In the early 1960s demand for more power led to the 06 series with six-cylinder engines. Four-cylinder engines were reserved for tractors equivalent to the Farmall H and smaller.

<span class="mw-page-title-main">Cockshutt 30</span> Row crop tractor

The Cockshutt 30 row-crop tractor was the first production tractor to be manufactured in Canada. The Cockshutt Plow Company had previously imported rebranded Oliver and Allis-Chalmers tractors from the United States. The Model 30 marked Cockshutt's emergence as a full-line agricultural manufacturer. The tractors were built in Cockshutt's Brantford, Ontario plant. The Model 30 was noted for its introduction of a live power take-off (PTO), the first such accessory that could be operated whether the tractor was moving or stationary. Through the model's production span it was itself resold in the United States as the CO-OP E3 and the Gambles Farmcrest 30.

<span class="mw-page-title-main">Cockshutt 40</span> Row crop tractor

The Cockshutt 40 row-crop tractor was the second tractor produced by the Cockshutt Plow Company, from 1949 to 1958. Having developed the medium-sized Cockshutt 30, Cockshutt developed the heavier 40, using a six-cylinder engine. The 40 was rated for four plows. It was sold in the United States as the CO-OP E4.

<span class="mw-page-title-main">Cockshutt 50</span> Row crop tractor

The Cockshutt 50 row-crop tractor was a row-crop tractor produced by the Cockshutt Plow Company, from 1953 to 1957. It was the largest of a series of Canadian-produced tractors that started with the Cockshutt 30, and was based on the Cockshutt 40 with a more powerful engine. The 50 was a large four or five-plow tractor for general use. The 50 was sold in the United States as the CO-OP E5.

<span class="mw-page-title-main">Allis-Chalmers Model C</span> Row crop tractor

The Allis-Chalmers Model C was a small row-crop tractor manufactured by Allis-Chalmers from 1940 to 1949. It was developed from the smaller Allis-Chalmers Model B.

References

  1. Buescher 1991 , pp. 38–39.
  2. 1 2 3 4 5 Sanders 1996, pp. 37–39.
  3. 1 2 3 TractorData.com, Allis-Chalmers Model WC data , retrieved 2013-01-27.
  4. 1 2 3 4 5 6 Buescher 1991 , pp. 27–30.
  5. 1 2 3 Buescher 1991 , p. 97.
  6. Buescher 1991 , p. 94.
  7. 1 2 Buescher 1991 , p. 98.

Bibliography

Commons-logo.svg Media related to Allis-Chalmers WC at Wikimedia Commons