DA20/DV20 Katana | |
---|---|
General information | |
Type | Two-seat light aircraft |
National origin | Austria (DV20) Canada (DA20) |
Manufacturer | Diamond Aircraft |
Status | Active |
Number built | 1,000+ [1] |
History | |
Manufactured | 1994–present |
Introduction date | 1992 |
First flight | 1991 |
Developed from | Diamond HK36 Super Dimona |
Developed into | Diamond DA40 Diamond Star |
The Diamond DV20/DA20 Katana is an Austrian-designed two-seat general aviation light aircraft. Developed and manufactured by Diamond Aircraft, it was originally produced in Austria as the DV20.
The DV20 shares many features from the earlier Diamond HK36 Super Dimona. It was introduced to service during 1993. During the 1990s, production of the type was commenced at a new facility in Canada in order to meet demand for the type within the North American market. The Canadian-produced aircraft are designated as the DA20. It has been a relative success on the market, having sold in excess of 1,000 aircraft by 2008 and multiple improved variants of the DA20 have been developed. Additionally, it has been further developed into the four-seat Diamond DA40 Diamond Star.
In 1981, a new company, Hoffmann Flugzeugbau, was formed in Austria with the aim of becoming a major aircraft manufacturer for general aviation purposes. [2] During the late 1980s, management at the firm continued to rapidly expand its range of products; it also underwent several changes in name and ownership, eventually becoming Diamond Aircraft. It was decided to develop a new two-seat aircraft, later designated as the DV20 Katana, using the earlier and successful Diamond HK36 Dimona as a basis. [2]
The DV20, while owing much of its design and sharing many features of the Dimona, had several major differences as well. In particular, it had a reduced wingspan, was equipped with flaps, and made use of a tricycle landing gear arrangement. [2] The Katana has also been developed with a philosophy of offering aircraft that weren't equivalent in terms of performance to any major existing product from competing manufacturers, consciously avoiding instances of direct head-to-head competition. [2] In 1991, the Katana conducted its maiden flight; during May 1993, the type received certification. [3] In 1993, the Katana was first displayed to the general public at the Paris Air Show. [4]
Originally placed into production in Austria, during the early 1990s, a purpose-built factory was established by Diamond in London, Ontario, Canada to produce the DV20, which was subsequently designated as the DA20. [5] The DA20 featured around 40 individual improvements, having been effectively revamped to take on the competitive general aircraft market in the region. [6] According to aerospace publication Flight International, the decision to transfer production to Canada was to meet demand for such an aircraft within the sizable North American market; in addition, the firm already considered itself secure in its dominance in the European general aircraft market. [7] In 1994, the first Canadian-produced DA20, a Rotax 912-powered A1 aircraft, was completed; it was the first Diamond aircraft available for sale in North America. Between 1994 and 1999, in excess of C$100 million was invested in the Canadian plant. [8]
During 1998, production of the Continental IO-240-B3B-powered C1 Evolution and Eclipse models commenced, which was also performed at the firm's Canadian facility. The C1 model featured several advances, including the adoption of a new engine, which was more powerful than the Rotax 912 and provided the plane with greater performance as a result; other improvements included increased comfort, the adoption of slotted-flaps, and an improved braking capability. [9] During the late 1990s, Diamond also developed a new four-seat aircraft, designated as the DA40, which had been heavily derived from the DA20. [10]
Both the DA20-A1 and C1 are certified under AWM 523-VLA in Canada, [11] as well as being under FAR 23 in the USA. The DA20 is certified in the utility category; in particular, it is permissible to intentionally spin it with flaps in the full up position. [12] In 2004, Diamond received Chinese certification for the DA20. Both models also hold Joint Aviation Authorities (JAA) certification. [13]
Although the DA20 is available with instrumentation and avionics suitable for flight under instrument flight rules (IFR), its plastic airframe lacks lightning protection and thus does not qualify for IFR certification. [14] [9] This limitation is not viewed as being relevant to most potential customers; according to aircraft publication Flying , "even when there were a lot of two-place trainers, there wasn't a lot of instrument training done in them...not too many owners of two-seaters fly them IFR". [9]
By 2010, production of the original A1 Katana model had come to an end, while the newer DA20-C1 model was still being manufactured. [15] In November 2008, the company announced that it would be offering an Aspen Avionics glass cockpit primary flight display as an option on the DA20. Diamond indicated the Aspen PFD would be easy to incorporate into the existing instrument panel design because it mounts in a standard round instrument hole. In October 2009, the company introduced the Garmin G500 glass cockpit as an option. [16]
The Diamond DA20 Katana is a low-wing cantilever monoplane, commonly operated as a low-cost two-seat trainer aircraft. According to Flight International, it has been considered to be relatively unorthodox amongst trainers, utilising a design that makes heavy use of the manufacturer's prior glider products. [5] The Katana benefits in the training role from its relative ease of handling and responsive controls. In comparison to traditional trainer aircraft, it has been marketed as substantially reducing the associated fuel and maintenance costs of operation, while providing favourable flight qualities and the necessary range for trainees to gain experience with. [5] For a time, the Katana was the only two-seat composite training aircraft available that offered both low costs and incorporated advanced technologies, giving it an effective niche in the sector. [2]
The Katana has several distinctive features, including its all-composite construction, low-mounted wing, T-tail arrangement, and a castoring nosewheel. All models make use of a composite airframe which is constructed of glass- and carbon-fiber reinforced plastic. [14] [5] The one-piece fuselage has removable wings, which assists with transportation and servicing activities. The wings themselves have transparent plexiglas panels present so that key control elements can be readily inspected without disassembly. [5] The airframe is complete with a sleek finish across the entirety of its exterior, which serves to eliminate corrosion and rivets in order to lower maintenance requirements. [5] The maintenance costs of the Katana have been considered to be relatively low. [5]
The Katana provides excellent external visibility to its pilots via the use of a one-piece bubble canopy, which is hinged at the rear, enabling easy entry using the built-in steps. [5] The cockpit features a comprehensive six-unit instrumentation panel on the left-hand side, the majority of avionics-related controls and displays in the center of the console, and engine-specific elements are allocated to the right-hand panel. The Katana makes use of individual stick-type flight control, as opposed to yokes, along with key engine controls on a centrally-positioned pedestal. [5] There has been positive reports on the aircraft's comfort, the crew accommodated on fixed-position reclined seats with a small personal stowage area located directly behind; the noise levels are so low that headsets are typically unnecessary for voice communication, although an intercom system is integrated for this purpose. [5]
The nose wheel of the DA20 is not linked to the rudder pedals and turns while taxiing are made with differential braking, with rudder steering becoming more effective as airspeed increases. [17] The Katana possesses a higher glide ratio than many of its competitors; its glide ratio is 11:1 and the DA20-A1 is 14:1. [18] The aircraft does not feature any instances of vortex generators, wing fences or many other aerodynamic devices, aside from the integral winglets, which positively contribute to roll stability, drag-reduction, and enhanced aileron effectiveness. The Katana's T-tail configuration has also been claimed to reduce the negative effects of propeller-generated slipstream on the aircraft's pitch control as well as increase low-speed pitch authority. [5]
The wings have washout, which causes the wing roots to stall in advance of the wingtips, which has the effect of the ailerons being fully effective well after the onset of a primary stall condition. [5] Other unfavourable flight conditions are often guarded against, such as a wing drop, which may be produced only as a consequence of prolonged and excessive elevator application during a steep climbing turn, and can be rectified by the relaxation of back pressure. The control forces across all regimes are well-balanced, which reportedly reduces the frequency to which trimming of the control surfaces may need to be performed. [5] Two of the three flight control surfaces, being the elevators and ailerons, are push-rod actuated, while control of the rudder is achieved via cables. As a measure to protect against instances of over-rotation, a reinforced plastic skid is present underneath the tail unit. [5]
The Katana C is fitted with a Continental O-240 piston engine, [5] while the earlier "A" model has a Rotax 912. Variants powered by the Rotax engine have been approved for use with standard automotive gasoline, automotive-grade oil Mobil is also recommended for use as a lubricant. [19] [5] In the event of a loss of coolant, the Rotax engine is capable of 'dry running' for up to 2 hours without any resulting damage if run at or below 56 percent power. The aircraft's constant-speed propeller is hydraulically actuated and fitted with composite blades. [5] A unique clutch arrangement automatically disengages the propeller from the engine in the event of an obstacle being struck. [5]
Embry-Riddle Aeronautical University provided the Academy Flight Screening (AFS) program for the United States Air Force Academy in DA20-C1 Falcons, which were specially ordered with slightly smaller fuel tanks to save weight and primary flight instruments on the right side of the aircraft. Embry-Riddle operated a fleet of DA-20s at the Academy. [20] The AFS program was discontinued in 2007.
Doss Aviation, under contract for the United States Air Force, currently operates a fleet of DA-20s at the Pueblo Memorial Airport in the Initial Flight Training (IFT) program. [21] Potential USAF Pilots, Combat Systems Officers, and RPA pilots that do not have a private pilot's license must go through the Doss screening program and receive time in the DA20 before going on to their respective training programs. [22]
The DA20 is popular with flight training schools and is also operated by private individuals. Moncton Flight College in New Brunswick, Canada operates a fleet of 45 Diamond DA20-C1 Eclipses. [25]
Data from DA20 webpage [29]
General characteristics
Performance
Avionics
Related lists
The Cessna 182 Skylane is an American four-seat, single-engined light airplane built by Cessna of Wichita, Kansas. It has the option of adding two child seats in the baggage area.
Diamond Aircraft Industries is a manufacturer of general aviation aircraft and motor gliders, based in Wiener Neustadt, Lower Austria, Austria. It has been a subsidiary of the Chinese company Wanfeng Aviation since 2017. It is the third largest manufacturer of aircraft for the general aviation sector, and has operational facilities in both Lower Austria and Ontario, Canada, as well as further production lines operated as joint ventures in other nations, such as China.
The Rotax 912 is a horizontally-opposed four-cylinder, naturally-aspirated, four-stroke aircraft engine with a reduction gearbox. It features liquid-cooled cylinder heads and air-cooled cylinders. Originally equipped with carburetors, later versions are fuel injected. Dominating the market for small aircraft and kitplanes, Rotax produced its 50,000th 912-series engine in 2014. Originally available only for light sport aircraft, ultralight aircraft, autogyros and drones, the 912-series engine was approved for certified aircraft in 1995.
The Symphony SA-160 is a CAR 523 certified, two-seat, single-engine, high-wing airplane that was manufactured by Symphony Aircraft Industries in Trois-Rivières, Quebec, Canada in the mid-2000s.
The Liberty XL2 is a two-seat, low-wing, general aviation aircraft manufactured from 2004–2011 by Liberty Aerospace of Melbourne, Florida. A derivative of the Europa XS kit plane, it serves both as a touring aircraft for private flyers and as a flight trainer.
The Diamond DA40 Diamond Star is an Austrian four-seat, single-engine, light aircraft constructed from composite materials. Built in both Austria and Canada, it was developed as a four-seat version of the earlier DA20 by Diamond Aircraft Industries.
The Rotax 914 is a turbo-charged, four-stroke, four-cylinder, horizontally opposed aircraft engine with air-cooled cylinders and water-cooled cylinder heads. It is designed and built by the Austrian company BRP-Powertrain, owned by Bombardier Recreational Products (BRP), as part of its Rotax brand.
The Continental O-240 engine is a four-cylinder, horizontally opposed, air-cooled aircraft engine that was developed in the late 1960s for use in light aircraft by Continental Motors, Inc. The first O-240 was certified on 7 July 1971.
The Remos G3 Mirage and Remos GX are German high wing, two seat, single engine light aircraft, built by Remos AG of Pasewalk. The aircraft is supplied as a kit for amateur construction or complete and ready-to-fly.
The Pipistrel Sinus is a two-seat, single-engine ultralight motor glider, developed and manufactured by Pipistrel in Slovenia and Italy. Its design has served as the base for future Pipistrel developments such as the Virus and Alpha Trainer.
The Lockwood Drifter is a family of high wing, single engine, pusher configuration, open cockpit, one and two-seat kit aircraft that was first introduced in the 1980s by Maxair and remains in production today by Lockwood Aircraft of Sebring, Florida.
The Cranfield A1 Eagle is a British single-seater aerobatics monoplane, powered by a flat-six engine. Two seats can be fitted for training purposes. Only one was built.
The Coavio DF 2000 is a single-engine, high-wing all-metal ultralight aircraft with side-by-side seating for two. Built in Italy, production began in 2004.
The TL Ultralight TL-132 Condor and TL-232 Condor Plus are single engine, highwing ultralight aircraft designed and built in the Czech Republic in the mid-1990s. They remain in production in 2010.
The Roko Aero NG4 is a single-engined sport aircraft, available in both light-sport aircraft and ultralight models, which seats two side by side. It is in production in the Czech Republic.
The Tecnam 2010 is a four-seat, high wing, single engine light aircraft of mixed metal and carbon-fiber-reinforced polymer construction. Designed and built in Italy, it was first presented in public in April 2011.
The Diamond HK36 Super Dimona is an extensive family of Austrian low-wing, T-tailed, two-seat motor gliders that were designed by Wolf Hoffmann and currently produced by Diamond Aircraft Industries.
The Partenair Mystere is a Canadian two-seat, pusher configuration monoplane that was designed by Partenair Design of Saint-Jean-sur-Richelieu, Quebec and intended for amateur construction from kits.
The ARV Griffin is a Canadian homebuilt aircraft that was designed by Dave Marsden of the University of Alberta and produced by Canada Air RV and later by AC Millennium Corp, both of Edmonton. When it was available the aircraft was supplied as a kit for amateur construction.
The Aero Bravo Patriot is an ultralight aircraft from the Brazilian manufacturer Aerobravo Indústria Aeronáutica Ltda.