Europa XS series | |
---|---|
General information | |
Type | Kit aircraft |
National origin | United Kingdom |
Manufacturer | Europa Aircraft |
Designer | Ivan Shaw [1] |
Number built | 495 by 2011 [2] |
History | |
Manufactured | 1994 [3] -present |
First flight | 12 September 1992 [3] |
Variants | Liberty XL2 |
The Europa XS and Europa Classic are a family of British composite two-place low-wing monoplane kit aircraft. Designed by Ivan Shaw, the Europa was introduced in the early 1990s. Europas are manufactured by Europa Aircraft and supplied as kits for amateur construction. More than 450 Europas have been completed.
The Europa was conceived as a modern kit aircraft for personal use within Europe. Its design aims were: high speed, low cost, able to be built and stored at home, easily transportable on a trailer, using Mogas fuel, able to be rigged for flight in under five minutes, carrying two people in comfort, and providing sufficient baggage for extended touring. Apart from "low cost", these objectives were largely met. [4]
Ivan Shaw's design work on the Europa, as it was initially named, began in January 1990. The first prototype, G-YURO, first flew on 12 September 1992 and Popular Flying Association certification was gained in May 1993. Most Europas have been sold in kit form, although five factory-assembled aircraft were produced between 1994 and 1996. The first kit-built aircraft to be completed flew on 14 October 1995. [3] By the autumn of 2007 450 Europas of all types had been completed and were flying. [5]
The basic design was later developed by Ivan Shaw into a United States FAR certified aircraft, built by Liberty Aerospace in the US as the Liberty XL2.
The Europa is classified as a homebuilt in its home country of the UK and qualifies for a Permit to Fly. This limits it to day and VFR flight. Previous restrictions of flying over built up areas were removed during 2008. In Canada the Europa is an amateur-built aircraft and qualifies for a Special Certificate of Airworthiness. [6]
In 1997 UK Prime Minister Tony Blair launched the Millennium Products competition to promote British industry in the 21st century. [7] This culminated in 1999 with a winners list of 1012 manufacturers and their products. One of these was the Europa XS, described as "A light aircraft which offers speed, economy and performance and can be stored on a trailer in your garage." [8]
Europas are flown in Europe in the very light aircraft category. In the United States the Europa XS is currently awaiting light-sport aircraft certification and as of April 2017 the design does not appear on the Federal Aviation Administration's list of approved special light-sport aircraft. [9] [10]
The streamlined composite design and the particularly low canopy give the Europa both high cruise speeds of 200 mph (320 km/h) and fuel efficiency of 50 mpg‑imp (5.6 L/100 km) due to its low drag. [11] The Europa can be fitted with Rotax 912UL of 80 hp (60 kW), the 100 hp (75 kW) Rotax 912ULS or the turbocharged 115 hp (86 kW) Rotax 914 engine. [11]
In the early stages of development, Shaw had proposed powering the Europa with a British-made MidWest twin-rotor wankel 110bhp engine which was lightweight, powerful, compact and very smooth. However Shaw became dissatisfied by its somewhat crude Tillotson carburettors. Eventually, a sophisticated TR7-derived fuel-injection system became available for the MidWest engine, but by this time Shaw's choice of a Rotax flat-four for the Europa was fixed. (Shaw had earlier built a Rutan "Twin-EZ", a canard kitplane with twin Norton Wankel engines). [12]
Europas first became available with a monowheel landing gear and a tailwheel. The wings had small castors on outriggers that were lowered with the flaps. [11] Shaw chose the monowheel configuration for its perceived advantages of reduced weight and improved performance over a tricycle configuration. In practice, the monowheel Europa proved tricky in inexperienced hands and could be prone to prop-strikes and groundlooping (partly due to the lack of differential braking) so the company developed a tricycle undercarriage which has become the more popular version, particularly as any performance disadvantage has been slight.
Europas can be fitted with either normal (tourer) wings made out of fiberglass, with 102 sq ft (9.5 m2) wing area and 13.43 lb/ft2 wing loading at MTOW, or motorglider wings, made from carbon fiber with a greater span. Since the fuselage is common to both motorglider and tourer then with both sets of wings the same fuselage can be configured as a tourer and a motorglider alternately. The wings can be removed for transportation or storage in five minutes. [11]
The Europa touring wing uses a unique Dykins 12% thickness/chord ratio airfoil designed by Don Dykins, who had been deputy Chief Aerodynamicist at Hawker Siddeley Aviation, and later technical director of British Aerospace and chief aerodynamicist on the European Airbus. [13]
The motorglider wing uses a different wing section, also designed by Dykins, with its center of pressure coincident with that of the smaller wing to ensure that the rudder and tailplane are equally effective with either. Wingspan is increased to 42 feet (13 m) bringing the wing area to 135 sq ft (12.5 m2). The motorglider wings are fitted with airbrakes rather than flaps. [14]
Development is also under way for wings suitable for a light-sport aircraft variant of Europa XS. [15]
The fuel tanks are located in the fuselage and have a capacity of 18 U.S. gallons (68 L; 15 imp gal) standard and 28 U.S. gallons (110 L; 23 imp gal) optional. This gives a range of 841 mi (1,353 km) standard or 1,256 mi (2,021 km) extended at economy cruise setting. [11] The plane can use AVGAS or MOGAS depending on engine requirements and national regulations. It is also possible to upgrade fuel capacity with the addition of extra fuel tanks.
On 1 June 2007 a Europa Classic, registration G-HOFC, broke up during a flight over South Wales, United Kingdom, killing both occupants. The investigation indicated irregularities in the construction of the right wing attachment at the rear lift/drag pin. There was also evidence of movement of the tailplane surfaces beyond the normal range of movement.
As a result of the initial findings, the Light Aircraft Association released two Airworthiness Bulletins requiring immediate and repetitive inspections: [26]
The content of these Airworthiness Bulletins was made mandatory in the UK by the issue of Mandatory Permit Directives. The final accident report concludes that these modifications and the mandated inspections of aircraft already completed, adequately address the construction issue. [27] This accident affects only Europa Classics, all of which should have now been modified, and not the XS model which has a different structure.
Data from Jane's All The World's Aircraft 2003–2004 [30]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Van's RV-12 is an American two-seat, single-engine, low-wing homebuilt airplane eligible for the U.S. E-LSA category, sold in kit form and as a complete ready-to-fly aircraft by Van's Aircraft of Aurora, Oregon.
The Liberty XL2 is a two-seat, low-wing, general aviation aircraft manufactured from 2004–2011 by Liberty Aerospace of Melbourne, Florida. A derivative of the Europa XS kit plane, it serves both as a touring aircraft for private flyers and as a flight trainer.
The CSA SportCruiser is a two-seat, single engine, tricycle undercarriage, fixed-wing aircraft that was introduced in 2006 by Czech Aircraft Works (CZAW), now named Czech Sport Aircraft.
The ISON Airbike and Tandem Airbike are a family of American high-wing, tractor configuration ultralight aircraft, that were available in kit form. The single-seat Airbike was introduced in 1994 and the two-seat Tandem Airbike was unveiled in 1996.
The Murphy JDM-8 is a Canadian single-seat ultralight monoplane designed by Daryl Murphy. The type was intended to be sold as a kit for home construction by Murphy Aircraft of Chilliwack, British Columbia.
The Murphy Renegade is a family of Canadian two-seats-in-tandem, single engine, conventional landing gear, biplanes, produced by Murphy Aircraft and intended for amateur construction.
The Sorrell Hiperlight is a family of single and two seat, negative stagger biplanes, designed for amateur construction.
The Ultravia Pelican is the name given to two series of high-wing, single-engine, tractor configuration ultralight aircraft that were designed by Jean Rene Lepage and produced in kit form for amateur construction by Ultravia Aero International of Mascouche, Quebec and later Gatineau, Quebec.
The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.
The Rans S-19 Venterra is an American single-engined, tractor configuration, two-seats in side-by-side configuration, low-wing monoplane designed by Randy Schlitter as a light-sport aircraft and manufactured by Rans Inc. The Venterra is available as a complete factory-built aircraft and in kit form for amateur construction.
The Breezer is a low-wing, single-engine ultralight aircraft, seating two side by side. Designed and built in Germany, it meets both European and US light-sport aircraft requirements and has been in production since 2001.
The Rocky Mountain Wings Ridge Runner is a family of American high wing, strut-braced, single engine, conventional landing gear aircraft that were designed by Stace Schrader and were produced by Rocky Mountain Wings of Nampa, Idaho for amateur construction from 2000 to 2018.
The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.
The Bailey-Moyes Dragonfly is an Australian-American two-seats-in-tandem, high-wing, strut-braced, open cockpit, conventional landing gear-equipped ultralight aircraft. The aircraft has been in production since 1990 and was designed as a special-purpose tug for hang gliders and ultralight sailplanes. It is available as a complete aircraft or as a kit for amateur construction. The aircraft has been variously produced by Moyes Microlights, Bailey-Moyes Microlights and currently LiteFlite of Botany, New South Wales, all different iterations of the same company.
The Avid Flyer is a family of American single engine, high-wing, strut-braced, conventional landing gear-equipped, two seat light aircraft designed for kit construction in the 1980s. Its several variants sold in large numbers. In 1987 a Flyer became the first ultralight to land at the North Pole.
The US Aviation Cumulus is an American low-wing, single-seat, open cockpit motor glider that was designed by Dave Ekstrom and produced by US Aviation, supplied in kit form for amateur construction.
The Sam Aircraft Sam LS is a Canadian aircraft design, designed and produced by Sam Aircraft, formerly known as Haim Aviation of Lachute, Quebec. The aircraft was designed for the Canadian AULA and American light-sport aircraft rules and had its first flight on 26 February 2013.
The Pegazair-100 STOL is a two-seat STOL homebuilt aircraft developed in Canada by Tapanee Aviation, Inc. of Mont-Saint-Michel, Quebec.
The Just SuperSTOL is an American STOL amateur-built aircraft, designed and produced by Just Aircraft of Walhalla, South Carolina. The aircraft is supplied as a kit for amateur construction.
The Tecnam Snap is an Italian aerobatic ultralight aircraft, designed by Fabio Russo and produced by Tecnam of Casoria, Metropolitan City of Naples, introduced at the AERO Friedrichshafen show in 2013. The aircraft was intended to be supplied complete and ready-to-fly.
{{cite web}}
: CS1 maint: numeric names: authors list (link)