Under the Whyte notation for the classification of steam locomotives, a 2-10-4 locomotive has two leading wheels on one axle, usually in a Bissel truck, ten coupled driving wheels on five axles, and four trailing wheels on two axles, usually in a bogie. These were referred to as the Texas type in most of the United States, the Colorado type on the Burlington Route, and the Selkirk type in Canada.
As used in mechanical engineering, the term tractive force can either refer to the total traction a vehicle exerts on a surface, or the amount of the total traction that is parallel to the direction of motion.
Under the Whyte notation for the classification of steam locomotives, 2-10-0 represents the wheel arrangement of two leading wheels on one axle, ten powered and coupled driving wheels on five axles, and no trailing wheels. This arrangement was often named Decapod, especially in the United States, although this name was sometimes applied to locomotives of 0-10-0 "Ten-Coupled" arrangement, particularly in the United Kingdom. Notable German locomotives of this type include the war locomotives of Class 52.
Under the Whyte notation for the classification of steam locomotives, 2-8-0 represents the wheel arrangement of two leading wheels on one axle, usually in a leading truck, eight powered and coupled driving wheels on four axles, and no trailing wheels. In the United States and elsewhere, this wheel arrangement is commonly known as a Consolidation, after the Lehigh and Mahanoy Railroad’s Consolidation, the name of the first 2-8-0.
The London and North Eastern Railway Class P1 Mineral 2-8-2 Mikado was a class of two steam locomotives designed by Nigel Gresley. They were two of the most powerful freight locomotives ever designed for a British railway. It was initially intended they be a more powerful 2-10-0 version of the earlier Class O2 2-8-0s. The design was submitted in August 1923, for use between Peterborough and London, and also between Immingham and Wath marshalling yard. The power was quoted as being 25% more than the O2.
The Indian locomotive class WAG-9 is a class of 25 kV AC electric locomotives that was developed in 1995 by ABB Group (ABB) for Indian Railways. The model name stands for broad gauge (W), AC Current (A), Goods traffic (G), 9th generation (9) locomotive. They entered service in 1996. A total of 4192 WAG-9 have been built at Chittaranjan Locomotive Works (CLW), with more units being built at Banaras Locomotive Works (BLW), Bharat Heavy Electricals Limited (BHEL) and Patiala Locomotive Works (PLW). It was the most powerful freight locomotive of its fleet until the formal introduction of the WAG-12.
Class D16 on the Pennsylvania Railroad was their final development of the 4-4-0 "American" type of steam locomotive. A total of 429 of these locomotives were built at the PRR's Juniata Shops, spread across five subclasses; some had 80 in (2,030 mm) diameter driving wheels for service in level territory, while others had 68 in (1,730 mm) drivers for mountainous terrain. In the pre-1895 scheme, these locomotives were second class L.
The Barry Railway Class H was a small class of seven 0-8-2T tank locomotives built for the Barry Railway by Sharp Stewart in 1896. When they were introduced they were the first locomotives in Britain to use the 0-8-2 wheel arrangement.
Indian locomotive class YAM1 is the first, and so far only class of metre gauge (Y), Alternating Current (A), mixed traffic (M) electric locomotive in India. Twenty were built in 1964–66 by a Japanese consortium led by Mitsubushi.
Baldwin, the locomotive manufacturer, and Westinghouse, the promoter of AC electrification, joined forces in 1895 to develop AC railway electrification. Soon after the turn of the century, they marketed a single-phase high-voltage system to railroads. From 1904 to 1905 they supplied locomotives carrying a joint builder's plate to a number of American railroads, particularly for the New Haven line from New York to New Haven, and other New Haven lines. Westinghouse would produce the motors, controls, and other electrical gear, while Baldwin would produce the running gear, frame, body, and perform final assembly.
Maine Central Railroad Class W locomotives were intended for heavy freight service. They were of 2-8-0 wheel arrangement in the Whyte notation, or "1'D" in UIC classification. They replaced earlier class O 4-6-0 locomotives beginning in 1910. They were in turn replaced by class S 2-8-2 locomotives for the heaviest freight service beginning in 1914, but remained in use on lighter freight trains until replaced by diesel locomotives after World War II.
Maine Central Railroad Class S locomotives were intended for heavy freight service. They were of 2-8-2 wheel arrangement in the Whyte notation, or " 1'D1' " in UIC classification. They replaced earlier class W 2-8-0 locomotives beginning in 1914. They were the largest and most modern steam freight locomotives built for Maine Central; although former Boston and Maine Railroad 2-10-2s were later purchased to handle World War II freight traffic. Class S locomotives pulled freight trains over the main line between Portland and Bangor, Maine; and are best remembered for service on the Mountain Division from 1929, when the class X Mallet locomotives were scrapped, until replacement by diesel locomotives in the early 1950s.
Maine Central Railroad Class O locomotives were originally intended for heavy freight service. They were of 4-6-0 wheel arrangement in the Whyte notation, or "2'C" in UIC classification. They replaced earlier class P 2-6-0 locomotives beginning in 1903. They were in turn replaced by class W 2-8-0 locomotives for the heaviest freight service beginning in 1910, but remained in use on branch line trains until replaced by diesel locomotives after World War II. They proved so well-suited for branch line service the design was among the last steam locomotives built for the Maine Central.
Maine Central Railroad Class H locomotives were intended for branch line passenger service. They were of 4-4-0 wheel arrangement in the Whyte notation, or "2'B" in UIC classification. Built by the American Locomotive Company's (ALCO) Manchester in 1898 the last were completed at ALCO's Schenectady, New York plant in 1898 all were scrapped between 1916 and 1921. None of the Maine Central Class H 4-4-0 were preserved.
Maine Central Railroad Class N locomotives were intended for main line passenger service. They were of 4-6-0 wheel arrangement in the Whyte notation, or "2'C" in UIC classification. All were built at the Schenectady Locomotive Works which became the American Locomotive Company (ALCO) in 1901. They replaced earlier class L 4-4-0 locomotives beginning in 1899. They were transferred to branch line passenger service as replaced by class C 4-6-2 locomotives beginning in 1907. Most were scrapped during the Great Depression and none survived World War II.
Maine Central Railroad Class C locomotives were intended for main line passenger service. They were of 4-6-2 wheel arrangement in the Whyte notation, or " 2'C1' " in UIC classification. They replaced earlier class N 4-6-0 locomotives beginning in 1907. Class C locomotives pulled named passenger trains until replacement by diesel locomotives after World War II.
Maine Central Railroad steam switchers were designated Class K. They were of 0-6-0 wheel arrangement in the Whyte notation, or "C" in UIC classification. American Locomotive Company (ALCO) began building more powerful yard locomotives for Maine Central in 1909. Twenty locomotives numbered 161 through 180 were active in 1923, and worked in Maine's largest cities until replaced by diesels after World War II.
Maine Central Railroad Class M locomotives were originally intended for heavy freight service. They were of 2-6-0 wheel arrangement in the Whyte notation, or "1'C" in UIC classification. They were replaced by class P 2-6-0 locomotives for the heaviest freight service beginning in 1896, and spent their final years as yard switchers. The oldest of the class surviving past United States Railroad Administration operation were Portland Company builders numbers 606 and 607 built in 1890. Eleven built by Schenectady Locomotive Works in 1893 and 1894 also appeared in the 221-245 number sequence on Maine Central's 1923 locomotive roster. The longest surviving representatives of the class were three built by Schenectady in 1897 as Portland and Rumford Falls Railway numbers 10 through 12. These three were rebuilt with higher-pressure boilers in Maine Central's Waterville shop between 1914 and 1921 as sub-class M-5. These reboilered locomotives with 25,000 lbf (111.2 kN) tractive effort were numbered 246 through 248. Number 247 was the last survivor of the class when scrapped in 1946.
Maine Central Railroad began operating diesel locomotives in 1935, and had retired all steam locomotives by 1954. That time interval was a joint operating period with the Boston and Maine Railroad (B&M). This article describes diesel locomotives owned by Maine Central through the period of joint operation and later independent operation prior to Guilford Rail System control in 1981.
Est 4003 to 4175 was a class of 173 French compound 2-8-0 locomotives built in the early years of the 20th century for the Chemins de fer de l'Est. They were built to handle the increasing output of the steel industry in the Lorraine area.
