LB&SCR K class

Last updated

London Brighton and South Coast Railway K class
LBSCR K class.jpg
K class No. 337 as built
Type and origin
Power typeSteam
Designer L. B. Billinton
Builder Brighton Works
Build date1913–1921
Total produced17 (completed)
3 (abandoned, partially built)
Specifications
Configuration:
   Whyte 2-6-0
   UIC 1'C
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Leading dia. 3 ft 6 in (1.067 m)
Driver dia.5 ft 6 in (1.676 m)
Wheelbase 23 ft 9 in (7.24 m)
Length57 ft 10 in (17.63 m)
Total weight105 long tons 5 cwt or 106.9 t or 117.9 short tons full
Fuel typeCoal
Fuel capacity4 LT or 4.1 t or 640.0 st
Water cap.3,940 imp gal (17,911.59 L; 4,731.74 US gal)
Firebox:
  Grate area24.8 sq ft (2.30 m2)
Boiler pressure170 psi (1.17 MPa)
Heating surface:
  Tubes1,155 sq ft (107.30 m2)
  Total surface1,573 sq ft (146.14 m2)
SuperheaterRobinson
Cylinders Two, outside
Cylinder size 21 in × 26 in (533 mm × 660 mm)
Valve type Piston
Valve travel4 in (101.60 mm)
Performance figures
Tractive effort 25,104 lbf (111.7 kN)
Career
Operators London, Brighton and South Coast Railway, Southern Railway, British Railways
Class K
Power class BR: 4P/5F
NumbersLBSCR: 337–353
SR: B337–B353 (later 2337–2353)
BR: 32337–32353
Locale Southern Region
First runFebruary 1913
WithdrawnNovember–December 1962
DispositionAll scrapped

The LB&SCR K class were powerful 2-6-0 mixed traffic locomotives designed by L. B. Billinton for the London, Brighton and South Coast Railway (LB&SCR) in 1913. They appeared shortly before the First World War and the first ten examples of the class did prodigious work during that conflict on munitions, supply and troop trains. Further examples were built after the war, and the class was used as a test bed for various items of specialised equipment. However, after the formation of the Southern Railway in 1923 the remaining three locomotives on order were not completed and the seventeen members of the class led relatively quiet yet reliable lives over their traditional lines. The locomotives proved their usefulness once again during the Second World War, and continued to provide reliable service until the 1960s. The entire class was eventually withdrawn in 1962 for 'bookkeeping' rather than 'operational' reasons.

Contents

Background

Due to the nature of its traffic, the LB&SCR had relatively limited need of heavy freight locomotives. However, those it did have had to be able to accelerate quickly from sidings and signals and maintain a good speed if they were not going to impede the intensive use of the lines for passenger traffic, particularly in the London suburbs. This issue became increasingly problematic after about 1910, as more and more suburban lines were electrified. The rebuilding of Robert Billinton's C2 class with larger boilers by D. E. Marsh solved this problem for a few years, but traffic continued to grow and by 1913 these were occasionally being double-headed. A larger and more powerful design was required for the heaviest freight trains, [1] whilst there was also a continuing need for larger passenger locomotives, especially during the summer months. L. B. Billinton therefore ordered from Brighton railway works five powerful mixed-traffic locomotives which could cope with both types of load.

Design

The new 'K' class incorporated several innovations for the LB&SCR. They were the first 2-6-0 locomotives to run on the railway, and the first class to have a Belpaire firebox. [2] They were fitted with Robinson style superheaters within a parallel boiler and two large inclined outside cylinders with inside Stephenson valve gear. The boilers were fed by hot water injectors, operated by a Weir pump, and surplus steam fed back to the tenders to preheat the water. The tenders were the largest of any LB&SCR locomotive with a capacity of 3,940 gallons of water and 4 tons of coal. The class was also fitted with steam sanding and steam carriage heating equipment enabling them to be used on passenger trains. [3]

Construction and use

The first two examples, numbers 337 and 338, appeared in traffic in September and December 1913, and were thoroughly tested at Brighton motive power depot. Modifications were made to the suspension of the pony truck and to the smokebox layout before three further examples (Nos. 339-341) with slightly larger smokeboxes were built between March and September 1914. [4] The design was quickly judged to be successful and a further five were ordered, but due to the difficulties of obtaining materials during World War I they did not appear in traffic until late 1916. The last two locomotives were fitted with Billinton's own 'top feed' system which provided a moderate increase in performance and so the remainder of the class was gradually fitted with the equipment as they passed through the workshops. [5]

The original ten locomotives proved to be extremely useful during the First World War, hauling heavy munitions and military supply trains from the marshalling yard at Three Bridges to Newhaven or Littlehampton harbours. Up to sixty supply trains a day were being handled by these two ports. [6] Locomotives in the class were capable of hauling trains of up to 1,000 tons at 30-35 mph, [7] but were equally useful when hauling troop trains. [8] The railway would have liked to have added to their number, but wartime restrictions on locomotive building prevented this. [2]

Billinton considered designing a 2-6-2 tank locomotive 'K2' or 'N' version after the war, but this idea was dropped following discussions with the railway's Civil Engineer, who objected to the longer wheelbase necessary, together with the discovery that the tank engine version would only be able to carry 2,000 gallons of water. [9] Therefore, a further ten locomotives of the original design were ordered from Brighton works. Seven of these (nos. 347-353) appeared in traffic between December 1920 and March 1921. [10] Progress on the remaining three locomotives was delayed due to the long backlog of repairs at Brighton works, and eventually a decision about their completion was deferred until after the imminent grouping of the railways of southern England to form the Southern Railway in January 1923. Ultimately, they were never completed.

Variants

During the last years of the LB&SCR, Billinton used members of the class to test various items of specialised equipment, most of which later proved to give limited advantage in return for higher fuel consumption or maintenance costs. In April 1921, the smokebox of No. 351 was extended to fit a 'Lewis Draft Appliance', which was removed in 1927. In March 1922, Nos. 341 and 342 were experimentally fitted with an early version of the Kylala variable blastpipe. One locomotive appeared to perform better as a result and the other worse, and so the experiment was discontinued. Between May 1922 and December 1923, No. 340 had a Worthington-Simpson feed-water heater and pump. [11] Finally in February 1923, No. 341 was fitted with 'Lamberts wet sanding gear' but this equipment was removed in 1931 after it was found to cause additional wear on the driving wheels. [12]

Post-grouping

No. 2339 at Brighton Locomotive Depot 23 March 1946. Brighton Locomotive Depot K Class geograph-2979048-by-Ben-Brooksbank.jpg
No. 2339 at Brighton Locomotive Depot 23 March 1946.

The class was initially renumbered by means of adding the prefix, 'B' to the original number, and later by adding 2000 to the LB&SCR number. They spent the first six years of Southern Railway ownership largely restricted to the lines of the Central Section, as the LB&SCR previously had a more generous loading gauge than the other main constituent companies. However, between 1929 and the summer of 1939 all the members of the class were altered to the composite gauge by reducing the height of their chimneys, flattening the dome and reducing the cab roofs, as they passed through the works. [11]

During the spring of 1924, the class was compared with other classes of heavy freight locomotives operated by the constituent companies. They were found to be capable and reliable but more expensive to run than the alternative Maunsell N and Urie S15 classes and so no more were built. [13] This may have been a false economy since many of the 'N' class ultimately had to undergo expensive rebuilding of their frames and the replacement of their cylinders, whereas members of the 'K' class remained in sound working order throughout their working lives. [14]

The seventeen examples spent most of their careers between the two World Wars working on both freight and passenger duties over their traditional routes, although there was less need for the latter following the electrification of the Brighton Main Line in 1933. However, the class once again came into its own during the Second World War when the locomotives were again used on heavy freight and troop trains throughout the Southern Railway, [15] especially in the lead up to the D-day landings in 1944.

British Railways

32353 at Horsham October 1962 Horsham RCTS Sussex Rail Tour geograph-2683937-by-Ben-Brooksbank.jpg
32353 at Horsham October 1962

All of the class were in good working order at the time of the nationalisation of the British Railways in 1948, and continued to be well maintained until the latter half of 1961. They were renumbered by adding 30000 to the SR number. Between 1949 and 1953 the feedwater heating was replaced by cold water injection, for reasons of cost, and latterly many examples were fitted with Automatic Warning System equipment, and water treatment equipment. With the reduction in freight traffic, they began to be also used on secondary services. However, after the summer of 1956 the class also acquired one prestige passenger duty on the Newhaven boat-trains, following the withdrawal of the 'Marsh Atlantics'. [14]

Accidents and incidents

On 3 March 1954, No. 32346 derailed at the catch points near Forest Row and landed on its left side at the embankment. [16]

Withdrawal

The locomotives were all still providing good reliable service when the class was withdrawn en-bloc during November and December 1962, apparently as part of an accountancy exercise 'to keep in line with the Southern Regions' withdrawal programme'. [17] Most spent several months in store at Hove railway station before being broken up, and at least one had to be briefly resurrected to help run breakdown trains during the severe Winter of 1962–1963 in the United Kingdom. [18] The early Bluebell Railway had hoped to purchase one example for preservation, but could not afford to do so since the time when they were available coincided with the years when all money had to be channelled into the purchase of the freehold of the line. [19] [20]

Model

Lawson Billinton considered the 'K' class to be his finest design, and during his retirement he constructed a one-sixth size working model from the original drawings. This was last sold in 2003 for a price in the £40-£50,000 range. [21]

Assessment

Members of the 'K' class were considered the best mixed-traffic locomotives produced by the LB&SCR, [22] but they never achieved the fame of the earlier passenger or tank engine classes of that railway and they had little impact on future Southern Railway locomotive design. It was only during the two World Wars that they were given the opportunity to show their true potential.

Locomotive summary

K class locomotive fleet summary
LBSC No.1st SR No.2nd SR No.BR No.Date BuiltDate WithdrawnImage
337B337233732337September 1913December 1962 LB&SCR K class No. 337.jpg
338B338233832338December 1913December 1962
339B339233932339March 1914November 1962 Farnborough Air Display Special geograph-2635852-by-Ben-Brooksbank.jpg
340B340234032340June 1914December 1962
341B341234132341November 1914December 1962
342B342234232342October 1916December 1962
343B343234332343November 1916December 1962
344B344234432344December 1916November 1962
345B345234532345December 1916December 1962
346B346234632346December 1916November 1962
347B347234732347December 1920December 1962
348B348234832348December 1920November 1962 Bricklayer's Arms branch near North Kent West Junction, Bermondsey geograph-2645927-by-Ben-Brooksbank.jpg
349B349234932349December 1920November 1962
350B350235032350December 1920November 1962
351B351235132351January 1921November 1962
352B352235232352February 1921November 1962
353B353235332353March 1921December 1962 Preston Park RCTS Rail Tour geograph-2979089-by-Ben-Brooksbank.jpg

Liveries

The class have been painted in a variety of different liveries during their careers, reflecting their mixed-traffic role. For the initial trials nos. 337 and 338 were painted in red oxide, and after acceptance they were painted in dove grey, lined with black and white for the official photographs (see above). Thereafter members of the class were painted plain black by the LB&SCR. Under Southern Railway ownership three examples were painted in lined umber, and others in passenger green and lined black. During the Second World War they were either painted in unlined dark green or black. Under British Railways the usual livery was lined black.

Related Research Articles

<span class="mw-page-title-main">London, Brighton and South Coast Railway</span> British pre-grouping railway company

The London, Brighton and South Coast Railway was a railway company in the United Kingdom from 1846 to 1922. Its territory formed a rough triangle, with London at its apex, practically the whole coastline of Sussex as its base, covering a large part of Surrey. It was bounded on its western side by the London and South Western Railway (L&SWR), which provided an alternative route to Portsmouth. On its eastern side the LB&SCR was bounded by the South Eastern Railway (SER)—later one component of the South Eastern and Chatham Railway (SE&CR)—which provided an alternative route to Bexhill, St Leonards-on-Sea, and Hastings. The LB&SCR had the most direct routes from London to the south coast seaside resorts of Brighton, Eastbourne, Worthing, Littlehampton and Bognor Regis, and to the ports of Newhaven and Shoreham-by-Sea. It served the inland towns and cities of Chichester, Horsham, East Grinstead and Lewes, and jointly served Croydon, Tunbridge Wells, Dorking and Guildford. At the London end was a complicated suburban and outer-suburban network of lines emanating from London Bridge and Victoria, and shared interests in two cross-London lines.

<span class="mw-page-title-main">LB&SCR A1 class</span> Class of British 0-6-0T steam locomotives

The London, Brighton and South Coast Railway (LB&SCR) A1 class is a class of British 0-6-0T steam locomotive. Designed by William Stroudley, 50 members of the class were built in 1872 and between 1874 and 1880, all at Brighton railway works. The class has received several nicknames, initially being known as "Rooters" by their south London crews. However, the engines were more famously known as "Terriers" on account of the distinctive 'bark' of the exhaust beat. Later in their careers, some engines were known as "Hayling Billy" on account of their work on the Hayling Island branch line. A pub of this name on the island was briefly home to the engine which is now No. W8 Freshwater.

<span class="mw-page-title-main">Brighton railway works</span> Railway workshops in Brighton, Sussex, England

Brighton railway works was one of the earliest railway-owned locomotive repair works, founded in 1840 by the London and Brighton Railway in Brighton, England, and thus pre-dating the more famous railway works at Crewe, Doncaster and Swindon. The works grew steadily between 1841 and 1900 but efficient operation was always hampered by the restricted site, and there were several plans to close it and move the facility elsewhere. Nevertheless, between 1852 and 1957 more than 1200 steam locomotives as well as prototype diesel electric and electric locomotives were constructed there, before the eventual closure of the facility in 1962.

<span class="mw-page-title-main">LB&SCR E4 class</span>

The London, Brighton and South Coast Railway E4 class is a class of 0-6-2T side tank steam locomotive designed by Robert Billinton. They were introduced in 1897 and were essentially a larger version of the E3 Class. The cylinder diameter was reduced from 18 to 17.5 inches by the Southern Railway.

<span class="mw-page-title-main">LB&SCR E2 class</span> Steam locomotive class

The London, Brighton and South Coast Railway (LB&SCR) E2 class was a class of 0-6-0T steam locomotives designed by Lawson Billinton, intended for shunting and short distance freight trains. Ten examples were built between 1913 and 1916, and were withdrawn from service and scrapped between 1961 and 1963.

<span class="mw-page-title-main">LB&SCR C2 class</span>

The London, Brighton and South Coast Railway C2 class was a class of 0-6-0 steam locomotives, intended for heavy freight trains. Fifty-five were built by the Vulcan Foundry between 1893 and 1902 to the design of Robert J. Billinton. Forty-five of these were later rebuilt between 1908 and 1940, with a larger boiler as the C2X class.

<span class="mw-page-title-main">LB&SCR B4 class</span>

The B4 class were 4-4-0 steam locomotives for express passenger work on the London, Brighton and South Coast Railway. They were designed by R. J. Billinton and were either built at Brighton works 1899–1902 or else by Messrs Sharp, Stewart and Company in 1901. Twelve members of the class were rebuilt from 1922 to 1924 by L. B. Billinton with a larger boiler, cylinders and a superheater. The rebuilt locomotives were classified B4X.

<span class="mw-page-title-main">SECR N class</span> Class of English steam locomotives

The SECR N class was a type of 2-6-0 ("mogul") steam locomotive designed in 1914 by Richard Maunsell for mixed-traffic duties on the South Eastern and Chatham Railway (SECR). Built between 1917 and 1934, it was the first non-Great Western Railway (GWR) type to use and improve upon the basic design principles established by GWR Chief Mechanical Engineer (CME) George Jackson Churchward. The N class was based on the GWR 4300 Class design, improved with Midland Railway concepts.

<span class="mw-page-title-main">LB&SCR E3 class</span>

The London, Brighton and South Coast Railway E3 class were 0-6-2T side tank steam locomotives. One prototype was designed by William Stroudley shortly before his death, but was completed by R. J. Billinton, who later built sixteen further locomotives.

Douglas Earle Marsh (1862–1933) was an English railway engineer, and was the Locomotive, Carriage and Wagon Superintendent of the London, Brighton and South Coast Railway from November 1904 until his early retirement on health grounds in July 1911.

<span class="mw-page-title-main">LB&SCR E1 class</span>

The London, Brighton and South Coast Railway E1 Class were 0-6-0T steam locomotives designed by William Stroudley in 1874 for short-distance goods and piloting duties. They were originally classified E, and generally known as "E-tanks"; They were reclassified E1 in the time of D. E. Marsh.

Lawson ButzkopfskiBillinton was the Locomotive Engineer of the London, Brighton and South Coast Railway from 1912 until the company became part of the Southern Railway in 1923. He joined the LBSCR in 1900 as an apprentice. By the end of 1907 he was a district locomotive superintendent at the railway works at New Cross. From February 1911 Billinton was locum tenens, or caretaker, for Locomotive Engineer D. E. (Earle) Marsh at Brighton works whilst Marsh was on leave of absence due to ill health. Earle Marsh resigned in July 1911. Billinton was promoted to Locomotive Engineer at the beginning of 1912.

<span class="mw-page-title-main">LB&SCR D3 class</span>

LB&SCR D3 class was a 0-4-4T tank locomotive designed by R. J. Billinton for the London, Brighton and South Coast Railway (LB&SCR) between 1892 and 1896. They were built for working passenger trains along country and main lines.

<span class="mw-page-title-main">LB&SCR L class</span>

The LB&SCR L Class was a class of 4-6-4 steam tank locomotives designed by L. B. Billinton for the London, Brighton and South Coast Railway. They were known as the "Brighton Baltics", Baltic being the European name for the 4-6-4 wheel arrangement. Seven examples were built between April 1914 and April 1922 and they were used for express passenger services.

<span class="mw-page-title-main">LB&SCR D1 class</span>

The LB&SCR D1 class were powerful 0-4-2 suburban passenger tank locomotives, designed by William Stroudley of the London Brighton and South Coast Railway in 1873. They were originally known as "D-tanks" but later reclassified as class D1. Members of this very successful class survived in service until 1951.

<span class="mw-page-title-main">LB&SCR B2 class</span>

The London, Brighton and South Coast Railway (LB&SCR) B2 class was a class of small 4-4-0 steam locomotives intended for express passenger work on the LB&SCR London to Portsmouth line. They were designed by R. J. Billinton and built at Brighton works from 1895 to 1897. They proved to be reliable locomotives but barely adequate for the heaviest trains and acquired the nickname Grasshoppers. As a result the B3 class was developed from the B2, and the B2X class was later rebuilt from these locomotives with larger boilers.

<span class="mw-page-title-main">LB&SCR E6 class</span>

The London, Brighton and South Coast Railway E6 class was a class of 0-6-2T side tank steam locomotive designed by Robert Billinton. They were introduced in 1904 and were a development of the E5 class with smaller driving wheels intended for heavy short and medium-distance freight trains.

<span class="mw-page-title-main">LB&SCR H1 class</span>

The London, Brighton and South Coast Railway (LB&SCR) H1 class was a class of 4-4-2 steam locomotives for express passenger work. They were designed by D. E. Marsh and were built by Messrs Kitson and Company in 1905 and 1906.

<span class="mw-page-title-main">LB&SCR H2 class</span> British steam locomotive

The London, Brighton and South Coast Railway H2 class was a class of 4-4-2 steam locomotives for express passenger work. They were designed when D. E. Marsh was officially Locomotive Superintendent, and were built at Brighton Works in 1911 and 1912. As Marsh had worked on the Great Northern Railway as Chief Assistant to Henry Ivatt, the design closely followed that of the GNR Class C1. The entire class was scrapped by British Railways, but a replica entered service on the Bluebell Railway in 2024.

<span class="mw-page-title-main">LB&SCR I3 class</span>

The LB&SCR I3 class was a class of 4-4-2 steam tank locomotives designed by D. E. Marsh for suburban passenger service on the London, Brighton and South Coast Railway.

References

  1. Bradley, D. L. (1974). The Locomotives of the London Brighton and South Coast Railway. Part 3. Railway Correspondence and Travel Society. p. 132.
  2. 1 2 Southern E-Group. "LBSCR K class 2-6-0" . Retrieved 15 April 2009.
  3. Marx, Klaus (2007). Lawson Billinton: a career cut short. Oakwood Press. p. 23. ISBN   978-0-85361-661-0.
  4. Bradley, (1974) pp.132-3.
  5. Bradley, (1974) p.133.
  6. Nock, O. S. (1983). British Locomotives of the Twentieth Century. Vol. 1. Patrick Stephens. p. 173.
  7. Marx, (2007) p.28.
  8. Bradley, (1974), p.133.
  9. Bradley, (1974), p.133. Marx, (2007) p.147.
  10. Ellis, C. Hamilton (1971). The London Brighton and South Coast Railway. Ian Allan. pp. 207–208. ISBN   0-7110-0269-X.
  11. 1 2 Bradley, (1974) p.139.
  12. Bradley, (1974) p.135.
  13. Bradley, (1974), p.139.
  14. 1 2 Bradley, (1974), p.141.
  15. Bradley, (1974), p.140.
  16. "FOREST ROW 3rd MARCH 1954". The Sussex Motive Power Depots. Retrieved 4 October 2020.
  17. Marx, (2007).p.155.
  18. Robertson, Kevin (2004). London, Brighton and South Coast Railway Miscellany. Oxford Publishing. p. 79. ISBN   0-86093-583-3.
  19. Bluebell Railway. "Bluebell Railway Locomotives". Archived from the original on 17 October 2008. Retrieved 17 April 2009.
  20. "LBSCR K class – 2-6-0". 18 March 2014.
  21. Marx, (2007) pp.183-5.
  22. Ellis, (1971) p.207.