Vickers MBT

Last updated

Vickers MBT Mk. 1
AB133 - Vijayanta MBT.JPG
Vijayanta MBT, a variant of the Vickers Mk. 1
Type Main battle tank
Place of origin United Kingdom
Service history
In service1965–2008
Used bySee Operators
Wars Indo-Pakistani War of 1965
Indo-Pakistani War of 1971
Iraqi invasion of Kuwait
2019 India–Pakistan standoff
Production history
DesignerVickers
Manufacturer Vickers Defence Systems
Produced1964–1994
Specifications
Mass38 t (42 short tons)
Length9.73 m (31 ft 11 in) overall gun forward
Width3.17 m (10 ft 5 in)
Height2.44 m (8 ft 0 in)
Crew4

Armour Gun mantlet : 80 mm
Turret front: 60 mm
Turret sides: 40 mm
Glacis: 60 mm
Lower hull front: 80 mm
Hull sides: 30 mm
Main
armament
1 x 105 mm L7A1 gun (44 rounds)
Secondary
armament
1 x 12.7 mm L6A1 ranging machine gun with 700 rounds
1 x 7.62 mm MG (pintle mount) with 1,300 rounds
1 x 7.62 mm MG (coax) with 1,300 rounds
Engine Leyland L60 (multi-fuel 2-stroke opposed-piston compression-ignition)
535 hp (399 kW) 6 cyl, 19 litres
Power/weight13.79 bhp/t
TransmissionMerrit-Wilson TN-12 (6 fwd / 2 rev) with a triple differential steering system
Suspension Torsion bars
Operational
range
480 km (300 miles) on roads
Maximum speed Road: 48 km/h (30 mph)
Off road: 30 km/h (19 mph)

The Vickers MBT is a series of main battle tanks (MBTs) developed as a private venture by British company Vickers-Armstrongs for export. The design makes use of proven components, such as the L7 gun of the Centurion, the Leyland L60 multi-fuel engine, the transmission and fire control system of the Chieftain. Many copied tanks were also built by India under licence as the Vijayanta.

Contents

Design and development

The Vickers MBT followed on from a 24-tonne 20-pdr gunned tank design intended for export. [1] This would be as well equipped as a Centurion but substantially cheaper and with eight Vickers Vigilant anti-tank missiles it would be as effective. However, with the introduction of the 105 mm L7 gun into the British, US and German tank designs, this light tank would have been less powerful while too large for the reconnaissance role, and so a new design was required. With armour twice that of the light tank design, it would still be 12 tonnes lighter than Centurion and hence more mobile. The design would use the new engine and transmission of the Chieftain tank then being developed. The development coincided with an agreement with India in 1961 to produce a tank design and help set up a factory there to produce it.

The Vickers MBT Mk 1 was designed to be a simple, low-cost, but effective tank. [2] The first prototype was completed in 1963. [2] In 1964, one of the prototypes was sent to India.

The Vickers was made of welded rolled homogeneous armour plates. It weighed 38,600 kg, carried a 105 mm gun with 44 rounds and had a top speed of 48 km/h. [2] 70 tanks were sold to Kuwait and many of a modified version were made in India where the tank was called Vijayanta. [2]

Versions

Other developments

Vickers Main Battle Tank Mark 2

The 1968 proposal for a vehicle specification that differed from the Mark 1 in the following respects:

  1. Transistorised gun-control equipment.
  2. New turret of cast front and mantlet-less design, with new gun mounting.
  3. Improved frontal aspect to the hull and turret.
  4. Improved track, suitable for 56 km/h (35 mph) continuously.
  5. Reduced ground pressure due to reduced total weight, increased track width and increased track on the ground by moving two (or three) rear wheel stations backwards (made possible by the change to a General Motors engine).
  6. Engine delivering full horsepower as for the Chieftain through redesigned final drives to give 56+ km/h (made possible by the General Motors engine's potential for uprating).
  7. Improved commander cupola to take the Chieftain vision devices.
  8. Provision for fitting four Swingfire wire-controlled anti-tank missiles (intended as a response to weapons of greater range, such as the 120 mm L11 tank gun.

The Mark 2 did not proceed beyond a mock-up although a Vickers Mark 1 MBT with four Swingfire missiles, two mounted either side of the turret towards the rear, was shown at Farnborough. A note in Vickers's files dated from 20 November 1970 explains the probable reason: "Guided missiles have an inherent disadvantage in that is almost impossible to fire them from under armour since the rocket motor efflux presents a serious problem. Generally speaking, the best that can be achieved is to put the crew under armour and mount the missiles externally. This presents reloading problems and leaves the missiles vulnerable to small arms and mortar fire."[ citation needed ]

In any case, only four spare missile rounds could be carried. [3]

Vickers Main Battle Tank Mark 3

Silhouette of Kenyan troops on top of a Vickers Mark 3 outside of Kismayo, Somalia in 2012 AMISOM forces in Saa'moja outside Kismayo 14 (8049898219).jpg
Silhouette of Kenyan troops on top of a Vickers Mark 3 outside of Kismayo, Somalia in 2012

The Mk. 3 was introduced in 1975 [4] for the export market. It was the last of the Vickers tanks to see sales in numbers abroad. In 1974, Vickers pressed on with development of a Mark 3 version. This stems from Design No. 51400 T and differs from the Mark 1 mainly in having a turret with a well-shaped cast front welded to a fabricated armour plate body. It also has a cast gun mantlet which is better shaped from the point of view of its resistance to armour-piercing projectiles than the flat mantlet of the Mark. 1. [5] The Mark 3 embodies various other improvements, such as an increase in the depression of its main gun from -7 to -10 degrees below the horizontal and an increase in the ammunition from 44 to 50 rounds. The first production order for Mk. 3 tanks was placed in 1977 by the Government of Kenya

Vickers Main Battle Tank Mark 4 (Valiant)

In 1977, Vickers produced a design for a vehicle that incorporated Chobham composite armour protection within a battle weight of 43 tonnes. This first prototype, designated the Vickers Main Battle Tank Mark 4.

Vickers Main Battle Tank Mark 7

The Vickers Mk 7 consisted of a third generation Vickers Valiant turret mounted on a Krauss-Maffei-supplied chassis that in the prototype is essentially that of the Leopard 2 MBT. The tank had a Marconi digital fire control system, an SFIM panoramic sight and a Philips 2nd Gen thermal imager. [6] The Mark 7 has three features that reduces the likelihood of its detection by night sights and other heat-sensing devices. These are its coat of infra-red reflective paint; the mixing of the hot exhaust gases with the cooling air before discharge; and a new design of thermal sleeve. [3]

Vickers Anti-aircraft Tank

Equipped with the Marksman turret, [7] as well as a self-propelled 155mm howitzer with the GBT 155 turret. [8] The GBT 155 was unveiled in 1982 and was armed with the same 155mm ordnance as the AS-90. It was designed primarily for existing tank chassis. [9]

Operators

Operators
.mw-parser-output .legend{page-break-inside:avoid;break-inside:avoid-column}.mw-parser-output .legend-color{display:inline-block;min-width:1.25em;height:1.25em;line-height:1.25;margin:1px 0;text-align:center;border:1px solid black;background-color:transparent;color:black}.mw-parser-output .legend-text{}
Current
Former Vickers MBT users.png
Operators
  Current
  Former

Current operators

Former operators

See also

Related Research Articles

<span class="mw-page-title-main">Churchill tank</span> British heavy infantry tank

The Tank, Infantry, Mk IV (A22) Churchill was a British infantry tank used in the Second World War, best known for its heavy armour, large longitudinal chassis with all-around tracks with multiple bogies, its ability to climb steep slopes, and its use as the basis of many specialist vehicles. It was one of the heaviest Allied tanks of the war.

<span class="mw-page-title-main">Centurion (tank)</span> British main battle tank

The FV4007 Centurion was the primary British Army main battle tank of the post-World War II period. Introduced in 1945, it is widely considered to be one of the most successful post-war tank designs, remaining in production into the 1960s, and seeing combat into the 1980s. The chassis was adapted for several other roles, and these variants have remained in service. It was a very popular tank with good armour, mobility, and a powerful main armament.

<span class="mw-page-title-main">Arjun (tank)</span> Main battle tank

The Arjun is a third generation main battle tank developed by the Combat Vehicles Research and Development Establishment (CVRDE) of the Defence Research and Development Organisation (DRDO), for the Indian Army. The tank is named after Arjuna, the archer prince who is the main protagonist of the Indian epic poem Mahabharata. Design work began in 1986 and was finished in 1996. The Arjun main battle tank entered service with the Indian Army in 2004. The 43rd Armoured Regiment, formed in 2009, was the first regiment to receive the Arjun.

<span class="mw-page-title-main">AMX-30</span> 1966 French main battle tank

The AMX-30 is a main battle tank designed by Ateliers de construction d'Issy-les-Moulineaux and first delivered to the French Army in August 1966. The first five tanks were issued to the 501st Régiment de Chars de Combat in August of that year. The production version of the AMX-30B weighed 36 metric tons, and sacrificed protection for increased mobility. The French believed that it would have required too much armour to protect against the latest anti-tank threats, thereby reducing the tank's maneuverability. Protection, instead, was provided by the speed and the compact dimensions of the vehicle, including a height of 2.28 metres. It had a 105 mm gun, firing a then advanced high-explosive anti-tank (HEAT) warhead known as the Obus G. The Obus G used an outer shell, separated from the main charge by ball bearings, to allow the round to be spin stabilized by the gun without spinning the warhead inside which would disrupt jet formation. Mobility was provided by the 720 horsepower (540 kW) HS-110 diesel engine, although the troublesome transmission adversely affected the tank's performance.

<span class="mw-page-title-main">Challenger 1</span> UK main battle tank

The FV4030/4 Challenger 1 is a British main battle tank (MBT) used by the British Army from 1983 to 2001, when it was superseded by the Challenger 2. The majority of the Challenger 1 fleet was subsequently sold to Jordan where it remained in service with the Royal Jordanian Army until withdrawals were announced in 2018. Known locally as Al-Hussein, these vehicles received various Jordanian modifications before being replaced by French-made Leclerc tanks from the UAE and ex-Italian B1 Centauro 8x8 wheeled tank destroyers. The Jordanian Challenger 1 fleet had been retired by January 2023.

<span class="mw-page-title-main">Chieftain (tank)</span> Main battle tank

The FV4201 Chieftain was the main battle tank (MBT) of the United Kingdom from the 1960s into 1990s. When introduced, it was among the most heavily armed MBTs of the era, mounting a 120 mm Royal Ordnance L11 gun, the equal of the much larger specialist heavy tanks then in service. It also was among the most heavily armoured, with up to 195 mm (7.7 in) that was highly sloped to offer 388 mm (15.3 in) thickness along the line of sight.

<span class="mw-page-title-main">Conqueror (tank)</span> British heavy tank

The FV 214 Conqueror, also known as tank, heavy No. 1, 120 mm gun, Conqueror was a British heavy tank of the post-World War II era. It was developed as a response to the Soviet IS-3 heavy tank. The Conqueror's main armament, an L1 120 mm gun, was larger than the 20-pounder (83.4 mm) gun carried by its peer, the Centurion. The Conqueror's role was to provide long range anti-tank support for the Centurion. Nine Conquerors were issued for each regiment in Germany, usually grouped in three tank troops. In the British Army both the Conqueror and the Centurion were replaced by the Chieftain.

Tank development both evolved considerably from World War II and played a key role during the Cold War (1945–1990). The period pitted the nations of the Eastern Bloc and the North Atlantic Treaty Organization (NATO) against each other.

<i>Vijayanta</i> Main battle tank

The Vijayanta was a main battle tank built in India based on a licensed design of the Vickers Mk.1. The Vijayanta was the first indigenous tank of the Indian Army.

<span class="mw-page-title-main">Main battle tank</span> Tank designed for all primary combat roles

A main battle tank (MBT), also known as a battle tank or universal tank, is a tank that fills the role of armour-protected direct fire and maneuver in many modern armies. Cold War-era development of more powerful engines, better suspension systems and lighter composite armour allowed for the design of a tank that had the firepower of a super-heavy tank, the armour protection of a heavy tank, and the mobility of a light tank, in a package with the weight of a medium tank. The first designated MBT was the British Chieftain tank, which during its development in the 1950s was re-designed as an MBT. Throughout the 1960s and 1970s, the MBT replaced almost all other types of tanks, leaving only some specialist roles to be filled by lighter designs or other types of armoured fighting vehicles.

<span class="mw-page-title-main">Tanks in the British Army</span> Evolution of British tanks

This article on military tanks deals with the history and development of tanks of the British Army from their first use in the First World War, the interwar period, during the Second World War, the Cold War and modern era.

<span class="mw-page-title-main">MBT-80</span> British military tank

The FV4601 MBT-80 was a British experimental third-generation main battle tank, designed in the late 1970s to replace the Chieftain tank. It was eventually cancelled in favour of the Challenger 1, itself an evolution of the Chieftain design.

<span class="mw-page-title-main">Leyland L60</span> Reciprocating internal combustion engine

The Leyland L60 was a British 19-litre (1,200 cu in) vertical six-cylinder opposed-piston two-stroke multi-fuel diesel engine designed by Leyland Motors in the late 1950s/early 1960s for the Chieftain main battle tank (MBT). The engine was also used in the Vickers MBT and its Indian-built derivative, the Vijayanta.

The Vickers Main Battle Tank Mk. 4 later known as the Vickers Valiant was a main battle tank developed as a private venture by British company Vickers for export. Its development began in 1976 and ended in January 1984. Although the Valiant did not enter production, its development provided valuable experience in the production of an aluminium-hulled, Chobham-armoured tank in the 40 tonnes weight range. A further development of its turret was later used for the Vickers Mk. 7 MBT.

<span class="mw-page-title-main">Vickers MBT Mark 3</span> Main battle tank

The Vickers Main Battle Tank Mk. 3 is a main battle tank by Vickers, a development of the Vickers MBT, and introduced in 1975 for the export market. It was the last of the Vickers tanks to see sales in numbers abroad.

<span class="mw-page-title-main">FV4202</span> Technology test bed

The Tank Medium No. 2 Experimental Vehicle FV4202 also known as the 40-ton Centurion was a technology test bed developed by British company Leyland Motors between 1955 and 1956. It was used to develop various concepts later used in the Chieftain main battle tank.

The Vickers Main Battle Tank Mark 7 was a main battle tank developed on the basis of a joint venture between Vickers Defence Systems in the United Kingdom and Krauss-Maffei of Germany. It combined the Leopard 2 chassis with the Universal Turret previously developed for the Vickers Valiant main battle tank. The Vickers Mk. 7 was a key milestone in the development of the Challenger 2 as many of the features developed and successfully demonstrated in the turret of the Vickers Mk. 7 were later incorporated into the Challenger 2.

References

  1. Ogorkiewicz, R M (1973). Vickers Battle Tank, Profile Publications, August 1973.
  2. 1 2 3 4 Gelbart, Marsh (1996). Tanks main battle and light tanks. Brassey’s UK Ltd. p. 108. ISBN   1-85753-168-X.
  3. 1 2 3 Foss, Christopher F.; McKenzie, Peter (1988). The Vickers Tanks: From Landship to Challenger. Patrick Stephens Limited. p. 256. ISBN   9781852601416.
  4. Lüdeke, Alexander (2018). International Tank Developments from 1970. Pen and Sword Military. p. 128. ISBN   978-1473891418.
  5. Ogorkiewicz, R. M. (September 1973). AFV Weapons Profile. Duncan Crow. p. 21.
  6. International Defence Equipment Catalogue 1988–1989 Volume II
  7. 1 2 3 4 5 Jane's Armour and Artillery 2003–2004
  8. Tanks of the World (1990) ISBN   3-7637-5871-2
  9. Jane's Armour and Artillery 1993–1994
  10. "Former Equipment of Iraqi Army". Archive.org. p. [ page needed ]. Retrieved 17 July 2018.
  11. "SPECIAL REPORT: Inside Boko Haram's routes of death, destruction and humanitarian crises". premiumtimesng.com. 24 October 2015. Retrieved 21 May 2022.
  12. "Nigerian troops destroy Boko Haram tactical ground, recover battle tank, others". premiumtimesng.com. 1 February 2018. Retrieved 21 May 2022.
  13. "Troops Recover Battle Tanks From Boko Haram". channelstv.com. 31 January 2018. Retrieved 21 May 2022.

Sources