Geurie crossing loop collision

Last updated

Geurie crossing loop collision
Australia New South Wales location map blank.svg
Red pog.svg
Location in New South Wales
Details
Date23 August 1963
9 pm
Location Geurie, Central West region, New South Wales
Coordinates 32°23′46″S148°49′40″E / 32.396101°S 148.827662°E / -32.396101; 148.827662
Country Australia
Line Main Western railway line
Operator NSWGR
Incident typeCollision
CauseSignal failure
Statistics
Trains2
Passengers110
Crew4
Deaths0
Injured19
DamageBoth engines withdrawn due to damage

The Geurie crossing loop collision occurred on the night of 23 August 1963. Geurie is located between Orange and Dubbo in New South Wales, Australia.

Contents

Events

The Sydney-bound Bourke Mail train, with 110 passengers, was steaming towards Geurie station. The locomotive was C38 Pacific steam engine, 3817. Standing in the loop, beside a grain silo, was a goods train, hauled by a 265-tonne (292-short-ton) Beyer-Garratt AD60 class locomotive 6003. It was refuged so as to cross the Mail train. [1] [2]

The length from the front of the Garratt locomotive to the driver's position contributed to a misjudgment of standing clear of the mainline. 3817 collided with the Garratt locomotive at an estimated speed of 32 kilometres per hour (20 mph). [1]

The fouling point, as was common practice at the time, was marked by a white lamp on a white post located quite close to the actual fouling point. The points at the entrance to the loop were operated by a ground frame and interlocked with signals using annett keys. There were no track circuits over the points which might have detected the foul locomotive and thus held the home signal at "red" and thus stopped the mail train short of the obstruction.

The impact of the two locomotives colliding forced the Garratt into the side of the silo and reared up its boiler section on to its leading water unit. 3817 was derailed and pushed over on to its side. Three carriages of the Mail train were also derailed. The collision damaged approximately 60 metres (200 ft) of track on the main line and loop and the line was not reopened for another three days. [1]

Damages

A total of 19 passengers aboard the Mail train were injured. [1]

Due to the considerable damage to both locomotives and the decline of steam traction then under way, neither 6003 nor 3817 returned to service. [1]

See also

Related Research Articles

<span class="mw-page-title-main">LNER Class V2</span> Class of 184 three-cylinder 2-6-2 locomotives

The London and North Eastern Railway (LNER) Class V2 2-6-2 steam locomotives were designed by Sir Nigel Gresley for express mixed traffic work, and built at the LNER shops at Doncaster and Darlington between 1936 and 1944. The best known is the first of the class, 4771 Green Arrow, which is the sole survivor of the class.

The Hines Hill train collision occurred on the Eastern Goldfields Railway on 14 January 1996 at Hines Hill, Western Australia. Two trains entered a passing loop simultaneously in opposing directions, although signals at the end of the passing loop were correctly showing red for stop.

<span class="mw-page-title-main">Charfield railway disaster</span> 1928 train crash in Charfield, England

The Charfield railway disaster was a fatal train crash which occurred on 13 October 1928 in the village of Charfield in the English county of Gloucestershire. The London, Midland and Scottish Railway (LMS) Leeds to Bristol night mail train failed to stop at the signals protecting the down refuge siding at Charfield railway station. The weather was misty, but there was not a sufficiently thick fog for the signalman at Charfield to employ fog signalmen. A freight train was in the process of being shunted from the down main line to the siding, and another train of empty goods wagons was passing through the station from the Bristol (up) direction.

<span class="mw-page-title-main">1967 Thirsk rail crash</span> Train crash in Yorkshire, England on 31 July 1967

The Thirsk rail crash occurred on 31 July 1967 at Thirsk, Yorkshire, England on the British Rail East Coast Main Line.

There have been a number of train accidents on the railway network of Victoria, Australia. Some of these are listed below.

The railways of New South Wales, Australia have had many incidents and accidents since their formation in 1831. There are close to 1000 names associated with rail-related deaths in NSW on the walls of the Australian Railway Monument in Werris Creek. Those killed were all employees of various NSW railways. The details below include deaths of employees and the general public.

The Orgreave Train Collision occurred on 13 December 1926 near Orgreave Colliery signal box on the Great Central Railway line about 4+12 miles (7.2 km) east of Sheffield. A goods train had collided with a preceding goods train on the same line, and the wreckage had obstructed the adjacent passenger line.

<span class="mw-page-title-main">New South Wales AD60 class locomotive</span> Class of four-cylinder Garratt locomotives

The New South Wales AD60 class were Beyer-Garratt patent articulated four-cylinder, simple, non-condensing, coal-fired superheated, 4-8-4+4-8-4 heavy goods steam locomotives built by Beyer, Peacock & Company for the New South Wales Government Railways in Australia.

This is a list of significant railway accidents in Queensland, Australia.

References

  1. 1 2 3 4 5 Pearce, Kenn (1999). Australian Railway Disasters. Davidson: IPL Books. ISBN   0-908876-09-2.
  2. Crosby, Heather (24 August 2013). "Geurie crash still vivid in minds of survivors after 50 years". Daily Liberal . Retrieved 3 March 2017.