David Gunness

Last updated
David Gunness
Gunness 1.jpg
Self-portrait photograph
Born (1960-11-07) November 7, 1960 (age 64)
Occupation(s) Audio engineer, electrical engineer and inventor
Employer(s) Electro-Voice
Eastern Acoustic Works
Fulcrum Acoustic
Website http://www.fulcrum-acoustic.com

David W. Gunness (born November 7, 1960) is an American audio engineer, electrical engineer and inventor. He is known for his work on loudspeaker design, especially high-output professional horn loudspeakers for public address, studio, theater, nightclub, concert and touring uses.

Contents

Gunness worked with Electro-Voice in Michigan for 11 years, filing three patents related to horn technology. He worked at Eastern Acoustic Works (EAW) in Massachusetts for 12 years, filing three patents in the process of creating a wide variety of loudspeaker products. For EAW, Gunness developed "Gunness Focusing"—a system for decreasing temporal response distortion in loudspeakers, involving the processing of the audio signal before it reaches the loudspeaker drivers, applying a reverse image of the expected distortion to cancel out the loudspeaker's idiosyncrasies. Gunness co-founded Fulcrum Acoustic in 2008: a loudspeaker company with the aim of designing loudspeakers based on digital signal processing (DSP), innovative components and high quality construction.

Early life

Gunness was born November 7, 1960; he grew up in Janesville, Wisconsin, enjoying outdoor activities such as bicycling, camping, hunting and fishing. At Joseph A. Craig High School he participated in gymnastics and played guitar. [1] Two of his sisters entered the University of Wisconsin–Madison (UW-Madison), but Gunness chose Purdue University in Indiana. After one year there, he returned to Wisconsin to enroll at UW-Madison as an electrical engineering major. During his college years he made extra money as a musician; singing and playing acoustic guitar. [2] For these gigs he fabricated his own loudspeakers, and he determined to continue in this field, shifting his studies to focus on acoustics and electronics. In June 1984, Gunness graduated UW-Madison with a degree in Electrical and Computer Engineering. He immediately accepted an engineering job in Buchanan, Michigan, and relocated there. On September 29, 1984, he married Kathryn A. Sessions, a nursing student who had finished one year ahead of him at UW-Madison. [1]

Electro-Voice

Gunness's first patent, a manifold of cast zinc combining four compression drivers into one horn Gunness 4-way compression driver manifold, 1984.jpg
Gunness's first patent, a manifold of cast zinc combining four compression drivers into one horn

Directly after graduating UW-Madison, Gunness obtained a research and development position in the engineering department at the Electro-Voice (EV) factory in Michigan. Under Chief Engineer Ray Newman, Gunness worked on loudspeaker design, combining traditional empirical R&D methodologies with the emerging capabilities of computer analysis. [1] His first assignment was to help develop the Musicaster 100, an all-weather 2-way coaxial loudspeaker; an update of the classic 1959 Musicaster design. [3]

In 1984, Gunness filed a patent for a better way to use a manifold to combine the outputs of multiple compression drivers for increased sound power level (SPL), using two to four flat reflecting surfaces in the throat of a horn to redirect sound waves for a more coherent summation. [4] This low-distortion manifold design made it possible for EV to produce its first high-power concert and touring loudspeaker: the MT-4, with "MT" standing for "Manifold Technology". This was a 4-way system split between two enclosures, with four speaker drivers summed in each bandpass; a total of 16 drivers. The upper two bandpasses used the Gunness manifold design for compression drivers, each manifold formed of two zinc castings. The medium low frequencies were carried by four 10-inch (250 mm) cone drivers summed using a larger embodiment of the Gunness manifold concept based on ray tracing and reflection. [5] The MT-4 was a very heavy system at 633 pounds (287 kg), [6] but it put more power into a smaller package, and it was quicker to position and connect. [7] The MT-4 proved popular, used on major tours and festivals such as the 1995 Monsters of Rock at Donington Park in central England [8] and the main stage of the 1996 Lollapalooza tour featuring Metallica and Soundgarden. [9] Together, EV engineer David Carlson and Gunness presented a paper to the Audio Engineering Society (AES) in November 1986, describing the methods they used to sum four drivers in each bandpass. [5]

In 1986, Gunness developed the EV HP series of horn loudspeakers based on the constant directivity (CD) characteristics described by EV engineer Don Keele in the mid-1970s. Gunness recognized that relatively large 2-inch (51 mm) horn throats, commonly used for greater SPL, produced an undesirable narrowing of the output pattern above 10 kHz. His patented design used two longitudinal ribs or vanes to form three "pseudo horns" within the horn flare. [10]

In 1989, Gunness developed an asymmetric horn with an output pattern shaped to suit a typical small-to-mid-sized rectangular auditorium with people sitting near the enclosure hearing sound that was not too loud and others sitting farther away hearing sound that was loud enough. In both cases, the sound pattern was to minimize sound energy bouncing off of walls; reflections creating unwanted multi-path cancellations. The horn featured a vertical diffraction slot that was narrower at the bottom which reduced the output for people sitting below the enclosure in the nearfield, and increased the output for those sitting farther away. [11] EV's sister company, Altec Lansing, marketed this product as the "Vari-Intense" horn. [12]

Gunness researched automated methods for analyzing the performance of a loudspeaker. In 1990 he delivered a paper to the AES describing a system which used pink noise and a filtered receiver to generate polar response curves plotting loudspeaker output patterns. [13]

Eastern Acoustic Works

In September 1995, Gunness moved his family, now including a son and a daughter, from Michigan to Massachusetts in response to his taking a position as senior engineer at Eastern Acoustic Works (EAW) in Whitinsville. [1] His first task was to set up a system for creating custom loudspeaker designs for specific clients and purposes, and he performed much field work, tuning and optimizing loudspeaker installations. He then began to research the concept of phased point source behavior with the goal of controlling the directional characteristics of a high-powered concert loudspeaker cluster. [14] This work led to the development of EAW's KF900 series concert touring system. [15] In 1997 he filed two patents related to this research: one for a downfill loudspeaker that would direct sound downward without being rigged differently than its upper neighbors, [16] and a method for creating a "common acoustical wavefront" of horizontally arrayed loudspeaker horns mounted in trapezoid enclosures which placed the acoustic center of the array very close to the rear of the enclosure. [17] The horn mouths minimized diffraction between enclosures. [18] The KF900 system incorporated digital signal processing (DSP) for each horizontal row of drivers in the loudspeaker cluster. Gunness said that bringing the DSP to fruition by way of rigorous mathematical performance analysis was a "massive undertaking" which gave him a broad foundation of computer analysis techniques he would draw from in later inventions. [1] The KF900 was deployed in mid-1998 for 11 Promise Keepers tour dates, and its response was measured during the shows as part of an iterative product optimization plan. In 2001, Eric Clapton used the KF900 system while touring in support of his Reptile album. [19] In his work to predict the performance of various KF900 loudspeaker configurations, Gunness used acoustical measurement and modeling software called FChart that he started developing while still at Electro-Voice. [19] Heinz Field, home of the Pittsburgh Steelers football team received an installed KF900 system, as did Fenway Park, home of the Boston Red Sox baseball team. [20] [21] The final system tuning at Fenway was performed using Smaart software. [22]

Gunness also designed the following EAW loudspeaker models: the long-throw MH433 trapezoid with rigging points, the install-only BH822 twin 12-inch "super" subwoofer, the LA400 touring subwoofer, and the large format arrayable MQ series. [3] [14]

Gunness Focusing

For years, Gunness had been looking for various electronic solutions to the undesirable characteristics of horns. At EV in 1985, Gunness noticed the performance differences between various shapes of horns, and theorized that an electronic filter might allow optimization. In early 1995, EV gained access to Altec Lansing's 1987 Acousta-CADD acoustic modeling software which revealed more loudspeaker performance characteristics than had previously been observed, but DSP programming tools were still inadequate for audio signal correction. In 2000, Greek electroacousticians John Mourjopoulos and Panagiotis 'Panos' Hatziantoniou described a method for smoothing precise audio analysis filters. [23] Building on this work, Gunness led a team of EAW engineers to develop a proprietary wavelet transform spectrogram for internal research. The EAW spectrogram reduced visual complexity by applying a zero-phase-shift low-pass filter to the audio signal under test using mirror-image infinite impulse response (IIR) filters. [24] The spectrogram revealed loudspeaker performance anomalies, allowing the engineering team to identify mechanisms they characterized as "two-port systems"; i.e. mechanisms demonstrating a single input, a single transfer function, and a single output. Such two-port systems were of interest because they could possibly be corrected with electronic filtering. Because of their variability the methodology would not be used on any of the mechanisms which appeared to be non-linear relative to signal level, spatial distribution ("coverage"), or over time, such as cone stiffness or surround compliance. This left several substantial "linear, time-invariant" (LTI) mechanisms that would yield to correction by digital filtering. These included 1) time-smear from the compression driver/phase plug interface, 2) horn resonance, 3) cone resonance, and 4) crossover phase linearity between adjacent bandpasses. [24] [25] In April 2005, EAW announced the NT Series, a line of 2-way bi-amplified self-powered loudspeakers incorporating the "new technology" which was initially called "Digital Transduction Correction" (DTC). [26] Mix magazine quoted Gunness identifying compression driver "time smear" as a longstanding loudspeaker problem that was countered by preconditioning in the audio signal. [26] Later that year, EAW dropped the DTC acronym and began promoting the technology as "Gunness Focusing". [25] [27]

At the AES convention in October 2005 in New York City, EAW project engineer William "Bill" Hoy and Gunness presented a paper describing the mathematics of the spectrogram. [28] At the same convention, Gunness spoke about the research and development which culminated in the new technology. He described how the spectrogram allowed the EAW engineering team to observe the mechanism of time smear occurring in the small space between the compression driver diaphragm and the phase plug. He discovered that only half of the compression driver's energy, at best, goes directly from the diaphragm through a phase plug slot or port and into the horn throat. The rest of the sound waves either reflect back to the compression driver surface or travel to another phase plug slot or port; in both cases the result is wave energy leaving the phase plug after the initial impulse. Gunness modeled this behavior mathematically and applied an inverted signal to cancel out the later wave energy. [24] Gunness filed a patent for the technology in March 2006. [29] Later that year, EAW introduced the UX8800, a DSP-based loudspeaker management system with four inputs and eight outputs. The UX8800 was offered to allow Gunness Focusing to be applied to selected pre-existing EAW products such as the KF700 line array series. [30] Gunness Focusing was nominated for but did not win a TEC Award in 2006. [31]

Line arrays

Gunness joined with EAW co-founder Kenton Forsythe and engineer Jeff Rocha to design the KF760 and KF730 series line array systems. The KF760 was a full-size 3-way system and the KF730 was a compact 3-way system. Either system could be augmented with ground-stacked or flown subwoofers. Common to the two different sizes of KF700 series products was the principal of "divergence shading" rather than the more usual intensity shading. The vertical output pattern of the individual line array elements was adjusted to optimize SPL received by near- and far-field audience areas. [32] This method avoided what Gunness said was a discontinuity between adjacent loudspeaker enclosures driven at different signal levels; he observed smeared transients and frequency response problems. [33] Gunness wrote about divergence shading and general line array issues in August 2000. [34] The KF760 product was revealed in May 2001. [35] The major concerts using the KF760s included The Boston Globe 's Jazz and Blues Festival in 2001, [36] Usher's 2002 Evolution tour, [37] Pearl Jam's 2003 Riot Act Tour, [38] the North American dates of Iron Maiden's 2003 Give Me Ed... 'Til I'm Dead Tour, [39] and Sir Paul McCartney playing in Moscow's Red Square in 2003. [40] Usher also used flown KF761 boxes for his vocal stage monitoring system; monitor engineer Maceo Price and sound company owner Tim Cain sat down with Gunness and Rocha, looking at prediction software results to determine which EAW product line would best suit the purpose of loud monitors that would not be in the way of Usher's dancing and set changes. [41] By late 2006, the KF760 and KF730 line array products had been augmented with optional Gunness Focusing by way of the UX8800 loudspeaker management system. THC Audio in Sofia used the UX8800/KF760 combination for Snoop Dogg's Bulgarian performance in 2008. [42]

Gunness appeared as a panelist at an AES line array tutorial and workshop in October 2002, held in Los Angeles. Don Keele, whose 1970s CD horn discoveries formed a basis for Gunness's later research, shared the panel. [43] In October 2003, Gunness wrote an article about "Digitally Steerable Array" (DSA) technology for Live Sound International magazine. [44] He expanded on the DSA concept the next month for the British Institute of Acoustics (IOA). [45] DSA allowed for adjustments to the vertical output width and vertical direction of a column of mid- to high-frequency loudspeaker drivers, in a frequency range from about 500 Hz to 16 kHz; a range critical to voice intelligibility. Gunness wrote that his research into DSA began in the 1990s and was largely based on the observations gained in developing the KF900 series. The proprietary FChart software was leveraged to create "DSA Pilot" to supply prediction and adjustment software for DSA installations. DSA Pilot allowed the installer to change the vertical pattern of a DSA product from 15 to 120 degrees high, and to change the main direction up or down by 30 degrees, without changing the position of the enclosure. [44] [46] Gunness told the IOA that each transducer in the vertical column must have its own DSP and amplifier for proper steering of the output pattern. For high frequency control, physically small drivers are required. One of the benefits of DSA was that the loudspeaker enclosure could be mounted flat against a vertical wall rather than tilted. The flat position eliminated the problem of acoustic energy radiating from the back of the enclosure, smearing the forward output with multi-path arrival times. [45]

In February 2000, Mackie Designs bought EAW but retained the EAW brand. In 2003, Mackie Designs changed its name to LOUD Technologies and moved previously Seattle-based Mackie manufacturing to Asia. In late 2006, LOUD moved EAW's loudspeaker production to China; the Massachusetts factory which had employed 100 assembly and woodshop workers was greatly reduced. [47] EAW's plant retained the ability to fill some custom loudspeaker orders, they kept a number of management and clerical positions, and also the design team of Kenton Forsythe, David Gunness and Jeff Rocha. Gunness continued to research and prototype loudspeakers, and he checked Chinese production examples for quality of workmanship. In January 2007, EAW co-founder Kenneth Berger, a senior vice president of LOUD, left the company. [48]

Fulcrum Acoustic

Gunness left EAW in January 2008 to join with partners Stephen Siegel and Chris Alfiero in the establishment of Fulcrum Acoustic, a loudspeaker design and manufacturing company. Gunness became Vice President of R&D, and Lead Product Designer. [1] [2] The goal of Fulcrum Acoustic was to produce loudspeakers with "advanced DSP algorithms as integral to their designs" which had become Gunness's signature style. [49] Gunness soon noticed that the time from initial concept to product launch was much faster at a small company. [3] Most of the employees of Fulcrum Acoustic are former EAW coworkers. [50]

Temporal Equalization

Gunness and Siegel turned their attention to coaxial loudspeakers, known for their desired single-point-source characteristics but also for various problems associated with intermodulation distortion—the low frequencies modulating the highs—and undesirable sonic variations in off-axis frequency response. Other negative aspects of traditional coaxial designs were their bulky weight and their lengthy axis requiring deep enclosures. Gunness and Siegel set about designing a coaxial with a common magnet for both low and high frequency drivers for weight savings and for reduced axial length, and a horn was developed to direct as much high frequency energy as possible away from the low frequency cone. A DSP solution called "Temporal Equalization" (TQ) was used to cancel out any remaining high frequency energy arriving at the moving cone. TQ was also used to cancel out high frequency horn reflections that returned to the compression driver. [51] [52] Gunness further developed his proprietary FChart software, renamed "Rayleigh" in honor of Lord Rayleigh, to enhance its capabilities for developing these and future products.

Gunness helped specify and design a 16-zone, 100-loudspeaker installation at the 25,500-square-foot (2,370 m2) Haze nightclub at Aria Resort and Casino in Las Vegas, and he joined with Jamie Anderson of Rational Acoustics to discuss the loudspeaker performance targets and system tuning process via Smaart software, the talk given at a technical tour held in June 2010 during the Infocomm convention. [53] Gunness said that system designer John Lyons asked for a subwoofer that would "crush" at all locations on the dance floor. Gunness responded by creating the US221 subwoofer with two 21-inch (530 mm) drivers. After hearing Haze's 130 dB SPL results, with a reported 10 dB of extra headroom because ten US221s were used, Lyons quipped that the system surpassed "crush" to establish "punish" as a benchmark. [54] The same month, the 65,000-square-foot (6,000 m2) Surrender nightclub at Encore Las Vegas opened with a Fulcrum Acoustic installation combining outdoor and indoor areas. Gunness aided in setting up and tuning the system. He noted that three US221 subwoofers supplied sufficiently high energy sound for the small dance floor. [55] In December 2012, Wired magazine wrote about how temporal corrections developed by Gunness cleaned up "the smear of sound" present in normal nightclub loudspeakers. [56]

Related Research Articles

<span class="mw-page-title-main">Subwoofer</span> Loudspeaker for low-pitched audio frequencies

A subwoofer is a loudspeaker designed to reproduce low-pitched audio frequencies, known as bass and sub-bass, that are lower in frequency than those which can be (optimally) generated by a woofer. The typical frequency range that is covered by a subwoofer is about 20–200 Hz for consumer products, below 100 Hz for professional live sound, and below 80 Hz in THX-certified systems. Thus, one or more subwoofers are important for high-quality sound reproduction as they are responsible for the lowest two to three octaves of the ten octaves that are audible. This very low-frequency (VLF) range reproduces the natural fundamental tones of the bass drum, electric bass, double bass, grand piano, contrabassoon, tuba, in addition to thunder, gunshots, explosions, etc.

<span class="mw-page-title-main">Loudspeaker</span> Converts an electrical audio signal into a corresponding sound

A loudspeaker is a combination of one or more speaker drivers, an enclosure, and electrical connections. The speaker driver is an electroacoustic transducer that converts an electrical audio signal into a corresponding sound.

<span class="mw-page-title-main">Audio crossover</span> Electronic filter circuitry used in loudspeakers

Audio crossovers are a type of electronic filter circuitry that splits an audio signal into two or more frequency ranges, so that the signals can be sent to loudspeaker drivers that are designed to operate within different frequency ranges. The crossover filters can be either active or passive. They are often described as two-way or three-way, which indicate, respectively, that the crossover splits a given signal into two frequency ranges or three frequency ranges. Crossovers are used in loudspeaker cabinets, power amplifiers in consumer electronics and pro audio and musical instrument amplifier products. For the latter two markets, crossovers are used in bass amplifiers, keyboard amplifiers, bass and keyboard speaker enclosures and sound reinforcement system equipment.

A woofer or bass speaker is a technical term for a loudspeaker driver designed to produce low frequency sounds, typically from 20 Hz up to a few hundred Hz. The name is from the onomatopoeic English word for a dog's deep bark, "woof". The most common design for a woofer is the electrodynamic driver, which typically uses a stiff paper cone, driven by a voice coil surrounded by a magnetic field.

<span class="mw-page-title-main">Sound reinforcement system</span> Amplified sound system for public events

A sound reinforcement system is the combination of microphones, signal processors, amplifiers, and loudspeakers in enclosures all controlled by a mixing console that makes live or pre-recorded sounds louder and may also distribute those sounds to a larger or more distant audience. In many situations, a sound reinforcement system is also used to enhance or alter the sound of the sources on the stage, typically by using electronic effects, such as reverb, as opposed to simply amplifying the sources unaltered.

<span class="mw-page-title-main">Horn loudspeaker</span> Loudspeaker using an acoustic horn

A horn loudspeaker is a loudspeaker or loudspeaker element which uses an acoustic horn to increase the overall efficiency of the driving element(s). A common form (right) consists of a compression driver which produces sound waves with a small metal diaphragm vibrated by an electromagnet, attached to a horn, a flaring duct to conduct the sound waves to the open air. Another type is a woofer driver mounted in a loudspeaker enclosure which is divided by internal partitions to form a zigzag flaring duct which functions as a horn; this type is called a folded horn speaker. The horn serves to improve the coupling efficiency between the speaker driver and the air. The horn can be thought of as an "acoustic transformer" that provides impedance matching between the relatively dense diaphragm material and the less-dense air. The result is greater acoustic output power from a given driver.

<span class="mw-page-title-main">Bass reflex</span> Type of loudspeaker enclosure with improved bass performance

A bass reflex system is a type of loudspeaker enclosure that uses a port (hole) or vent cut into the cabinet and a section of tubing or pipe affixed to the port. This port enables the sound from the rear side of the diaphragm to increase the efficiency of the system at low frequencies as compared to a typical sealed- or closed-box loudspeaker or an infinite baffle mounting.

Eastern Acoustic Works (EAW) is an American manufacturer of professional audio reinforcement tools, such as loudspeaker systems and processors. From 1978 to 1988 it was located at 59 Fountain Street in Framingham, Massachusetts, and subsequently One Main Street in Whitinsville, Massachusetts. It is now headquartered at 19 National Drive in Franklin, Massachusetts.

<span class="mw-page-title-main">Loudspeaker enclosure</span> Acoustical component

A loudspeaker enclosure or loudspeaker cabinet is an enclosure in which speaker drivers and associated electronic hardware, such as crossover circuits and, in some cases, power amplifiers, are mounted. Enclosures may range in design from simple, homemade DIY rectangular particleboard boxes to very complex, expensive computer-designed hi-fi cabinets that incorporate composite materials, internal baffles, horns, bass reflex ports and acoustic insulation. Loudspeaker enclosures range in size from small "bookshelf" speaker cabinets with 4-inch (10 cm) woofers and small tweeters designed for listening to music with a hi-fi system in a private home to huge, heavy subwoofer enclosures with multiple 18-inch (46 cm) or even 21-inch (53 cm) speakers in huge enclosures which are designed for use in stadium concert sound reinforcement systems for rock music concerts.

<span class="mw-page-title-main">Acoustic suspension</span> Loudspeaker cabinet design

Acoustic suspension is a loudspeaker cabinet design that uses one or more loudspeaker drivers mounted in a sealed box. Acoustic suspension systems reduce bass distortion which can be caused by stiff suspensions required on drivers used for open cabinet designs.

<span class="mw-page-title-main">Meyer Sound Laboratories</span> American audio equipment manufacturer

Meyer Sound Laboratories is an American company based in Berkeley, California that manufactures self-powered loudspeakers, multichannel audio show control systems, electroacoustic architecture, and audio analysis tools for the professional sound reinforcement, fixed installation, and sound recording industries.

<span class="mw-page-title-main">Line array</span> Loudspeaker system composed of linearly-mounted, in-phase speakers

A line array is a loudspeaker system that is made up of a number of usually identical loudspeaker elements mounted in a line and fed in phase, to create a near-line source of sound. The distance between adjacent drivers is close enough that they constructively interfere with each other to send sound waves farther than traditional horn-loaded loudspeakers, and with a more evenly distributed sound output pattern.

<span class="mw-page-title-main">Forsythe Audio</span>

Forsythe Audio Systems was an American manufacturer of professional audio equipment specifically, loudspeakers systems offering extremely high reliability and high fidelity for sound reinforcement professionals. All their designs were by Kenton Forsythe. It was located in Watertown, Massachusetts.

A coaxial loudspeaker is a loudspeaker system in which the individual driver units radiate sound from the same point or axis. Two general types exist: one is a compact design using two or three speaker drivers, usually in car audio, and the other is a two-way high-power design for professional audio, also known as single-source or dual-concentric loudspeakers. The design is favored for its compactness and behavior as an audio point source.

<span class="mw-page-title-main">Smaart</span> Audio measurement software

Smaart is a suite of audio and acoustical measurements and instrumentation software tools introduced in 1996 by JBL's professional audio division. It is designed to help the live sound engineer optimize sound reinforcement systems before public performance and actively monitor acoustical parameters in real time while an audio system is in use. Most earlier analysis systems required specific test signals sent through the sound system, ones that would be unpleasant for the audience to hear. Smaart is a source-independent analyzer and therefore will work effectively with a variety of test signals including speech or music.

<span class="mw-page-title-main">Clifford A. Henricksen</span> American inventor, American musician

Cliff Henricksen is a musician, inventor and audio technologist. He is self-taught as a musician with a graduate degree in mechanical engineering at Massachusetts Institute of Technology (MIT). Throughout his career Cliff has found innovative ways to apply engineering basics to electro acoustics and to audio technology as it applies to music and in particular to live music performance. He has invented and engineered a wide variety of technologies and products well known in the world of professional audio. Today he balances work in audio and work as a performing musician.

<span class="mw-page-title-main">Phase plug</span>

In a loudspeaker, a phase plug, phasing plug or acoustical transformer is a mechanical interface between a speaker driver and the audience. The phase plug extends high frequency response because it guides waves outward toward the listener rather than allowing them to interact destructively near the driver.

<span class="mw-page-title-main">Charlie Hughes (audio engineer)</span> American inventor and audio engineer (born 1965)

Charles Emory Hughes II is an American inventor and audio engineer. He is known for his work on loudspeaker design, and the measurement of professional audio sound systems. Hughes first worked for Peavey Electronics designing loudspeakers and horns where he was granted a patent for the Quadratic-Throat Waveguide horn used in concert loudspeakers. He worked for Altec Lansing for two years as chief engineer for the pro audio division and was granted two more patents. In 2021, Hughes was hired by Biamp as principal engineer.

Thomas J. Danley is an American audio engineer, electrical engineer and inventor, the holder of multiple patents for audio transducers, especially high-linearity, high-output professional horn loudspeaker systems. Danley first gained notice in the 1980s with his novel servomotor-driven subwoofer systems used to reproduce very low frequencies in concert tours and theme parks. In 2000 he advanced the implementation of multiple-entry horns in 2000 with several designs led by the SPL-td1, a seven-driver loudspeaker. In 2005, he started a new company, Danley Sound Labs, through which he patented further technologies and produced a wide variety of loudspeaker models based on these technologies.

<span class="mw-page-title-main">Fulcrum Acoustic</span> Manufacturer of professional loudspeakers

Fulcrum Acoustic is an American manufacturer of professional loudspeakers, including permanent-installation loudspeakers, portable loudspeakers, subwoofers, line arrays, stage monitors, and studio reference monitors. Their research and development offices and production facilities are located in Whitinsville, Massachusetts while their administrative offices are in Rochester, NY. Fulcrum Acoustic products are sold through an international distribution network and are deployed in houses of worship, sports venues, hospitality venues, concert halls, music festivals, theaters, and nightclubs.

References

  1. 1 2 3 4 5 6 King, Andrew (April–May 2012). "Profile: David Gunness". Professional Sound. 23 (2): 18. Retrieved January 12, 2013.[ permanent dead link ]
  2. 1 2 "About Us: David Gunness". Fulcrum Acoustic. Archived from the original on April 13, 2013. Retrieved January 7, 2013.
  3. 1 2 3 Berkow, Sam; Gunness, Dave. "David Gunness, Fulcrum Acoustic, on Speakers". ProAV. Sound & Video Contractor. Archived from the original on January 27, 2013. Retrieved January 7, 2013.
  4. ↑ U.S. patent 4,629,029 "Multiple driver manifold" David W. Gunness, for Electro-Voice, Inc. Filing date: November 15, 1985. Issue date: December 16, 1986.
  5. 1 2 Carlson, David; Gunness, David (November 12–16, 1986). "Loudspeaker Manifolds for High-Level Concert Sound Reinforcement" (PDF). Convention Paper. Los Angeles: Audio Engineering Society. Retrieved January 12, 2013.[ permanent dead link ] Hosted by fulcrum-acoustic.com
  6. ↑ "The MT Flying Manual" (PDF). Electro-Voice. February 1992. p. 5. Retrieved January 12, 2013.
  7. ↑ Hardin, Gregory L. (2008). Outstanding Sound Systems: The Practical How and Why. Lulu.com. pp. 97–98. ISBN   978-1-4357-2587-4.
  8. ↑ Shoepe, Zenon (December 16, 1995). "Eurosounds". Billboard. Vol. 107, no. 50. Nielsen Business Media. p. 72. ISSN   0006-2510.
  9. ↑ Sillitoe, Sue (October 1996). "Mark IV powers Metallica in US". Pro Sound News. 11 (10): 30.
  10. ↑ U.S. patent 4,685,532 "Constant Directivity Loudspeaker Horn" David W. Gunness, for Electro-Voice, Inc. Filing date: February 21, 1986. Issue date: August 11, 1987.
  11. ↑ U.S. patent 5,020,630 "Loudspeaker and Horn Therefor" David W. Gunness, for Electro-Voice, Inc. Filing date: December 8, 1989. Issue date: June 4, 1991.
  12. ↑ Ballou, Glen (2008). Handbook for Sound Engineers (4 ed.). CRC Press. p. 614. ISBN   978-0240809694. Dave Gunness, chief engineer at Electro-Voice at the time, developed a family of asymmetric directivity horns in the late 1980s and early 1990s. These were known as Vari-Intense devices.
  13. ↑ Gunness, David W. (September 1990). "Loudspeaker Directional Response Measurement". Convention Paper. Audio Engineering Society. Retrieved January 13, 2013.
  14. 1 2 "A Digitally Steered Line Array" (PDF). Audio Engineering Society – Pacific Northwest Region. June 2004. Retrieved January 7, 2013.
  15. ↑ Gunness, Dave; Speck, John F. S. (1997). "Phased PointSource Technology and the Resultant KF900 Series" (PDF). EAW White Paper. Eastern Acoustic Works. Archived from the original (PDF) on November 18, 2011. Retrieved January 13, 2013.
  16. ↑ U.S. patent 6,009,182 "Downfill Speaker for Large Scale Reproduction System" David W. Gunness, for Eastern Acoustic Works, Inc. Filing date: August 29, 1997. Issue date: December 28, 1999.
  17. ↑ Ballou 2012, p. 652
  18. ↑ U.S. patent 6,016,353 "Large Scale Sound Reproduction System Having Cross-Cabinet Horizontal Array of Horn Elements" David W. Gunness, for Eastern Acoustic Works, Inc. Filing date: October 31, 1997. Issue date: January 18, 2000.
  19. 1 2 Weener, Al (September–October 2001). "The Switch: Eric Clapton's Last Large Tour". Live Sound International. Archived from the original on July 22, 2012. Retrieved January 7, 2013.
  20. ↑ "Steelers Get Loud with EAW", Mix Online, May 1, 2002, archived from the original on October 24, 2006, retrieved January 14, 2013
  21. ↑ "EAW Takes KF900 Array to the Ballpark", Mix Online, July 17, 2003, retrieved January 14, 2013
  22. ↑ Rushton-Read, Sarah (July 11, 2003). "EAW Tunes a KF900 array for Boston's Fenway Park". Lighting and Sound International. PLASA Media. Archived from the original on April 2, 2015. Retrieved January 15, 2013.
  23. ↑ Hatziantoniou, Panagiotis D.; Mourjopolous, John N. (April 2000). "Generalized Fractional-Octave Smoothing of Audio and Acoustic Responses". Journal of the Audio Engineering Society. 48 (4). Audio Engineering Society: 259–280.
  24. 1 2 3 Gunness, David W. (October 2005). "Improving Loudspeaker Transient Response with Digital Signal Processing" (PDF). Convention Paper. Audio Engineering Society. Archived from the original (PDF) on May 12, 2012. Retrieved January 7, 2013. Hosted by EAW.com
  25. 1 2 "Gunness Focusing". NT Powered Loudspeakers with Gunness Focusing. Eastern Acoustic Works. Archived from the original on September 5, 2010. Retrieved January 7, 2013.
  26. 1 2 Staff (April 18, 2005). "EAW NT Series, MK Series Loudspeakers". Mix. Archived from the original on February 16, 2013. Retrieved January 7, 2013.
  27. ↑ "InfoComm 2005 Hot Products: Twelve products you absolutely should have seen at InfoComm 2005". Sound & Video Contractor. Las Vegas. June 2005. Archived from the original on January 27, 2013. Retrieved January 19, 2013.
  28. ↑ Gunness, David W.; Hoy, William R. (October 2005). "A Spectrogram Display for Loudspeaker Transient Response" (PDF). Convention Paper. Audio Engineering Society. Retrieved January 17, 2013.[ permanent dead link ] Hosted by fulcrum-acoustic.com
  29. ↑ U.S. patent 8,081,766 "Creating Digital Signal Processing (DSP) Filters To Improve Loudspeaker Transient Response" David W. Gunness, for LOUD Technologies, Inc. Filing date: March 6, 2006. Issue date: December 20, 2011.
  30. ↑ "A Processor With a Pint Of Gunness". FOH Online. San Francisco. October 25, 2006. Retrieved January 13, 2013.
  31. ↑ "2006 TEC Nominee details". TEC Awards. TEC Foundation. Archived from the original on February 16, 2013. Retrieved January 16, 2012.
  32. ↑ Murray, John (August 2003). "Real World: Concert Line Array Loudspeakers". Live Sound International. Archived from the original on November 26, 2013. Retrieved January 7, 2013.
  33. ↑ Murray, John (November 11, 2011). "Everything You Wanted To Know About Line Arrays (And Then Some)". ProSoundWeb. Retrieved January 18, 2013.
  34. ↑ Gunness, Dave (August 9, 2000). "Touring Line Array Technical Issues" (PDF). EAW Research Brief. Eastern Acoustic Works. Archived from the original (PDF) on September 7, 2012. Retrieved January 7, 2013.
  35. ↑ "MassAV Debuts EAW KF760 in Boston". Lighting and Sound International. PLASA Media. May 9, 2001. Archived from the original on March 4, 2016. Retrieved January 18, 2013.
  36. ↑ "2001 Boston Globe Jazz & Blues Festival Comes to Life with the EAW KF760 Line Array Deployed By massAV". Eastern Acoustic Works. June 2001. Archived from the original on February 28, 2005. Retrieved January 18, 2013.
  37. ↑ Rossington, Ruth (June 5, 2002). "GSI takes Crown Macro-Techs on Usher tour". Lighting and Sound International. PLASA Media. Archived from the original on March 4, 2016. Retrieved January 18, 2013.
  38. ↑ Keller, Daniel (August 2003). "The Long-Haul Machine: Pearl Jam christens a new system, keeping things under control". Live Sound International. Archived from the original on 2010-01-06. Retrieved 2013-01-18.
  39. ↑ Frembes, Linda Seid (December 2003). "Sound Profiles: On The Path To Continuing Growth". Live Sound International. Archived from the original on 2016-03-04. Retrieved 2013-01-18.
  40. ↑ "Sir Paul McCartney and Concert Sound's KF760s rock Russia". Eastern Acoustic Works. May 2003. Archived from the original on January 3, 2006. Retrieved January 18, 2013.
  41. ↑ Young, Clive (2004). Crank It Up: Live Sound Secrets of the Top Tour Engineers. Hal Leonard Corporation. p. 122. ISBN   0879307781.
  42. ↑ "Hip-Hop Legend Snoop Dogg Rocks the KF760's". THC Audio. November 25, 2008. Archived from the original on December 7, 2013. Retrieved January 18, 2013.
  43. ↑ "W10 – Loudspeaker Line Arrays – Part 1 (Theory & History, Tutorial)". 113th AES Convention. Audio Engineering Society. October 2002. Retrieved January 7, 2013.
  44. 1 2 Gunness, David (October 2003). "Factory Direct: Digital To Steer, Aim, Optimize – The development of EAW DSA Series loudspeakers". Live Sound International. Archived from the original on October 4, 2012. Retrieved January 18, 2013.
  45. 1 2 Gunness, David (November 8, 2003). "The Design and Implementation of Line Arrays Using Digital Signal Processing" (PDF). Institute of Acoustics . Retrieved January 18, 2013.[ permanent dead link ]
  46. ↑ Gunness, David (March 2005). "Controlling Loudspeaker Coverage" (PDF). Pro AV Magazine. Archived from the original (PDF) on 2013-05-27. Hosted by fulcrum-acoustic.com
  47. ↑ Robinson, Dave (December 11, 2006). "EAW to Shift Manufacturing to Asia". Pro Sound News Europe. Retrieved January 13, 2013.
  48. ↑ "EAW Offshoring Manufacturing – Cox Confident in Ongoing Quality" (PDF). 5 (4). January 2007: 1, 10. Retrieved January 13, 2013.{{cite journal}}: Cite journal requires |journal= (help)
  49. ↑ "About". Fulcrum Acoustic. Archived from the original on April 13, 2013. Retrieved January 18, 2013.
  50. ↑ Farrell, Michael B. (April 21, 2013). "Making music louder in Massachusetts". Boston Globe. Retrieved April 21, 2013.
  51. ↑ Gunness, Dave; Siegel, Stephen (February 20, 2009). "Fulcrum Acoustic Details The Development Of A New Coaxial Driver Design". ProSoundWeb. Retrieved January 7, 2013.
  52. ↑ "TQ Explained" (PDF). Fulcrum Acoustic. April 2010. Retrieved January 18, 2013.[ permanent dead link ]
  53. ↑ "Fulcrum Acoustic, Rational Acoustics Host Tech Tour at Haze Nightclub June 9". FOH Online. Las Vegas. June 2010.
  54. ↑ "Beyond 'Crush' to 'Punish': Haze Nightclub – at Aria, Las Vegas". GLS News. GLS Marketing. June 10, 2010. Retrieved January 18, 2013.
  55. ↑ "Fulcrum's newest install expands presence at Wynn Encore". News. Fulcrum Acoustic. June 1, 2010. Archived from the original on March 22, 2012. Retrieved January 18, 2013.
  56. ↑ Kaplan, Michael (December 2012). "Beats cleaned up: how David Gunness is beating 'the smear of sound'". Wired. Retrieved January 7, 2013.


This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.