Manufacturer | MV Agusta |
---|---|
Predecessor | 1953-1960 |
Class | Touring GT (Gran Turismo) Sports Supersports Production racer Racer |
Engine | 175 cc Four-stroke single-cylinder |
The MV Agusta 175 were a series of motorcycles produced by the Italian manufacturer MV Agusta from 1953 to 1960. The series included touring, GT (Gran Turismo), sports and supersports models. There were also two racing variants. Because of the shape of the petrol tank, the sports and supersport models became known as the Disco Volante (Flying Saucer). [1] The series was MV's best seller. [2]
The MV Agusta 175 was launched at the EICMA (Milan Motorcycle Show) in 1952, [3] with production starting in 1953. For MV Agusta, this motorcycle was a milestone. It was their first production machine with a four-stroke engine. The unit construction single-cylinder engine was designed with an overhead camshaft for high performance. The chain-driven camshaft operated the valves via rocker arms, which were closed by hairpin valve springs. The engine was inclined forward at 10° and manufactured in alloy and a bore and stroke of 59.5 mm × 62 mm.
The cycle parts featured an advanced duplex frame that used the engine as a stressed member, telescopic forks, a swinging arm and full-width alloy hubs. [2]
The machine was initially available as a tourer, the 175 CST/CSTL, which produced 8 bhp (6.0 kW) at 5600 rpm. A sports model, the 175 CS, was soon introduced. This model featured a larger carburetor and produced 11 bhp (8.2 kW) at 6700 rpm, which put the machine above similar models from other manufacturers. [4] The 15 bhp supersport model, the MV Agusta 175 CSS, was introduced at the 1954 Milan Show [3] and, and, unlike the touring and sports versions, was fitted with Earles forks; it was priced at 280,000 lire.
A pushrod version of the engine was introduced in 1957. It was hoped that a simpler, cheaper model, albeit with less power, would appeal to a larger audience. Pushrod models had an AB suffix to the model designation. [5]
The 175 CST was one of the original models produced. This touring model had a frame of a double loop design using tubes for the front sections and pressed steel members at the real. Suspension was telescopic forks at the front and a swinging arm at the rear and the wheels were 17" diameter. Separate saddles were used for the rider and passenger. The 175 cc OHC engine produced 8 bhp (6.0 kW) at 5600 rpm, giving a top speed of 60 mph (100kmh). [6]
The 175 CSTL, also known as the Turismo Lusso, [7] was another touring model, but had larger, 19" wheels than the CST and a "long seat" (dualseat) fitted rather than separate saddles. [6]
The sports model 175 CS was introduced in 1953. It featured lower handlebars and a more sporty riding position. The engine featured a larger 22 mm carburettor and the engine produced 11 bhp (8.2 kW) at 6700 rpm, giving a 70 mph (110 km/h) top speed. About 4,500 examples of this model were made. [8]
The Italian motorcycle fans connected the shape of the fuel tank with a "vehicle from another galaxy", which gave the MV Agusta 175 CS its nickname, Disco Volante (Flying Saucer), which was also adopted in the model history of the manufacturer. [9]
The CS model was also produced under licence in Spain by Avello. [10]
An updated version on the 175 CS was introduced in 1957. The 175 CS 57 featured dynamo ignition and a revised exhaust. [11]
In July 1954, the supersport model 175 CSS was introduced. The engine was further turned from the CS model, including higher compression ratio and a larger carburettor, to produce 15 bhp (11 kW) @ 8,800 rpm. Cycle parts were the same as the CS model, except it was fitted with Earles forks. The petrol tank of the CS was retained, so this model was also known as the Disco Volante. [12] This is the rarest model of the series, only around 500 of this model was produced.
The 175 CSGT, also known as the Turismo Monoalbero, was only manufactured in 1957. It was an upscale GT (Gran Turismo) version of the CS model. Although the engine was from the CS, the cylinder head was from the CSTL model, which reduced power. [7]
Introduced in 1957, it was hoped that these simpler, cheaper models would appeal to a larger audience. [5] Various trim levels were offered: Economica, Turismo, America and America Lusso. [13] All used a pushrod version of the engine, which produced 8 bhp (6.0 kW) @ 5,200 rpm, giving a top speed of 60 mph (100kmh). [5]
An enlarged version of the 175 AB was introduced in 1959. [14] The pushrod engine's bore was increased to 69 mm to give a capacity of 232 cc. [15] Except for the colour of the petrol tank, visual differences between the 175 and 235 models were minimal. [16] Sales were slow as most buyers wanting a larger machine than 175 preferred the "full" 250 cc of the 250 Raid. Production stopped in 1961. [14]
A variant was also manufactured under licence in Spain by Avello, where it was marketed as the 235 Deva. [17]
The 175 cc Formula Sport Derivata race series was very popular in Italy. MV Agusta designed the 175 CSS-5V for this race series using the production engine. [18] The Squalo (shark), as it was generally known, had a lighter frame based on that used on the works racers, larger brakes, [19] a magneto, [18] Earles forks and a five-speed gearbox. [20] It was sold as an over the counter racer and riders such as Bob Keeler, Derek Minter and Mike Hailwood used the Squalo in national competitions. [21] [22] Hailwood won his first ever race on one of these machines bored out to 196 cc in a 200 cc class race at Oulton Park in 1957. [18] Around 200 of the model were manufactured between 1954 and 1957. [19]
A street version of the Squalo was offered fitted with headlights and mufflers. [4]
The 175 Bialbero was an enlarged version of the successful DOHC 125 Bialbero works racer. The bore was increased to 64 mm to give a capacity of 174 cc and had a power output of 25 bhp at 11,500 rpm. The machine was produced in response to Moto Morini and Mondial entering the 175 cc class with their racing machines. [23] [24]
The machine won 12 races in total, the first being by Carlo Ubbiali at the Circuit of Perugia on 22 August 1954. Umberto Masetti won the 175 cc Italian Championship in 1955 on a Bialbero. The machine was placed first and second in the 1957 Motogiro (Motorcycle Tour of Italy). [24]
MV Agusta 175 models | CST [6] [25] | CSTL [25] | CS [8] [26] CS 57 [11] | CSS [12] [27] | CSGT [7] | AB [5] [28] | CSS-5V [22] [29] | Bialbero [24] [30] | 235 Tevere [14] |
---|---|---|---|---|---|---|---|---|---|
Year | 1953-1957 | 1954-1958 | 1955-1958 | 1957 | 1957-1959 | 1954-1960 | 1954–1958 | 1959-1961 | |
Valvetrain | OHC | OHV | OHC | DOHC | OHV | ||||
Engine configuration | Four-stroke single-cylinder engine | ||||||||
Engine cooling | Air cooling | ||||||||
Bore | 59.5 mm | 63 mm | 69 mm | ||||||
Stroke | 62 mm | 56 mm | 62 mm | ||||||
Engine displacement | 172 cc | 174 cc | 232 cc | ||||||
Lubrication system | Wet sump | ||||||||
Carburetor | Dell'Orto 18 mm | Dell'Orto 22 mm | Dell'Orto 25 mm | Dell'Orto 20 mm | Dell'Orto 18 mm | Dell'Orto 25 mm | Dell'Orto 25 mm | ||
Compression ratio | 6.5:1 | 7:1 | 9:1 | 6.5:1 | 9:1 | 9.5:1 | 7.2:1 | ||
Max power | 8 bhp ( kW) @ 5,200 rpm | 11 bhp (8.2 kW) @ 6,700 rpm | 15 bhp (11 kW) @ 6,700 rpm | 8 bhp ( kW) @ 5,200 rpm | 16 bhp (12 kW) @ 8,800 rpm | 25 bhp (19 kW) @ 11,500 rpm | 13 bhp (9.7 kW) @ 5,500 rpm | ||
Top speed | 60 mph (100 kmh) | 70 mph (115 kmh) | 85 mph (135 kmh) | 60 mph (100 kmh) | 95 mph (150 kmh) | 110 mph (180 kmh) | 65 mph (105 kmh) | ||
Primary drive | Gears | ||||||||
Clutch | Wet multi-plate | ||||||||
Gears | 4 | 5 | 4 | ||||||
Final drive | Chain drive | ||||||||
Frame | Double cradle | ||||||||
Front forks | Telescopic forks | Earles forks | Telescopic forks | Earles forks | Telescopic forks | ||||
Rear forks | Swinging arm | ||||||||
Rear suspension | Coil springs with hydraulic shock absorbers | ||||||||
Brakes | Drum brakes | ||||||||
No. produced | 6,500 [31] | 9,500 [32] | 5,000 | 500 | 500 [33] | 6,000 [34] | Unknown | 1,000 [16] |
MV Agusta is a high end motorcycle manufacturer founded by Count Domenico Agusta on 19 January 1945 as one of the branches of the Agusta aircraft company near Milan in Cascina Costa, Italy. The abbreviation MV stands for Meccanica (mechanics) Verghera, the hamlet where the first MVs were made. The modern headquarters and main production facilities are located in Varese, Italy on the shore of Lake Varese.
The MV Agusta Brutale series of motorcycles are manufactured by MV Agusta of Italy, starting in 2001. Its style is classified as a naked bike and the series consists of several models powered by either inline-four or inline-three, DOHC-engines in various capacities.
The MV Agusta 350B (Bicilindrica) was a series of motorcycles produced by the Italian manufacturer MV Agusta from 1970 to 1974. The motorcycle was first introduced at the Milan motorcycle show in 1969. The introduction of the "350" model was intended to bridge the production gap of MV Agusta in the medium-displacement sector and to take advantage of the prestige gained by the dominant GP racers. It was produced in "Sport", "Gran Turismo" and "Scrambler" versions.
The MV Agusta 750 S also known as the MV Agusta 750 Sport, was a motorcycle manufactured by the MV Agusta company from 1970 to 1975. Production total of this model series was 583 machines.
The MV Agusta 350 6 cilindri was a prototype racing motorcycle built by the Varese company MV Agusta in 1957, for the 350 cc class of the FIM Motorcycle World Championship. The project was resurrected in 1968. Neither version was ever used in a race. The only surviving model is now in the MV Agusta factory museum.
The MV Agusta 250 Monocilindrica Bialbero was a 250 cc factory racer manufactured by the Italian brand MV Agusta from 1956 to 1959. With this machine 15 GPs, 2 Driver Championships and 2 manufacturers World Championships were won.
The MV Agusta 250 Bicilindrica was a 250 cc factory racing motorcycle manufactured by the Italian brand MV Agusta from 1957 to 1961. With this machine 11 GPs, 2 Driver Championships and 2 manufacturers World Championships were won.
The MV Agusta 203 Bialbero and MV Agusta 220 Bialbero were Italian factory racing motorcycles made by MV Agusta to compete in the 1955 250 cc World Motorcycle Racing Championship. The machine won three GPs and with it MV Agusta won that year's 250 cc Constructors Championship.
The MV Agusta 125 Bialbero was a 125 cc factory racer from the Italian brand MV Agusta, which was used between 1950 and 1960. The machine won 34 GPs, 6 rider's championships and one manufacturer's championship. The machine also won 4 Italian Championships and 10 National Championships in other countries.
The MV Agusta 50 Liberty was a light motorcycle built in the MV Agusta factory in Cascina Costa di Samarate, Italy from 1962 to 1969.
The MV Agusta 125 Pullman was a motorcycle produced by the Italian manufacturer MV Agusta from 1953 to 1956. The model achieved a good sales success, and had the highest production of any machine from MV Agusta. Many brought the bike as the only means of family transport or as a work vehicle. Despite the questionable aesthetics, the Pullman offered a comfortable ride, derived by the driving position, soft suspension and large section tires. This was particularly appreciated by users, so much so that they were imitated by some competitors. 27,000 machines of this model series were produced. The model was also produced under licence in Spain by Avello, where it was marketed as the MV Avello 125 Pullman Turismo.
The MV Agusta Superveloce is a retro racer styled motorcycle produced by the Italian motorcycle manufacturer MV Agusta in 2020. It is described by MV Agusta as "a modern interpretation of the iconic stylistic concept of the MV Agusta. A fusion of vintage and contemporary ensures that the future incorporates the memories of good times gone by".
The MV Agusta Dragster is a series of motorcycles produced by the Italian manufacturer MV Agusta. The bike is considered a streetfighter, or muscle bike, and is powered by an 800cc three-cylinder engine. Originally introduced in 2014 as the Brutale Dragster 800, part of the Brutale model lineup, the Dragster range was expanded and offered as its own series.
The MV Agusta RVS#1 is a limited-edition motorcycle produced by the Italian manufacturer MV Agusta. This machine is the first product of MV Agusta's “Reparto Veicoli Speciali” (RVS) department, and a reinterpretation of the MV Agusta Dragster. It is powered by a 150 bhp version of the company's 800 cc three-cylinder engine. The machines are all hand assembled and went on sale in 2019.
The MV Agusta 350 Ipotesi (Hypothesis) was a motorcycle produced by the Italian manufacturer MV Agusta from 1975 to 1977. The machine was conceived by Italian designer Giorgetto Giugiaro and based on the previous 350 B Sport Elettronica model. 1,991 "Sports" and 350 “Turismo” machines were produced.
The MV Agusta 125 Regolarità was a dual-sport motorcycle built from 1965 to 1970 by the Italian manufacturer MV Agusta at their Cascina Costa plant. Production was 63 machines, built in 2 batches; 46 in 1965 and 17 in 1969.
The MV Agusta 125 Sport SE was a sport motorcycle built from 1975 to 1977 by the Italian manufacturer MV Agusta. It was one of the last models to be produced by Meccanica Verghera at their Cascina Costa plant.
The MV Agusta 150 Sport RS was a motorcycle produced by the Italian motorcycle MV Agusta in their Cascina Costa plant from 1959 to 1969.
The MV Agusta Raid was a series of 250 and 300 cc motorcycles manufactured by the MV Agusta company in Cascina Costa, Italy from 1957 to 1961. At the time of introduction, the 250 cc class was considered a large capacity motorcycle.
The MV Agusta 250B (Bicilindrica) was a motorcycle produced by the Italian manufacturer MV Agusta from 1968 to 1971. The motorcycle was first introduced at the 1965 Milan EICMA motorcycle show and was based on the stillborn MV 166 Arno GT. The model was discontinued in 1971 following the introduction of an overbored version, the 350B.