| EEL ULF-2 | |
|---|---|
 | |
| Role | Microlight |
| National origin | Germany |
| Manufacturer | Entwicklung und Erprobung von Leichtflugzeugen (EEL) |
| Designer | Dieter Reich |
| First flight | October 1993 |
| Number built | 15 (2019) |
The EEL ULF-2 is a German low-wing, conventional landing gear, single-seat motor glider that was designed by Dieter Reich and is provided in the form of plans by Entwicklung und Erprobung von Leichtflugzeugen (English: Development and Testing of Light Aircraft) for amateur construction. [1] [2]
The prototype was built in 1993 by Anton Quanz with Horst Fischer building the engine installation and electrical system. The ULF-2 first flew in October 1993. [2]
The ULF-2 is predominantly constructed from northern pine or Douglas fir, with spruce and birch plywood and covered with doped aircraft fabric. The engine cowling, wing tips and fairings are made from fibreglass. The 11 m (36.1 ft) span wing features a Wortmann FX 63-137 airfoil and top surface spoilers. The aircraft mounts a ballistic parachute full-aircraft recovery system. The landing gear is conventional with a steerable tailwheel. The 54 cm (21 in) wide cockpit features a pilot seat inclined at a 33° angle. [1] [2] [3]
The recommended engine is from a Citroën Visa automobile, which consumes 4.0 L/h (1.06 US gallon per hour) and produces 24 kW (32 hp). The engine retains its automobile muffler and catalytic converter, runs on unleaded auto fuel, stored in a fuselage-mounted aluminium fuel tank with a capacity of 33 litres (7.3 imp gal; 8.7 US gal). The propeller is powered via a belt reduction drive. The muffler system allows the aircraft to comply with the ICAO Annex 16, Chapt. 10 noise requirements of 55 dB(A). [1] [2] [3]
The aircraft's wings fold on gimbal joints for storage or ground transportation in a trailer. [2]
The ULF-2 received its Certificate of Airworthiness in February 1995. As a result of his design work Reich received the OUV Hans-Becker-Prize in June 1997. The plans consists of 29 sheets of blueprints, a 50-page construction manual and a 20-page flight manual, available in both English and German. The plans cost €350 and a completed aircraft is estimated to cost €8000. [2] [4]
The aircraft has very benign stall characteristics, resulting in a controllable slow speed mush condition. [2]
The first ULF-2 completed by a customer was flown in 1999 and a total 15 have been finished and flown. [2]
Data from World Directory of Leisure Aviation 2003-04 and company website [1] [3]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Schempp-Hirth Janus is a high performance two-seat glider that was built by Schempp-Hirth GmbH. It was the first high-performance two-seater.
The Schleicher ASW 15 is a single-seat sailplane designed in 1968 by Gerhard Waibel and manufactured by Alexander Schleicher GmbH & Co. The ASW 15 has shoulder-mounted wings and an all-flying tailplane, with its single tow-release placement a compromise between winching and aerotowing. The later ASW 15B had several improvements, including a tow-release placed on the plane of symmetry, an 11 cm taller rudder, a slightly larger main wheel, and the provision of a 90-litre water ballast system.
The Glaser-Dirks DG-400 is a single-seat self-launching motorglider that was produced by Glaser-Dirks between 1981 and 1992. It was the first self-launching motorglider with retractable engine and propeller to be produced in large numbers.
The Caproni Vizzola C22 Ventura was a light jet-powered aircraft developed in Italy for use as a military trainer. It was of conventional sailplane configuration and bore a family resemblance to the Caproni Calif gliders, although the Ventura had an almost entirely metal structure. The student and instructor sat side by side under an expansive canopy, and weapons hardpoints were provided under each of the slender, high-mounted wings. It had retractable, tricycle undercarriage.
The VSO 10 Vosa is a Standard and Club-Class glider designed and manufactured in the Czechoslovak Republic from December 1978 as a replacement for the VT-116 Orlik II.
The Valentin Taifun is a two-seat self-launching sailplane designed and built by Valentin Flugzeugbau GmbH of Hasfurt, Germany.
The ProFe D-10 Tukan is a Czech high-wing, strut-braced, T-tailed, two-seat motor glider that was designed and produced by ProFe and made available in kit form for amateur construction.
The ProFe Banjo is a family of Czech high-wing, strut-braced, T-tailed gliders and motor gliders designed and produced by ProFe in kit form for amateur construction.
The TeST TST-1 Alpin is a Czech shoulder-wing, single-seat, pusher configuration motor glider that was designed and produced by TeST.
The TeST TST-6 Duo is a Czech shoulder-wing, two-seats in side-by-side configuration motor glider that was designed and produced by TeST of Brno.
The TeST TST-7 Junior is a Czech shoulder-wing, single-seat motor glider that was designed and produced by TeST of Brno. When it was available the aircraft was supplied as plans, in kit form for amateur construction or as a complete ready-to-fly aircraft. Production is now complete and the aircraft is no longer available new.
The EEL ULF 1 is a West German high-wing, single-seat, foot-launched, microlift glider that was designed by Dieter Reich. When it was available it was provided in the form of plans by Entwicklung und Erprobung von Leichtflugzeugen (EEL) for amateur construction. By the end of 2019 the company website had been take down and it is likely that the company has gone out of business.
The Protoplane Ultra is a French ultralight aircraft, designed and produced by Protoplane of Bagnères-de-Bigorre. The aircraft is supplied as a complete ready-to-fly aircraft.
The Civil Aviation Department MG-1 was a one-off Indian motor glider, seating two side by side and first flown in 1983.
The Pennec Gaz'Aile 2 is a French amateur-built aircraft, designed by Serge Pennec of Locmaria-Plouzané and supplied in the form of plans for amateur construction.
The Pipistrel Apis-Bee, also called the Apis/Bee, is a Slovenian mid-wing, single-seat glider and motor glider that was designed and produced by Pipistrel.
The Distar UFM-13 Lambada is a Czech shoulder-wing, two-seat motor glider originally designed and produced by Urban Air and now built by Distar Air of Ústí nad Orlicí.
The Nippi NP-100 Albatross was a Japanese two side-by-side seat motorized glider, powered by a ducted fan rather than the usual propeller. It did not go into production.
Entwicklung und Erprobung von Leichtflugzeugen (EEL) is a German aircraft design firm based in Putzbrunn. The company was founded in 1976 by Heiner Neumann and Dieter Reich. It specializes in the design of gliders and motor gliders, provided in the form of plans for amateur construction.
The Wega 180 is a Brazilian amateur-built aircraft designed and produced by Wega Aircraft of Palhoça, Santa Catarina, introduced at the Sun 'n Fun airshow in 2013. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
{{cite web}}: CS1 maint: year (link){{cite web}}: CS1 maint: year (link)