MV Agusta 125 Pullman

Last updated
MV Agusta 125 Pullman
MV Agusta grey vl.jpg
1953 MV Agusta 125 Pullman
Manufacturer MV Agusta
Production1953-1958
Class Standard
Engine 123.5 cc Two-stroke
Bore / stroke 53 × 56 mm
Compression ratio 6:1
Top speed75 km/h
Power Pullman: 5bhp @ 4,500 rpm
Super Pullman: 6 bhp @ 5,200 rpm
Ignition type Flywheel Magneto
Transmission Wet multi-plate clutch, 3 gears (4 gears on Super Pullman}, chain drive
Frame type Pullman: Single cradle
Super Pullman: Pressed steel beam
Suspension Front: Telescopic forks (Pullman), Earles forks (Super Pullman
Rear: Swinging arm
Brakes Drum brakes, 125 mm diameter
Tires Pullman: 3.50 x 15
Super Pullman: 2.75 x 18
Wheelbase 1,870 mm
Footnotes /references
[1] [2] [3] [4] [5] [6]

The MV Agusta 125 Pullman was a motorcycle produced by the Italian manufacturer MV Agusta from 1953 to 1956. The model achieved a good sales success, and had the highest production of any machine from MV Agusta. [7] Many brought the bike as the only means of family transport or as a work vehicle. Despite the questionable aesthetics, the Pullman offered a comfortable ride, derived by the driving position, soft suspension and large section tires. This was particularly appreciated by users, so much so that they were imitated by some competitors. 27,000 machines of this model series were produced. [1] The model was also produced under licence in Spain by Avello, where it was marketed as the MV Avello 125 Pullman Turismo. [8]

Contents

Background

At the beginning of the fifties, the motorcycle manufacturers tried to counter the rampant success of scooters produced by Piaggio and Innocenti by creating utility motorcycle that offered good versatility and practicality of use, overcoming the serious stability problems of the scooter, due to the small diameter of its wheels. [9]

Following the lead of Moto Guzzi who, in 1950, had put the Galletto into production, other motorcycle manufacturers ventured into the construction of hybrid models, such as the Sterzi Confort and Motom Delfino. [9]

Series 1

Unveiled at the Brussels Motor Show in January 1953, [2] the "Pullman" stood out for its rather original appearance. The cycle parts apparently stretched by the effect of the engine in a very rearward position with the rear suspension mounted on it. [5]

The engine was a unit construction, The engine was an air-cooled single-cylinder two-stroke with a bore and stroke of 53 × 56 mm giving a displacement 123.5 cc. [3] These dimensions were the same as the previous Motore Lungo model. Compression ratio was 6:1, and the engine was fed by a Dell'Orto MA17 carburetor. Ignition was by a flywheel magneto. A Wet multi-plate clutch was driven by gears from the crankshaft, and a three-speed gearbox was fitted, which was controlled by a twist grip. Drive to the rear wheel was by chain. [3]

The MV Agusta had an open cradle frame, made of steel tube, similar in shape to that of MV's "125 Ovunque" scooter, which itself was modelled on the successful "Lambretta 125 C" of 1950. Attached to the gearbox was the swinging arm, with an undamped shock absorber each side. Additionally a hydraulic central shock absorber was fitted. The machine was fitted with telescopic forks and 130 mm drum brakes. [3]

Rider comfort was enhanced by foot plates rather than the usual footrests, a single saddle and wide, for its class, 3,50 x 15 tyres. [10] A rack was fitted above the rear mudguard. The position of the engine created an unusual gap between the front wheel and the downtube of the frame that could be fitted with an optional sheet metal fairing, which could be used as a storage compartment.

Priced between 155,000 and 163,000 Lira, dependent on options, [2] sales of the model were good and helped MV Augusta to achieve and annual production of over 20,000 units. [11]

Series 2

The second series of the Pullman introduced in 1954. Apart from cosmetic changes, the twist grip gearchange was replaced by a conventional foot change. The rear shock absorbers were changed to hydraulically damped units, and the now redundant third shock absorber omitted. [12]

Production of this model stopped in 1956. [1]

Super Pullman

In 1955 the Pullman was joined by the "Super Pullman" model. This model was intended to look more like a "normal" motorcycle. [6] A sheet metal beam frame was used. The frame was pressed in two halves that were electrowelded together. Earles forks and more conventionally sized 18" wheels were fitted. [13] Engine power was increased to 6 bhp @ 5,200 rpm. [4]

The last machines produced in 1957 were used to test a prototype fuel injection 125 cm³ two-stroke engine which, due to the crisis in the motorcycle sector following the marketing of the Fiat 500, did not go into production. Production of the Super Pullman ceased in 1958, [14] after approximately 3,000 machines had been made. [15]

Related Research Articles

<span class="mw-page-title-main">MV Agusta</span> Italian motorcycle manufacturer and racing team

MV Agusta is a high end motorcycle manufacturer founded by Count Domenico Agusta on 19 January 1945 as one of the branches of the Agusta aircraft company near Milan in Cascina Costa, Italy. The abbreviation MV stands for Meccanica (mechanics) Verghera, the hamlet where the first MVs were made. The modern headquarters and main production facilities are located in Varese, Italy on the shore of Lake Varese.

<span class="mw-page-title-main">MV Agusta F4 series</span> Four-cylinder sport bike

The MV Agusta F4 is an inline four-cylinder sport bike made by MV Agusta from 1999 until 2018. It was the motorcycle that launched the resurrection of the brand in 1998. The F4 was created by motorcycle designer Massimo Tamburini at CRC, following his work on the Ducati 916. The F4 has a single-sided swingarm, large diameter front forks and traditional MV Agusta red and silver livery. The F4 engine is also one of the few production superbikes to have a hemi-spherical cylinder head chamber design with 4 valves per cylinder.

<span class="mw-page-title-main">MV Agusta Brutale series</span> Series of Italian naked motorcycles

The MV Agusta Brutale series of motorcycles are manufactured by MV Agusta of Italy, starting in 2001. Its style is classified as a naked bike and the series consists of several models powered by either inline-four or inline-three, DOHC-engines in various capacities.

<span class="mw-page-title-main">MV Agusta 350B</span> Type of motorcycle

The MV Agusta 350B (Bicilindrica) was a series of motorcycles produced by the Italian manufacturer MV Agusta from 1970 to 1974. The motorcycle was first introduced at the Milan motorcycle show in 1969. The introduction of the "350" model was intended to bridge the production gap of MV Agusta in the medium-displacement sector and to take advantage of the prestige gained by the dominant GP racers. It was produced in "Sport", "Gran Turismo" and "Scrambler" versions.

<span class="mw-page-title-main">MV Agusta 250 Monocilindrica Bialbero</span> Type of motorcycle

The MV Agusta 250 Monocilindrica Bialbero was a 250 cc factory racer manufactured by the Italian brand MV Agusta from 1956 to 1959. With this machine 15 GPs, 2 Driver Championships and 2 manufacturers World Championships were won.

<span class="mw-page-title-main">MV Agusta 250 Bicilindrica</span> 250 cc factory racer manufactured by the Italian brand MV Agusta

The MV Agusta 250 Bicilindrica was a 250 cc factory racing motorcycle manufactured by the Italian brand MV Agusta from 1957 to 1961. With this machine 11 GPs, 2 Driver Championships and 2 manufacturers World Championships were won.

<span class="mw-page-title-main">MV Agusta 175 series</span> Series of Italian motorcycles

The MV Agusta 175 were a series of motorcycles produced by the Italian manufacturer MV Agusta from 1953 to 1960. The series included touring, GT, sports and supersports models. There were also two racing variants. Because of the shape of the petrol tank, the sports and supersport models became known as the Disco Volante. The series was MV's best seller.

<span class="mw-page-title-main">MV Agusta 125 Bialbero</span> Italian motorcycle

The MV Agusta 125 Bialbero was a 125 cc factory racer from the Italian brand MV Agusta, which was used between 1950 and 1960. The machine won 34 GPs, 6 rider's championships and one manufacturer's championship. The machine also won 4 Italian Championships and 10 National Championships in other countries.

<span class="mw-page-title-main">MV Agusta Liberty</span> Light motorcycle built in Italy from 1962 to 1969

The MV Agusta 50 Liberty was a light motorcycle built in the MV Agusta factory in Cascina Costa di Samarate, Italy from 1962 to 1969.

<span class="mw-page-title-main">MV Agusta Rivale</span> Italian motorcycle

The MV Agusta Rivale is a motorcycle that was produced by the Italian manufacturer MV Agusta from 2013 to 2017.

<span class="mw-page-title-main">MV Agusta Superveloce</span> Italian retro racer styled motorcycle

The MV Agusta Superveloce is a retro racer styled motorcycle produced by the Italian motorcycle manufacturer MV Agusta in 2020. It is described by MV Agusta as "a modern interpretation of the iconic stylistic concept of the MV Agusta. A fusion of vintage and contemporary ensures that the future incorporates the memories of good times gone by".

<span class="mw-page-title-main">MV Agusta Dragster series</span> Series of Italian streetfighter motorcycles

The MV Agusta Dragster is a series of motorcycles produced by the Italian manufacturer MV Agusta. The bike is considered a streetfighter, or muscle bike, and is powered by an 800cc three-cylinder engine. Originally introduced in 2014 as the Brutale Dragster 800, part of the Brutale model lineup, the Dragster range was expanded and offered as its own series.

The MV Agusta RVS#1 is a limited-edition motorcycle produced by the Italian manufacturer MV Agusta. This machine is the first product of MV Agusta's “Reparto Veicoli Speciali” (RVS) department, and a reinterpretation of the MV Agusta Dragster. It is powered by a 150 bhp version of the company's 800 cc three-cylinder engine. The machines are all hand assembled and went on sale in 2019.

<span class="mw-page-title-main">MV Agusta 350 Ipotesi</span> Type of motorcycle

The MV Agusta 350 Ipotesi (Hypothesis) was a motorcycle produced by the Italian manufacturer MV Agusta from 1975 to 1977. The machine was conceived by Italian designer Giorgetto Giugiaro and based on the previous 350 B Sport Elettronica model. 1,991 "Sports" and 350 “Turismo” machines were produced.

<span class="mw-page-title-main">MV Agusta 125 Regolarità</span> Motorcycle model

The MV Agusta 125 Regolarità was a dual-sport motorcycle built from 1965 to 1970 by the Italian manufacturer MV Agusta at their Cascina Costa plant. Production was 63 machines, built in 2 batches; 46 in 1965 and 17 in 1969.

<span class="mw-page-title-main">Avello (motorcycle)</span>

Avello was a Spanish manufacturer of machine tools, motorcycles and scooters, famous for its MV Agusta and Puch brand machines. It was founded by Alfredo Avello in 1940 and closed in March 2013. The factory was in the city of Gijón in Asturias, northern Spain.

<span class="mw-page-title-main">MV Agusta 150 Sport RS</span> Type of motorcycle

The MV Agusta 150 Sport RS was a motorcycle produced by the Italian motorcycle MV Agusta in their Cascina Costa plant from 1959 to 1969.

<span class="mw-page-title-main">Magni (motorcycle)</span>

Magni is an Italian company that builds specialist motorcycles. The company is based in the city of Samarate in the province of Varese. Magni, in addition to building the bikes that bear its name, is also active in the construction of specials to order and a supplier of special parts for the restoration of MV Agusta classic motorcycles.

<span class="mw-page-title-main">MV Agusta Raid</span> Type of motorcycle

The MV Agusta Raid was a series of 250 and 300 cc motorcycles manufactured by the MV Agusta company in Cascina Costa, Italy from 1957 to 1961. At the time of introduction, the 250 cc class was considered a large capacity motorcycle.

The MV Agusta 250B (Bicilindrica) was a motorcycle produced by the Italian manufacturer MV Agusta from 1968 to 1971. The motorcycle was first introduced at the 1965 Milan EICMA motorcycle show and was based on the stillborn MV 166 Arno GT. The model was discontinued in 1971 following the introduction of an overbored version, the 350B.

References

  1. 1 2 3 "125 Pullman 2a". www.mvagustaoldtimers.nl. MVagusta-Oldtimers. Archived from the original on 24 April 2020. Retrieved 27 June 2019.
  2. 1 2 3 "125 Pullman 1a". www.mvagustaoldtimers.nl. MVagusta-Oldtimers. Archived from the original on 24 April 2020. Retrieved 27 June 2019.
  3. 1 2 3 4 "MV Agusta 125 Pullman". www.mv-agusta-club.de. MV Agusta Club Deutschland. Retrieved 27 June 2019.
  4. 1 2 "MV Agusta 125 Superpullman". www.mv-agusta-club.de. MV Agusta Club Deutschland. Retrieved 27 June 2019.
  5. 1 2 "MV Agusta 125 Pullman 1953". www.motoinfo.it. Retrieved 27 June 2019.
  6. 1 2 "125 Superpullman". www.mvagustaoldtimers.nl. MVagusta-Oldtimers. Archived from the original on 24 April 2020. Retrieved 27 June 2019.
  7. Colombo, Mario (1995). "La MV più popolare". Motociclismo d'Epoca (1).
  8. "La fabrica de SUZUKI en Gijon :: al norte". alnorte.webnode.es (in Spanish). Retrieved 18 August 2019.
  9. 1 2 "MV Agusta 125 Pullman" (in Italian). Moto d'epoca facile. 24 March 2010. Retrieved 27 June 2019.
  10. "Classic MV Agusta - 125 Pullman". thebikemuseum.com. The Bike Museum. Retrieved 27 June 2019.
  11. "The Boom Of The 50s". MV Agusta London. 29 October 2014. Retrieved 27 June 2019.
  12. "MV Agusta 125 Pullman". All About Italy. 29 June 2017. Retrieved 27 June 2019 via PressReader.
  13. "1957 MV Agusta 125cc Super Pullman Frame no. 904897 Engine no. 901925". www.bonhams.com. Bonhams. Retrieved 27 June 2019.
  14. Harmon, Paul (22 December 2018). "The MV Agusta single cylinder gems". retromotoplanet.com. Retro Moto Planet. Retrieved 27 June 2019.
  15. "1957 MV Agusta Super Pullman". Bike-urious. 5 January 2014. Retrieved 27 June 2019.