Manufacturer | BSA |
---|---|
Also called | Victor Roadster [1] |
Production | 1966–1970 |
Engine | 441cc (26.91 cubic inches) Four-stroke, single-cylinder, air-cooled, OHV, 2 valve per cylinder |
Power | 30 hp 21.9 KW @ 6500 rpm |
Transmission | 4 speed/chain |
Wheelbase | 52 inches (53 inches in 1969) [2] |
Dimensions | L: 82 inches (83.2 inches in 1969) [2] W: 28 inches (28.2 inches in 1969) [2] |
Fuel capacity | 3.96 gallons (15.00 litres) |
The BSA B44 Shooting Star was a motorcycle made by BSA at their factory in Small Heath, Birmingham. Similar to the BSA C15 and sharing many of the same parts, the B44 had an uprated chassis. [3] A weak point of the BSA 250 and most 350 unit singles were the big end bearing and timing side crank bush. The B44 had a double roller big end and a single lipped roller bearing supporting the drive side of the crank, with a ball bearing on the timing side. The timing side ball bearing was prone to failure, so one popular update was to replace it with an NUP305 removable flange roller bearing, thus strengthening the timing side and controlling the crankshaft end float. On the B50 single lip roller bearings were fitted on both sides of the crankshaft, with an outrigger ball bearing on the drive side to provide increased rigidity and end float control.
In 1965 an off-road motocross BSA B44 named the ‘’Victor’’ was launched at the Earls Court Show. Developed from scramblers used by Jeff Smith to win the 1964 and 1965 500cc World Championships, followed by the Victor Grand Prix and Victor Enduro models, as well as a road-going version, the 1967 Victor Roadster. The Victor Grand Prix Scrambler had a displacement of 441cc, and the Enduro model was known as the 441 Victor in the United States. BSA began offering a road version, the B44VR Victor Roadster, in 1967. When that model was exported to U.S. dealers in 1968, the name was changed to the B44SS Shooting Star. [1] The B44VS Victor Special was also successfully exported to the US between 1968 and 1970. [4]
In 1968 the B44 became BSA's top export model.[ citation needed ] The good availability of spare parts and the relative simplicity of the single-cylinder engine meant that the surviving examples are easily restored to as-new condition. [5]
On the original 1969 footage of the Woodstock Concert, producer Michael Lang is seen riding the off-road version, the BSA Victor Special, motorcycle across the pastures. [6]
The Victor Roadster (or Shooting Star, a name borrowed from a 1950s-era BSA twin), had a top speed of around 90 mph (140 km/h) (only a few mph faster than the 250 BSA Barracuda). The Victor Roadster of 1967 had a fibreglass tank and side covers, a 7-inch, half-width front brake, and the square-barrel Victor engine. In 1968, an 8-inch front brake was introduced, and from 1968, US versions came with higher handlebars and reflectors both beneath the tank and on either side of the tail light. In 1969 the Shooting Star was updated with a steel fuel tank and a twin-leading-shoe brake. [2]
Victors had impressive power-to-weight ratios that made them ideal for hill climbs. The 9.4:1 compression ratio required a compression release lever for kick starting.
The Norton Motorcycle Company is a brand of motorcycles headquartered in Solihull, West Midlands,, England. For some years around 1990, the rights to use the name on motorcycles was owned by North American financiers.
The BSA Bantam is a two-stroke unit construction motorcycle that was produced by the Birmingham Small Arms Company (BSA) from 1948 until 1971. Exact production figures are unknown, but it was over 250,000 and some estimates place the number closer to half a million.
The Yamaha XS650 is a mid-size motorcycle made by Yamaha Motor Company. The standard model was introduced in October 1969,and produced through 1979. The "Special" cruiser model was introduced in 1978 and produced through 1985. The XS650 began with the 1955 Hosk SOHC 500 twin. After about 10 years of producing 500 twin, Hosk engineers designed a 650 cc twin. Later the Hosk company was acquired by Showa Corporation, and in 1960 Yamaha had bought Showa with Hosk's early design of 650 cc twin.
The Triumph Bonneville is a standard motorcycle featuring a parallel-twin four-stroke engine and manufactured in three generations over three separate production runs.
The BSA Gold Star is a motorcycle made by BSA from 1938 to 1963. They were 350 cc and 500 cc single-cylinder four-stroke production motorcycles known for being among the fastest bikes of the 1950s. Being hand built and with many optional performance modifications available, each motorcycle came from the factory with documented dynamometer test results, allowing the new owner to see the horsepower (bhp) produced.
Norton-Villiers was a British motorcycle manufacturer formed in the 1960s following the collapse of AMC. With the general decline of the British motorcycle industry, under a British Government initiative it was later combined with the remnants of BSA Triumph to form Norton-Villiers-Triumph.
The Norton Commando is a British Norton-Villiers motorcycle with an OHV pre-unit parallel-twin engine, produced by the Norton Motorcycle company from 1967 until 1977. Initially having a nominal 750 cc displacement, actually 745 cc (45.5 cu in), in 1973 it became an 850 cc, actually 828 cc (50.5 cu in). It had a hemi-type head, similar to all OHV Norton engines since the early 1920s.
The Kawasaki W series is a line of vertical-twin standard motorcycles motorcycles made by Kawasaki beginning in 1965. First sold as a 1966 model in the North American market, the initial Kawasaki W1 had the largest engine displacement of any model manufactured in Japan at the time.
The Harley-Davidson VRSC, or V-Rod, is a line of V-twin cruiser motorcycles made by Harley-Davidson from 1999 until 2017. They are often called muscle bikes for their relatively high power output. The V-Rods are the first street motorcycles made by Harley-Davidson with overhead camshafts and liquid cooling.
The BSA Royal Star was a Birmingham Small Arms Company (BSA) motorcycle whose new engine design paved the way for a range of successful unit construction twins. As well as giving a clean look to the engine, with the pushrod passages part of the cylinder block casting, unit construction reduced the number of places oil could leak from.
The BSA C15 was a 250 cc single-cylinder ohv motorcycle manufactured by the British company BSA from September 1958 until 1967, and was BSA's first four-stroke unit-construction bike. For most of that period, after the introduction of 'Learner Laws' in 1961, a 250 cc was the largest capacity solo machine that a learner could ride unaccompanied when displaying L-plates in the United Kingdom. A road-going Sports derivative was added in 1961, and off-road versions, for Trials and Scrambles, were also available in the range.
Mead & Tomkinson was a motorcycle and car dealership in Hereford and Tewkesbury, Gloucester, England. Three of the Tomkinsons, sons Chris and Patrick, and their father, Mike, successfully built and fielded racing motorcycles. They concentrated on the Isle of Man TT and on 24-hour and 8-hour endurance races at Spa, Barcelona, Thruxton and the Le Mans Bol d'Or. One of their riders was Neil Tuxworth.
The BSA unit twins were a range of unit construction twin-cylinder motorcycles made by the Birmingham Small Arms Company (BSA) and aimed at the US market. A range of 500 cc (31 cu in), 650 cc (40 cu in) and 750 cc (46 cu in) twins were produced between 1962 and 1972, but they were really developments of the older pre-unit A7/A10 model range with less weight. The engines had a reputation for vibration, but acceleration was good for the time, to a top speed of 100 miles per hour (160 km/h).
The BSA A10 series was a range of 646 cc (39.4 cu in) air-cooled parallel twin motorcycles designed by Bert Hopwood and produced by Birmingham Small Arms Company at Small Heath, Birmingham from 1950 to 1963. The series was succeeded by the A65 unit construction models.
The BSA B25 was a series of 250 cc (15 cu in) unit construction single-cylinder OHV four-stroke motorcycles made by the Birmingham Small Arms Company. Developed from the BSA C15, the machines were produced between 1967 and 1971. The B25 was the fastest British production 250.
The BSA B40 was a series of 350 cc (21 cu in) unit construction single-cylinder OHV four-stroke motorcycles made by the Birmingham Small Arms Company. Developed from the BSA C15, the machines were produced between 1961 and 1967 for civilian use. Military versions were manufactured from 1967 to 1970. Around 14,000 machines were built in total.
The BSA B44 was a series of 441 cc (26.9 cu in) unit construction single-cylinder OHV four-stroke motorcycles made by the Birmingham Small Arms Company between 1966 and 1970. The machines were developed from the BSA World Championship Motocross machines, which were themselves based on the C15/B40.
The Norton Model 7 Dominator was a 500 cc vertical twin motorcycle manufactured by the Norton Motorcycle Company from 1949 to 1955. It was the first of Norton's Dominator range of motorcycles. The engine was designed by Bert Hopwood and was a departure from Norton's previous practice of producing single-cylinder machines. The Model 7 was used in Japan as a police motorcycle.
The Ducati 450 Scrambler, also known in the US as the Ducati Jupiter and in Europe as the Ducati 450 SCR is an on/off-road 436 cc (26.6 cu in) single cylinder bevel drive SOHC motorcycle produced by the Italian manufacturer Ducati from 1969 to 1974. Total production was around 11,000 machines.
The Laverda 1000 is a series of 981 cc (59.9 cu in) air cooled DOHC triple motorcycles produced by the Italian manufacturer Laverda between 1973 and 1988. The high-performance variant, the Jota, was the fastest production motorcycle from 1976 to 1981. Approximately 7,100 triples of the various models were produced.