The Cantata 700 is a commercial background music system and corresponding cartridge format developed by 3M that was in common use from 1965 until the 1990s. [1]
 | |
| Media type | Magnetic tape cassette |
|---|---|
| Encoding | Analog signal, in four mono tracks @ 1+7⁄8 in (48 mm) IPS |
| Capacity | 26 hours |
| Read mechanism | Tape head |
| Write mechanism | Prerecorded only |
| Developed by | 3M |
| Usage | Audio storage for background music |
| Released | 1965 |
| Discontinued | 1988 |
The nearly square-shaped cartridges are among the largest built. More than 24 hours of playback fits on a cartridge. The music distributed by 3M consisted of mono recordings some of which are attributed to the company's "3M Orchestra", with later editions featuring a themed blend of library music tracks and mostly instrumental cover versions of standard songs, and classical pieces arranged in a light or bright tempo. Cartridges such as the Italian and Polynesian editions include some vocal content. The tape is 1⁄4 in (6.4 mm) wide and is played at 1+7⁄8 in (48 mm) per second. [2] The cartridge consists of a reel-to-reel mechanism intended for playback only. Internally, the cartridge contains two 8+3⁄8 in (210 mm) tape reels, tape guides, rollers, and a reel brake. The reels are stacked on top of each other vertically and counter rotate during operation. After passing over the tape head, the tape loops over a roller in the cartridge to change its direction back to the takeup reel. [1]
There were three main designs of cartridges manufactured, with a fourth minor modification. The earlier tapes (1965-mid 70s) use metal reels and the later tapes use plastic reels (mid 70s-1988). Muzak acquired the remaining unsold stock in 1986. Tapes manufactured before 1986 use scotch recording tape inside. Tapes sold by Muzak use a different formulation of tape more similar to type 1 cassette tape. Muzak tapes use 3M shells with Muzak labels over the top of the 3M labeling. The last tapes were sold in 1988. All information on the Cantata 700 was divested by 3M in 1988. [3]
All offered machines are playback only. The first models 94BG and 94BZ, were offered in 1965 and bundled with two cartridges of the customer's choice for US$429.00; equivalent to $3,984in 2022. [2] Each machine is equipped with a jack for 8 Ω speakers at a maximum of 6 W and a microphone jack for public address announcements. [2] [1]
The machines played continuously using an auto-reverse mechanism. As the tape reaches one end, the reverse mechanism activates and changes the drive direction. The tape head moves to the other side and the mechanism shifts pinch rollers. The design does not require the head to turn over; instead, the entire head changes position to play the tape at the other side of the tape path. [1]
In 1970, 3M introduced the Cantata 700 Mark II, available only by lease. [4]
The 8-track tape is a magnetic-tape sound recording technology that was popular from the mid-1960s to the early 1980s, when the compact cassette, which pre-dated the 8-track system, surpassed it in popularity for pre-recorded music.
A cassette deck is a type of tape machine for playing and recording audio cassettes that does not have a built-in power amplifier or speakers, and serves primarily as a transport. It can be a part of an automotive entertainment system, a part of a portable mini system or a part of a home component system. In the latter case it is also called a component cassette deck or just a component deck.
Elcaset was a short-lived audio format jointly developed by Sony, Panasonic, and Teac in 1976, building on an idea introduced 20 years earlier in the RCA tape cartridge.
Reel-to-reel audio tape recording, also called open-reel recording, is magnetic tape audio recording in which the recording tape is spooled between reels. To prepare for use, the supply reel containing the tape is placed on a spindle or hub. The end of the tape is manually pulled from the reel, threaded through mechanical guides and over a tape head assembly, and attached by friction to the hub of the second, initially empty takeup reel. Reel-to-reel systems use tape that is 1⁄4, 1⁄2, 1, or 2 inches wide, which normally moves at 3+3⁄4, 7+1⁄2, 15 or 30 inches per second. Domestic consumer machines almost always used 1⁄4 inch (6.35 mm) or narrower tape and many offered slower speeds such as 1+7⁄8 inches per second (4.762 cm/s). All standard tape speeds are derived as a binary submultiple of 30 inches per second.
A video tape recorder (VTR) is a tape recorder designed to record and playback video and audio material from magnetic tape. The early VTRs were open-reel devices that record on individual reels of 2-inch-wide (5.08 cm) tape. They were used in television studios, serving as a replacement for motion picture film stock and making recording for television applications cheaper and quicker. Beginning in 1963, videotape machines made instant replay during televised sporting events possible. Improved formats, in which the tape was contained inside a videocassette, were introduced around 1969; the machines which play them are called videocassette recorders.
VHS-C is the compact VHS videocassette format, introduced by Victor Company of Japan (JVC) in 1982, and used primarily for consumer-grade compact analog recording camcorders. The format is based on the same video tape as is used in VHS, and can be played back in a standard VHS VCR with an adapter. Though quite inexpensive, the format is largely obsolete even as a consumer standard and has been replaced in the marketplace by digital video formats, which have smaller form factors.
PlayTape is a 1⁄8 inch (3.2 mm) audiotape format and mono or stereo playback system introduced in 1966 by Frank Stanton. It is a two-track system, and was launched to compete with existing 4-track cartridge technology. The cartridges play anywhere from eight to 24 minutes, and are continuous. Because of its portability, PlayTape was an almost instant success, and over 3,000 artists had published in this format by 1968. White cases usually meant about eight songs were on the tape.
Since the widespread adoption of reel-to-reel audio tape recording in the 1950s, audio tapes and tape cassettes have been available in many formats. This article describes the length, tape thickness and playing times of some of the most common ones.
A loop bin duplicator is a specialized audio tape machine used in the duplication of pre-recorded audio cassettes and 8-track cartridges.
The RCA tape cartridge is a magnetic tape audio format that was designed to offer stereo quarter-inch reel-to-reel tape recording quality in a convenient format for the consumer market. It was introduced in 1958, following four years of development. This timing coincided with the launch of the stereophonic phonograph record. It was introduced to the market by RCA in 1958.
EIAJ-1 was a standard for video tape recorders (VTRs) developed by the Electronic Industries Association of Japan with the cooperation and assistance of several Japanese electronics manufacturers in 1969. It was the first standardized format for industrial/non-broadcast VTRs using a helical scan system employing open reel tape. Previously, each manufacturer of machines in this market used a different proprietary format, with differing tape speeds, scanner drum diameters, bias frequencies, tracking head placement, and so on, although most used 1/2" wide tape. As a result, video tapes recorded on one make and/or model of VTR could only be interchanged with other machines using that specific format, hampering compatibility. For example, a reel of tape recorded on a Panasonic machine would not play on a Sony machine, and vice versa. The EIAJ-1 standard ended this incompatibility, giving those manufacturers a standardized format, interchangeable with almost all VTRs subsequently brought to market around that time. The format offered black-and-white video recording and playback on 1/2″ magnetic tape on a 7″ diameter open reel, with portable units using smaller 5″ diameter reels.
A tape transport is the collection of parts of a magnetic tape player or recorder that move the tape and play or record it. Transport parts include the head, capstan, pinch roller, tape pins, and tape guide. The tape transport as a whole is called the transport mechanism.
The Tefifon is an audio playback format, developed and manufactured in Germany, that utilizes cartridges loaded with an endlessly looped reel of plastic tape. It is somewhat similar to the later 4-track and 8-track magnetic audio tape cartridges, but with grooves embossed on the tape, like a phonograph record. The grooves were embossed in a helical fashion across the width of the tape, in a manner similar to Dictaphone's Dictabelt format. The grooves are read with a stylus and amplified pickup in the player's transport. A Tefifon cartridge, known as a "Tefi", can hold up to four hours of music; therefore, most releases for the format are usually compilations of popular hits or dance music, operas, and operettas. Tefifon players were not sold by television and radio dealers in Germany, but rather sold directly by special sales outlets affiliated with Tefi.
Matthew "Mat" Taylor, better known by his channel's name Techmoan, is a YouTuber and blogger active since May 2009, featuring consumer tech reviews and retrotech documentaries about technology of historical interest.
Sabamobil was a magnetic tape audio cartridge format made by SABA that came to the market in 1964. It used already-available four-track ¼ inch tape on 3-inch reels (7.62 cm), with two mono channels per side, using a tape speed of 3¾ ips (9.5 cm/s), and was compatible with reel-to-reel audio tape recording except the against remove secured ends of the tape in the reel. The cartridge could be opened without the need of any tools by removing two holding clamps. Tape head and capstan were placed between the reels.
Rowe Customusic is a background music system from the 1960s and 1970s. Up to six Fidelipac type C endless-loop magnetic tape cartridges can be loaded in the player, allowing up to 60 hours of playback. The case is 13⅝" wide, 11⅛" high and 13¾" deep. Like the 3M Cantata 700, the player moves the tape head between cartridges and, as in other Fidelipac players, between the four tracks on a cartridge. The current cartridge number is indicated on a seven-segment display. Automatic track advancement was triggered by a conductive tape strip on the splice of the tape loop, or manually by pressing a button. Another switch located next to the power switch disables cartridge changeover, replaying only the current cartridge.
The Sanyo Micro Pack 35 was a portable magnetic audio tape recording device, developed by Sanyo in 1964, that employed a special tape cartridge format with tape reels atop each other.
The single-hole cassette,, was a concept of a high fidelity suitable magnetic tape cartridge or cassette from Philips for analog recordings. Tape and tape speed were identical to the Compact Cassette. It was never released to the public.
DC-International is a tape cassette format developed by Grundig and marketed in 1965. DC is the abbreviation of "Double Cassette", as the cassette contained two reels; International was intended to indicate that, from the beginning, several companies around the world supported the format with suitable tape cassette tape recorders, recorded music cassettes and blank cassettes. Since DC-International did not compete effectively against the similar Compact Cassette, it was discontinued in 1967.