DBNPA

Last updated
DBNPA
2,2-Dibromo-2-cyanacetamide Structural Formula V1.svg
Ball and stick model of DBNPA DBNPA-3D-balls.png
Ball and stick model of DBNPA
Spacefill model of DBNPA DBNPA-3D-spacefill.png
Spacefill model of DBNPA
Names
Preferred IUPAC name
2,2-Dibromo-2-cyanoacetamide [1]
Other names
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.030.477 OOjs UI icon edit-ltr-progressive.svg
EC Number
  • 233-539-7
MeSH 2,2-dibromo-3-nitrilopropionamide
PubChem CID
RTECS number
  • AB5956000
UNII
UN number 1759
  • InChI=1S/C3H2Br2N2O/c4-3(5,1-6)2(7)8/h(H2,7,8) Yes check.svgY
    Key: UUIVKBHZENILKB-UHFFFAOYSA-N Yes check.svgY
  • NC(=O)C(Br)(Br)C#N
Properties
C3H2Br2N2O
Molar mass 241.870 g·mol−1
AppearanceWhite, translucent crystals
Melting point 122 to 125 °C (252 to 257 °F; 395 to 398 K)
Hazards
GHS pictograms GHS-pictogram-acid.svg GHS-pictogram-exclam.svg GHS-pictogram-pollu.svg
GHS Signal word Danger
H314, H317, H400
P273, P280, P305+351+338, P310
Lethal dose or concentration (LD, LC):
10 mg kg−1(intravenous, mouse)
Related compounds
Related compounds
Cyanoacetamide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

DBNPA or 2,2-dibromo-3-nitrilopropionamide is a quick-kill biocide that easily hydrolyzes under both acidic and alkaline conditions. It is preferred for its instability in water as it quickly kills and then quickly degrades to form a number of products, depending on the conditions, including ammonia, bromide ions, dibromoacetonitrile, and dibromoacetic acid. [2] DBNPA acts similar to the typical halogen biocides.

DBNPA is used in a wide variety of applications. Some examples are in papermaking as a preservative in paper coating and slurries. It is also used as slime control on papermachines, and as a biocide in hydraulic fracturing wells and in cooling water. [2]

Related Research Articles

Borax Boron compound, a salt of boric acid

Borax, also known as sodium borate, sodium tetraborate, or disodium tetraborate, is an important boron compound, a mineral, and a salt of boric acid. Powdered borax is white, consisting of soft colorless crystals that dissolve in water. A number of closely related minerals or chemical compounds that differ in their crystal water content are referred to as borax, and the word is usually used to refer to the octahydrate. Commercially sold borax is partially dehydrated.

Summitville mine

The Summitville mine was a gold mining site in the United States, located in Rio Grande County, Colorado 25 miles (40 km) south of Del Norte. It is remembered for the environmental damage caused in the 1980s by the leakage of mining by-products into local waterways and then the Alamosa River.

Chemical waste

Chemical waste is a waste that is made from harmful chemicals. Chemical waste may fall under regulations such as COSHH in the United Kingdom, or the Clean Water Act and Resource Conservation and Recovery Act in the United States. In the U.S., the Environmental Protection Agency (EPA) and the Occupational Safety and Health Administration (OSHA), as well as state and local regulations also regulate chemical use and disposal. Chemical waste may or may not be classed as hazardous waste. A chemical hazardous waste is a solid, liquid, or gaseous material that displays either a “Hazardous Characteristic” or is specifically “listed” by name as a hazardous waste. There are four characteristics chemical wastes may have to be considered as hazardous. These are Ignitability, Corrosivity, Reactivity, and Toxicity. This type of hazardous waste must be categorized as to its identity, constituents, and hazards so that it may be safely handled and managed. Chemical waste is a broad term and encompasses many types of materials. Consult the Material Safety Data Sheet (MSDS), Product Data Sheet or Label for a list of constituents. These sources should state whether this chemical waste is a waste that needs special disposal.

A biocide is defined in the European legislation as a chemical substance or microorganism intended to destroy, deter, render harmless, or exert a controlling effect on any harmful organism. The US Environmental Protection Agency (EPA) uses a slightly different definition for biocides as "a diverse group of poisonous substances including preservatives, insecticides, disinfectants, and pesticides used for the control of organisms that are harmful to human or animal health or that cause damage to natural or manufactured products". When compared, the two definitions roughly imply the same, although the US EPA definition includes plant protection products and some veterinary medicines.

Chlorine dioxide Chemical compound

Chlorine dioxide is a chemical compound with the formula ClO2 that exists as yellowish-green gas above 11 °C, a reddish-brown liquid between 11 °C and −59 °C, and as bright orange crystals below −59 °C. It is an oxidizing agent, able to transfer oxygen to a variety of substrates, while gaining one or more electrons via oxidation-reduction (redox). It does not hydrolyze when it enters water, and is usually handled as a dissolved gas in solution in water. Potential hazards with chlorine dioxide include health concerns, explosiveness and fire ignition. It is commonly used as a bleach.

Disinfectant Antimicrobial agents that inactivate or destroy microorganisms

Disinfectants are chemical agents designed to inactivate or destroy microorganisms on inert surfaces. Disinfection does not necessarily kill all microorganisms, especially resistant bacterial spores; it is less effective than sterilization, which is an extreme physical or chemical process that kills all types of life. Disinfectants are generally distinguished from other antimicrobial agents such as antibiotics, which destroy microorganisms within the body, and antiseptics, which destroy microorganisms on living tissue. Disinfectants are also different from biocides—the latter are intended to destroy all forms of life, not just microorganisms. Disinfectants work by destroying the cell wall of microbes or interfering with their metabolism. It is also a form of decontamination, and can be defined as the process whereby physical or chemical methods are used to reduce the amount of pathogenic microorganisms on a surface.

An antimicrobial is an agent that kills microorganisms or stops their growth. Antimicrobial medicines can be grouped according to the microorganisms they act primarily against. For example, antibiotics are used against bacteria, and antifungals are used against fungi. They can also be classified according to their function. Agents that kill microbes are microbicides, while those that merely inhibit their growth are called bacteriostatic agents. The use of antimicrobial medicines to treat infection is known as antimicrobial chemotherapy, while the use of antimicrobial medicines to prevent infection is known as antimicrobial prophylaxis.

Acrolein Chemical compound

Acrolein is the simplest unsaturated aldehyde. It is a colorless liquid with a piercing, acrid smell. The smell of burnt fat is caused by glycerol in the burning fat breaking down into acrolein. It is produced industrially from propylene and mainly used as a biocide and a building block to other chemical compounds, such as the amino acid methionine.

Sodium chlorite Chemical compound

Sodium chlorite (NaClO2) is a chemical compound used in the manufacturing of paper and as a disinfectant.

Diisobutylaluminium hydride Chemical compound

Diisobutylaluminium hydride (DIBALH, DIBAL, DIBAL-H or DIBAH, DY-bal) is a reducing agent with the formula (i-Bu2AlH)2, where i-Bu represents isobutyl (-CH2CH(CH3)2). This organoaluminium compound was investigated originally as a co-catalyst for the polymerization of alkenes.

Tributyltin

Tributyltin (TBT) is an umbrella term for a class of organotin compounds which contain the (C4H9)3Sn group, with a prominent example being tributyltin oxide. For 40 years TBT was used as a biocide in anti-fouling paint, commonly known as bottom paint, applied to the hulls of ocean going vessels. Bottom paint improves ship performance and durability as it reduces the rate of biofouling (the growth of organisms on the ship's hull). The TBT slowly leaches out into the marine environment where it is highly toxic toward nontarget organisms. TBT is also an obesogen. After it led to collapse of local populations of organisms, TBT was banned.

Epichlorohydrin Chemical compound

Epichlorohydrin is an organochlorine compound and an epoxide. Despite its name, it is not a halohydrin. It is a colorless liquid with a pungent, garlic-like odor, moderately soluble in water, but miscible with most polar organic solvents. It is a chiral molecule generally existing as a racemic mixture of right-handed and left-handed enantiomers. Epichlorohydrin is a highly reactive electrophilic compound and is used in the production of glycerol, plastics, epoxy glues and resins, epoxy diluents and elastomers.

1-Bromopropane Chemical compound

1-Bromopropane (n-propylbromide or nPB) is an organobromine compound with the chemical formula CH3CH2CH2Br. It is a colorless liquid that is used as a solvent. It has a characteristic hydrocarbon odor. Its industrial applications increased dramatically in the 21st century.

Bromoxynil Chemical compound

Bromoxynil is an organic compound with the formula HOBr2C6H2CN. It is classified as a nitrile herbicide, and as such sold under many trade names. It is a white solid. It works by inhibiting photosynthesis. It is moderately toxic to mammals.

Organobromine compounds, also called organobromides, are organic compounds that contain carbon bonded to bromine. The most pervasive is the naturally produced bromomethane.

Naled Organophosphate insecticide

Naled (Dibrom) is an organophosphate insecticide. Its chemical name is dimethyl 1,2-dibromo-2,2-dichloroethylphosphate.

Hydraulic fracturing proppants

A proppant is a solid material, typically sand, treated sand or man-made ceramic materials, designed to keep an induced hydraulic fracture open, during or following a fracturing treatment. It is added to a fracking fluid which may vary in composition depending on the type of fracturing used, and can be gel, foam or slickwater–based. In addition, there may be unconventional fracking fluids. Fluids make tradeoffs in such material properties as viscosity, where more viscous fluids can carry more concentrated proppant; the energy or pressure demands to maintain a certain flux pump rate that will conduct the proppant appropriately; pH, various rheological factors, among others. In addition, fluids may be used in low-volume well stimulation of high-permeability sandstone wells to the high-volume operations such as shale gas and tight gas that use millions of gallons of water per well.

Endothall Chemical compound

Endothall is used as an herbicide for both terrestrial and aquatic plants. It is used as an aquatic herbicide for submerged aquatic plants and algae in lakes, ponds and irrigation canals. It is used as a desiccant on potatoes, hops, cotton, clover and alfalfa. It is used as a biocide to control mollusks and algae in cooling towers.

Water chlorination Chorination of water

Water chlorination is the process of adding chlorine or chlorine compounds such as sodium hypochlorite to water. This method is used to kill bacteria, viruses and other microbes in water. In particular, chlorination is used to prevent the spread of waterborne diseases such as cholera, dysentery, and typhoid.

Water contamination in Lawrence and Morgan Counties, Alabama

Water contamination in Lawrence and Morgan Counties, Alabama, revolves around the presence of perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) in the water supply. After the US Environmental Protection Agency (EPA) released new health advisories in March 2016, there was concern over health risks of the levels of PFOA and PFOS present. The responses of different government officials, agencies, and companies raise questions as to whether or not there was any environmental injustice involved.

References

  1. "2,2-dibromo-3-nitrilopropionamide - Compound Summary". PubChem Compound. USA: National Center for Biotechnology Information. 26 March 2005. Identification. Retrieved 9 June 2012.CS1 maint: discouraged parameter (link)
  2. 1 2 "Reregistration Eligibility Decision (RED) 2,2-dibromo-3-nitrilopropionamide (DBNPA)" (PDF). "EPA 738-R-94-026". US EPA. September 1994. p. 179. Archived from the original (PDF) on 2014-10-16. Retrieved 2012-06-14.CS1 maint: discouraged parameter (link)