P-16 | |
---|---|
![]() | |
Role | Fighter |
National origin | Switzerland |
Manufacturer | Flug- und Fahrzeugwerke Altenrhein (FFA) |
First flight | 25 April 1955 |
Status | Cancelled |
Number built | 5 |
The FFA P-16 was a Swiss prototype ground attack jet fighter designed and produced by aircraft manufacturer Flug- und Fahrzeugwerke Altenrhein (FFA). It was Switzerland's second attempt to develop a domestically designed and manufactured jet fighter, following the EFW N-20.
Work on what would become the P-16 commenced during the late 1940s. From the onset, the company intended for the indigenously developed fighter to replace several piston-engined aircraft that were then in service with the Swiss Air Force. During 1952, a pair of prototypes were ordered from FFA. On 25 April 1955, the first prototype performed its maiden flight. On 15 August 1956, the second prototype exceeded the sound barrier for the first time. The flight test programme demonstrated the P-16 to be capable of achieving favourable performance; accordingly, a production contract for 100 aircraft was issued by the Swiss Government.
In the aftermath of a pre-production aircraft's crash, the Swiss production order was terminated and soon thereafter replaced by orders for the British-built Hawker Hunter. This cancellation had come before any production P-16s had been completed. While the company continued the program independently for a time, completing a further two aircraft, no buyers could be found for the type. The P-16s were examined by Bill Lear, who later developed the highly successful Learjet family of business jets. However, the P-16 was never introduced into service by any operator, and only a single example of the type remains presently.
Following the end of the European portion of the Second World War, Switzerland was one of several nations who used the new-found peacetime to modernise and expand its industrial and military capabilities. [1] At the time of the war's conclusion, the Swiss Air Force was equipped with numerous piston-engined aircraft, while several high-ranking officials sought to adopt new designs that harnessed newly developed jet propulsion instead. During the same time period, Swiss defense companies also sought to develop increasingly capable equipment, including Eidgenössische Flugzeugwerke Emmen 's EFW N-20, which would be Switzerland's first domestically designed and manufactured jet fighter. [1] According to author Fiona Lombardi, development of the N-20 was greatly hindered by a lack of technical knowledge and over-ambitious performance demands, which contributed to a protracted development programme. This effort would never progress beyond the prototype stage before being eclipsed by more capable aircraft and ultimately terminated. [1]
During 1947, independent of the N-20 effort, Swiss firm Flug- und Fahrzeugwerke Altenrhein (FFA) decided to embark on their own independent fighter jet development programme. [1] [2] Designated P-16, it was reportedly conceived as being a supersonic-capable fighter-bomber that would be capable of deployment from the more remote and compact alpine bases. According to periodical Popular Mechanics, this ability to operate from short runways was particularly ambitious, as such a requirement had proved to be a substantial and persistence hindrance in efforts to procure suitable jet fighters for the Swiss Air Force. [3] [1] By the end of 1950, the Swiss Air Force had procured numerous subsonic jet aircraft from foreign sources, including the British de Havilland Vampire and de Havilland Venom fighters; however, the service still had a vacant role for a supersonic-capable fighter. [4]
During 1952, a pair of prototypes were ordered from FFA. On 25 April 1955, the first of these aircraft (J-3001) performed its maiden flight. This prototype was subsequently destroyed in a crash on 31 August 1955, having conducted 22 flights with a cumulative flight time of 12 hours 38 minutes. On 15 August 1956, the second prototype exceeded the sound barrier for the first time. This prototype completed another 310 flights by March 1958, being withdrawn shortly thereafter.[ citation needed ] A development contract for a batch of four pre-production aircraft was awarded. These aircraft, which were designated Mk II, differed from the earlier prototypes in a variety of ways; perhaps most significantly, these aircraft were furnished with the more powerful Armstrong Siddeley Sapphire 7 engine in place of the prototype's Sapphire 6.[ citation needed ]
Reportedly, test flights of the pre-production aircraft proved itself to have promise; during 1958, a production contract was awarded for 100 aircraft. However, another accident occurred when the first pre-production machine (J-3003) was destroyed in a crash on 25 March 1958 after 102 flights. According to Lombardi, the second crash was a major blow to the project; it has been claimed that the Swiss Government decided to cancel the entire order due to the accidents involved. [4] By the end of the 1950s, Switzerland opted to procure British-built Hawker Hunters to meet the Swiss Air Force's needs instead of the P-16. [5]
Following the cancellation, FFA decided to continue the P-16 program at its own expense for a while. The company completing two further aircraft, which conformed to the more capable MK III standard; these (X-HB-VAC/J-3004 and X-HB-VAD/J-3005) conducted their first flights in July 1959 and March 1960 respectively, while their last flights were performed during April 1960 and June 1960. One of the last flights was the one and only presentation abroad at Friedrichshafen on the 26th of June 1960. [6] Despite attempts by the company to attract customers, no buyers ultimately emerged for the type.[ citation needed ]
Certain design aspects of the P-16 were used by business man and inventor Bill Lear when developing the first of the highly successful Learjet family of business jets, the Learjet 23. [7] Several of the engineers behind the P-16 later worked for Lear, and the design of both the P-16 and Learjet 23 bore several similarities; some historians have alleged the latter was a direct derivative of the former. [8] According to Bill Lear's son, William P. Lear, the designs of the P-16 and the Learjet possessed substantial differences, particularly in terms of their wing and tail configurations, dismissing claims of there being a close similarities between the two as "stories" and "fantasy". [9] William had become involved in the P-16 program at a later stage, which included flying the type multiple times, after FFA had reached out to him for his assessment of the aircraft during 1960. [8]
The FFA P-16 was a single-seat, single-engine aircraft, designed to be especially well suited to the close air support (CAS) role, but to also perform as a capable interceptor aircraft as well. [2] [3] In terms of its basic configuration, it was furnished with a low-mounted wing, air intakes on the fuselage sides, and the horizontal stabilizer mounted halfway up the fin. The exterior skin was composed of a relatively light-gauge alloy; in key areas, a specialised sandwich-type design was used to preserve stiffness, such as the wings. To facilitate effective operations when deploying upon unprepared fields, a relatively heavy undercarriage, complete with dual-wheels and tyres, was adopted; furthermore, it was designed with surplus strength to accommodate the potential needs of future variants of the P-16. [2]
The P-16 could provide a high level of short-field performance, a factor which had been emphasized during its design. [2] To accomplish this, the wing was equipped with various high-lift devices; these included somewhat uncommon full-span Krueger flaps on the leading edge, large Fowler-type flaps on the inboard-trailing edge, and Flaperons; ailerons which also operated as flaps. In conjunction, these devices reportedly allowed the aircraft to take off and land within 1,000 ft (330 m) at high altitude, allowing the P-16 to operate from the Alpine valleys characteristic of Switzerland. [2] The wing itself was straight and relatively thin, achieved a low-aspect ratio; it featured multi-spar construction. [3] It is provisioned with tip-tanks which, in addition to storing fuel, provide a structural function, acting as end plates. A fuselage break aft of the wings enabled the rapid changing of the engine. [2]
The majority of powered systems, such as the flight controls, primarily harnessed Hydraulic power in the form of a Dowty-built high-pressure system; this was driven by the aircraft's turbojet engine and supplemented by accumulators for emergency operation of the undercarriage, air brakes and flaps. [2] A second backup system is provided via a pneumatic system, powering the wheel brakes as well as undercarriage deployment and jettisoning the canopy. Bleed air drawn from the engine provided cockpit pressurization and air conditioning for pilot comfort. [2] The electrical system incorporated a 24 V DC generator, electricity was used for various systems, including the engine starter, fuel pumps, windscreen heating, ultra high frequency (UHF) radio and radar set. Armaments were stored underneath the wings and within a weapons bay housed in the fuselage centre-section; the latter could accommodate rockets, fragmentation or napalm bombs, or a large fuel tank for additional endurance; furthermore, a pair of 30 mm cannon were permanently mounted in the nose. [2]
Aktiengesellschaft für Flugzeugunternehmungen proposed several variants:
As of 2007, only a single example of the P-16, which was assembled from elements of two separate prototypes, remains in existence. It is on display at the Swiss Air Force Museum at the Dübendorf Air Base. [13]
Data fromSwitzerland's P-16: Father of the Learjet [14]
General characteristics
Performance
Armament
The Hawker Hunter is a transonic British jet-powered fighter aircraft that was developed by Hawker Aircraft for the Royal Air Force (RAF) during the late 1940s and early 1950s. It was designed to take advantage of the newly developed Rolls-Royce Avon turbojet engine and the swept wing, and was the first jet-powered aircraft produced by Hawker to be procured by the RAF. On 7 September 1953, the modified first prototype broke the world air speed record for aircraft, achieving a speed of 727.63 mph.
The HFB 320 Hansa Jet is a twin-engine, ten-seat business jet that was designed and produced by German aircraft manufacturer Hamburger Flugzeugbau between 1964 and 1973. The most recognisable and unconventional feature of the aircraft is its forward-swept wing.
The Learjet 60 is a mid-size cabin, medium-range business jet aircraft manufactured by Bombardier Aerospace in Wichita, Kansas. Powered by two Pratt & Whitney Canada PW305A engines, it has a range of 2,405 nautical miles (4,454 km) with NBAA 100 nmi (190 km) reserves, ISA. In July 2012 Bombardier Aerospace announced a temporary "production pause" of the latest variant Learjet 60XR to begin in the fourth quarter of 2012.
The Folland Gnat is a British compact swept-wing subsonic fighter aircraft that was developed and produced by Folland Aircraft. Envisioned as an affordable light fighter in contrast to the rising cost and size of typical combat aircraft, it was procured as a trainer aircraft for the Royal Air Force (RAF) as well as by export customers, who used the Gnat in both combat and training capacities.
The Gloster Javelin is a twin-engined all-weather interceptor aircraft that served with Britain's Royal Air Force from the mid-1950s until the late 1960s. It was a T-tailed delta-wing aircraft designed for night and all-weather operations and was the last aircraft design to bear the Gloster name. Introduced in 1956 after a lengthy development period, the aircraft received several upgrades during production to its engines, radar and weapons, including support for the De Havilland Firestreak air-to-air missile.
The Saunders-Roe SR.53 was a British prototype interceptor aircraft of mixed jet and rocket propulsion developed for the Royal Air Force (RAF) by Saunders-Roe in the early 1950s. As envisaged, the SR.53 would have been used as an interceptor aircraft, using its rocket propulsion to rapidly climb and approach incoming hostile bombers at high speeds; following its attack run, the aircraft would then return to its base using jet propulsion.
The British Aerospace 125 is a twinjet mid-size business jet. Originally developed by de Havilland and initially designated as the DH.125 Jet Dragon, it entered production as the Hawker Siddeley HS.125, which was the designation used until 1977. Later on, more recent variants of the type were marketed as the Hawker 800.
The Saab 29 Tunnan, colloquially also Flygande Tunnan, is an early jet-powered fighter aircraft designed and produced by the Swedish aircraft manufacturer Saab. It was the second turbojet-powered combat aircraft to be developed in Sweden, the first being the Saab 21R, and it was the first Western European fighter to be produced with a swept wing after the Second World War, only being preceded in Western Europe as a whole by the Messerschmitt Me 262 built during the conflict.
Learjet was a manufacturer of business jets for civilian and military use based in Wichita, Kansas, United States. Founded in the late 1950s by William Powell Lear as Swiss American Aviation Corporation, it became a subsidiary of Canadian Bombardier Aerospace in 1990, which marketed the company’s aircraft as the "Bombardier Learjet Family". The 3,000th Learjet was delivered in June 2017. The Learjet line was once sufficiently popular that the Learjet name became synonymous and interchangeable with the terms business jet or private jet in the popular vernacular. In February 2021, Bombardier announced the end of production for all new Learjet aircraft in 2021, with the continuation of support and maintenance for aircraft currently in service.
The Bombardier Challenger 600 series is a family of business jets developed by Canadair after a Bill Lear concept, and then produced from 1986 by its new owner, Bombardier Aerospace. At the end of 1975, Canadair began funding the development of LearStar 600, and then bought the design for a wide-cabin business jet in April 1976. On 29 October, the programme was launched, backed by the Canadian federal government, and designed to comply with new FAR part 25 standards.
The Armstrong Siddeley Sapphire is a British turbojet engine that was produced by Armstrong Siddeley in the 1950s. It was the ultimate development of work that had started as the Metrovick F.2 in 1940, evolving into an advanced axial flow design with an annular combustion chamber that developed over 11,000 lbf (49 kN). It powered early versions of the Hawker Hunter and Handley Page Victor, and every Gloster Javelin. Production was also started under licence in the United States by Wright Aeronautical as the J65, powering a number of US designs. The Sapphire's primary competitor was the Rolls-Royce Avon.
The Hawker P.1127 and the Hawker Siddeley Kestrel FGA.1 are the British experimental and development aircraft that led to the Hawker Siddeley Harrier, the first vertical and/or short take-off and landing (V/STOL) jet fighter-bomber.
The Soko G-2 Galeb is a Yugoslav single engine, two-seater jet trainer and light ground-attack aircraft. The G-2 was developed during the 1950s by the Aeronautical Technical Institute at Žarkovo as a replacement for the Lockheed T-33 in service with the Yugoslav Air Force. Production started in 1965 at the Soko aircraft factory in Mostar, and ended in 1985 with 248 aircraft delivered. The G-2 had the distinction of being the first mass-produced jet aircraft in socialist Yugoslavia. It also served as a basis for the single-seat ground-attack J-21 Jastreb.
The Learjet Model 35 and Model 36 are a series of American multi-role business jets and military transport aircraft manufactured by Learjet between 1973 and 1993. When used by the United States Air Force, they carry the designation C-21A. Learjet was acquired by Bombardier Aviation in 1990 and is now a subsidiary, so the aircraft is also known as the Bombardier Learjet 35.
The Learjet 45 (LJ45) aircraft is a mid-size business jet aircraft produced by the Learjet Division of Bombardier Aerospace.
The Learjet 23 is an American six-to-eight-seat twinjet, high-speed business jet manufactured by Learjet. Introduced in 1964, it was Learjet's first model and created a new market for fast and efficient small business aircraft. Production ended in 1966 after 101 aircraft had been delivered.
The RFB Fantrainer is a two-seat flight training aircraft which uses a mid-mounted ducted fan propulsion system. Developed and manufactured by German aircraft company Rhein-Flugzeugbau GmbH (RFB), it has been used by the Royal Thai Air Force.
The EFW N-20 Aiguillon was Switzerland's first indigenous jet fighter project. The Swiss Federal Aircraft Factory developed a design for a four-engined swept winged fighter following the end of the Second World War. An unpowered sub-scale N-20.01 glider and a turbojet powered test aircraft, also sub-scale and known as the N-20.02 Arbalète ("Crossbow"), were test flown. A fighter prototype N-20.10 Aiguillon was built but never flown, and a twin-engines N.20.20 Harpon was also proposed but not followed up.
The Lockheed XF-104 Starfighter was a single-engine, high-performance, supersonic interceptor prototype for a United States Air Force (USAF) series of lightweight and simple fighters. Only two aircraft were built; one aircraft was used primarily for aerodynamic research and the other served as an armament testbed, both aircraft being destroyed in accidents during testing. The XF-104s were forerunners of over 2,500 production Lockheed F-104 Starfighters.
The Hawker Siddeley HS.141 was a 1970s design study and submission for a British V/STOL airliner requirement. Designed by Hawker Siddeley Aviation and tested in wind tunnels neither prototypes nor production aircraft were produced.