Harley-Davidson Hummer

Last updated
Unrestored Harley-Davidson Hummer Harley-Davidson Hummer.jpg
Unrestored Harley-Davidson Hummer

The Hummer was a motorcycle model manufactured by Harley-Davidson from 1955 to 1959. However, the name "Hummer" is now incorrectly used generically to refer to all American-made single-cylinder two-stroke Harley-Davidson motorcycles manufactured from 1948 to 1966. [1] These motorcycles were based on the DKW RT125, the drawings for which were taken from Germany as war reparations after World War II. [2] The RT125 drawings were also given to the United Kingdom and the Soviet Union as war reparations, resulting in the BSA Bantam [3] and the MMZ M-1A Moskva, later known as the Minsk. [4]

Contents

Model S-125 (1948–1952)

Harley-Davidson Model 125
Manufacturer Harley-Davidson Motor Company
Also called"Hummer" (current usage), "American Lightweight"
Parent company Harley-Davidson Inc.
Production31,793
Assembly Milwaukee, Wisconsin, USA
SuccessorModel 165
Class economy
Engine single-cylinder two stroke 125 cc
Bore / stroke 2.06 in × 2.28 in (52 mm × 58 mm) [5] [6]
Compression ratio 6.6:1 [5] [6]
Top speed50 mph (80 km/h) [7]
Power 3 hp (2.2 kW) [5] [8]
Transmission 3-speed foot shift [5] [8]
Suspension Front: girder with rubber springs
Rear: rigid [7] [8]
Brakes Front and rear drums [8]
Tires 3.25" x 19" [7] [6]
Wheelbase 50 in (1,300 mm) [5] [6]
Weight170 lb (dry)
Fuel capacity1.75 US gal (6.6 L), including 1 US qt (0.95 L) reserve [6]
RelatedModel 165
Hummer
Super 10
Topper
Ranger
Pacer
Scat
Bobcat

The Model 125 [9] or S-125 [6] [10] was introduced by Harley-Davidson in 1947 as a 1948 model. [10] The 125 cc two-stroke engine produced three horsepower, which was sent through a three-speed foot-shift transmission. [8] The front suspension used girder forks suspended by large rubber bands, which proved to be problematic because they broke and were unavailable from H.D. after the early 1960s.

A two-man seat was an available option, but proved to be unpopular likely because the machine was underpowered for two.

Like most vehicles at the time, the 1949 model was six volt and had a bulb and reflector headlight assembly.

Ten thousand Model S-125s were sold during the first seven months of 1947. [8] [6] Despite largely being ignored by dealers, the 125 gained a large following among young riders, many of whom would go on to ride larger motorcycles. [7]

The rubber-band front suspension was replaced in 1951 by a telescopic fork referred to as "Tele-Glide". [1] [8]

Model 165 (1953–1959)

The Model 165 replaced the S-125 in 1953. The engine was increased in size to 165 cc.

Hummer (1955–1959)

A 1955 Model B "Hummer" at the Harley-Davidson Museum Harley-Davidson Museum May 2024 02 (Challenge and Opportunity--1955 Model B 'Hummer'--Two-Cycle Single).jpg
A 1955 Model B "Hummer" at the Harley-Davidson Museum

The Hummer was added to Harley-Davidson's model line in 1955. It was a stripped-down basic model using a redesigned "B-model" engine with the old 125 cc capacity. It was named after Dean Hummer, a Harley dealer in Omaha, Nebraska who led national Harley two-stroke sales. [2]

The Hummer was as basic as it could have been. It had magneto ignition and was sold without battery, electric horn, turn signals, or brake light. [1]

Super 10 (1960–1961)

The Model 165 and the Hummer were both replaced by the Super 10 in 1960. The Super 10 used a 165 cc version of the "B-model" engine previously used in 125 cc form in the Hummer.

Ranger (1962)

The Ranger was an off-road Harley-Davidson motorcycle without lights, made only in 1962. [11] It had an extra-low final-drive ratio of 7.0:1 (12-tooth countershaft gear and 84-tooth rear sprocket) with neither lighting system nor front fender. It is believed to have been built to consume their supply of 165 cc engines, which would not be needed for their other models. [12]

Pacer (1962–1965)

The Pacer was the replacement for the Super-10. It used the newly enlarged 175 cc B-model engine.

In 1963, one year into production, the frame of the Pacer was heavily redesigned. The new frame incorporated rear suspension through an L-shaped swingarm that actuated a spring mounted horizontally under the engine. [13] [14] The seat and rear fender were supported on a subframe bolted to the main frame. [14]

Scat (1962–1965)

The Scat was a dual-purpose motorcycle based on the Pacer. It had a high-mounted front fender, high handlebars, softer springs supporting the seat, a "scrambler"-style high-mounted exhaust pipe, and street-legal off-road tyres. The extra-low final-drive ratio of the Ranger was available on the Scat as an option. The Scat also received the Pacer's new frame in 1963. [12]

Bobcat (1966)

The Bobcat was the last of the RT125-based Harleys and the only one offered in 1966, its only year in production. [15] Based on the '63-'65 Pacer frame, it had ABS resin bodywork moulded in one piece that covered the tank and the rear tire and supported the seat. [16] It was the only RT125-based Harley with a standard dual seat. [17]

See also

Notes

  1. 1 2 3 "Harley Hummer . Com". Harley Hummer. Archived from the original on 19 December 2014. Retrieved 24 December 2014.
  2. 1 2 "Hummer History". The Harley Hummer Club. 17 May 2010. Archived from the original on 2 November 2013. Retrieved 24 December 2014.
  3. Wilson 1995, p. 37.
  4. Wilson 1995, p. 305.
  5. 1 2 3 4 5 Rafferty 2001, p. 130.
  6. 1 2 3 4 5 6 7 Wright 1987, p. 71.
  7. 1 2 3 4 Rafferty 2001, pp. 130–133.
  8. 1 2 3 4 5 6 7 Mitchel 1997, p. 62.
  9. Harley-Davidson, Inc., "The Legend Begins", 1993
  10. 1 2 Mitchel, D. "Harley-Davidson Chronicle - An American Original",1997, p. 142
  11. Wright 1987, p. 85.
  12. 1 2 "Chapter 6 - THE NEW and THE OLD". Harley Hummer Club. Archived from the original on 7 February 2012.
  13. References:
  14. 1 2 "Restore Chapter 48 1963 Pacer The Legend Begins". Harley Hummer Club. 2 March 2006. Archived from the original on 7 February 2012.
  15. Field 2002, p. 113.
  16. Wilson 1995, p. 74.
  17. "Restore Chapter 65 Seats". 12 November 2010. Archived from the original on 27 September 2011. Retrieved 24 December 2014.

Related Research Articles

<span class="mw-page-title-main">Harley-Davidson</span> American motorcycle manufacturer

Harley-Davidson, Inc. is an American motorcycle manufacturer headquartered in Milwaukee, Wisconsin, United States. Founded in 1903, it is one of two major American motorcycle manufacturers to survive the Great Depression along with its historical rival, Indian Motorcycles. The company has survived numerous ownership arrangements, subsidiary arrangements, periods of poor economic health and product quality, and intense global competition to become one of the world's largest motorcycle manufacturers and an iconic brand widely known for its loyal following. There are owner clubs and events worldwide, as well as a company-sponsored, brand-focused museum.

<span class="mw-page-title-main">Indian Motorcycle</span> Motorcycle marque

Indian Motorcycle is an American brand of motorcycles owned and produced by American automotive manufacturer Polaris Inc.

<span class="mw-page-title-main">Harley-Davidson Sportster</span> Type of motorcycle

The Harley-Davidson Sportster is a line of motorcycles produced continuously since 1957 by Harley-Davidson. Sportster models are designated in Harley-Davidson's product code by beginning with "XL". In 1952, the predecessors to the Sportster, the Model K Sport and Sport Solo motorcycles, were introduced. These models K, KK, KH, and KHK of 1952 to 1956 had a sidevalve engine, whereas the later XL Sportster models use an overhead valve engine. The first Sportster in 1957 had many of the same features of the KH including the frame, fenders, large gas tank and front suspension.

<span class="mw-page-title-main">Ner-A-Car</span> Type of motorcycle

The Ner-A-Car was a type of feet forwards motorcycle designed by Carl Neracher in 1918. It used an unusual steel-channel chassis, much like an automobile, and hub-center steering at the front wheel, making it 'nearly a car' in design. The Ner-A-Car was the most successful hub-center steering motorcycle ever produced, with sales far eclipsing earlier or later examples of this design, such as the Yamaha GTS1000 or Bimota Tesi. About 10,000 Neracars were manufactured in the United States by the Ner-A-Car Corporation, while around 6,500 are believed to have been produced in England under licence by the Sheffield-Simplex company between 1921 and 1926 under the Ner-A-Car name.

<span class="mw-page-title-main">Unit construction</span>

Unit construction is the design of larger motorcycles where the engine and gearbox components share a single casing. This sometimes includes the design of automobile engines and was often loosely applied to motorcycles with rather different internal layouts such as the flat twin BMW models.

<span class="mw-page-title-main">Douglas (motorcycles)</span> British motorcycle manufacturer

Douglas was a British motorcycle manufacturer from 1907 to 1957 based in Kingswood, Bristol, owned by the Douglas family, and especially known for its horizontally opposed twin cylinder engined bikes and as manufacturers of speedway machines. The company also built a range of cars between 1913 and 1922.

The history of the motorcycle begins in the second half of the 19th century. Motorcycles are descended from the "safety bicycle," a bicycle with front and rear wheels of the same size and a pedal crank mechanism to drive the rear wheel. Despite some early landmarks in its development, the motorcycle lacks a rigid pedigree that can be traced back to a single idea or machine. Instead, the idea seems to have occurred to numerous engineers and inventors around Europe at around the same time.

<span class="mw-page-title-main">Harley-Davidson FL</span> HD FL 1200 Lowrider

Harley-Davidson FL is a model designation used for Harley-Davidson motorcycles since 1941, when F referred to the new large capacity 74 cui (1200cc) variant of the V-2 Overhead valve engine (″Knucklehead″) that was introduced in 1936 as Model E with 61 cui (1000cc). The presence of an additional letter L indicated higher compression, offering more power but requiring higher octane gasoline. In 1950s, the low compression version was discontinued, and in 1952 also the low capacity EL, making FL the standard engine and model designation for decades to come.

The Harley-Davidson Super Glide was a motorcycle made by the Harley-Davidson. Reputed to be the first factory custom motorcycle, it originated Harley-Davidson's FX series of motorcycles by mating Sportster components, most notably the front end, with the chassis of their larger big twin motorcycles. Super Glide models from 1991 to 2018 were based on the Dyna Glide chassis which has a wider variety of front ends and trim levels, and for a time filled the intermediate niche between the smallest and largest Harley-Davidson models; the Dyna platform has since been discontinued for the 2018 model year in favor of the new Softail frame, with some models from the Dyna nameplate being carried over to the Softail line.

<span class="mw-page-title-main">Excelsior Super X</span> Forty-five cubic inch motorcycle

The Excelsior Super X was a motorcycle manufactured by the Excelsior Motor Manufacturing & Supply Company from 1925 to 1931. It was the most famous Excelsior motorcycle manufactured by that company and was the first American forty-five cubic inch motorcycle.

<span class="mw-page-title-main">Harley-Davidson Servi-Car</span> Motorcycle manufactured by Harley-Davidson

The Harley-Davidson Servi-Car is a three-wheeled utility motorcycle that was manufactured by Harley-Davidson from 1932 to 1973.

<span class="mw-page-title-main">Harley-Davidson Topper</span> Type of motorcycle

The Harley-Davidson Topper was the only motor scooter that the Harley-Davidson Motor Company ever produced.

<span class="mw-page-title-main">Indian 841</span> Type of motorcycle

The Indian 841 was a motorcycle designed by the Indian Motocycle Manufacturing Co. for desert warfare. It pioneered the drivetrain configuration later popularized by Moto Guzzi, having a longitudinally mounted air-cooled 90-degree V-twin with shaft drive to the rear wheel.

<span class="mw-page-title-main">Harley-Davidson VRSC</span> Harley-Davidson cruiser motorcycle

The Harley-Davidson VRSC, or V-Rod, is a line of V-twin cruiser motorcycles made by Harley-Davidson from 2002 until 2017. They are often called muscle bikes for their relatively high power output. The V-Rods are the first street motorcycles made by Harley-Davidson with overhead camshafts and liquid cooling.

<span class="mw-page-title-main">Indian Scout (motorcycle)</span> Motorcycle

The Indian Scout is a motorcycle built by the Indian Motocycle Company from 1920 to 1949. It rivaled the Chief as Indian's most important model. The 101 Scout, made from 1928 to 1931, has been called the best motorcycle Indian ever made. A second line of Scouts, with heavier frames, was introduced in 1932 alongside the Standard Scout, which replaced the 101 Scout and shared its frame with the Chief and the Four. The small-displacement Scout and the Sport Scout, introduced in 1934, were continued until the end of civilian production in 1942. Military versions of both models were used by US and other Allied forces during World War II.

<span class="mw-page-title-main">Indian Chief (motorcycle)</span> Type of motorcycle

The Indian Chief is a motorcycle that was built by the Hendee Manufacturing Company and the subsequent Indian Motocycle Company from 1922 to the end of the company's production in 1953, and again from 1999 to present.The Chief was Indian's "big twin", a larger, more powerful motorcycle than the more agile Scout used in competition and sport riding.

<span class="mw-page-title-main">Cleveland Motorcycle Manufacturing Company</span> Former American motorcycle manufacturer

The Cleveland Motorcycle Manufacturing Company, sometimes called Cleveland Motorcycle, was a motorcycle manufacturer in Cleveland, Ohio, from 1902 to 1905 and again from 1915 to 1929.

<span class="mw-page-title-main">Harley-Davidson Model W</span> Type of motorcycle

The Harley-Davidson Model W, also known as the Sport Twin, is a motorcycle made by Harley-Davidson from 1919 to 1923. Unusually for a Harley-Davidson motorcycle, the Model W had a flat-twin engine and a trailing link fork. The Model W set speed records on runs from New York City to Chicago and from the Canada–United States border to the Mexico–United States border. Slow home market sales led to the end of production after four years.

<span class="mw-page-title-main">Harley-Davidson Baja 100</span> Type of motorcycle

The Harley-Davidson Baja 100 was a small displacement off-road motorcycle made for Harley-Davidson in Italy by Aermacchi, which was 50% owned by Harley-Davidson at the time. It was one of Harley-Davidson's attempts to enter the small displacement off-road motorcycle market. It was built in Aermacchi's Varese, Italy factory.

<span class="mw-page-title-main">Harley-Davidson Fat Boy</span> V-twin softail cruiser motorcycle with solid-cast disc wheels

The Harley-Davidson Fat Boy, is a V-twin softail cruiser motorcycle with solid-cast disc wheels. Designed by Willie G. Davidson and Louie Netz, Harley-Davidson built a prototype Fat Boy in Milwaukee for the Daytona Bike Week rally at Daytona Beach in 1988 and 1989. Fat Boys produced from 1990-2017 are coded FLSTF, and FLFB from 2018.

References