Names | |
---|---|
Preferred IUPAC name 3,9-bis(2,4-di-tert-butylphenoxy)-2,4,8,10-tetraoxa-3,9-diphosphaspiro[5.5]undecane | |
Other names Trade names
| |
Identifiers | |
3D model (JSmol) | |
ChemSpider | |
ECHA InfoCard | 100.043.578 |
EC Number |
|
PubChem CID | |
UNII | |
CompTox Dashboard (EPA) | |
| |
| |
Properties | |
C33H50O6P2 | |
Molar mass | 604.705 g·mol−1 |
Appearance | White solid |
Density | 1.166 at 20°C |
Melting point | 172–179 °C (342–354 °F; 445–452 K) |
Boiling point | 311 °C (592 °F; 584 K) |
93.0 µg/L at 25°C | |
Hazards | |
GHS labelling: | |
Warning | |
H410 | |
P261, P264, P264+P265, P271, P273, P280, P302+P352, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P391, P403+P233, P405, P501 | |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). |
Bis(2,4-di-tert-butylphenyl) pentaerythritol diphosphite is an organophosphite used as a polymer stabilizer in plastics. Like other phosphite antioxidants it primarily acts to remove hydroperoxides and is typically used in combination with hindered phenolic antioxidants such as pentaerythritol tetrakis(3,5-di-tert-butyl-4-hydroxyhydrocinnamate).
It is formed by a reaction between phosphorous trichloride, pentaerythritol and 2,4-di-tert-butylphenol. The poor solubility of pentererythritol can be an issue and non-nuncleophilic amines are often used to promote the reaction. [1]
Compared to tris(2,4-di-tert-butylphenyl)phosphite (a common phosphite antioxidant) it has higher activity but lower stability against hydrolysis. Trace levels of amine bases are often added to commercial material to slow hydrolysis and increase storage life. [2] It's crystal structure has been determined. [3] It is comparable with a wide range of plastics including polyolefins, engineering plastics and polyurethane fibers. It is an approved food contact material in the US. [4]
Antioxidants are compounds that inhibit oxidation, a chemical reaction that can produce free radicals. Autoxidation leads to degradation of organic compounds, including living matter. Antioxidants are frequently added to industrial products, such as polymers, fuels, and lubricants, to extend their usable lifetimes. Foods are also treated with antioxidants to forestall spoilage, in particular the rancidification of oils and fats. In cells, antioxidants such as glutathione, mycothiol, or bacillithiol, and enzyme systems like superoxide dismutase, can prevent damage from oxidative stress.
In chemistry, an ester is a compound derived from an acid in which the hydrogen atom (H) of at least one acidic hydroxyl group of that acid is replaced by an organyl group. These compounds contain a distinctive functional group. Analogues derived from oxygen replaced by other chalcogens belong to the ester category as well. According to some authors, organyl derivatives of acidic hydrogen of other acids are esters as well, but not according to the IUPAC.
Butylated hydroxytoluene (BHT), also known as dibutylhydroxytoluene, is a lipophilic organic compound, chemically a derivative of phenol, that is useful for its antioxidant properties. BHT is widely used to prevent free radical-mediated oxidation in fluids and other materials, and the regulations overseen by the U.S. F.D.A.—which considers BHT to be "generally recognized as safe"—allow small amounts to be added to foods. Despite this, and the earlier determination by the National Cancer Institute that BHT was noncarcinogenic in an animal model, societal concerns over its broad use have been expressed. BHT has also been postulated as an antiviral drug, but as of December 2022, use of BHT as a drug is not supported by the scientific literature and it has not been approved by any drug regulatory agency for use as an antiviral.
Polymer degradation is the reduction in the physical properties of a polymer, such as strength, caused by changes in its chemical composition. Polymers and particularly plastics are subject to degradation at all stages of their product life cycle, including during their initial processing, use, disposal into the environment and recycling. The rate of this degradation varies significantly; biodegradation can take decades, whereas some industrial processes can completely decompose a polymer in hours.
Steric effects arise from the spatial arrangement of atoms. When atoms come close together there is generally a rise in the energy of the molecule. Steric effects are nonbonding interactions that influence the shape (conformation) and reactivity of ions and molecules. Steric effects complement electronic effects, which dictate the shape and reactivity of molecules. Steric repulsive forces between overlapping electron clouds result in structured groupings of molecules stabilized by the way that opposites attract and like charges repel.
In industrial chemistry, a stabilizer or stabiliser is a chemical that is used to prevent degradation. Above all, heat and light stabilizers are added to plastic and rubber materials because they ensure safe processing and protect products against aging and weathering. In particular polyvinyl chloride would not be possible without stabilizers.
Di-tert-butyl dicarbonate is a reagent widely used in organic synthesis. Since this compound can be regarded formally as the acid anhydride derived from a tert-butoxycarbonyl (Boc) group, it is commonly referred to as Boc anhydride. This pyrocarbonate reacts with amines to give N-tert-butoxycarbonyl or so-called Boc derivatives. These carbamate derivatives do not behave as amines, which allows certain subsequent transformations to occur that would be incompatible with the amine functional group. The Boc group can later be removed from the amine using moderately strong acids. Thus, Boc serves as a protective group, for instance in solid phase peptide synthesis. Boc-protected amines are unreactive to most bases and nucleophiles, allowing for the use of the fluorenylmethyloxycarbonyl group (Fmoc) as an orthogonal protecting group.
2,6-Di-tert-butylphenol is an organic compound with the structural formula 2,6-((CH3)3C)2C6H3OH. This colorless solid alkylated phenol and its derivatives are used industrially as UV stabilizers and antioxidants for hydrocarbon-based products ranging from petrochemicals to plastics. Illustrative of its usefulness, it prevents gumming in aviation fuels.
tert-Butylhydroquinone is a synthetic aromatic organic compound which is a type of phenol. It is a derivative of hydroquinone, substituted with a tert-butyl group.
Polymer stabilizers are chemical additives which may be added to polymeric materials to inhibit or retard their degradation. Mainly they protect plastic and rubber products against heat, oxidation, and UV light. The biggest quantity of stabilizers is used for polyvinyl chloride (PVC), as the production and processing of this type of plastic would not be possible without stabilizing chemicals. Common polymer degradation processes include oxidation, UV-damage, thermal degradation, ozonolysis, combinations thereof such as photo-oxidation, as well as reactions with catalyst residues, dyes, or impurities. All of these degrade the polymer at a chemical level, via chain scission, uncontrolled recombination and cross-linking, which adversely affects many key properties such as strength, malleability, appearance and colour.
Irganox 1098 is the trade name for N,N′-(hexane-1,6-diyl)bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propanamide], a primary antioxidant manufactured by BASF primarily used for stabilizing polymers, especially polyamides. It is noted for its thermal stability as well as its non-discoloring properties.
tert-Butyl peroxybenzoate (TBPB) an organic compound with the formula C6H5CO3CMe3 (Me = CH3). It is the most widely produced perester; it is an ester of peroxybenzoic acid (C6H5CO3H). It is often used as a radical initiator in polymerization reactions, such as the production of LDPE from ethylene, and for crosslinking, such as for unsaturated polyester resins.
2,4,6-Tri-tert-butylphenol (2,4,6-TTBP) is a phenol symmetrically substituted with three tert-butyl groups and thus strongly sterically hindered. 2,4,6-TTBP is a readily oxidizable aromatic compound and a weak acid. It oxidizes to give the deep-blue 2,4,6-tri-tert-butylphenoxy radical. 2,4,6-TTBP is related to 2,6-di-tert-butylphenol, which is widely used as an antioxidant in industrial applications. These compounds are colorless solids.
Tris(2,4-di-tert-butylphenyl)phosphite is an organophosphorus compound with the formula [(C4H9)2C6H3O]3P. This white solid is a widely used stabilizer in polymers where it functions as a secondary antioxidant. It also reduces discoloration (yellowing) of plastics. The compound is a phosphite ester formed by the reaction of 2,4-di-tert-butylphenol with phosphorous trichloride. It is an approved food contact materials in the US.
Pentaerythritol tetrakis(3,5-di-tert-butyl-4-hydroxyhydrocinnamate) is a chemical compound composed of four sterically hindered phenols linked through a pentaerythritol core. It is used as primary antioxidant for stabilizing polymers, particularly polyethylene and polypropylene.
2,2′-Biphenol is an organic compound with the formula (C6H4OH)2. It is one of three symmetrical isomers of biphenol. A white solid, it is a precursor to diphosphite ligands that are used to support industrial hydroformylation catalysis.
Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate is a hindered phenolic antioxidant commonly used as a polymer stabiliser.
2,4-Di-tert-butylphenol (2,4-DTBP) is a white solid with a phenolic odour. It is primarily used as a raw material for the production of several commercially important antioxidants and phenolic benzotriazole-type UV absorbers. It also finds use as a starting material in the synthesis of agrochemicals, fragrances and catalysts.
1,3,5-Tris(4- -3-hydroxy-2,6-dimethylbenzyl)-1,3,5-triazinane-2,4,6-trione is a speciality antioxidant used to stabilise plastics and synthetic fibres.
Tris(3,5-di-tert-butyl-4-hydroxybenzyl) isocyanurate is a chemical compound used as a polymer stabilizer in plastics. Like other hindered phenols it acts as a primary antioxidant. More than 1000 tonnes per year are used in the EU.