B-HNL | |
---|---|
General information | |
Type | Boeing 777-267 |
Manufacturer | Boeing |
Registration | B-HNL N7771 (former) |
Flights | 20519 |
Total hours | 49687 |
History | |
Manufactured | 9 April 1994 |
First flight | 12 June 1994 |
In service | 1994–2018 |
Last flight | 18 September 2018 |
Preserved at | Pima Air & Space Museum in Tucson, Arizona, United States |
Fate | On display |
B-HNL is a Boeing 777-200 aircraft that was built by Boeing Commercial Airplanes as the prototype of the 777. It rolled off the assembly line, originally registered as N7771, on 9 April 1994 and first flew on 12 June. It then spent 11 months in flight testing and certification and on 19 April 1995, the aircraft type was certified by the Federal Aviation Administration (FAA) and the European Joint Aviation Authorities (JAA) with United Airlines being its launch customer. [1] Boeing then delivered the aircraft to Cathay Pacific in 2000, re-registered as B-HNL. It was retired 18 years later, performing its final flight on 18 September 2018 to the Pima Air & Space Museum where it was placed on static display. [2] The Boeing 777 is the world's largest twin-engine jet and the first of two Boeing aircraft to feature fly-by-wire flight controls, followed by the Boeing 787 Dreamliner. [3] [4]
In early 1990, Boeing and eight major airlines — All Nippon Airways, American Airlines, British Airways, Cathay Pacific, Delta Air Lines, Japan Airlines, Qantas, and United Airlines— came together and worked on a new aircraft design. [1] [5] The aircraft, which became the Boeing 777, filled a crucial size and range gap in Boeing's commercial airliner lineup, offering greater passenger capacity than the twin-engine Boeing 767 and improved operating efficiency compared to the quad-engine wide-body Boeing 747. In October 1990, United Airlines placed the first order for the 777— a total of 34 firm orders and 34 options valued at approximately $11 billion (~$22.7 billion in 2023), marking the largest commercial aircraft order at the time. [3] [6]
On 9 April 1994, B-HNL, originally registered as N7771 and with the manufacturer's number WA001, rolled off the assembly line at the Boeing Everett Factory, an airplane factory that was originally constructed to build the massive Boeing 747. The aircraft was originally powered by two Pratt & Whitney PW4074 engines with each delivering about 77,000 lbf (340 kN) pounds of thrust. The aircraft was assigned the serial number 27116. [7] [8] [4]
On 12 June 1994, before the first flight, Philip M. Condit, then-Boeing's president, wished John Cashman, test pilot, good luck and jokingly added, "And no rolls!" This reference alluded to the noteworthy occasion when Alvin M. Johnston famously performed a successful barrel roll in the Dash 80 jet demonstrator on 6 August 1955. At approximately 11:45 a.m. PT, N7771 took to the skies with the flight lasting about 3 hours and 48 minutes, setting a record as the lengthiest first flight for any of Boeing's airliners. During the flight, it reached a peak altitude of 19,000 feet (5,791 meters) and successfully completed all scheduled tests, including the in-flight shutdown and restart of an engine. [9] On 19 April 1995, the aircraft type was certified by the Federal Aviation Administration (FAA) and the European Joint Aviation Authorities (JAA). On 30 May, the FAA granted 180 minutes ETOPS clearance for PW4074-powered 777-200s. [10] : 7
By 2000, Boeing was no longer using N7771 for flight testing and development, and the aircraft was stored near a production facility without engines. As there were no delivery slots for new 777s available due to high demand, Cathay Pacific, finding itself needing an additional aircraft to meet expected demand, inquired about the possibility of refurbishing and purchasing N7771. At the time N7771 had been cannibalized for spare parts, and no longer had its original Pratt & Whitney PW4074 engines. As part of the refurbishment process, Boeing installed Rolls-Royce Trent 884B-17 engines, as used on the rest of Cathay Pacific's 777 fleet. [11] On 6 December 2000, after being repainted and re-registered, B-HNL was delivered to Cathay Pacific. [9]
After almost 18 years of service, Cathay Pacific finally decided to retire B-HNL on 1 June 2018. [9] Cathay Pacific and Boeing both chose the Pima Air & Space Museum to display B-HNL and on 18 September 2018, it performed its final 14-hour flight from China via Hong Kong to Tucson, Arizona. [4] [8]
The Boeing 747 is a long-range wide-body airliner designed and manufactured by Boeing Commercial Airplanes in the United States between 1968 and 2023. After the introduction of the 707 in October 1958, Pan Am wanted a jet 2+1⁄2 times its size, to reduce its seat cost by 30%. In 1965, Joe Sutter left the 737 development program to design the 747. In April 1966, Pan Am ordered 25 Boeing 747-100 aircraft, and in late 1966, Pratt & Whitney agreed to develop the JT9D engine, a high-bypass turbofan. On September 30, 1968, the first 747 was rolled out of the custom-built Everett Plant, the world's largest building by volume. The 747's first flight took place on February 9, 1969, and the 747 was certified in December of that year. It entered service with Pan Am on January 22, 1970. The 747 was the first airplane called a "Jumbo Jet" as the first wide-body airliner.
The Boeing 777, commonly referred to as the Triple Seven, is an American long-range wide-body airliner developed and manufactured by Boeing Commercial Airplanes. The 777 is the world's largest twinjet and the most-built wide-body airliner. The jetliner was designed to bridge the gap between Boeing's other wide body airplanes, the twin-engined 767 and quad-engined 747, and to replace aging DC-10 and L-1011 trijets. Developed in consultation with eight major airlines, the 777 program was launched in October 1990, with an order from United Airlines. The prototype aircraft rolled out in April 1994, and first flew in June of that year. The 777 entered service with the launch operator United Airlines in June 1995. Longer-range variants were launched in 2000, and first delivered in 2004.
The Airbus A330 is a wide-body aircraft developed and produced by Airbus. Airbus began developing larger A300 derivatives in the mid-1970s, giving rise to the A330 twinjet as well as the Airbus A340 quadjet, and launched both designs along with their first orders in June 1987. The A330-300, the first variant, took its maiden flight in November 1992 and entered service with Air Inter in January 1994. The slightly shorter A330-200 variant followed in 1998 with Canada 3000 as the launch operator.
A wide-body aircraft, also known as a twin-aisle aircraft and in the largest cases as a jumbo jet, is an airliner with a fuselage wide enough to accommodate two passenger aisles with seven or more seats abreast. The typical fuselage diameter is 5 to 6 m. In the typical wide-body economy cabin, passengers are seated seven to ten abreast, allowing a total capacity of 200 to 850 passengers. Seven-abreast aircraft typically seat 160 to 260 passengers, eight-abreast 250 to 380, nine- and ten-abreast 350 to 480. The largest wide-body aircraft are over 6 m (20 ft) wide, and can accommodate up to eleven passengers abreast in high-density configurations.
The Boeing 787 Dreamliner is an American wide-body airliner developed and manufactured by Boeing Commercial Airplanes. After dropping its unconventional Sonic Cruiser project, Boeing announced the conventional 7E7 on January 29, 2003, which focused largely on efficiency. The program was launched on April 26, 2004, with an order for 50 aircraft from All Nippon Airways (ANA), targeting a 2008 introduction. On July 8, 2007, a prototype 787 without major operating systems was rolled out; subsequently the aircraft experienced multiple delays, until its maiden flight on December 15, 2009. Type certification was received in August 2011, and the first 787-8 was delivered in September 2011 before entering commercial service on October 26, 2011, with ANA.
The Boeing 747-400 is a large, long-range wide-body airliner produced by Boeing Commercial Airplanes, an advanced variant of the initial Boeing 747. The "Advanced Series 300" was announced at the September 1984 Farnborough Airshow, targeting a 10% cost reduction with more efficient engines and 1,000 nautical miles [nmi] of additional range. Northwest Airlines became the first customer with an order for 10 aircraft on October 22, 1985. The first 747-400 was rolled out on January 26, 1988, and made its maiden flight on April 29, 1988. Type certification was received on January 9, 1989, and it entered service with Northwest on February 9, 1989.
The Extended-range Twin-engine Operations Performance Standards (ETOPS) are safety standards set by the International Civil Aviation Organization (ICAO) for twin-engine commercial passenger aircraft operations. They are a safety measure intended to ensure that in the event of a single engine failure, an aircraft will still be able to reach a diversion airport using the remaining operational engine. This may be at a reduced speed and/or height, and usually applies to flights over water or remote lands, typically routes previously restricted to three- and four-engine aircraft.
Boeing Commercial Airplanes (BCA) is a division of the Boeing Company. It designs, assembles, markets, and sells commercial aircraft, including the 737, 767, 777, and 787, along with freighter and business jet variants of most. The division employs nearly 35,000 people, many working at the company's division headquarters in Renton, Washington or at more than a dozen engineering, manufacturing, and assembly facilities, notably the Everett Factory and Renton Factory, and the South Carolina Factory.
The Boeing 747-8 is the final series of the large, long-range wide-body airliners in the Boeing 747 family from Boeing Commercial Airplanes. The 747-8 is the largest variant of the 747 and Boeing's largest aircraft. After introducing the 747-400, Boeing considered larger 747 versions as alternatives to the proposed double-deck Airbus A3XX, later developed as the Airbus A380. The stretched 747 Advanced was launched as the 747-8 on November 14, 2005, for a market forecast of 300 aircraft. The first 747-8F Freighter performed its maiden flight on February 8, 2010, and the passenger 747-8I Intercontinental followed suit on March 20, 2011. The cargo version was first delivered in October 2011 and the airliner began commercial service in June 2012.
The Boeing Dreamlifter, officially the 747-400 Large Cargo Freighter (LCF), is a wide-body cargo aircraft modified extensively from the Boeing 747-400 airliner. With a volume of 65,000 cubic feet (1,840 m3) it can hold three times that of a 747-400F freighter. The outsized aircraft was designed to transport Boeing 787 Dreamliner parts between Italy, Japan, and the U.S., but has also flown medical supplies during the COVID-19 pandemic.
The Boeing Everett Factory, officially the Everett Production Facility, is an airplane assembly facility operated by Boeing in Everett, Washington, United States. It sits on the north side of Paine Field and includes the largest building in the world by volume at over 472 million cubic feet (13,400,000 m3), which covers 98.3 acres (39.8 ha).
The Emirates fleet is composed of two wide-bodied aircraft families, the Airbus A380 and Boeing 777. The airline also has the Airbus A350-900, Boeing 777X and Boeing 787 aircraft on order.
As of 26 September 2024, the United Airlines fleet consists of 972 mainline aircraft, making it the second largest commercial airline fleet in the world. United Airlines operates a mix of Airbus and Boeing narrow-body and all Boeing wide-body aircraft.
The Boeing 777X is the latest series of the long-range, wide-body, twin-engine jetliners in the Boeing 777 family from Boeing Commercial Airplanes. The changes for 777X include GE9X engines, composite wings with folding wingtips, greater cabin width and seating capacity, and technologies from the Boeing 787. The 777X was launched in November 2013 with two variants: the 777-8 and the 777-9. The 777-8 provides seating for 395 passengers and has a range of 8,745 nmi while the 777-9 has seating for 426 passengers and a range of over 7,285 nmi.
First class is a travel class on some passenger airliners intended to be more luxurious than business class, premium economy, and economy class. Originally all planes offered only one class of service, with a second class appearing first in 1955 when TWA introduced two different types of service on its Super Constellations.
British Airways operates a fleet of Airbus and Boeing aircraft. It operates a single-aisle fleet of Airbus aircraft, including the Airbus A320-200 and the Airbus A320neo. It also operates a twin-aisle aircraft fleet of the Airbus A350-1000, Airbus A380, Boeing 777 and 787.
The ecoDemonstrator Program is a Boeing flight test research program, which has used a series of specially modified aircraft to develop and test aviation technologies designed to improve fuel economy and reduce the noise and ecological footprint of airliners.
N747GE is a Boeing 747 aircraft that was used by General Electric Aircraft Engines as a testbed for several of the companies jet engines between 1992 and 2017, including the GE90 for the Boeing 777, at the time, the world’s largest jet engine.