 | |
| Company type | Public |
|---|---|
| SIX: MBTN | |
| Industry | Photovoltaics |
| Founded | 1953 (1999 as holding) |
| Headquarters | , |
Key people |
|
| Revenue | 147.2 million Swiss francs (CHF) (FY 2022) [2] |
Number of employees | 1200 (January 2023) [3] |
| Website | www |
Meyer Burger Technology AG is an industrial manufacturer of solar cells and solar modules, headquartered in Gwatt, a district of Thun, Switzerland. The company's registered shares are listed on the SIX Swiss Exchange.
The company headquarters are located in Thun, (Switzerland).
At the German production sites in Thalheim (Bitterfeld-Wolfen) in Saxony-Anhalt (formerly Sovello) and Freiberg in Saxony (formerly SolarWorld), production of heterojunction solar cells and photovoltaic modules began in mid-2021. The following year, the company announced the expansion of production. [4] In October 2022, the company announced a further capital increase of CHF 250 million. This was approved at an extraordinary general meeting on 28 October 2022. [5] The production equipment is developed and built in Meyer Burger’s own equipment building unit in Hohenstein-Ernstthal (Saxony). [6] In January 2024, German media reported plans for closing the Freiberg, Saxony, location and keeping only Bitterfeld-Wolfen open. Meyer Burger already abandoned expansion plans for their Thalheim factory in favor of investing in Colorado Springs, Colorado. [7]
Due to improved investment conditions, Meyer Burger has increased its expansion plans to open a 2 gigawatt solar panel production site in Goodyear, Arizona. [8] [9]
Meyer Burger has R&D units in Switzerland and Germany. More than 15 per cent of all employees work in these units (2022). [10] Working in consortium with Centre Suisse d’Électronique et de Microtechnique, Helmholtz-Zentrum Berlin, Fraunhofer Institute for Solar Energy Systems, and the University of Stuttgart, Meyer Burger is researching perovskite tandem solar cells and developing next-generation solar modules. [11]
In 2019, Meyer Burger became the largest shareholder in "Oxford Photovoltaics Ltd", an Oxford University spin-off in the field of heterojunction and perovskite technology. [12] [13] Oxford PV attempted to unilaterally terminate the cooperation agreement in July 2021. [14]
Meyer Burger operates sales offices in Europe, the United States, Asia and Australia. [15]
The registered shares have been traded on the SIX Swiss Exchange in Zürich since November 2006 (SIX ticker symbol: MBTN). They are included in the Swiss Performance Index and other stock market indices.
The largest shareholders include (as of June 2023): [16]
Hans Meyer founded a mechanical workshop in Hünibach-Eichbühl in early 1951. When Wilhelm Burger became co-owner in 1953, the company, which developed and produced machines for the watch industry, was renamed Meyer & Burger. In 1956 they built a new factory in nearby Steffisburg. From 1960 onwards, they mainly manufactured cut-off machines and a universal machine tool UW1. They were located in Hilterfingen until 1998. [18]
The company was founded in 1953 [19] as a manufacturer of watch stone processing machines and subsequently specialised in sawing machines. In 1999, the company set up a holding structure [20] with the foundation of "Meyer & Burger Holding AG" in Zug [20] and launched the first bandsaw for the solar industry on the market in the same year.
In the course of the growing solar industry, the company began to open up the European, Asian and American markets. [21]
In 2006, the Group was renamed from "Meyer & Burger Holding AG" to "Meyer Burger Technology AG" and its headquarters moved to Baar. [21] The company went public in November 2006. [22]
In 2010, Meyer Burger merged with the previously independent company 3S Industries. [23] 3S Industries had its registered office in Lyss and was founded in 2001. [24] 3S had been listed on the Bern Stock Exchange since 2005. [25] The former competence centres of 3S Industries became business units of Meyer Burger.
In the course of the merger with 3S Industries, Pasan became part of Meyer Burger in 2010. [26] The company focuses on the development and production of test and measurement systems for solar cells and modules. [27] These include solar simulators, which are used by international certification bodies such as TÜV as well as numerous cell and module manufacturers. The company is based in Neuchâtel in Switzerland. [28]
In 2012, the Group headquarters were relocated to Thun following the move into the new building. [29]
Between 2010 and 2012, the Group was significantly enlarged through various corporate takeovers in order to be able to cover the entire value chain (wafer–cell–module) in photovoltaic production with its own production machines. The most important products were diamond wire saws for cutting ultra-thin silicon wafers, coating systems to build functioning solar cells from wafers, and systems for the manufacture of complete solar modules. [30]
"Roth & Rau AG" was renamed "Meyer Burger (Germany) AG" in 2015. [31] The company developed and produced systems and machines for surface processing in the photovoltaic industry and was instrumental in the industrialisation of the so-called PERC (Passivated Emitter and Rear Contact) technology. [32] In addition, the company develops and builds mass production systems for the manufacture of highly efficient solar cells with heterojunction technology. [33]
In the meantime, the corporate structure has been adapted and the focus has been placed on the areas of solar cell production and connection, i.e. on heterojunction cell coating and SmartWire Connection Technology for cell connection. In this context, the entire "Sawing and Cutting Technology" division was sold to "Precision Surfacing Solutions" in May 2019. While the company is still headquartered in Thun, Meyer Burger operates its equipment production and R&D site in Hohenstein-Ernstthal, where Meyer Burger acquired a majority stake in Roth & Rau in 2011. [34]
After a public dispute between the board of directors and the main shareholders, including "Sentis Capital" and "Elysium Capital", shareholder representatives were elected to the top management body and a changed corporate strategy was announced in mid-2020 after eight years of losses. [35] [36] A capital increase of 165 million Swiss francs was carried out to enable a realignment; [37] "Sentis Capital" committed in advance to contribute 50 million Swiss francs. [38]
In the course of a realignment of the company, Meyer Burger has sold some business units and subsidiaries, in particular as of 2018.
The company "3S Industries" with, among others, the business units "3S Modultec" and "3S Photovoltaics" merged with Meyer Burger in 2010 and continued as the business unit "3S Photovoltaics". The brands "3S Modultec" and "Solar Building Technologies" were subsequently created. The business unit was later integrated into Meyer Burger's "Energy Systems" business unit and in 2018 was spun off and sold as a separate company, "3S Solar Plus Ltd." [39] [40]
The "Sawing and Cutting Technology" business unit was sold to "Precision Surfacing Solutions" (PSS) for CHF 50 million at the end of April 2019. [41]
Meyer Burger Group also included "AIS Automation Dresden GmbH" until 2019. It was then sold to S&T. [42]
In the course of the acquisition of "Roth & Rau AG" in 2011, "Roth & Rau Netherlands B.V." also became part of the Meyer Burger Group. The business unit was sold in December 2019. [43] Part of "Roth & Rau AG" was also "Muegge GmbH" which was sold in August 2020. [44]
Photovoltaics (PV) is the conversion of light into electricity using semiconducting materials that exhibit the photovoltaic effect, a phenomenon studied in physics, photochemistry, and electrochemistry. The photovoltaic effect is commercially used for electricity generation and as photosensors.
A solar cell or photovoltaic cell is an electronic device that converts the energy of light directly into electricity by means of the photovoltaic effect. It is a form of photoelectric cell, a device whose electrical characteristics vary when it is exposed to light. Individual solar cell devices are often the electrical building blocks of photovoltaic modules, known colloquially as "solar panels". The common single-junction silicon solar cell can produce a maximum open-circuit voltage of approximately 0.5 to 0.6 volts.
A solar panel is a device that converts sunlight into electricity by using photovoltaic (PV) cells. PV cells are made of materials that produce excited electrons when exposed to light. The electrons flow through a circuit and produce direct current (DC) electricity, which can be used to power various devices or be stored in batteries. Solar panels are also known as solar cell panels, solar electric panels, or PV modules.
SolarWorld is a German company dedicated to the manufacture and marketing photovoltaic products worldwide by integrating all components of the solar value chain, from feedstock (polysilicon) to module production, from trade with solar panels to the promotion and construction of turn-key solar power systems. The group controls the development of solar power technologies at all levels in-house.
Moser Baer was an Indian multinational manufacturer of optical discs, storage devices, CDs, DVDs, based in New Delhi. The company was present in over 100 countries, serviced through 15 marketing offices and representatives, and had tie-ups with other optical media storage manufacturers. Its products were manufactured at its three plants in New Delhi, which employed over 8,000 people. The company had subsidiaries that manufactured photovoltaic cells and modules using crystalline silicon and thin film technologies.
Solar power accounted for an estimated 10.7% electricity in Germany in 2022, up from 1.9% in 2010 and less than 0.1% in 2000.
Sharp Solar, a subsidiary of Sharp Electronics, is a solar energy products company owned by Sharp Corporation and based in Osaka, Japan.
Ascent Solar Technologies, Inc. is a publicly traded photovoltaic (PV) company located in Thornton, Colorado. Its primary product is a flexible CIGS solar cell on a plastic substrate.
Cadmium telluride (CdTe) photovoltaics is a photovoltaic (PV) technology based on the use of cadmium telluride in a thin semiconductor layer designed to absorb and convert sunlight into electricity. Cadmium telluride PV is the only thin film technology with lower costs than conventional solar cells made of crystalline silicon in multi-kilowatt systems.
Between 1992 and 2023, the worldwide usage of photovoltaics (PV) increased exponentially. During this period, it evolved from a niche market of small-scale applications to a mainstream electricity source. From 2016-2022 it has seen an annual capacity and production growth rate of around 26%- doubling approximately every three years.
Crystalline silicon or (c-Si) Is the crystalline forms of silicon, either polycrystalline silicon, or monocrystalline silicon. Crystalline silicon is the dominant semiconducting material used in photovoltaic technology for the production of solar cells. These cells are assembled into solar panels as part of a photovoltaic system to generate solar power from sunlight.
The Fraunhofer Institute for Solar Energy Systems ISE is an institute of the Fraunhofer-Gesellschaft. Located in Freiburg, Germany, The Institute performs applied scientific and engineering research and development for all areas of solar energy. Fraunhofer ISE has three external branches in Germany which carry out work on solar cell and semiconductor material development: the Laboratory and Service Center (LSC) in Gelsenkirchen, the Technology Center of Semiconductor Materials (THM) in Freiberg, and the Fraunhofer Center for Silicon Photovoltaics (CSP) in Halle. From 2006 to 2016 Eicke Weber was the director of Fraunhofer ISE. With over 1,100 employees, Fraunhofer ISE is the largest institute for applied solar energy research in Europe. The 2012 Operational Budget including investments was 74.3 million euro.
Solar power in Switzerland has been growing rapidly in recent years due to declining system costs and a feed-in tariff instituted by the Swiss government.
Flisom is a developer and manufacturer of photovoltaic (PV) thin film solar cells, located near Zurich, Switzerland. The company produces high-efficiency CIGS thin film solar modules on flexible plastic foil using proprietary roll-to-roll manufacturing techniques.
sonnen GmbH is a company in the energy industry headquartered in Wildpoldsried in the district of Oberallgäu, Germany. It produces home energy storage systems for private households and small businesses. The company is considered the market leader in Germany and additional international markets. Moreover, it is the center of a community for supplying power from renewable energies.
Oxford Photovoltaics Limited is an Oxford University spin-off company in the field of perovskite photovoltaics and solar cells.
Vat Group AG is an internationally active Swiss company for vacuum valves and related services in the semiconductor, display and solar sectors, as well as in the industrial and research sectors, with headquarters in Haag in the municipality of Sennwald in the Canton of St. Gallen (Switzerland). The internationally active company's products are used in semiconductor and flat panel display manufacturing, glass and tool coating, Metallurgy, surface analysis, high-energy physics, Synchrotrons, Laser technology, and space simulation, among others.
Heterojunction solar cells (HJT), variously known as Silicon heterojunctions (SHJ) or Heterojunction with Intrinsic Thin Layer (HIT), are a family of photovoltaic cell technologies based on a heterojunction formed between semiconductors with dissimilar band gaps. They are a hybrid technology, combining aspects of conventional crystalline solar cells with thin-film solar cells.
3Sun is a photovoltaic panel factory established in 2010 in Catania, Italy. In 2015, Enel Green Power became the company's sole shareholder. 3Sun was established as a joint venture by Enel Green Power, Sharp Corporation, and STMicroelectronics, each owning 33% of 3Sun. Between 2011 and 2014, 3Sun built a photovoltaic cell and module plant in Catania that employed thin-layer technology. Sharp contributes the amorphous silicon multi-junction thin-film technology, Enel Green Power manages the commercial distribution, and STMicroelectronics provides personnel specialized in processes and research and development. On March 6, 2015, Enel Green Power has been the sole owner of 3Sun.
 SMI MID (SMIM) companies of Switzerland | |
|---|---|
|
