Emil (tank)

Last updated
Emil tank model EMIL-TANK-SWEDEN.jpg
Emil tank model

Emil, also known as the Kranvagn, KRV or Emil Olsson was a heavy tank developed secretly in Sweden during the early 1950s; Kranvagn, meaning mobile crane, was a cover-name. [1] The intention was to replace the Swedish Army's disparate tank fleet with a tank that could counter the Soviet IS series heavy tanks and be upgraded continuously. The initial design, in 1950, proposed mounting a 10.5 cm autoloader in an oscillating turret. [2] Due to its size, weight and power to weight it was considered by many to be more of a medium tank than a heavy tank.

Contents

The project was discontinued during development and only two chassis were built. They were later rebuilt and served as testing platforms for the Artillerikanonvagn 151 and Stridsvagn 103 projects. [3]

Project

At the end of World War II, it was clear that the mix of tanks in service in the Swedish Armed Forces was not just obsolete but also presented a large logistical problem. Kungliga Arméförvaltningens Tygavdelning (KAFT) conducted a study that concluded that the most cost-effective alternative would be to purchase the newly developed Centurion Mk 3, which while quite modern was judged to have upgrade potential for future requirements. A request of purchase was sent to the United Kingdom, but the reply was that no deliveries could be made before the needs of the British Army had been met first which was expected to take between five and 15 years. [4]

In 1951, the vehicle bureau of KAFT set about to develop an indigenous manufactured alternative, which they did in great secrecy under the guise of constructing a mobile crane. Parallel with this, negotiations were entered with France about buying the AMX-13 light tank. All this came to an abrupt halt when the British in early December 1952 offered to sell the desired Centurions immediately in order to earn needed foreign currency. The Swedish Minister for Defence, Torsten Nilsson, ended the debate about the future tank purchase by (on his own initiative) signing a deal with the British at the beginning of 1953 with the first Centurion deliveries taking place in April 1953. The delegation in France was forced to depart under heavy apologies while the EMIL-project was terminated.

A consortium of Landsverk, Bofors and Volvo suggested to revive it for the Försvarsbeslut 1958 (white paper of Swedish defence policies 1958) where the replacement for the now ageing Centurions were to be decided upon. EMIL was however regarded as too costly and instead the S-tank proposal was put forward for the final draft which it won and it subsequently became the Stridsvagn 103. [3] [5]

Construction

Testing of the German Panther and the French AMX 13 tanks in Sweden heavily influenced the initial 1951 design for the Emil project. The known documented statistics for the initial 1951 "EMIL" were to be as follows:

   Front – 180mm @ 45degs horizontal = 212mm eff          Cheek, front on – 125mm @ 35 deg vertical = 218mm eff          Cheek, side on – 125mm @ 80 deg horizontal = 127mm eff    Side – 30mm    Rear – 30mm
   UFP – 100mm @ 22 deg horizontal = 187mm eff    LFP – 125mm @ 38 deg horizontal = 203mm eff    Side – 20mm    Rear – 30mm

In 1952, the Emil project then progressed to be a counter for the Soviet IS-3 tank which influenced the shape of the hull while the oscillating turret was redesigned. The schematics for the three designs were split into four parts; frontal armor, side/rear armor, engine and armament. For the first studies and trials a chassis which resembled a low IS-7 was built. [3]

There were multiple armor thicknesses for both the front and the side which caused a variation in projected weight between the Emil 1, Emil 2 and Emil 3.

Turret Configurations:

Alt A

    Turret -          - 140mm @ 44 - 40 deg = 201mm - 217mm eff     Hull -          UFP - 75mm @ 25 deg = 177mm eff          LFP - 120mm @ 38 deg = 195mm eff

Alt B

    Turret          - 170mm @ 44 - 40 deg = 244mm - 264mm eff     Hull          UFP - 95mm @ 25 deg = 224mm eff          LFP - 145mm @ 38 deg = 235mm eff

Side turret/side hull/Rear Configuration

    1: 40/20/30     2: 60/30/30     3: 80/40/40

Two main options were considered for armament:

The ammunition feed regardless of gun was planned to be a dual-drum autoloader allowing for quick selection of ordnance (armor-piercing or high explosive). A new prototype ammunition was tested, which was to be a combination of HEAT and APDS. In case of failure, a back up armament was chosen: a 105 mm calibre rifled gun ~L/67

Each design was to have a different engine;

During testing of the 12cyl AV-1790 engine on the built Kranvagn hull it was discovered that after sending power to the cooling and other equipment the engine was only sending 723 hp to the drive wheel.

There were a total of 6 variations per Emil plan for a total of 18 variations. Weight varied between 30.7t for the Emil I A1 to 41.8t for the Emil III B3. Ultimately the Emil III B3 was the preferred option. The turret side armor (80mm) and rear armor (40mm) was to be dropped to 70mm at the side and 30mm at the rear to improve gun stability as well as gun elevation. [6] [7]

Related Research Articles

<span class="mw-page-title-main">Stridsvagn 103</span> Amphibious turretless main battle tank

The Stridsvagn 103, also known as the Alternative S and S-tank, is a Swedish post-World War II main battle tank, designed and manufactured in Sweden. "Strv" is the Swedish military abbreviation of stridsvagn, Swedish for chariot and tank, while the 103 comes from being the third tank in Swedish service to be equipped with a 10 cm gun.

<span class="mw-page-title-main">Centurion (tank)</span> British main battle tank

The Centurion was the primary British Army main battle tank of the post-World War II period. Introduced in 1945, it is widely considered to be one of the most successful post-war tank designs, remaining in production into the 1960s, and seeing combat into the 1980s. The chassis was adapted for several other roles, and these variants have remained in service. It was a very popular tank with good armour, manoeuvrability, and armament.

<span class="mw-page-title-main">Type 96 tank</span> Chinese main battle tank

The Type 96 or ZTZ96 is a Chinese second generation main battle tank (MBT). The final evolution of the Type 88 design, the Type 96 entered service with the People's Liberation Army (PLA) in 1997. The later variants of the Type 96 are currently in PLA service together with China's third generation MBT, the Type 99.

<span class="mw-page-title-main">Chieftain (tank)</span> Main battle tank

The FV4201 Chieftain was the main battle tank of the United Kingdom during the 1960s–1990s.

<span class="mw-page-title-main">Black Eagle (tank)</span> Main battle tank

The Black Eagle tank or Object 640 was a presumed prototype main battle tank produced in the Russian Federation. Being based upon the T-80U, it was developed by the KBTM design bureau of Omsktransmash in the late 1990s. The Black Eagle has been cancelled, with all production and development halted in 2009.

An autoloader or auto-loader is a mechanical aid or replacement for the personnel that load ordnance into crew-served weapons without being an integrated part of the gun itself. The term is generally only applied to larger weapons, such as naval weapons, tanks, and artillery; that would otherwise have a dedicated person or persons loading them.

<span class="mw-page-title-main">P26/40 tank</span> Heavy tank

The P 26/40 was an Italian World War II heavy tank. It was armed with a 75 mm gun and an 8 mm Breda machine gun, plus another optional machine gun in an anti-aircraft mount. Design had started in 1940 but very few had been built by the time Italy signed the armistice with the Allies in September 1943 and the few produced afterwards were used by the Germans.

<span class="mw-page-title-main">M-95 Degman</span> Prototype Croatian main battle tank

The M-95 Degman is a prototype Croatian main battle tank, developed in 2003 by the Đuro Đaković company and is largely based on the older M-91 Vihor tank that was based in the M-84 tank. The Đuro Đaković factory is best known for its principal role in the production of the M-84 in the Yugoslav era.

<span class="mw-page-title-main">Infanterikanonvagn 91</span> Amphibious assault gun

The Infanterikanonvagn 91, Ikv 91, was a high mobility assault gun that was developed to meet the operational requirements of the Swedish Army. It was designed and manufactured by Hägglund and Söner and employed common components with the Pbv 302 armoured personnel carrier series. The first prototypes of the Ikv 91 were completed in 1969 with production running from 1975 until 1978. The total numbers manufactured were 212.

<span class="mw-page-title-main">T29 Heavy Tank</span> American heavy tank

The Heavy Tank T29 was an American heavy tank project started in March 1944 to counter the appearance of the German Tiger II heavy tank. The T29 was not ready in time for the war in Europe, but it did provide post-war engineers with opportunities for applying engineering concepts to artillery and automotive components.

<span class="mw-page-title-main">Type 5 Chi-Ri medium tank</span> Medium tank

The Type 5 medium tank Chi-Ri was a medium tank developed by the Imperial Japanese Army in World War II. It was intended to be a heavier, more powerful version of Japan's prototype Type 4 Chi-To medium tank. Only one incomplete prototype was built.

<span class="mw-page-title-main">AMX-50</span> Medium Tank/heavy tank (lowered variant)

The AMX 50 or AMX-50 was a French heavy tank designed in the immediate post Second World War period. It was proposed as, in succession, the French medium, heavy, and main battle tank, incorporating many advanced features. It was cancelled in the late 1950s however, due to unfavourable economic and political circumstances after serious delays in development.

The Egyptian Infantry Fighting Vehicle (EIFV), also known as Infantry Fighting Vehicle Light (IFVL), is an Egyptian modification of the M113. It is a hybrid, based on an enlarged M113 chassis equipped with the complete two-man power-operated turret of the M2 Bradley IFV. The EIFV never entered production for Egyptian Army.

<span class="mw-page-title-main">Oscillating turret</span> Two-part gun turret with elevation hinge

An oscillating turret is a form of turret for armoured fighting vehicles, both tanks and armoured cars. The turret is unusual in being made of two hinged parts. Elevation of the gun relies on the upper part of the turret moving relative to the lower part.

<span class="mw-page-title-main">Tiger I</span> German WWII heavy tank

The Tiger I was a German heavy tank of World War II that operated beginning in 1942 in Africa and in the Soviet Union, usually in independent heavy tank battalions. It gave the German Army its first armoured fighting vehicle that mounted the 8.8 cm KwK 36 gun. 1,347 were built between August 1942 and August 1944. After August 1944, production of the Tiger I was phased out in favour of the Tiger II.

The 44M Tas was a Hungarian medium tank, in earlier Hungarian knowledge classified as a heavy tank design of World War II. It was developed to combat heavily armored Soviet tanks encountered on the Eastern Front and to replace the older Turán I and Turán II tanks which Hungary operated, modernising Hungary's armoured forces. The Tas somewhat resembled the German Panther tank in terms of both looks and capabilities. It was to be well armored – up to 120 mm thick and with sloped armor. The main armament would likely have been a Hungarian built heavily modified anti-tank version of the 80 mm Bofors AA gun. The only prototypes built were destroyed when the Americans bombed the Manfred Weiss factory in July 1944.

<span class="mw-page-title-main">T69 (tank)</span> Medium tank

The T69 was a prototype American medium tank with an oscillating turret mounting a 90mm cannon with an eight-round drum autoloader. It held a crew of three. Developed on the basis of the T42 experimental medium tank in mid-50s, the vehicle never entered mass production.

<span class="mw-page-title-main">T57 heavy tank</span> Heavy tank

The T57 heavy tank was an experimental heavy tank developed by the American military during the Cold War era as a further development of the M103 heavy tank. Featuring heavy armor and a long range 120 mm rifled gun, the T57 was supposed to serve as a replacement to the M103 in service with American heavy tank units in Europe. Armor on the hull front was to range between 5-8 in (127-203 mm) in thickness and the turret was to be 5.98 in (152 mm) at maximum on all sides. Like the French AMX 50 project, it was to feature an oscillating turret and was also to receive a 153 mm gun. Experiments were also conducted to investigate mounting a 203 mm gun, but this was soon found to be infeasible. When multiple problems were discovered in the turret oscillation system on account of the excess weight of the heavily armored turret and the gun, the project was dropped.

<span class="mw-page-title-main">Tanks of Sweden</span>

This article deals with the history and development of tanks employed by the military of Sweden, from the interwar period, and World War II, the Cold War and modern era.

The AMX 40 was a proposed French cruiser tank. It was intended to replace the SOMUA S35 and S40 tanks. The tank never went beyond design stage after the Fall of France.

References

  1. "EMIL". 18 February 2016. Archived from the original on 18 February 2016. Retrieved 20 February 2018.
  2. http://sv.wikisource.org/wiki/Projekt_E_M_I_L [ dead link ]
  3. 1 2 3 "Project EMIL: a summary – Swedish tank archives". tanks.mod16.org. Retrieved 20 February 2018.
  4. "Historien bakom Strv 103 "S"". www.ointres.se. Retrieved 20 February 2018.
  5. "The beginnings of project EMIL – Swedish tank archives". tanks.mod16.org. Retrieved 20 February 2018.
  6. "Swedish Tanks – Part XII: EMIL 1951 - For the Record". ftr.wot-news.com. Retrieved 20 February 2018.
  7. "Swedish Tanks – Part XIII: EMIL 1952-1958 | for the Record".