MV Agusta 600

Last updated
MV Agusta 600
MV Agusta 600 roadster.jpg
MV Agusta 600 at the MV gathering at Malpensa Airport, Milan, Italy in 2013
Manufacturer MV Agusta
Also calledMV Agusta 600 4C
MV Agusta 600 Turismo
Production1966 to 1970
Successor MV Agusta 750 S
Class Touring motorcycle
Engine 592 cc (36 cu in) 4 cylinder DOHC
Four 24 mm Dell'Orto carburetors
Bore / stroke 58 mm × 56 mm (2.3 in × 2.2 in)
Compression ratio 9.3:1
Top speed185 km/h (115 mph)
Power 52 bhp (39 kW) @ 8,000 rpm
Ignition type Coil
Transmission 5-speed cassette gearbox
Shaft drive
Frame type Half-duplex cradle
Suspension Front: Teledraulic forks
Rear: Swingarm with hydraulic dampers
Brakes Front: Cable operated 214 mm double disc brake (later 230 mm drum brake)
Rear: 200 mm drum brake
Tires Front: 3.50 x 18
Rear: 400 x 18
Wheelbase 1,390 mm
Weight221 kg (dry)
Fuel capacity20 l

The MV Agusta 600, also called the MV Agusta 600 4C and the MV Agusta 600 Turismo, was a motorcycle built by the MV Agusta company from 1966 to 1970. For the first time, a four-cylinder engine was fitted transversely to the direction of travel on a standard motorbike and cable-operated disc brakes were used. A total of 135 of this model were manufactured. [1]

Contents

Development

Dr. Pietro Remor designed a racing engine for MV Agusta for the World Motorcycle Championship based on the Gilera four-cylinder, for which he was previously responsible. The engine of the 1950 MV 500/4 Cardano was inclined 30 degrees forward and had two overhead camshafts. Between the 2nd and 3rd cylinder was the shaft for the spur gears. Bore and stroke were 54 mm, and the inlet and outlet valves had a 90 degree between them. Behind the crankcase, the gearbox was installed transversely. [2] On the basis of this racing engine, MV Agusta developed a production engine with lower compression, power and engine speeds to increase reliability. [3] The production of the first motorcycle with transverse in-line four-cylinder was announced in 1950 by MV Agusta, a prototype (500 Tourismo) presented, but never went into production. [4] In November 1965, the MV Agusta 600 was finally launched at the Milan Motorcycle Show. [5]

Technical data

The air-cooled four-cylinder engine was installed transversely across the motorcycle chassis, predating the bestselling fours from Honda and Kawasaki. The heart of the MV Agusta four-cylinder is the crankcase rack. The crankshaft, cylinder and cylinder head were mounted on it. The rack took the nine-piece crankshaft in six bearing blocks, as well as the spur gears in the control tower for the double camshaft drive. After loosening twelve nuts, the units mounted on the rack could be lifted out. [6] Particularly striking was the fine ribbing of the cooling fins on the sump and the oversized cylinder head housing the double camshaft drive. The transversely mounted cassette transmission was driven by the engine through helical gears. It was connected to the shaft drive to the rear wheel via a spiral bevel gear angle drive. [7]

A novelty was the cable-operated disc brakes on the front telescopic forks, which was later replaced by a double sided drum brake. [8] At the insistence of Count Agusta, the machine was built as a tourer. The large rectangular headlight, the humpbacked tank and raised handlebars were not ideal for sports riders. [9] The black paint that the machine was finished in caused it to be nicknamed the Black pig. It was also called one of the ugliest motorcycles its time. [10] After the more powerful and more beautiful shaped model, the MV Agusta 750 S, was presented in 1970, it was the end of the unloved motorcycle. The MV Agusta 600 is today considered the most wanted and most expensive model of the older MV Agusta motorcycles. [11]

Specials

The 600 was finished in black, but one blue and one yellow special were produced. There was also a rumour of one being finished in red, but this is not recorded in the factory records. [10]

A Chartreuse Yellow version was produced [12] for Kym Bonython of Adelaide Australia. [13] The blue special was made for Vittorio Emanuele, Prince of Naples as a thank you for brokering a deal for Agusta helicopters with the Shah of Iran. [14] When MV test rider Fortunato Libanori tried to deliver the bike to the Geneva residence of Emanuele, he was chased away by Emanuele's mother Marie José of Belgium. The bike was entrusted to a local garage, from where Emanuele could ride it without his mother's knowledge. [15]

The Austrian, Wolfgang Stropek, finished tenth (although 3 laps behind Giacomo Agostini on the works MV Agusta 500 Three) [16] in the 1969 Finnish 500 GP. The bike was equipped with a fairing, a final chain drive and a reduced displacement engine in order to fit within the 500 cc category limit. [17] [18]

Bimota

The most well-known special based on MV 600 is the one that Massimo Tamburini created in 1971 [19] when Bimota (of which he was one of the founding partners) was a company that dealt with heating and air conditioning. [20] (Tamburini would later go on to design the MV Agusta F4 series). [21]

The Rimini designer created the bike during his spare time starting with a second-hand 600, which was the subject of extensive work on the chassis, mechanics and aesthetics. The chassis was stiffened with triangulation absent on the MV, the suspension components were replaced with Ceriani and the cable operated front disc brakes and the original rear drum brake, unsuitable for sports use, were replaced with high performance Fontana drum brakes. The engine received the head, cylinders and pistons of the MV 750 Sport, the head was ported and four Dell'Orto SS 24 carburettors used. The shaft drive was replaced by a chain. [19]

On the aesthetic side, the original fairing-free bike was changed into a street replica of the famous Grand Prix bikes on which Giacomo Agostini triumphed. This reworking gained the appreciation of the enthusiasts (including Angelo Bergamonti, who tested it on the occasion of a visit to Cascina Costa di Tamburini) and the disapproval of Count Domenico Agusta, who did not like these modifications of his machines. [1] [20] The revised motorbike weighed about 200 kg (24 kg less than the original 600) [1] and its 69 bhp engine (compared to the 52 of the original "600 Turismo") [8] allowed it to exceed 220 km/h (140 mph), with a clear improvement in performance even compared to the contemporary 750 S.

Tamburini sold the special some time later to an acquaintance in Modena. Passing through the hands of several owners, it was partially rebuilt in 2002. The bike is now in a private collection in Bologna. [19]

Related Research Articles

<span class="mw-page-title-main">MV Agusta</span> Italian motorcycle manufacturer and racing team

MV Agusta is a high end motorcycle manufacturer founded by Count Domenico Agusta on 19 January 1945 as one of the branches of the Agusta aircraft company near Milan in Cascina Costa, Italy. The abbreviation MV stands for Meccanica (mechanics) Verghera, the hamlet where the first MVs were made. The modern headquarters and main production facilities are located in Varese, Italy on the shore of Lake Varese.

<span class="mw-page-title-main">MV Agusta F4 series</span> Four-cylinder sport bike

The MV Agusta F4 is an inline four-cylinder sport bike made by MV Agusta from 1999 until 2018. It was the motorcycle that launched the resurrection of the brand in 1998. The F4 was created by motorcycle designer Massimo Tamburini at CRC, following his work on the Ducati 916. The F4 has a single-sided swingarm, large diameter front forks and traditional MV Agusta red and silver livery. The F4 engine is also one of the few production superbikes to have a hemi-spherical cylinder head chamber design with 4 valves per cylinder.

<span class="mw-page-title-main">Ducati L-twin engine</span>

The L-twin is a naturally aspirated two-cylinder petrol engine by Ducati. It uses a 90-degree layout and 270-degree firing order and is mounted with one cylinder nearly horizontal.

<span class="mw-page-title-main">MV Agusta 500 Three</span> Type of motorcycle

The MV Agusta 500cc Three (1965–1973) or MV Agusta Tre was a road racing motorcycle produced by the Italian manufacturer MV Agusta to compete in the 500 cc Grand Prix motorcycle racing World Championship. The motorcycle was introduced in 1966 to compete against the ever competitive Honda racing machines and was a bored out version of MV Agusta's highly successful 350 cc three cylinder. Giacomo Agostini won consecutive world championships in the 500 cc class with this motorbike from 1966 to 1972. In addition, MV Agusta won the Constructors' World Championships from 1967 to 1972. The MV Agusta Tre is considered the most successful racing motorcycle in history.

<span class="mw-page-title-main">MV Agusta 350B</span> Type of motorcycle

The MV Agusta 350B (Bicilindrica) was a series of motorcycles produced by the Italian manufacturer MV Agusta from 1970 to 1974. The motorcycle was first introduced at the Milan motorcycle show in 1969. The introduction of the "350" model was intended to bridge the production gap of MV Agusta in the medium-displacement sector and to take advantage of the prestige gained by the dominant GP racers. It was produced in "Sport", "Gran Turismo" and "Scrambler" versions.

BMW Motorrad is the motorcycle brand and division of German automotive manufacturer, BMW. It has produced motorcycles since 1923, and achieved record sales for the fifth year in succession in 2015. With a total of 136,963 vehicles sold in 2015, BMW registered a growth of 10.9% in sales in comparison with 2014. In May 2011, the 2,000,000th motorcycle produced by BMW Motorrad was an R1200GS.

<span class="mw-page-title-main">MV Agusta 750 S</span> Motorcycle manufactured by the company MV Agusta from 1970 to 1975

The MV Agusta 750 S also known as the MV Agusta 750 Sport, was a motorcycle manufactured by the MV Agusta company from 1970 to 1975. Production total of this model series was 583 machines.

<span class="mw-page-title-main">MV Agusta 750 Sport America</span> Motorcycle manufactured by the company MV Agusta from 1975 to 1977

The MV Agusta 750 Sport America was a motorcycle manufactured by the MV Agusta company from 1975 to 1977. Derivative models were produced in limited numbers until 1982, and the Magni models are still available to special order.

<span class="mw-page-title-main">MV Agusta 500 Four</span> Racing motorcycle manufactured by MV Agusta

The MV Agusta 500 four-cylinder (1973–1976) was a racing motorcycle manufactured by the Italian company MV Agusta, for competing in the 500 cc series, the premier class of the FIM World Motorcycle Championship. With this motorcycle MV Agusta won the 1973 constructor's world champion and Phil Read won the 1973 and 1974 500 cc riders world championships.

<span class="mw-page-title-main">MV Agusta 350 Six</span> Type of motorcycle

The MV Agusta 350 6 cilindri was a prototype racing motorcycle built by the Varese company MV Agusta in 1957, for the 350 cc class of the FIM Motorcycle World Championship. The project was resurrected in 1968. Neither version was ever used in a race. The only surviving model is now in the MV Agusta factory museum.

The MV Agusta 203 Bialbero and MV Agusta 220 Bialbero were Italian factory racing motorcycles made by MV Agusta to compete in the 1955 250 cc World Motorcycle Racing Championship. The machine won three GPs and with it MV Agusta won that year's 250 cc Constructors Championship.

<span class="mw-page-title-main">MV Agusta 125 Bialbero</span> Italian motorcycle

The MV Agusta 125 Bialbero was a 125 cc factory racer from the Italian brand MV Agusta, which was used between 1950 and 1960. The machine won 34 GPs, 6 rider's championships and one manufacturer's championship. The machine also won 4 Italian Championships and 10 National Championships in other countries.

<span class="mw-page-title-main">MV Agusta 125 Pullman</span> Type of motorcycle

The MV Agusta 125 Pullman was a motorcycle produced by the Italian manufacturer MV Agusta from 1953 to 1956. The model achieved a good sales success, and had the highest production of any machine from MV Agusta. Many brought the bike as the only means of family transport or as a work vehicle. Despite the questionable aesthetics, the Pullman offered a comfortable ride, derived by the driving position, soft suspension and large section tires. This was particularly appreciated by users, so much so that they were imitated by some competitors. 27,000 machines of this model series were produced. The model was also produced under licence in Spain by Avello, where it was marketed as the MV Avello 125 Pullman Turismo.

Piero Remor was an Italian engineer and motorcycle constructor, best known for his work for the Gilera and MV Agusta brands.

<span class="mw-page-title-main">MV Agusta 350 Ipotesi</span> Type of motorcycle

The MV Agusta 350 Ipotesi (Hypothesis) was a motorcycle produced by the Italian manufacturer MV Agusta from 1975 to 1977. The machine was conceived by Italian designer Giorgetto Giugiaro and based on the previous 350 B Sport Elettronica model. 1,991 "Sports" and 350 “Turismo” machines were produced.

<span class="mw-page-title-main">Magni (motorcycle)</span>

Magni is an Italian company that builds specialist motorcycles. The company is based in the city of Samarate in the province of Varese. Magni, in addition to building the bikes that bear its name, is also active in the construction of specials to order and a supplier of special parts for the restoration of MV Agusta classic motorcycles.

<span class="mw-page-title-main">Hansen & Schneider (motorcycle)</span>

Hansen & Schneider were a range of limited production motorcycles produced by the German MV Agusta importers Michael Hansen and engineer Roland Schneider based on the MV Agusta 750 Sport America and the 350 Ipotesi models. The machines were manufactured from 1975 to 1982.

The MV Agusta 250B (Bicilindrica) was a motorcycle produced by the Italian manufacturer MV Agusta from 1968 to 1971. The motorcycle was first introduced at the 1965 Milan EICMA motorcycle show and was based on the stillborn MV 166 Arno GT. The model was discontinued in 1971 following the introduction of an overbored version, the 350B.

<span class="mw-page-title-main">Ducati Road 250</span> SOHC motorcycle made by MotoTrans under licence from Ducati

The Ducati Road 250 is a 247 cc (15.1 cu in) single cylinder bevel drive SOHC motorcycle produced by the Spanish manufacturer MotoTrans, who were licensed by Ducati to produce motorcycles under the Ducati brand name and was produced from 1972 to 1977. The model was intended to be a Spanish domestic market version of the 250 Scrambler, although it was also exported to the US in 1972/3.

The Ducati Road 350 is a 340 cc (21 cu in) single cylinder bevel drive SOHC motorcycle produced by the Spanish manufacturer MotoTrans, who were licensed by Ducati to produce motorcycles under the Ducati brand name and was produced from 1973 to 1976. The model was intended to be for the Spanish domestic market although it was also exported to the US in 1973.

References

  1. 1 2 3 "Classic MV Agusta - 1968 MV Agusta 600". thebikemuseum.com. The Bike Museum. Archived from the original on 7 April 2019. Retrieved 27 May 2019.
  2. ↑ Motorrad 6/1967 p.98
  3. ↑ "V for Vintage". American Motorcyclist. 60 (7). American Motorcyclist Assoc: 56. July 2006. ISSN   0277-9358 . Retrieved 27 May 2019.
  4. ↑ Colombo, Grizzi & Patrignani 2016, p. 138.
  5. ↑ Falloon 2011, p. 61.
  6. ↑ "Geniestreich 4 Zylinder Motor". mv-agusta-club-schweiz.ch. Motorrad. 11 July 1979. Archived from the original on 20 April 2009. Retrieved 24 May 2019.
  7. ↑ Colombo, Grizzi & Patrignani 2016, p. 87.
  8. 1 2 "MV Agusta 600 4C". mv-agusta-club.de (in German). MV Agusta Club Deutschland. Retrieved 27 May 2019.
  9. ↑ Colombo, Grizzi & Patrignani 2016, p. 191.
  10. 1 2 Hunter, Chris (28 May 2011). "MV Agusta 600: the 'Black Pig'". Bike EXIF. Retrieved 27 May 2019.
  11. ↑ Colombo, Grizzi & Patrignani 2016, p. 190.
  12. ↑ "1968 MV Agusta 600 199 089". Stuart Parr Collection. Retrieved 27 May 2019.
  13. ↑ "Classic Italian Bikes for Sale". www.mv-agusta.co.uk. Retrieved 27 May 2019.
  14. ↑ Motociclismo d'Epoca 11/2007 pp.139-140
  15. ↑ Patrignani 1997.
  16. ↑ "Corriere dello Sport". 4 August 1969. p. 8.
  17. ↑ "1969 Finnish GP Imatra". www.imatranajo.com. Retrieved 27 May 2019.
  18. ↑ "MOTO-GP-1969". racingmemo.free.fr. Retrieved 27 May 2019.
  19. 1 2 3 Livolsi2009, pp. 98–105.
  20. 1 2 Walker 1998, p. 54.
  21. ↑ Ash2002, pp. 134–139.

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.