Fluidized bed

For other topics on fluidization, see Fluidized bed combustion, Fluidized bed reactor, Fluidized bed concentrator, and Fluidisation.

Oldest power station utilizing circular fluidized bed technology, in Lünen, Germany

A fluidized bed is a physical phenomenon that occurs when a solid particulate substance (usually present in a holding vessel) is under the right conditions so that it behaves like a fluid. The usual way to achieve a fluidized bed is to pump pressurized fluid into the particles. The resulting medium then has many properties and characteristics of normal fluids, such as the ability to free-flow under gravity, or to be pumped using fluid technologies.

The resulting phenomenon is called fluidization. Fluidized beds are used for several purposes, such as fluidized bed reactors (types of chemical reactors), solids separation, ^[1] fluid catalytic cracking, fluidized bed combustion, heat or mass transfer or interface modification, such as applying a coating onto solid items. This technique is also becoming more common in aquaculture for the production of shellfish in integrated multi-trophic aquaculture systems. ^[2]

Properties

A fluidized bed consists of fluid-solid mixture that exhibits fluid-like properties. As such, the upper surface of the bed is relatively horizontal, which is analogous to hydrostatic behavior. The bed can be considered to be a heterogeneous mixture of fluid and solid that can be represented by a single bulk density.

Furthermore, an object with a higher density than the bed will sink, whereas an object with a lower density than the bed will float, thus the bed can be considered to exhibit the fluid behavior expected of Archimedes' principle. As the "density", (actually the solid volume fraction of the suspension), of the bed can be altered by changing the fluid fraction, objects with different densities comparative to the bed can, by altering either the fluid or solid fraction, be caused to sink or float.

In fluidised beds, the contact of the solid particles with the fluidisation medium (a gas or a liquid) is greatly enhanced when compared to packed beds. This behavior in fluidised combustion beds enables good thermal transport inside the system and good heat transfer between the bed and its container. Similarly to the good heat transfer, which enables thermal uniformity analogous to that of a well mixed gas, the bed can have a significant heat-capacity whilst maintaining a homogeneous temperature field.

Application

Fluidized beds are used as a technical process which has the ability to promote high levels of contact between gases and solids. In a fluidised bed a characteristic set of basic properties can be utilised, indispensable to modern process and chemical engineering, these properties include:

• Extremely high surface area contact between fluid and solid per unit bed volume
• High relative velocities between the fluid and the dispersed solid phase.
• High levels of intermixing of the particulate phase.
• Frequent particle-particle and particle-wall collisions.

Taking an example from the food processing industry: Fluidized beds are used to accelerate freezing in some individually quick frozen (IQF) tunnel freezers. These Fluidized bed tunnels are typically used on small food products like peas, shrimp or sliced vegetables, and may use cryogenic or vapor-compression refrigeration. The fluid used in Fluidized beds may also contain a fluid of catalytic type; that's why it is also used to catalyse the chemical reaction and also to improve the rate of reaction.

Fluidized beds are also used for efficient bulk drying of materials. Fluidized bed technology in dryers increases efficiency by allowing for the entire surface of the drying material to be suspended and therefore exposed to the air. This process can also be combined with heating or cooling, if necessary, according to the specifications of the application.

History

In 1922, Fritz Winkler made the first industrial application of fluidization in a reactor for a coal gasification process. ^[3] In 1942, the first circulating fluid bed was built for catalytic cracking of mineral oils, with fluidisation technology applied to metallurgical processing (roasting arsenopyrite) in the late 1940s. ^{[4] [5]} During this time theoretical and experimental research improved the design of the fluidised bed. In the 1960s VAW-Lippewerk in Lünen, Germany implemented the first industrial bed for the combustion of coal and later for the calcination of aluminium hydroxide.

Fluidized bed types

Bed types can be coarsely classified by their flow behavior, including: ^[6]

• Stationary or Particulate fluidized bed is the classical approach where the gas at low velocities is used and fluidization of the solids is relatively stationary, with some fine particles being entrained.
• In Bubbling fluidized (also called Aggregative fluidized bed), the velocities of the fluid is high, thus forming of two separate phases – continuous phase (dense or emulsion phase) and a discontinuous phase (lean or bubble phase).
• Circulating fluidized beds (CFB), where gases are at a higher velocity sufficient to suspend the particle bed, due to a larger kinetic energy of the fluid. As such the surface of the bed is less smooth and larger particles can be entrained from the bed than for stationary beds. Entrained particles are recirculated via an external loop back into the reactor bed. Depending on the process, the particles may be classified by a cyclone separator and separated from or returned to the bed, based upon particle cut size.
• Vibratory fluidized beds are similar to stationary beds, but add a mechanical vibration to further excite the particles for increased entrainment.
• Transport or flash reactor (FR): At velocities higher than CFB, particles approach the velocity of the gas. Slip velocity between gas and solid is significantly reduced at the cost of less homogeneous heat distribution.
• Annular fluidized bed (AFB): A large nozzle at the center of a bubble bed introduces gas as high velocity achieving the rapid mixing zone above the surrounding bed comparable to that found in the external loop of a CFB.
• Mechanically Fluidized Reactor (MFR): A mechanical stirrer is used to mobilize particles and achieve properties similar to that a well-mixed fluidized bed. It does not require fluidization gas. ^[7]
• Narrow fluidized beds (NFB): For this case, the ratio between the tube and the grain diameters is equal or less than around 10. The dynamics of the bed is then different from the other types of fluidized beds because of strong confinement effects, and the presence of granular plugs, consisting of regions with high concentrations in solids alternating with low solids concentrations, is common. ^{[8] [9] [10]}

Bed design

A diagram of a fluidized bed

Basic model

When the packed bed has a fluid passed over it, the pressure drop of the fluid is approximately proportional to the fluid's superficial velocity. In order to transition from a packed bed to a fluidised condition, the gas velocity is continually raised. For a free-standing bed there will exist a point, known as the minimum or incipient fluidisation point, whereby the bed's mass is suspended directly by the flow of the fluid stream. The corresponding fluid velocity, known as the "minimum fluidisation velocity", ${\displaystyle u_{mf}}$. ^[11]

Beyond the minimum fluidisation velocity (${\displaystyle u\geq u_{mf}}$), the bed material will be suspended by the gas-stream and further increases in the velocity will have a reduced effect on the pressure, owing to sufficient percolation of the gas flow. Thus the pressure drop for ${\displaystyle u>u_{mf}}$ is relatively constant.

At the base of the vessel the apparent pressure drop multiplied by the cross-section area of the bed can be equated to the force of the weight of the solid particles (less the buoyancy of the solid in the fluid).

$${\displaystyle \Delta p_{w}=H_{w}(1-\epsilon _{w})(\rho _{s}-\rho _{f})g=[M_{s}g/A][(\rho _{s}-\rho _{f})/\rho _{s}]}$$

where:

${\displaystyle \Delta p_{w}}$ is the bed pressure drop

${\displaystyle H_{w}}$ is the bed height

${\displaystyle \epsilon _{w}}$ is the bed voidage, i.e. the fraction of the bed volume that is occupied by the voids (the fluid spaces between the particles)

${\displaystyle \rho _{s}}$ is the apparent density of bed particles

${\displaystyle \rho _{f}}$ is the density of the fluidising fluid

${\displaystyle g}$ is the acceleration due to gravity

${\displaystyle M_{s}}$ is the total mass of solids in the bed

${\displaystyle A}$ is the cross-sectional area of the bed

Geldart Groupings

In 1973, Professor D. Geldart proposed the grouping of powders in to four so-called "Geldart Groups". ^[12] The groups are defined by their locations on a diagram of solid-fluid density difference and particle size. Design methods for fluidised beds can be tailored based upon the particle's Geldart grouping: ^[11]

Group A For this group the particle size is between 20 and 100 μm, and the particle density is typically less than 1.4g/cm³. Prior to the initiation of a bubbling bed phase, beds from these particles will expand by a factor of 2 to 3 at incipient fluidisation, due to a decreased bulk density. Most powder-catalyzed beds utilize this group.

Group B The particle size lies between 40 and 500 μm and the particle density between 1.4-4g/cm³. Bubbling typically forms directly at incipient fluidisation.

Group C This group contains extremely fine and consequently the most cohesive particles. With a size of 20 to 30 μm, these particles fluidise under very difficult to achieve conditions, and may require the application of an external force, such as mechanical agitation.

Group D The particles in this region are above 600 μm and typically have high particle densities. Fluidisation of this group requires very high fluid energies and is typically associated with high levels of abrasion. Drying grains and peas, roasting coffee beans, gasifying coals, and some roasting metal ores are such solids, and they are usually processed in shallow beds or in the spouting mode.

Distributor

Typically, pressurized gas or liquid enters the fluidised bed vessel through numerous holes via a plate known as a distributor plate, located at the bottom of the fluidised bed. The fluid flows upward through the bed, causing the solid particles to be suspended. If the inlet fluid is disabled, the bed may settle, pack onto the plate or trickle down through the plate. Many industrial beds use a sparger distributor instead of a distributor plate. The fluid is then distributed through a series of perforated tubes.

See also

• Cyclonic separation – A method of separating gases and particulate matter
• Fluidization – Principles and theory of fluidization
• Fluidized bed combustion – Application of fluidized beds to combustion
• Fluidized bed reactor – Application of fluidized beds to reactive chemical processes
• Fluidized bed concentrator – Application of fluidized beds to remove VOCs/HAPs from industrial exhaust
• Unit operation – Other Engineering unit operations
• Chemical looping combustion – Dual fluidized bed application

References

1. Peng, Z.; Moghtaderi, B.; Doroodchi, E. (2017), "A simple model for predicting solid concentration distribution in binary-solid liquid fluidized beds", AIChE Journal, 63 (2): 469:484, doi:10.1002/aic.15420
2. "Wang, JK, 2003. Conceptual design of a microalgae-based recirculating oyster and shrimp system. Aquacultural Engineering 28, 37-46" (PDF). Archived from the original (PDF) on 2013-10-20. Retrieved 2014-01-23.
3. Grace, John R.; Leckner, Bo; Zhu, Jesse; Cheng, Yi (2008), "Fluidised Beds", in Clayton T. Crow (ed.), Multiphase Flow Handbook , CRC Press, p. 5:71, doi:10.1201/9781420040470.ch5 (inactive 2024-11-11), ISBN   978-1-4200-4047-0 , retrieved 4 June 2012
4. Office of Communications (November 3, 1998), The Fluid Bed Reactor:Baton Rouge, Louisiana (pdf), American Chemical Society, retrieved 4 June 2012
5. Grace; Leckner; Zhu; Cheng, p. 5:75{{citation}}: Missing or empty |title= (help)
6. Fluidisation technology, Outotec, May 2007, retrieved 4 June 2012
7. Chaudhari, Mitesh C., "Effect of Liquid-Solid Contact on Thermal Cracking of Heavy Hydrocarbons in a Mechanically Fluidised Reactor" (2012). Electronic Thesis and Dissertation Repository. Paper 1009. http://ir.lib.uwo.ca/etd/1009
8. Cúñez, F. D.; Franklin, E. M. (2019). "Plug regime in water fluidized beds in very narrow tubes". Powder Technology. 345: 234–246. arXiv: 1901.07351 . Bibcode:2019arXiv190107351C. doi:10.1016/j.powtec.2019.01.009. S2CID   104312233.
9. Cúñez, Fernando David; Franklin, Erick M. (March 2020). "Mimicking layer inversion in solid-liquid fluidized beds in narrow tubes". Powder Technology. 364: 994–1008. arXiv: 1912.04989 . doi:10.1016/j.powtec.2019.09.089. S2CID   209202482.
10. Cúñez, Fernando David; Franklin, Erick M. (2020-08-01). "Crystallization and jamming in narrow fluidized beds". Physics of Fluids. 32 (8): 083303. arXiv: 2007.15442 . Bibcode:2020PhFl...32h3303C. doi:10.1063/5.0015410. ISSN   1070-6631. S2CID   220871672.
11. Holdich, Richard Graham (November 1, 2002), "Chapter 7: Fluidisation" (PDF), Fundamentals of Particle Technology, Midland Information Technology & Publishing, ISBN   978-0-9543881-0-2 , retrieved 4 June 2012
12. Geldart, D. (1973). "Types of gas fluidisation". Powder Technology. 7 (5): 285–292. doi:10.1016/0032-5910(73)80037-3.

External links

• Video: Liquid-Solid Fluidized Bed
• US DOE Fluidized Bed Technology – Overview website
• US DOE NETL Fact Sheet