Electrokinetic remediation

Last updated

Electrokinetic remediation, also termed electrokinetics, is a technique of using direct electric current to remove organic, inorganic and heavy metal particles from the soil by electric potential. [1] [2] [3] The use of this technique provides an approach with minimum disturbance to the surface while treating subsurface contaminants.

Contents

System Components

A basic electrokinetics remediation site contains an external direct current source, a positively charged electrode (or anode) and a negatively charged electrode (or a cathode) placed into the ground. Placement of electrodes are based on the size and shape of known contaminant plumes. The removal of contaminants and prevention of plume migration are big influences in determining the arrangement of electrodes. Each electrode is encased in a reservoir well in which an electrolytic solution can be injected. [4] The electrolytic solutions serve both as a conducting media (or pore fluid) and as a means to extract contaminants and introduce chemicals or biological entities. [5] Another use of the electrolytic solution is for control and/or depolarization of electrode reactions. Immersed in a solution the electrodes can result in oxidation at the anode site and the reduction at the cathodic site. [1] The oxidation and formation of an acidic front are byproducts of the process and cause varying degree of influence to the system. By pumping, processing and testing the electrolytic solution at each electrode site you can extend the life and efficiency of the system.

Method

When current is applied, by the direct power source, to the electrodes, migrations occur beneath the soil surface. Although many types of migrations occur in tandem with the current there are two driving migrations within electrokinetics; ionic migration and electrophoresis. When the electrolytic solution is injected within the soil part of the ionic solution forms a diffuse double layer with soils and contaminants. This diffused double layer will aid in the ionic drift that will occur as the current passes through the soil and surrounding liquid, this process is called electroosmosis. [1] The thickness of the diffused double layer is a function of ionic composition of bulk solution and the average charge density of hydration products. [3] As the electrolyte concentration increases the diffuse double layer thickness decreases. Electrophoresis is the mass flux of charged particles under an electric field. [4] Both processes work at the same time but in a counter current manner. The charged particles are driven by electrophoresis flow from the cathode to the anode while electrolytic solution flows from the anode to the cathode. Of the two main processes electrophoresis (or electromigration) is more dominant than electroosmosis. [2] Electrophoresis serves as the driving factor that induces the flow of electroosmosis in the opposite direction. Electromigration also serves as the major component for ionic contaminant removal. For electromigration to occur absorbed material must be dissolved to an ionic form whether they are metals, organic or inorganic particles. [1] Electroosmotic flow between the electrodes promotes the development of a low-pH environment in the soil. This low pH environment inhibits metallic contaminants from being sorbed onto soil particle surfaces which aids in the formation of compounds making electrokinetics possible. [6] By this thought it is possible to acidify the soil and induce the release of absorbed heavy metals. [2]

Applications

Electrokinetic remediation is applied to many contaminants that can be dissolved within groundwater. Heavy metals are one of the main contaminants that are removed by the electrokinetics process. Some metals like cadmium (II) can be removed with high consequences on energy expenditure. Chromium (III) can be removed but with low efficiency because of the ease of hydrolysis allowing it to sorb to other substances. Chromium (IV) is also a candidate for electrokinetics removal although chromium (IV) migration is retarded in the presence of sulfur because it will break down into chromium (III). [1] Other heavy metal species that are tested and reported to be treatable include; mercury, zinc, iron, lead, copper, and magnesium. [5] [6]

Electrokinetics is also possible with alkali and alkaline earth metals which travel faster in most mediums than heavy metals. At tests between 20 and 30 volts, alkali metals were known to move between 50 and 60 cm per day per volts whereas heavy metal moved at velocities between 10 and 20 cm per day per volts. [2] [7] It is possible that this difference could be because of the slow desorption and dissolution of heavy metals. Electrokinetics can also be used to treat polar organic compounds (phenol and acetic acid) and radionucleotides (radium), toxic anions (nitrates and sulfates), dense, non-aqueous-phase liquids (DNAPLs), cyanide, petroleum hydrocarbons (diesel fuel, gasoline, kerosene and lubricating oils), halogenated pollutants, explosives, halogenated and polynuclear aromatic hydrocarbons. [5]

Advantages

One of the advantages of electrokinetics is that the remediation can be conducted in situ (within the remediation site) to treat contaminants in low permeability zones to overcome accessibility of contaminants or delivery of treatment. [8] Remediation can also occur ex situ (removed from the natural site) to have contaminants tested and treated within a laboratory. This versatility of treatment location can be very cost effective. Electrokinetics has the advantage of use in saturated or unsaturated soils because of the insertion of pore fluid. Remediation can also occur despite soil stratifications or homogeneity. [4] For soils that are low in permeability like kaolite and clayey sands it is possible to remove up to 90% of heavy metal contaminants. In many cases pretreatment of soil should be made to determine appropriate working conditions of the soil. [6]

One thing to note is that the potential profile in soils can be determined by the ionic distribution of pore fluid. Because ion distribution effects the efficiency of the electrokinetics system, engineers like John Dzenitis have done comprehensive study to find key reactions around the electrodes that can be used to create models for ionic flowrate prediction. [2] These models can then be interpreted to determine if electrokinetics remediation is the best choice for a given site.

Limitations

A major limitation of electrokinetics is the introduction of an external fluid into the soil. If the contaminant cannot be dissolved it is not possible to extract the contaminant of interest. [5] Electrolysis near the electrodes can alter the pH of the soil especially if the current is induced for an extended period of time. Extended use of electrokinetics system can also cause acidic conditions around the electrodes sometimes reacting with contaminants. If increased acidification of the soil is not environmentally acceptable the use of electrokinetics should be reevaluated. [6] Large metal objects that are buried underground also pose as a limitation to electrodes because they offer a path to short circuit the system. Buried metal objects can also change the voltage gradient and decrease or stop the flow. The removal of volatile organic compounds from the soils can increase the soil vapor concentration. Counterintuitively, highly permeable soils lower the efficiency of electrokinetics. Where a low permeable soil like clay can receive up to 90% initial contaminant removal a low permeable soil like peat achieves about 65% removal of initial contaminants.

Another major limitation of the electrokinetics process is the decrease in the electric potential of the system. Different polarization effects can decrease how the system runs. For instance: Activation polarization can occur during the electrokinetic remediation process removing gas bubbles that form on the surface of the electrodes during conductivity. Resistance polarization can occur after the electrokinetic remediation process has started a white layer can be observed. Just like in hard water stains this layer may be the insoluble salt and other impurities that inhibit conductivity. Concentration polarization happens when hydrogen ions generated at the anode are attracted to the cathode and the hydroxide ions generated at the cathode are attracted to the anode. If neutralization occurs the potential between the system drops. [6] Local flattening of the electrical potential profile can also cause the difference in migration. [2]

Case Studies

In many cases the study of specific site occurrences with electrokinetics remediation can lead to new advancements in the technology. Many times electrokinetics remediation will be coupled with other remediation forms to handle site specific issues. At a Danish Wood Perseveration copper was a heavy metal that polluted the soil in two forms; ionic solution with different complexes within the soil or a crystal lattice of soil minerals. [9] For this site soil pH was a parameter of great importance because of an increased amount of copper present as ionic solution. By creating active barriers or exchange membranes that prevent ions from traveling from the electrode compartment into the soil. [9] The separation of the soil from the electrode is designed to deter the acidification of the cathode and the current loss as highly mobile ions pass from electrode site through the soil. [9]

In 1995 at the Paducah site, in Kentucky, USA a new technique was developed for removing heavy metals from soils. Called the Lasagna Process, it simply is the creation of several horizontal permeable zones used to provide treatment through the contaminated soil matrix by adding different admixtures to the electrolytic solution. Admixtures like sorbents, catalytic reagents, buffering solutions, oxidizing agents in this system are applied through a vertical system with the anode near the bottom and the cathode near the top. [6] [8] [10] The orientation of vertical anode and cathode system make recycling of fluid and system treatment easier. The formation of the lasagna layers is due to fracturing in over-consolidated clays because of horizontal electrodes. Coupling of the horizontal electrodes with a vertical pressuring system make this method especially effective in removing contaminants from deeper layers of the soil. The first test of this process proved 98% effective of removing trichloroethylene from the Paducah site. Electrokinetic remediation is also suitable for use at sites with radioactive contamintion. [11]

Related Research Articles

<span class="mw-page-title-main">Electrochemistry</span> Branch of chemistry

Electrochemistry is the branch of physical chemistry concerned with the relationship between electrical potential difference and identifiable chemical change. These reactions involve electrons moving via an electronically-conducting phase between electrodes separated by an ionically conducting and electronically insulating electrolyte.

<span class="mw-page-title-main">Electrolysis</span> Technique in chemistry and manufacturing

In chemistry and manufacturing, electrolysis is a technique that uses direct electric current (DC) to drive an otherwise non-spontaneous chemical reaction. Electrolysis is commercially important as a stage in the separation of elements from naturally occurring sources such as ores using an electrolytic cell. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity."

<span class="mw-page-title-main">Electroplating</span> Creation of protective or decorative metallic coating on other metal with electric current

Electroplating, also known as electrochemical deposition or electrodeposition, is a process for producing a metal coating on a solid substrate through the reduction of cations of that metal by means of a direct electric current. The part to be coated acts as the cathode of an electrolytic cell; the electrolyte is a solution of a salt of the metal to be coated, and the anode is usually either a block of that metal, or of some inert conductive material. The current is provided by an external power supply.

<span class="mw-page-title-main">Lithium-ion battery</span> Rechargeable battery type

A lithium-ion or Li-ion battery is a type of rechargeable battery that uses the reversible intercalation of Li+ ions into electronically conducting solids to store energy. In comparison with other commercial rechargeable batteries, Li-ion batteries are characterized by higher specific energy, higher energy density, higher energy efficiency, a longer cycle life, and a longer calendar life. Also noteworthy is a dramatic improvement in lithium-ion battery properties after their market introduction in 1991: within the next 30 years, their volumetric energy density increased threefold while their cost dropped tenfold.

<span class="mw-page-title-main">Electro-osmosis</span> Movement of liquid through a conduit due to electric potential

In chemistry, electro-osmotic flow is the motion of liquid induced by an applied potential across a porous material, capillary tube, membrane, microchannel, or any other fluid conduit. Because electro-osmotic velocities are independent of conduit size, as long as the electrical double layer is much smaller than the characteristic length scale of the channel, electro-osmotic flow will have little effect. Electro-osmotic flow is most significant when in small channels, and is an essential component in chemical separation techniques, notably capillary electrophoresis. Electro-osmotic flow can occur in natural unfiltered water, as well as buffered solutions.

The chloralkali process is an industrial process for the electrolysis of sodium chloride (NaCl) solutions. It is the technology used to produce chlorine and sodium hydroxide, which are commodity chemicals required by industry. Thirty five million tons of chlorine were prepared by this process in 1987. The chlorine and sodium hydroxide produced in this process are widely used in the chemical industry.

<span class="mw-page-title-main">Proton-exchange membrane fuel cell</span> Power generation technology

Proton-exchange membrane fuel cells (PEMFC), also known as polymer electrolyte membrane (PEM) fuel cells, are a type of fuel cell being developed mainly for transport applications, as well as for stationary fuel-cell applications and portable fuel-cell applications. Their distinguishing features include lower temperature/pressure ranges and a special proton-conducting polymer electrolyte membrane. PEMFCs generate electricity and operate on the opposite principle to PEM electrolysis, which consumes electricity. They are a leading candidate to replace the aging alkaline fuel-cell technology, which was used in the Space Shuttle.

Capillary electrophoresis (CE) is a family of electrokinetic separation methods performed in submillimeter diameter capillaries and in micro- and nanofluidic channels. Very often, CE refers to capillary zone electrophoresis (CZE), but other electrophoretic techniques including capillary gel electrophoresis (CGE), capillary isoelectric focusing (CIEF), capillary isotachophoresis and micellar electrokinetic chromatography (MEKC) belong also to this class of methods. In CE methods, analytes migrate through electrolyte solutions under the influence of an electric field. Analytes can be separated according to ionic mobility and/or partitioning into an alternate phase via non-covalent interactions. Additionally, analytes may be concentrated or "focused" by means of gradients in conductivity and pH.

Electrocoagulation (EC) is a technique used for wastewater treatment, wash water treatment, industrially processed water, and medical treatment. Electrocoagulation has become a rapidly growing area of wastewater treatment due to its ability to remove contaminants that are generally more difficult to remove by filtration or chemical treatment systems, such as emulsified oil, total petroleum hydrocarbons, refractory organics, suspended solids, and heavy metals. There are many brands of electrocoagulation devices available, and they can range in complexity from a simple anode and cathode to much more complex devices with control over electrode potentials, passivation, anode consumption, cell REDOX potentials as well as the introduction of ultrasonic sound, ultraviolet light and a range of gases and reactants to achieve so-called Advanced Oxidation Processes for refractory or recalcitrant organic substances.

<span class="mw-page-title-main">Double layer (surface science)</span> Molecular interface between a surface and a fluid

In surface science, a double layer is a structure that appears on the surface of an object when it is exposed to a fluid. The object might be a solid particle, a gas bubble, a liquid droplet, or a porous body. The DL refers to two parallel layers of charge surrounding the object. The first layer, the surface charge, consists of ions which are adsorbed onto the object due to chemical interactions. The second layer is composed of ions attracted to the surface charge via the Coulomb force, electrically screening the first layer. This second layer is loosely associated with the object. It is made of free ions that move in the fluid under the influence of electric attraction and thermal motion rather than being firmly anchored. It is thus called the "diffuse layer".

<span class="mw-page-title-main">Lithium-ion capacitor</span> Hybrid type of capacitor

A lithium-ion capacitor is a hybrid type of capacitor classified as a type of supercapacitor. It is called a hybrid because the anode is the same as those used in lithium-ion batteries and the cathode is the same as those used in supercapacitors. Activated carbon is typically used as the cathode. The anode of the LIC consists of carbon material which is often pre-doped with lithium ions. This pre-doping process lowers the potential of the anode and allows a relatively high output voltage compared to other supercapacitors.

The lithium–air battery (Li–air) is a metal–air electrochemical cell or battery chemistry that uses oxidation of lithium at the anode and reduction of oxygen at the cathode to induce a current flow.

A potassium-ion battery or K-ion battery is a type of battery and analogue to lithium-ion batteries, using potassium ions for charge transfer instead of lithium ions. It was invented by the Iranian/American chemist Ali Eftekhari in 2004.

<span class="mw-page-title-main">Separator (electricity)</span>

A separator is a permeable membrane placed between a battery's anode and cathode. The main function of a separator is to keep the two electrodes apart to prevent electrical short circuits while also allowing the transport of ionic charge carriers that are needed to close the circuit during the passage of current in an electrochemical cell.

Aluminium-ion batteries are a class of rechargeable battery in which aluminium ions serve as charge carriers. Aluminium can exchange three electrons per ion. This means that insertion of one Al3+ is equivalent to three Li+ ions. Thus, since the ionic radii of Al3+ (0.54 Å) and Li+ (0.76 Å) are similar, significantly higher numbers of electrons and Al3+ ions can be accepted by cathodes with little damage. Al has 50 times (23.5 megawatt-hours m-3) the energy density of Li and is even higher than coal.

Research in lithium-ion batteries has produced many proposed refinements of lithium-ion batteries. Areas of research interest have focused on improving energy density, safety, rate capability, cycle durability, flexibility, and cost.

<span class="mw-page-title-main">NASICON</span> Class of solid materials

NASICON is an acronym for sodium (Na) super ionic conductor, which usually refers to a family of solids with the chemical formula Na1+xZr2SixP3−xO12, 0 < x < 3. In a broader sense, it is also used for similar compounds where Na, Zr and/or Si are replaced by isovalent elements. NASICON compounds have high ionic conductivities, on the order of 10−3 S/cm, which rival those of liquid electrolytes. They are caused by hopping of Na ions among interstitial sites of the NASICON crystal lattice.

<span class="mw-page-title-main">Galvanic corrosion</span> Electrochemical process

Galvanic corrosion is an electrochemical process in which one metal corrodes preferentially when it is in electrical contact with another, in the presence of an electrolyte. A similar galvanic reaction is exploited in primary cells to generate a useful electrical voltage to power portable devices. This phenomenon is named after Italian physician Luigi Galvani (1737–1798).

<span class="mw-page-title-main">Electrochemical stripping analysis</span> Method of chemical analysis

Electrochemical stripping analysis is a set of analytical chemistry methods based on voltammetry or potentiometry that are used for quantitative determination of ions in solution. Stripping voltammetry have been employed for analysis of organic molecules as well as metal ions. Carbon paste, glassy carbon paste, and glassy carbon electrodes when modified are termed as chemically modified electrodes and have been employed for the analysis of organic and inorganic compounds.

Fluoride-ion batteries are rechargeable battery technology based on the shuttle of fluoride ions as ionic charge carriers.

References

  1. 1 2 3 4 5 R. Iyer, "Electrokinetic Remediation," Particulate Science and Technology: An International Journal, vol. 19, 2001, p. 219.
  2. 1 2 3 4 5 6 Wada, Shin-Ichiro; Umegaki, Yuki (2001). "Major Ion and Electrical Potential Distribution in Soil under Electrokinetic Remediation". Environmental Science & Technology. 35 (11): 2151–2155. Bibcode:2001EnST...35.2151W. doi:10.1021/es001335j. PMID   11414012.
  3. 1 2 Acar, Yalcin B.; Alshawabkeh, Akram N. (1993). "[10.1021/es00049a002 Principles of electrokinetic remediation]". Environmental Science & Technology. 27 (13): 2638–2647. doi:10.1021/es00049a002.
  4. 1 2 3 H.D. Sharma, Geoenvironmental Engineering: Site Remediation, Waste Containment, and Emerging Waste Management Technologies, Hoboken, N.J: Wiley, 2004.
  5. 1 2 3 4 Acar, Y.B.; Gale, R.J.; Alshawabkeh, A.N.; Marks, R.E.; Puppala, S.; Bricka, M.; Parker, R. (1995). "Electrokinetic remediation: Basics and technology status". Journal of Hazardous Materials. 40 (2): 117–137. Bibcode:1995JHzM...40..117A. doi:10.1016/0304-3894(94)00066-p.
  6. 1 2 3 4 5 6 Virkutyte, J.; Sillanpää, M.; Latostenmaa, P. (2002). "Electrokinetic soil remediation -- critical overview". The Science of the Total Environment. 289 (1–3): 97–121. Bibcode:2002ScTEn.289...97V. doi:10.1016/s0048-9697(01)01027-0. PMID   12049409.
  7. ↑ Baraud, F.; Tellier, S.; Astruc, M. (1997). "Ion velocity in soil solution during electrokinetic remediation". Journal of Hazardous Materials. 56 (3): 315–332. Bibcode:1997JHzM...56..315B. doi:10.1016/s0304-3894(97)00073-3.
  8. 1 2 Ho, S.V.; Sheridan, P.W.; Athmer, C.J.; Heitkamp, M.A.; Brackin, J.M.; Weber, D.; Brodsky, P.H. (1995). "Integrated In Situ Soil Remediation Technology: The Lasagna Process". Environmental Science & Technology. 29 (10): 2528–2534. Bibcode:1995EnST...29.2528H. doi:10.1021/es00010a011. PMID   22191951.
  9. 1 2 3 Ottosen, L.M.; Hansen, H.K.; Laursen, S.; Villumsen, A. (1997). "Electrodialytic Remediation of Soil Polluted with Copper from Wood Preservation Industry†". Environmental Science & Technology. 31 (6): 1711–1715. Bibcode:1997EnST...31.1711O. doi:10.1021/es9605883.
  10. ↑ Ho, S.V.; Athmer, C.; Sheridan, P.W.; Hughes, B.M.; Orth, R.; McKenzie, D.; Brodsky, P.H.; Shapiro, A.; Thornton, R.; Salvo, J.; Schultz, D.; Landis, R.; Griffith, R.; Shoemaker, S. (1999). "The Lasagna Technology for In Situ Soil Remediation. 1. Small Field Test". Environmental Science & Technology. 33 (7): 1086–1091. Bibcode:1999EnST...33.1086H. doi:10.1021/es980332s.
  11. ↑ Purkis, J.M.; Warwick, P.E.; Graham, J.; Hemming, S.D.; Cundy, A.B. (2021). "Towards the application of electrokinetic remediation for nuclear site decommissioning" (PDF). Journal of Hazardous Materials. 413: 125274. Bibcode:2021JHzM..41325274P. doi:10.1016/j.jhazmat.2021.125274. PMID   33609867. S2CID   231980091.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.