Hansen & Schneider (motorcycle)

Last updated
Hansen & Schneider
Headquarters,
Germany
Key people
Michael Hansen
Roland Schneider
ProductsMotorcycles (1976-1982)

Hansen & Schneider were a range of limited production motorcycles produced by the German MV Agusta importers Michael Hansen and engineer Roland Schneider based on the MV Agusta 750 Sport America and the 350 Ipotesi models. The machines were manufactured from 1975 to 1982. [1]

Contents

History

Hansen GmbH [2] in Baden-Baden, became the German importers of MV Agusta in 1970. [3]

With nothing in the MV range between the 350 cc Ipotesi and the 750 Sport America, Hansen produced a 500 cc machine, the 500 S, by overboring the 350 Ipotesi. [4] [5] A racing version, the 500 SS, with double overhead camshafts was also produced. [4]

Hansen arranged the production of two special models in 1976 from the factory, the naked 800 SS Super America [6] and the fully faired 800 SS Super Daytona America, both based on the Sport America. These were "luxury sports machines", and the impression was created that these motorcycles were made more as a kind of hobby than commercial reasons. [7]

Hansen commissioned Magni to build a 892 cc machine, the 900 S Cento Valli in 1977. [8] Roland Schneider worked closely with Arturo Magni on the development of this model, [9] the increased stroke crankshaft being produced in Germany. [8]

In 1979 Hansen was given permission by the MV directors and the Agusta family to continue using the MV name on the 4-cylinder machines. The Corona, Grand Prix and Agostini models were built by Schneider, using some parts, such as cylinders, chain drive conversions and frames made by Magni. Production of these models continued to 1982. [10]

Hansen were the German distributor for Magni parts, and when Magni produced the Magni-Honda in 1980, many of the 300 produced were sold by Hansen. [11] Such was the cooperation between the two companies it has been speculated that the MB model designation stood for Magni-Hansen rather than Magni-Honda [12] Following the success of the Honda engine machine, Hansen requested that Magni made a version with BMW. The Magni-BMW did not sell well. [13]

Hansen, now run by Roland Schneider, continued with the supply of parts and restoration of MV Agustas until the 1990s when MSM-Performance took over the operation. [14]

Models

500 S

Based on the 350 cc MV Ipotesi, the engine's bore was increased to 75 mm, giving a displacement of 472 cc and a power output of 53 hp (40 kW) @ 8,900 rpm. Larger 3.00x18 front and 3.50x18 rear tyres were fitted. [4] An optional reduced-power version with 43 hp (32 kW) @ 8,200 rpm was available. These machines were produced in 1976 and 1977. [5]

500 SS

In 1977 a racing version of the 500 S was offered to special order. The machine had a completely revised engine with double overhead camshafts and produced 66 hp @ 11,100 rpm. Five examples were built. [4]

800 SS Super America

In 1976 Hansen arranged with the MV factory for them to produce an enhanced version of the 750 Sport America. [6] The standard model of the America was marketed as the 800 S America in Germany and the enhanced model was designated the 800 SS Super America. [15] A rear disc brake was fitted [16] and engine output raised to 82 bhp (61 kW) @ 9000 rpm from the 789 cc engine. The model was optionally available with a Magni exhaust system and EPM magnesium wheels. The model was produced from 1976 to 1978. [17]

800 SS Super Daytona America

The 800 SS Super Daytona America was a further development of the 800 SS Super America. It was fitted with a full fairing, a Magni 4-into-1 exhaust and EPM wheels. [15] Power output was raised to 90 bhp (67 kW)) @ 10,000 rpm. The model was produced from 1976 to 1977. [15] [18]

900 S Cento Valli

Hansen Roland Schneider commissioned Magni to build a 900 cc model, the 900 S Cento Valli. The engine used a 70 mm bore and a German crankshaft with a 2 mm increase in stroke, giving 892 cc. Valve sizes were increased to 31.8 mm inlet and 29 mm exhaust, four Dell'Orto PHF 30A carburettors were fitted and power increased to 104 bhp (78 kW) @ 10,000 rpm. The standard MV frame and shaft drive were retained, but with Koni rear shock absorbers. About 10 of these models were made, [8] which was also known as the 900 S Arturo Magni Cento Valli. [19]

1000 S Corona

Introduced in 1978, the 1000 S Corona was a larger capacity version of the Cento Valli. On the MV 4-cylinder engines the cylinders were cast individually. The 70 mm bore used on the Cento Valli left the cylinder liner very thin. By casting the cylinders in pairs, Magni was able to fit larger liners to match the increased bore. These cylinders are recognisable by having 9 cooling fins; the individually cast items having 11 fins. [20] Using the Magni paired cylinders and increasing the engine stroke to 62 mm give the Corona a 954 cc capacity. A racing camshaft was fitted giving a power output of 106 bhp (79 kW) @ 10,200 rpm. [21] [22]

1100 Grand Prix

In March 1978 Hansen announced the largest four of the range with a displacement of 1066 cc. Specially cast 9 fin, paired barrels had a 74 mm bore. To accommodate the larger bore, a new crankshaft carrier had to be produced. A specially produced crankshaft with a 62 mm stroke was used. The engine produced 119 bhp (89 kW) @ 10,200 rpm. 5 engines were made. Initially two were fitted in MV frames, modified for the chain drive of this model, and two fitted in Magni frames. The final engine was not fitted into a frame until the 2000s. [23] [24]

1000 Agostini

The 1000 Agostini was a development of the 1000 S Corona and was introduced in 1979. It used the same engine. The model was fitted with chain rear drive, a Magni frame with a box section swinging arm and Magni "banana" exhausts. [25] [26] Only 4 examples of this model were made. [27]

Technical details

500 S500 SS800 SS
Super America
800 SS
Super Daytona
America
900 S
Cento Valli
1000 S
Corona
1100
Grand Prix
1000
Agostini
Production1976-197719771976–19781976–19781977–19781978–19821978–19821979–1980
Capacity472 cc472 cc789 cc789 cc892 cc954 cc1066 cc954 cc
No. of cylinders22444444
Valve actuationOHVDOHCDOHCDOHCDOHCDOHCDOHCDOHC
Bore/Stroke75 x 56 mm75 x 56 mm67 × 56 mm67 × 56 mm70 × 58 mm70 × 62 mm74 × 62 mm70 × 62 mm
Power53 hp (40 kW)
@ 8,900 rpm
66 hp (49 kW)
@ 11,100 rpm
82 bhp (61 kW)
@ 9.000 rpm
90 bhp (67 kW)
@ 10.000 rpm
104 bhp (78 kW)
@ 10,000 rpm
106 bhp (79 kW)
@ 10,200 rpm
119 bhp (89 kW)
@ 10,200 rpm
104 bhp (78 kW)
@ 10,000 rpm
Final
drive
ChainChainShaftShaftShaftShaftChainChain
Wheelbase1310 mm1310 mm1420 mm1420 mm1420 mm1390 mm1450 mm1450 mm
Maximum
speed
210 km/h (130 mph)235 km/h (146 mph)230 km/h (140 mph)237 km/h (147 mph)230 km/h (140 mph)
Production
quantity
5101254
Footnotes [4] [5] [4] [6] [15] [16] [15] [18] [8] [19] [21] [22] [28] [23] [24] [29] [25] [27] [30]

Related Research Articles

<span class="mw-page-title-main">MV Agusta</span> Italian motorcycle manufacturer and racing team

MV Agusta is a high end motorcycle manufacturer founded by Count Domenico Agusta on 19 January 1945 as one of the branches of the Agusta aircraft company near Milan in Cascina Costa, Italy. The abbreviation MV stands for Meccanica (mechanics) Verghera, the hamlet where the first MVs were made. The modern headquarters and main production facilities are located in Varese, Italy on the shore of Lake Varese.

<span class="mw-page-title-main">MV Agusta F4 series</span> Four-cylinder sport bike

The MV Agusta F4 is an inline four-cylinder sport bike made by MV Agusta from 1999 until 2018. It was the motorcycle that launched the resurrection of the brand in 1998. The F4 was created by motorcycle designer Massimo Tamburini at CRC, following his work on the Ducati 916. The F4 has a single-sided swingarm, large diameter front forks and traditional MV Agusta red and silver livery. The F4 engine is also one of the few production superbikes to have a hemi-spherical cylinder head chamber design with 4 valves per cylinder.

<span class="mw-page-title-main">MV Agusta Brutale series</span> Series of Italian naked motorcycles

The MV Agusta Brutale series of motorcycles are manufactured by MV Agusta of Italy, starting in 2001. Its style is classified as a naked bike and the series consists of several models powered by either inline-four or inline-three, DOHC-engines in various capacities.

<span class="mw-page-title-main">MV Agusta 500 Three</span> Type of motorcycle

The MV Agusta 500cc Three (1965–1973) or MV Agusta Tre was a road racing motorcycle produced by the Italian manufacturer MV Agusta to compete in the 500 cc Grand Prix motorcycle racing World Championship. The motorcycle was introduced in 1966 to compete against the ever competitive Honda racing machines and was a bored out version of MV Agusta's highly successful 350 cc three cylinder. Giacomo Agostini won consecutive world championships in the 500 cc class with this motorbike from 1966 to 1972. In addition, MV Agusta won the Constructors' World Championships from 1967 to 1972. The MV Agusta Tre is considered the most successful racing motorcycle in history.

<span class="mw-page-title-main">MV Agusta 350B</span> Type of motorcycle

The MV Agusta 350B (Bicilindrica) was a series of motorcycles produced by the Italian manufacturer MV Agusta from 1970 to 1974. The motorcycle was first introduced at the Milan motorcycle show in 1969. The introduction of the "350" model was intended to bridge the production gap of MV Agusta in the medium-displacement sector and to take advantage of the prestige gained by the dominant GP racers. It was produced in "Sport", "Gran Turismo" and "Scrambler" versions.

<span class="mw-page-title-main">MV Agusta 750 S</span> Motorcycle manufactured by the company MV Agusta from 1970 to 1975

The MV Agusta 750 S also known as the MV Agusta 750 Sport, was a motorcycle manufactured by the MV Agusta company from 1970 to 1975. Production total of this model series was 583 machines.

<span class="mw-page-title-main">MV Agusta 750 Sport America</span> Motorcycle manufactured by the company MV Agusta from 1975 to 1977

The MV Agusta 750 Sport America was a motorcycle manufactured by the MV Agusta company from 1975 to 1977. Derivative models were produced in limited numbers until 1982, and the Magni models are still available to special order.

<span class="mw-page-title-main">MV Agusta 600</span> Motorcycle manufactured by the company MV Agusta from 1966 to 1970

The MV Agusta 600, also called the MV Agusta 600 4C and the MV Agusta 600 Turismo, was a motorcycle built by the MV Agusta company from 1966 to 1970. For the first time, a four-cylinder engine was fitted transversely to the direction of travel on a standard motorbike and cable-operated disc brakes were used. A total of 135 of this model were manufactured.

<span class="mw-page-title-main">MV Agusta 175 series</span> Series of Italian motorcycles

The MV Agusta 175 were a series of motorcycles produced by the Italian manufacturer MV Agusta from 1953 to 1960. The series included touring, GT, sports and supersports models. There were also two racing variants. Because of the shape of the petrol tank, the sports and supersport models became known as the Disco Volante. The series was MV's best seller.

<span class="mw-page-title-main">MV Agusta 125 Motore Lungo</span> Italian motorcycle

The MV Agusta 125 Motore Lungo, more commonly known as the "carter lungo", was a 125 cc, lightweight two-stroke motorcycle manufactured between 1950 and 1953 by Italian motorcycle manufacturer MV Agusta. The machine was often used in racing.

<span class="mw-page-title-main">MV Agusta F3 series</span> Type of motorcycle

The MV Agusta F3 is a series of motorcycles introduced in 2012 by the Italian manufacturer MV Agusta. These models are the first three-cylinder machines that MV Agusta have manufactured since the famous three-cylinder GP racers of the 1970s.

<span class="mw-page-title-main">MV Agusta Rivale</span> Italian motorcycle

The MV Agusta Rivale is a motorcycle that was produced by the Italian manufacturer MV Agusta from 2013 to 2017.

The MV Agusta RVS#1 is a limited-edition motorcycle produced by the Italian manufacturer MV Agusta. This machine is the first product of MV Agusta's “Reparto Veicoli Speciali” (RVS) department, and a reinterpretation of the MV Agusta Dragster. It is powered by a 150 bhp version of the company's 800 cc three-cylinder engine. The machines are all hand assembled and went on sale in 2019.

<span class="mw-page-title-main">MV Agusta 350 Ipotesi</span> Type of motorcycle

The MV Agusta 350 Ipotesi (Hypothesis) was a motorcycle produced by the Italian manufacturer MV Agusta from 1975 to 1977. The machine was conceived by Italian designer Giorgetto Giugiaro and based on the previous 350 B Sport Elettronica model. 1,991 "Sports" and 350 “Turismo” machines were produced.

<span class="mw-page-title-main">MV Agusta 125 Sport SE</span> Type of motorcycle

The MV Agusta 125 Sport SE was a sport motorcycle built from 1975 to 1977 by the Italian manufacturer MV Agusta. It was one of the last models to be produced by Meccanica Verghera at their Cascina Costa plant.

<span class="mw-page-title-main">MV Agusta 150 Sport RS</span> Type of motorcycle

The MV Agusta 150 Sport RS was a motorcycle produced by the Italian motorcycle MV Agusta in their Cascina Costa plant from 1959 to 1969.

<span class="mw-page-title-main">Magni (motorcycle)</span>

Magni is an Italian company that builds specialist motorcycles. The company is based in the city of Samarate in the province of Varese. Magni, in addition to building the bikes that bear its name, is also active in the construction of specials to order and a supplier of special parts for the restoration of MV Agusta classic motorcycles.

<span class="mw-page-title-main">MV Agusta Raid</span> Type of motorcycle

The MV Agusta Raid was a series of 250 and 300 cc motorcycles manufactured by the MV Agusta company in Cascina Costa, Italy from 1957 to 1961. At the time of introduction, the 250 cc class was considered a large capacity motorcycle.

The MV Agusta 250B (Bicilindrica) was a motorcycle produced by the Italian manufacturer MV Agusta from 1968 to 1971. The motorcycle was first introduced at the 1965 Milan EICMA motorcycle show and was based on the stillborn MV 166 Arno GT. The model was discontinued in 1971 following the introduction of an overbored version, the 350B.

<span class="mw-page-title-main">Ducati Road 250</span> SOHC motorcycle made by MotoTrans under licence from Ducati

The Ducati Road 250 is a 247 cc (15.1 cu in) single cylinder bevel drive SOHC motorcycle produced by the Spanish manufacturer MotoTrans, who were licensed by Ducati to produce motorcycles under the Ducati brand name and was produced from 1972 to 1977. The model was intended to be a Spanish domestic market version of the 250 Scrambler, although it was also exported to the US in 1972/3.

References

  1. Falloon 2011, pp. 187–213.
  2. "Classic MV Agusta". thebikemuseum.com. The Bike Museum. Retrieved 26 May 2019.
  3. Falloon 2011, p. 210.
  4. 1 2 3 4 5 6 Motorrad Katalog 1977, p. 134.
  5. 1 2 3 Schwab 1987, p. 58.
  6. 1 2 3 Cloesen 2014, p. 113.
  7. Tragatsch 2000, p. 123.
  8. 1 2 3 4 Falloon 2011, pp. 210–211.
  9. "MV Agusta America 750cc for Sale". www.mv-agusta.co.uk. Retrieved 29 September 2019.
  10. Falloon 2011, pp. 213–214.
  11. Cathcart 2003, p. 48.
  12. "Magni-Honda MH1 | Modelle". www.magni-bayern.de. Retrieved 21 September 2019.
  13. Cathcart 2003, p. 49.
  14. "Unternehmen". MSM – Performance (in German). Retrieved 29 September 2019.
  15. 1 2 3 4 5 Falloon 2011, p. 187.
  16. 1 2 "Classic MV Agusta - 1977 MV Agusta 800 SS Super America". thebikemuseum.com. The Bike Museum. Retrieved 26 May 2019.
  17. Schermer1977, p. 8.
  18. 1 2 "MV Agusta 800 SS Super Daytona America 1977". www.shepsters.com. Retrieved 29 September 2019.
  19. 1 2 "Classic MV Agusta - 1977 MV Agusta - Hansen 900 S Arturo Magni - Cento Valli". thebikemuseum.com. The Bike Museum. Retrieved 26 May 2019.
  20. Falloon 2011, pp. 205–207.
  21. 1 2 Falloon 2011, p. 211.
  22. 1 2 "Classic MV Agusta - 1978 MV Agusta - Hansen 1000S Corona". thebikemuseum.com. The Bike Museum. Retrieved 26 May 2019.
  23. 1 2 Falloon 2011, pp. 211–213.
  24. 1 2 "Classic MV Agusta - 1978 MV Agusta - Hansen 1100 Grand Prix". thebikemuseum.com. The Bike Museum. Retrieved 26 May 2019.
  25. 1 2 Falloon 2011, p. 213.
  26. Maierbacher1980, pp. 7–11.
  27. 1 2 "Classic MV Agusta - 1980 MV Agusta - Hansen 1000 Agostini". thebikemuseum.com. The Bike Museum. Retrieved 26 May 2019.
  28. Schafer 1992, p. 51.
  29. Schwab 1978, pp. 14–15.
  30. Maierbacher1980, p. 8.

Bibliography