Amiga 3000

Last updated
Amiga 3000
Amiga 3000 Front with White BG.jpg
Amiga 3000 Front
TypePersonal computer
Release dateJune 1990 (1990-06)
Introductory priceUS$3,379(equivalent to $7,600 in 2022)
Discontinued1992
Units sold14,380 units in Germany (including Amiga 3000T sales)
Operating system Kickstart 1.3 or 2.x,
Unix SVR4
CPU Motorola 68030 @ 16 or 25 MHz
Memory2 MB [1]
Predecessor Amiga 2000, Amiga 2500
Successor Amiga 4000

The Amiga 3000, or A3000, is a personal computer released by Commodore in June 1990. It is the successor to the Amiga 2000 and its upgraded model Amiga 2500 with more processing speed, improved graphics, and a new revision of the operating system.

Contents

Its predecessors, the Amiga 500, 1000 and 2000, share the same fundamental system architecture and consequently perform without much variation in processing speed despite considerable variation in purchase price. The A3000 however, was entirely reworked and rethought as a high-end workstation. The new Motorola 32-bit 68030 CPU, 68882 math co-processor, and 32-bit system memory increase the integer processing speed by a factor of 5 to 18, and the floating-point processing speed by a factor of 7 to 200 times. The new 32-bit Zorro III expansion slots provide for faster and more powerful expansion capabilities. [2]

In common with earlier Amigas the 3000 runs a 32-bit operating system called AmigaOS. Version 2.0 is generally considered to have a more ergonomic and attractive interface than previous versions, which were designed with television sets as a lowest common denominator display. Access for application developers was simplified.

The A3000UX is an A3000 variant bundled with the UNIX System V operating system. Commodore had a licensing agreement with AT&T to include a port of Unix System V (release 4). Commodore also sold a tower variant called the A3000T.

An enhanced version, the Amiga 3000+, with the AGA chipset and an AT&T DSP3210 signal processing chip was produced to prototype stage in 1991. Although this system was never released, Commodore's negotiations with AT&T over the proper way to bundle their VCOS/VCAS operating system software in a personal computer environment helped Apple Computer deliver their Quadra 660 and Quadra 840 AV-series Macintosh systems, two years later. [3] Instead of the Amiga 3000+, Commodore replaced the A3000 six months behind schedule, in the fall of 1992, with the A4000.

The machine is reported to have sold 14,380 units in Germany (including Amiga 3000T sales). [4]

Technical information

The Amiga 3000 shipped with a Motorola 68030 at either 16 or 25 MHz and 2 MB [1] of RAM. It includes the Enhanced Chip Set (ECS), a display enhancer for use with a VGA monitor, and a DMA SCSI-II controller and hard disk drive. [5]

"Fast RAM" can be increased by fitting DIP (up to 4 MB) or ZIP DRAM chips (up to 16 MB) available in two varieties, Page Mode or Static Column. [1]

The A3000, unlike most Amiga models, supports both ROM-based Kickstarts and disk-based Kickstarts (the early "SuperKickstart" model), although not simultaneously. Kickstart V1.4 is actually a beta version of Kickstart which is loaded from disk. 68040 microprocessors require at least 2.0 ROMs.

The A3000 has a number of Amiga-specific connectors including two DE-9 ports for joysticks, mice, and light pens, a standard 25-pin RS-232 serial port and a 25-pin Centronics parallel port. As a result, at launch the A3000 was compatible with many existing Amiga peripherals, such as MIDI devices, serial modems, and sound samplers. [5]

The A3000 has four internal 32-bit Zorro III expansion slots. This expansion bus allows the use of devices which comply with the AutoConfig standard, such as graphic cards, audio cards, network cards, and later even USB controllers. [2]

The two passive ISA slots can be activated by use of a bridgeboard, which connects the Zorro and ISA buses. Such bridgeboards typically feature on-board IBM-PC-compatible hardware, including Intel 80286, 80386 or 80486 microprocessors allowing emulation of an entire IBM PC system in hardware. A compatible ISA card may then be installed in the remaining ISA slot. [5]

Specifications

AttributeSpecification [5]
Processor Motorola 68030 at 16 or 25 MHz
FPU 68881 (16 MHz) or 68882 (25 MHz)
RAM 2  MB (configured as 1 MB "chip" and 1 MB "fast" RAM)

Maximum 2 MB 32-bit [lower-alpha 1] chip RAM and 16 MB fast RAM on-board
Upgradable by further 128 MB via the CPU slot and 2 GB by Zorro III expansions [1]

ROM 512  KB [1] Kickstart ROM [lower-alpha 2]
Chipset Enhanced Chip Set (ECS)
Video 12-bit color palette (4096 colors)

Graphic modes from:

  • 320×200 to 320×512 with 32, 64 (EHB mode) or 4096 (HAM mode) on-screen colors
  • 640×200 to 640×512 with 16 on-screen colors
  • 1280×200 to 1280×512 with 4 on-screen colors

Horizontal scan rates of 15.60-31.44 kHz
Vertical scan rates of 50–72 Hz
Built-in "display enhancer" (scan-doubler and de-interlacer) for use with VGA monitor

Audio4 × 8-bit PCM channels (2 stereo channels)

28–56 kHz maximum DMA sampling rate (dependent on video mode in use)

Internal storage 40, 50 or 100 MB 3.5-inch SCSI hard disk drive (upgradable)
Removable storage3.5-inch floppy disk drive, double density (880 kB capacity) or high density (1760 kB capacity)
Input/output portsAnalog RGB video out (DB-23M)

Analog VGA out (DB-15F)
Audio out (2 × RCA)
Keyboard (5-pin DIN)
2 × Mouse/Gamepad ports (DE9)
RS-232 serial port (DB-25M)
Centronics style parallel port (DB-25F)
Floppy disk drive port (DB-23F)
50-pin internal SCSI connector
External SCSI connector (DB-25F)

Expansion slots4 × 100pin 32-bit Zorro III slots

1 × video slot (inline with Zorro slot)
2 × passive 16-bit ISA slots (requires bridgeboard to activate)
1 × 200-pin CPU expansion slot
8 × 30-pin DIP slots
32 × ZIP slots

Operating system AmigaOS 1.3 (Kickstart 1.3/Workbench 1.3) or AmigaOS 2.0 (Kickstart 2.04/Workbench 2.04)
Other2 × front-accessible 3.5-inch drive bays

1 × internal 3.5-inch drive mounting
Battery backed real-time clock

See also

Notes

  1. Chip RAM is 32-bit for CPU access only
  2. Early models came with a 1.4 beta Kickstart for selectively booting 1.3 or 2.0 from disk, later models used a real 2.0 Kickstart ROM

Related Research Articles

<span class="mw-page-title-main">Amiga</span> Family of personal computers sold by Commodore

Amiga is a family of personal computers introduced by Commodore in 1985. The original model is one of a number of mid-1980s computers with 16- or 16/32-bit processors, 256 KB or more of RAM, mouse-based GUIs, and significantly improved graphics and audio compared to previous 8-bit systems. These systems include the Atari ST—released earlier the same year—as well as the Macintosh and Acorn Archimedes. Based on the Motorola 68000 microprocessor, the Amiga differs from its contemporaries through the inclusion of custom hardware to accelerate graphics and sound, including sprites and a blitter, and a pre-emptive multitasking operating system called AmigaOS.

<span class="mw-page-title-main">Amiga 500</span> Personal computer by Commodore

The Amiga 500, also known as the A500, was the first popular version of the Amiga home computer, "redefining the home computer market and making so-called luxury features such as multitasking and colour a standard long before Microsoft or Apple sold these to the masses". It contains the same Motorola 68000 as the Amiga 1000, as well as the same graphics and sound coprocessors, but is in a smaller case similar to that of the Commodore 128.

<span class="mw-page-title-main">Amiga 1000</span> 1985 personal computer

The Amiga 1000, also known as the A1000, is the first personal computer released by Commodore International in the Amiga line. It combines the 16/32-bit Motorola 68000 CPU which was powerful by 1985 standards with one of the most advanced graphics and sound systems in its class. It runs a preemptive multitasking operating system that fits into 256 KB of read-only memory and was shipped with 256 KB of RAM. The primary memory can be expanded internally with a manufacturer-supplied 256 KB module for a total of 512 KB of RAM. Using the external slot the primary memory can be expanded up to 8.5 MB.

<span class="mw-page-title-main">Industry Standard Architecture</span> Internal expansion bus in early PC compatibles

Industry Standard Architecture (ISA) is the 16-bit internal bus of IBM PC/AT and similar computers based on the Intel 80286 and its immediate successors during the 1980s. The bus was (largely) backward compatible with the 8-bit bus of the 8088-based IBM PC, including the IBM PC/XT as well as IBM PC compatibles.

<span class="mw-page-title-main">Amiga 600</span> Home computer introduced in 1992

The Amiga 600, also known as the A600, is a home computer introduced in March 1992. It is the final Amiga model based on the Motorola 68000 and the 1990 Amiga Enhanced Chip Set. A redesign of the Amiga 500 Plus, it adds the option of an internal hard disk drive and a PCMCIA port. Lacking a numeric keypad, the A600 is only slightly larger than an IBM PC keyboard, weighing approximately 6 pounds (2.72kg). It shipped with AmigaOS 2.0, which was considered more user-friendly than earlier versions of the operating system.

<span class="mw-page-title-main">Amiga 2000</span> Personal computer from Commodore, 1987

The Amiga 2000, or A2000, is a personal computer released by Commodore in March 1987. It was introduced as a "big box" expandable variant of the Amiga 1000 but quickly redesigned to share most of its electronic components with the contemporary Amiga 500 for cost reduction. Expansion capabilities include two 3.5" drive bays and one 5.25" bay that could be used by a 5.25" floppy drive, a hard drive, or CD-ROM once they became available.

Chip RAM is a commonly used term for the integrated RAM used in Commodore's line of Amiga computers. Chip RAM is shared between the central processing unit (CPU) and the Amiga's dedicated chipset. It was also, rather misleadingly, known as "graphics RAM".

<span class="mw-page-title-main">Amiga 4000</span> 1992 personal computer

The Amiga 4000, or A4000, from Commodore is the successor of the Amiga 2000 and Amiga 3000 computers. There are two models: the A4000/040 released in October 1992 with a Motorola 68040 CPU, and the A4000/030 released in April 1993 with a Motorola 68EC030.

Autoconfig is an auto-configuration protocol of Amiga computers which is intended to automatically assign resources to expansion devices without the need for jumper settings. It is analogous to PCI configuration through ACPI.

Released as the expansion bus of the Commodore Amiga 3000 in 1990, the Zorro III computer bus was used to attach peripheral devices to an Amiga motherboard. Designed by Commodore International lead engineer Dave Haynie, the 32-bit Zorro III replaced the 16-bit Zorro II bus used in the Amiga 2000. As with the Zorro II bus, Zorro III allowed for true Plug and Play autodetection wherein devices were dynamically allocated the resources they needed on boot.

This is a list of models and clones of Amiga computers.

<span class="mw-page-title-main">Macintosh Quadra 605</span> Personal computer by Apple Computer

The Macintosh Quadra 605 is a personal computer designed, manufactured, and sold by Apple Computer from October 1993 to July 1996. The model names reflect a decision made at Apple in 1993 to follow an emerging industry trend of naming product families for their target customers – Quadra for business, LC for education, and Performa for home. Accordingly, the Performa 475 and 476 was sold in department stores and electronics stores such as Circuit City, whereas the Quadra was purchased through an authorized Apple reseller.

The Amiga computer can be used to emulate several other computer platforms, including legacy platforms such as the Commodore 64, and its contemporary rivals such as the IBM PC and the Macintosh.

<span class="mw-page-title-main">Amiga Sidecar</span> Commodore expansion hardware device

The Commodore A1060 Sidecar is an expansion hardware device developed by Commodore and released in 1986 for the Amiga 1000 computer. It features a complete PC XT-clone system mounted in an expansion case which connected to the expansion bus on the right side of the Amiga 1000 computer, sitting beside it similar to a motorcycle's sidecar, hence the name.

<span class="mw-page-title-main">Amiga 4000T</span>

The Amiga 4000T, also known as A4000T, is a tower version of Commodore's A4000 personal computer. Using the AGA chipset, it was originally released in small quantities in 1994 with a 25 MHz Motorola 68040 CPU, and re-released in greater numbers by Escom in 1995, after Commodore's demise, along with a new variant which featured a 50 MHz Motorola 68060 CPU. Despite the subsequent demise of Escom, production was continued by QuikPak in North America into at least 1998.

The Commodore PC compatible systems are a range of IBM PC compatible personal computers introduced in 1984 by home computer manufacturer Commodore Business Machines.

<span class="mw-page-title-main">Kickstart (Amiga)</span> Bootstrap firmware used by Amiga computers

Kickstart is the bootstrap firmware of the Amiga computers developed by Commodore International. Its purpose is to initialize the Amiga hardware and core components of AmigaOS and then attempt to boot from a bootable volume, such as a floppy disk. Most Amiga models were shipped with the Kickstart firmware stored on ROM chips.

<span class="mw-page-title-main">Amiga 1200</span> 1992 personal computer

The Amiga 1200, or A1200, is a personal computer in the Amiga computer family released by Commodore International, aimed at the home computer market. It was launched on October 21, 1992, at a base price of £399 in the United Kingdom and $599 in the United States.

In addition to the Amiga chipsets, various specially designed chips have been used in Commodore Amiga computers that do not belong to the 'Amiga chipset' in a tight sense.

<span class="mw-page-title-main">DraCo</span>

The DraCo, also known as DraCo Vision in one of its later models, was a non-linear video editing workstation created by MacroSystem Computer GmbH in 1994, based on the Amiga platform.

References

  1. 1 2 3 4 5 Here, K, M, G, or T refer to the binary prefixes based on powers of 1024.
  2. 1 2 Haynie, Dave (20 March 1991), The Zorro III Bus Specification (PDF), Commodore-Amiga, Inc., archived from the original (PDF) on 16 July 2012, retrieved 2 September 2011
  3. Haynie, Dave (17 July 1991), The Amiga 3000+ System Specification (PDF), Commodore-Amiga, Inc., archived from the original (PDF) on 16 July 2012, retrieved 7 September 2011
  4. Bergseth, M. (November 25, 2014). "AMIGA SOLD IN UNITS BY COMMODORE IN GERMANY REVEALED". Distrita - Where to Go. Archived from the original on July 13, 2017. Retrieved May 15, 2023.{{cite web}}: CS1 maint: bot: original URL status unknown (link)
  5. 1 2 3 4 Introducing the Commodore Amiga 3000 (PDF), Commodore-Amiga, Inc., 1991