Mercedes-Benz M102 engine

Last updated
Mercedes-Benz M102 engine
2.5-16 Cosworth.JPG
Overview
Manufacturer Mercedes-Benz
Production1980–1993
Layout
Configuration Straight-4
Displacement
  • 1.8 L (1,797 cc)
  • 2.0 L (1,997 cc)
  • 2.3 L (2,299 cc)
  • 2.5 L (2,498 cc)
  • 2.5 L (2,463 cc)
Cylinder bore
  • 89 mm (3.504 in)
  • 95.5 mm (3.760 in)
  • 97.3 mm (3.831 in)
Piston stroke
  • 72.2 mm (2.843 in)
  • 80.25 mm (3.159 in)
  • 87.2 mm (3.433 in)
  • 82.8 mm (3.260 in)
Valvetrain
Compression ratio 10.5:1
Combustion
Fuel system175 CDT Carburetor
Multi-point fuel injection
Management Bosch KE-Jetronic
Fuel type Gasoline
Cooling system Water-cooled
Output
Power output 63–173 kW (86–235 PS; 84–232 bhp)
Torque output 154–245 N⋅m (114–181 lb⋅ft)
Dimensions
Dry weight 118 kg (260 lb)
Chronology
Predecessor Mercedes-Benz M115 engine
Successor Mercedes-Benz M111 engine

The M102 engine family is a inline-four gasoline automobile engine family built by Mercedes-Benz in the 1980s and early 1990s. It is a relatively oversquare engine with a large bore and short stroke compared to the M115 engine which was used during the same timeframe.

Contents

M102.910

Used in the W201 190E 1.8 from 1990 onwards (badged as 180E in Australia from 1991 to 1993). Cubic capacity: 1,797 cc (1.8 L). Power output: 80 kW (109 PS; 107 bhp). Torque: 154 N⋅m (114 lb⋅ft)

Applications:

M102.920

The M102.920 was a 2.0 L engine with an bore and stroke 89 mm × 80.25 mm (3.50 in × 3.16 in). Equipped with carburetor 175 CDT. Cubic capacity: 1,997 cc (2.0 L). Power output: 80 kW (109 PS; 107 bhp). Swedish and Swiss market models developed 98 PS (72 kW) at 5000 rpm thanks to their stricter emissions regulations. [1]

Applications:

M102.921

Similar to M102.920, but less power due to a different camshaft and different carburetor. Power Output: 66 kW (90 PS; 89 bhp)

Applications:

M102.922

An update of the M102.920 engine for use in the W124 chassis, Cubic capacity: 1,997 cc (2.0 L). Power output: 80 kW (109 PS; 107 bhp). During 1989 the bore was shrunk by 0.05 mm (0.0020 in), bringing the displacement down to 1996 cc. This change was applied across the board of all 2.0 and 2.3-litre M102 engines as part of running updates carried out between 1988 and 1990.

Applications:

M102.924

Similar to M102.921, different carburetor, single-belt drive for alternator, power steering pump and air-conditioning compressor (where fitted). Hydraulic aided valvetrain. Power output: 77 kW (105 PS; 103 bhp).

Applications:

M102.938

Low compression version of M102.921. Power output: 63 kW (86 PS; 84 bhp).

Applications:

M102.939

Low compression version of M102.920. Power output: 74 kW (101 PS; 99 bhp).

Applications:

M102.961

A 2.0 L multi-point fuel-injected (KE-Jetronic) variation of the M102.921. An "E" was added to the model of the vehicle (standing for "einspritzung", the German word for fuel injection). This engine is identified by TSZ ignition and multiple belts for the alternator, power steering and air conditioning compressor (where fitted). Cubic capacity: 1,997 cc (2.0 L). Power output: 90 kW (122 PS; 121 bhp)

Application

M102.962

An update to the M102.961 introduced in 1985. This is identified by the EZL ignition system and a single accessory drive belt. Cubic capacity: 1,997 cc (2.0 L). Power output: 87–90 kW (118-122 PS; 117-120 bhp)

Applications:

M102.963

2.0litre version with KE-Jetronic fuel injection. Cubic capacity: 1,996 cc (2.0 L). Power output: 90 kW (122 PS; 121 bhp)

Applications:

M102.964

2.0litre version with KE-Jetronic fuel injection for the italian W460. Cubic capacity: 1,997 cc (2.0 L). Power output: 90 kW (122 PS; 121 bhp)

Applications:

M102.980

The M102.980 was a 2.3 L version with a 95.5 mm (3.76 in) bore and the same 80.25 mm (3.16 in) stroke. Engine weight was 118 kg (260 lb). Used K-Jetronic fuel injection. Cubic capacity: 2,299 cc (2.3 L). Power output: 100 kW (136 PS; 134 bhp)

Applications:

M102.981

The M102.981 was a 2.3 L version with a 95.5 mm (3.76 in) bore and the same 80.25 mm (3.16 in) stroke. Cubic capacity: 2,299 cc (2.3 L). Power output: 92 kW (125 PS; 123 bhp)

Applications:

M102.982

Similar to the M102.980 version, but with the newer KE-Jetronic system from Bosch. Cubic capacity: 2,299 cc (2.3 L). Power output: 97 kW (132 PS; 130 bhp)

Applications:

M102.983

A 16-valve version of the M102.985 with cylinder head designed by Cosworth.Cubic capacity: 2,299 cc (2.3 L). Power output: 138 kW (188 PS; 185 bhp); USA: 125 kW (170 PS; 168 bhp)

Applications:

M102.985

An 8-valve M102 with a displacement of 2.3 L used in the W201 chassis with KE-Jetronic fuel injection. Cubic capacity: 2,299 cc (2.3 L). Power output: 97 kW (132 PS; 130 bhp)

Applications:

M102.990

An update of the 16-valve version with increased capacity (2.5 L) and stiffening ribs, still with a cylinder head designed by Cosworth. Cubic capacity: 2,498 cc (2.5 L). Power output: 150 kW (204 PS; 201 bhp)

Applications:

M102.991

An update of the 2.5 16-valve version, with shorter stroke and larger bore. H beam rods and piston cooling jets. Cubic capacity: 2,463 cc (2.5 L). Power output: 147 kW (200 PS; 197 bhp)

Applications:

M102.992

An update of the 102.991 version with removal of four crankshaft counterweights and even more stiffening ribs for higher RPMs. Single timing chain, oil pump with separate drive chain. Bigger intake manifold, camshaft and exhaust system. Higher compression ratio 10.5:1. Cubic capacity: 2,463 cc (2.5 L). Power output: 173 kW (235 PS; 232 bhp)

Applications:

See also

Related Research Articles

<span class="mw-page-title-main">Mercedes-Benz W201</span> Motor vehicle

The Mercedes-Benz W201 is the internal designation for the Mercedes 190 series sedans, a range of front-engine, rear drive, five passenger, four-door sedans manufactured over a single generation, from 1982 to 1993 as the company's first compact class automobile.

<span class="mw-page-title-main">BMW M30</span> Reciprocating internal combustion engine

The BMW M30 is a SOHC straight-six petrol engine which was produced from 1968 to 1995. With a production run of 27 years, it is BMW's longest produced engine and was used in many car models.

<span class="mw-page-title-main">BMW M10</span> Reciprocating internal combustion engine

The BMW M10 is a SOHC inline-4 petrol engine which was produced by BMW from 1962-1988. It was the company's first four-cylinder engine since the BMW 309 ended production in 1936 and was introduced in the New Class sedans.

<span class="mw-page-title-main">BMW M20</span> Reciprocating internal combustion engine

The BMW M20 is a SOHC straight-six petrol engine which was produced from 1977 to 1993. It was introduced eight years after the larger BMW M30 straight-six engine, which remained in production alongside the M20.

<span class="mw-page-title-main">Ford Cologne V6 engine</span> Reciprocating internal combustion engine

The Ford Cologne V6 is a series of 60° cast iron block V6 engines produced by the Ford Motor Company from 1962 to 2011 in displacements between 1.8 L; 110.6 cu in (1,812 cc) and 4.0 L; 244.6 cu in (4,009 cc). Originally, the Cologne V6 was installed in vehicles intended for Germany and Continental Europe, while the unrelated British Essex V6 was used in cars for the British market. Later, the Cologne V6 largely replaced the Essex V6 for British-market vehicles. These engines were also used in the United States, especially in compact trucks.

<span class="mw-page-title-main">Toyota M engine</span> Reciprocating internal combustion engine

Toyota Motor Corporation's M family of engines were a longitudinally mounted straight-6 engine design. They were used from the 1960s through the 1990s. All M family engines were OHC designs. While the M family was born with a chain-driven single camshaft it evolved into a belt-driven DOHC system after 1980. All M family engines used a cast-iron block with an aluminum cylinder head, and were built at the Toyota Kamigo plant in Toyota City, Japan.

The Ferrari Dino engine is a line of mechanically similar V6 and V8 engines produced by Ferrari for about 40 years from the late 1950s into the early 2000s.

<span class="mw-page-title-main">Ferrari Colombo engine</span> Reciprocating internal combustion engine

The Ferrari Colombo engine is a petrol fueled, water cooled, carburetted 60° V12 engine designed by Gioacchino Colombo and produced in numerous iterations by Italian automaker Ferrari between 1947 and 1988. The maker's first homegrown engine, its linear successor is the Lampredi V12, which it far outlived, the last Lampredi being made in 1959.

<span class="mw-page-title-main">Mitsubishi Sirius engine</span> Reciprocating internal combustion engine

The Mitsubishi Sirius or 4G6/4D6 engine is the name of one of Mitsubishi Motors' four series of inline-four automobile engines, along with Astron, Orion, and Saturn.

<span class="mw-page-title-main">Mitsubishi 4G9 engine</span> Reciprocating internal combustion engine

The Mitsubishi 4G9 engine is a series of straight-4 automobile engines produced by Mitsubishi Motors. All are 16-valve, and use both single- and double- overhead camshaft heads. Some feature MIVEC variable valve timing, and it was the first modern gasoline direct injection engine upon its introduction in August 1996.

<span class="mw-page-title-main">Honda F20C engine</span> Reciprocating internal combustion engine

The F20C and F22C1 were inline-4 engines produced by Honda for use in the Honda S2000. They are one of the few Honda 4-cylinder automobile engines that are designed to sit longitudinally for rear wheel drive.

<span class="mw-page-title-main">Toyota GR engine</span> Reciprocating internal combustion engine

The Toyota GR engine family is a gasoline, open-deck, piston V6 engine series. The GR series has a 60° die-cast aluminium block and aluminium DOHC cylinder heads. This engine series also features 4 valves per cylinder, forged steel connecting rods and crankshaft, one-piece cast camshafts, a timing chain, and a cast aluminium lower intake manifold. Some variants use multi-port fuel injection, some have D4 direct injection, and others have a combination of direct injection and multi-port fuel injection or D4-S.

<span class="mw-page-title-main">Mercedes-Benz M115 engine</span> Reciprocating internal combustion engine

The M115 engine family was a straight-4 automobile engine from Mercedes-Benz that was produced during the 1970s. This engine was a successor from the M121 and was replaced by the M102 engine. This engine is modified from the M121 by adding a five-bearing crankshaft. The same engine was produced in several versions with differing volume, compression, and horse power according to its application.

<span class="mw-page-title-main">Mercedes-Benz M110 engine</span> Reciprocating internal combustion engine

The M110 engine family is a DOHC crossflow cylinder head design with 2 valves per cylinder straight-6 automobile engine made by Mercedes-Benz in the 1970s and 1980s.

<span class="mw-page-title-main">Mercedes-Benz M123 engine</span> Reciprocating internal combustion engine

The M123 engine family was a straight-6 automobile engine from Mercedes-Benz, used from 1976 to 1984 in the W123 series models 250 and 250 T. It replaced the 6-cylinder engines M180 in the 230 and M130 in the 250 versions from the W114 series.

<span class="mw-page-title-main">Mercedes-Benz OM616 engine</span> Reciprocating internal combustion engine

The OM616 engine family is a diesel automobile Inline-four engine from Mercedes-Benz used in the 1970s and 1980s, and produced by Force Motors in India from the 1980s to the present.

<span class="mw-page-title-main">Mercedes-Benz M104 engine</span> Reciprocating internal combustion engine

The Mercedes-Benz M104 is a automobile straight-six engine produced from 1988 through 1999. It has a double overhead cam design with 4 valves per cylinder, and used a crossflow cylinder head. It replaced the M103 and was replaced by the M112 V6 starting in 1997. The bore spacing on all M104 engines is the same as M103 engines.

<span class="mw-page-title-main">Honda R engine</span> Reciprocating internal combustion engine

The Honda R engine is an inline-four engine launched in 2006 for the Honda Civic (non-Si). It is fuel injected, has an aluminum-alloy cylinder block and cylinder head, is a SOHC 16-valve design and utilizes Honda's i-VTEC system. The R series engine has a compression ratio of 10.5:1, features a "drive by wire" throttle system which is computer controlled to reduce pumping losses and create a smooth torque curve.

<span class="mw-page-title-main">Opel cam-in-head engine</span> Reciprocating internal combustion engine

The Opel cam-in-head engine (CIH) is a family of automobile engines built by former General Motors subsidiary Opel from 1965 until 1998, appearing extensively in Opel/Vauxhall badged cars during this period. Both four- and six-cylinder inline configurations were produced. The name derives from the location of the camshaft, which was neither cam-in-block nor a true overhead camshaft. In the CIH engine the camshaft is located in the cylinder head but sits alongside the valves rather than above them, so therefore effectively is still an overhead valve design. The valves are actuated through very short tappets and rocker arms. The engine first appeared in the Opel Rekord B in 1965, and was largely replaced in four-cylinder form by the GM Family II unit as Opel/Vauxhall's core mid-size engine in the 1980s, with the six-cylinder versions continuing until 1994 in the Omega A and Senator B. A large capacity 2.4L four-cylinder version continued until 1998.

References

  1. Hogsten, Dag E. (1982-10-06). "Prestige till varje pris" [Prestige at any cost]. Teknikens Värld (in Swedish). Vol. 34, no. 21. Stockholm, Sweden: Specialtidningsförlaget AB. p. 26.