IAR-16

Last updated
IAR 16
IAR 16.png
RoleSingle-seat fighter
National origin Romania
Manufacturer Industria Aeronautică Română (IAR)
Designer Elie Carafoli
First flight1934
Number built1

The IAR 16 was a low-wing monoplane fighter designed in Romania in 1934.

Contents

Development

Developed in parallel with the I.A.R. 15, the model '16' featured for the first time an all-metal airframe structure, covered with duralumin sheets, plywood and fabric. It resembled the I.A.R. 14 more closely than the I.A.R. 15, being inferior to the latter. The fuselage outlines followed the '14's, as did the wings, although their area was increased to 20.30 m2. The tail section, as usual, was redesigned, the rear part this time becoming rounded. The two-strut undercarriage of the I.A.R. 14 was retained as well, and the tailskid appeared again. A new British radial engine, the Bristol Mercury IV S2, of maximum 560 h.p. (418 kW) output at 4,500 m, was experimented with. The powerplant was covered with a narrow Townend ring and individual exhaust pipes were fitted to each of the nine cylinders. The typical feature of this model was a large propeller cone fitted to a Bristol-made two-blade wooden airscrew. Due to the larger wings and all-metal fuselage structure the empty weight increased to 1,430 kg, giving a relatively high, 70.14 kg/m2 wing load, that increased further during flight, taking also into consideration that the all-up weight was 1,650 kg. The usual armament, comprising two 7.7 mm Vickers machine guns, featured on all early I.A.R. fighters, was employed, this time placed in the wings and firing outside the propeller arc. The British engine offered an impressive maximum speed of 342 km/h at 5,000 m that could be reached in 6 ½ minutes, while the ceiling was established at 10,000 m.

Operational history

The I.A.R. 16, first flown in 1934, remained in prototype stage. Its only significant achievement was the improvement of Romania's national altitude record. Piloted by Locotenent aviator Papana, on 16 July 1935, the I.A.R. 16, featuring an enclosed cockpit, took off from Pipera airfield at 17.48 p.m. 47 minutes later it established a new altitude of 11,631 m (at that time, the world altitude record was held by the Italian Cdr. R. Donati, who reached 14,433 m on 11 April 1934, while flying a Caproni 161), beating the previous 10,518 m set up by the late Romeo Popescu. The prototype was still seen in 1935-1936 at various air shows, where Alex. Papana performed high-level aerobatics to the delight of the spectators.

Operators

Flag of Romania.svg  Romania

Specifications


Data from [1]

General characteristics

Performance

Armament

Related Research Articles

<span class="mw-page-title-main">Bloch MB.170</span> 1938 bomber aircraft family by Avion Marcel Bloch

The Bloch MB.170 and its derivatives were French reconnaissance bombers designed and built shortly before the Second World War. They were the best aircraft of this type available to the Armée de l'Air at the outbreak of the war, with speed, altitude and manoeuvrability that allowed them to evade interception by the German fighters. Although the aircraft could have been in service by 1937, debate over what role to give the aircraft delayed deliveries until 1940.

<span class="mw-page-title-main">IAR 14</span> Romanian fighter and trainer aircraft

The IAR 14 is a Romanian low-wing monoplane fighter-trainer aircraft designed before World War II.

<span class="mw-page-title-main">Yokosuka R2Y</span> Japanese WWII prototype aircraft

The Yokosuka R2Y Keiun was a prototype reconnaissance aircraft built in Japan late in World War II.

<span class="mw-page-title-main">Farman F.220</span> 1932 bomber aircraft family by Farman

The Farman F.220 and its derivatives were thick-sectioned, high-winged, four engined French monoplanes from Farman Aviation Works. Based on the push-pull configuration proven by the F.211, design started in August 1925 and the first flight of the prototype was on 26 May 1932. The largest bomber to serve in France between the two world wars was the final F.222 variant. One variation was intended to be an airliner.

<span class="mw-page-title-main">Salmson 2</span>

The Salmson 2 A.2, was a French biplane reconnaissance aircraft developed and produced by Salmson to a 1916 requirement. Along with the Breguet 14, it was the main reconnaissance aircraft of the French army in 1918 and was also used by American Expeditionary Force aviation units. At the end of the First World War, one-third of French reconnaissance aircraft were Salmson 2s.

The Arsenal VB 10 was a French fighter-interceptor aircraft developed during and shortly after World War II. It was a low-wing monoplane with retractable tailwheel undercarriage and of largely orthodox configuration. The ultimate product of a design that began with the Arsenal VG 10 prior to the war, the VB 10 added a second engine behind the cockpit which drove a second propeller, coaxial with and contra-rotating to the propeller driven by the engine in the nose.

<span class="mw-page-title-main">Morane-Saulnier M.S.225</span>

The Morane-Saulnier M.S.225 was a French fighter aircraft of the 1930s. It was produced in limited quantities to be used as a transitional aircraft between the last of the biplanes and the first monoplane fighters.

<span class="mw-page-title-main">Caudron C.690</span> Type of aircraft

The Caudron C.690 was a single-seat training aircraft developed in France in the late 1930s to train fighter pilots to handle high-performance aircraft. It was a conventional low-wing cantilever monoplane that bore a strong resemblance to designer Marcel Riffard's racer designs of the same period. Caudron attempted to attract overseas sales for the aircraft, but this resulted in orders for only two machines - one from Japan, and the other from the USSR. In the meantime, the first of two prototypes was destroyed in a crash that killed René Paulhan, Caudron's chief test pilot.

<span class="mw-page-title-main">Potez 53</span> Racing aircraft

The Potez 53 was a French low-wing enclosed cockpit single-seat cantilever monoplane racing aircraft built by Potez to specifically to compete in the 1933 Coupe Deutsch de la Meurthe race, which it won outright.

<span class="mw-page-title-main">IAR-15</span> Romanian fighter prototype

The IAR 15 was a low-wing monoplane fighter designed in Romania in 1933. Designed by Elie Carafoli for the Romanian Air Force, the IAR 15 was a lightly armed low-wing cantilever monoplane with a radial engine, fixed undercarriage and open cockpit.

<span class="mw-page-title-main">Potez 75</span> French ground-attack aircraft prototype

The Potez 75 was a low-cost, simple, ground-support, observation and launch aircraft for anti-tank missiles, designed and built in the early 1950s, for use in colonial conflicts. One hundred and fifteen were ordered in 1956, but cancelled in 1957.

<span class="mw-page-title-main">Dewoitine D.513</span> Type of aircraft

The Dewoitine D.513 was a 1930s prototype French monoplane fighter designed and built by Dewoitine.

The IAR 12 is a Romanian low-wing monoplane fighter-trainer aircraft designed before World War II.

The IAR 13 is a Romanian low-wing monoplane fighter-trainer aircraft designed before World War II.

<span class="mw-page-title-main">Loire 250</span> French 1935 prototype fighter plane

The Loire 250 was a French single-seat fighter monoplane designed and built by Loire Aviation of St. Nazaire.

The Arsenal-Delanne 10 was an experimental fighter aircraft of French origin. The plane had a rear cockpit and a distinctive tandem wing.

<span class="mw-page-title-main">Lévy-Biche LB.2</span> Type of aircraft

The Levy Biche LB.2 was a single seat French sesquiplane fighter aircraft designed to be used from aircraft carriers. With a watertight fuselage, jettisonable wheeled undercarriage and small under-wing floats, it could survive emergency sea touchdowns; it could also be fitted with seaplane type floats.

<span class="mw-page-title-main">Potez-CAMS 161</span> 1940s French flying boat airliner

The Potez-CAMS 161 was a large, French six-engined flying boat airliner, designed to operate on the North Atlantic routes that were opening up in the late 1930s. Its development was almost halted by World War II. Just one was built and partially tested before its destruction by Allied forces near the war's end.

<span class="mw-page-title-main">SNCAC NC.1070</span> Type of aircraft

The SNCAC NC.1070 was a piston engined attack and torpedo bomber designed and built in France shortly after World War II. The second prototype, the NC1071, was the first French multi-jet turbine powered aircraft.

<span class="mw-page-title-main">Kellner-Béchereau E.60</span> Type of aircraft

The Kellner-Béchereau E.60 was a prototype single-engine, single-seat training aircraft, designed in France in the late 1930s. It was a monoplane with a novel "double" wing, the rear part providing lift and lateral control as well as acting as slotted flaps.

References

  1. Grey 1972, pp. 230–231c.

Bibliography