Modacrylic

Last updated September 25, 2024

A modacrylic is a synthetic copolymer. Modacrylics are soft, strong, resilient and dimensionally stable. They can be easily dyed, show good press and shape retention, and are quick to dry. They have outstanding resistance to chemicals and solvents, are not attacked by moths or mildew, and are nonallergenic. Among their uses are in apparel linings, furlike outerwear, paint-roller covers, scatter rugs, carpets, and work clothing and as hair in wigs.^[1]

Commercial production of modacrylic fiber began in 1949 by Union Carbide Corporation in the United States. Modacrylic and acrylic fibers are similar in composition and at one time were in the same category. In 1960 the Federal Trade Commission decided to separate the two fibers and establish a category for each.^[2]

The Federal Trade Commission defines modacrylic fibers as manufactured fibers in which the fiber-forming substance is any long-chain synthetic polymer composed of less than 85%, but at least 35% weight acrylonitrile units except when the polymer qualifies as rubber.^[3]

Production

Modacrylic fibers are modified acrylic fibers made from acrylonitriles, but larger amounts of other polymers are added to make the copolymers.

The modacrylic fibers are produced by polymerizing the components, dissolving the copolymer in acetone, pumping the solution into the column of warm air (dry-spun), and stretching while hot.^[3]

Modacrylics are creamy or white and are produced in tow and staple form. If looked at in cross section views they have an irregular shape. Modacrylic fibers are also produced in many different lengths, crimp levels, deniers and they can have various shrinkage potentials.

Current modacrylic fiber producers include Kaneka Corporation in Japan.^[4]

Properties

A modacrylic has properties that are similar to an acrylic. However, modacrylics are flame retardant and do not combust. The fibers are difficult to ignite and will self-extinguish. In addition to a modacrylic's flame retardant properties it has a relatively high durability that is comparable to wool. Modacrylic fibers have a moderate resistance to abrasion and a very low tenacity.

One of the most interesting properties of Modacrylic fabrics is the arc flash protection, where it has very good values.

Modacrylics are poor conductors of heat. The fabrics are soft, warm and resilient but are prone to pilling and matting. Modacrylics display high performance when it comes to appearance retention. The fibers are quite resilient and will not wrinkle. They also have great dimensional stability and high elastic recovery, which gives them the ability to hold their shape.^[3]

Care

Modacrylics are sensitive to loss of appearance due to improper care; therefore, it is important to know how to care for modacrylics. Modacrylics are resistant to acids, weak alkalis, and organic solvents. These fibers are also resistant to moths, mildew and sunlight. Modacrylic fabrics can be machine washed using warm water and tumble dried on a low setting. Modacrylic pieces can also be dry-cleaned, however, they should not be steamed and should only be tumbled on cold. Some fabrics may also be cleaned using the furrier method (a special non immersion cleaning process). The fibers are heat sensitive and will shrink at 121 °C (250 °F) and will stiffen at temperatures over 149 °C (300 °F).^[3]

Uses

Modacrylics are used by producers of technically advanced fabrics for comfortable and protective blends often used in personal protective equipment, primarily when environmental resistance or flame retardancy is necessary or required. Modacrylics can combine flame retardancy with a relatively low density, keeping protective gear from being uncomfortably heavy (i.e. shirts and trousers worn by electrical linemen). The combination of flame retardancy and low density is also useful in furnishings, draperies, and outdoor fabrics.

Modacrylics are also commonly used in fake fur fabrics, toupées, wigs and fleece-type fabric. By mixing the various forms of fibers one can easily create a realistic synthetic fur. The fabrics can then be sheared or embossed to resemble fur even more closely. The heat-sensitivity of modacrylic also allows wigs and hairpieces to be curled and heat styled without damage.^[3]

Modacrylics are also used in fleece, knit-pile fabric backings, and nonwoven fabrics. Other uses of modacrylics include paint rollers, industrial fabrics, stuffed toys and filters.^[5]

Related Research Articles

<span class="mw-page-title-main">Thermoplastic</span> Plastic that softens with heat and hardens on cooling

A thermoplastic, or thermosoftening plastic, is any plastic polymer material that becomes pliable or moldable at a certain elevated temperature and solidifies upon cooling.

<span class="mw-page-title-main">Polyacrylonitrile</span> Chemical compound

Polyacrylonitrile (PAN) is a synthetic, semicrystalline organic polymer resin, with the linear formula (CH₂CHCN)_n. Almost all PAN resins are copolymers with acrylonitrile as the main monomer. PAN is used to produce large variety of products including ultra filtration membranes, hollow fibers for reverse osmosis, fibers for textiles, and oxidized PAN fibers. PAN fibers are the chemical precursor of very high-quality carbon fiber. PAN is first thermally oxidized in air at 230 °C to form an oxidized PAN fiber and then carbonized above 1000 °C in inert atmosphere to make carbon fibers found in a variety of both high-tech and common daily applications such as civil and military aircraft primary and secondary structures, missiles, solid propellant rocket motors, pressure vessels, fishing rods, tennis rackets and bicycle frames. It is a component repeat unit in several important copolymers, such as styrene-acrylonitrile (SAN) and acrylonitrile butadiene styrene (ABS) plastic.

Lamination is the technique/process of manufacturing a material in multiple layers, so that the composite material achieves improved strength, stability, sound insulation, appearance, or other properties from the use of the differing materials, such as plastic. A laminate is a layered object or material assembled using heat, pressure, welding, or adhesives. Various coating machines, machine presses and calendering equipment are used.

Acrylic fibers are synthetic fibers made from a polymer (polyacrylonitrile) with an average molecular weight of ~100,000, about 1900 monomer units. For a fiber to be called "acrylic" in the US, the polymer must contain at least 85% acrylonitrile monomer. Typical comonomers are vinyl acetate or methyl acrylate. DuPont created the first acrylic fibers in 1941 and trademarked them under the name Orlon. It was first developed in the mid-1940s but was not produced in large quantities until the 1950s. Strong and warm, acrylic fiber is often used for sweaters and tracksuits and as linings for boots and gloves, as well as in furnishing fabrics and carpets. It is manufactured as a filament, then cut into short staple lengths similar to wool hairs, and spun into yarn.

Dynel is a trade name for a type of synthetic fiber used in fibre reinforced plastic composite materials, especially for marine applications. As it is easily dyed, it was also used to fabricate wigs. The fashion designer Pierre Cardin used Dynel fabric to make a collection of heat-molded dresses in 1968. A copolymer of acrylonitrile and vinyl chloride, Dynel shares many properties with both polyacrylonitrile and PVC. It is an acrylic resin.

Polybenzimidazole (PBI, short for poly[2,2’-(m-phenylen)-5,5’-bisbenzimidazole]) fiber is a synthetic fiber with a very high decomposition temperature. It does not exhibit a melting point, it has exceptional thermal and chemical stability, and it does not readily ignite. It was first discovered by American polymer chemist Carl Shipp Marvel in the pursuit of new materials with superior stability, retention of stiffness, and toughness at elevated temperature. Due to its high stability, polybenzimidazole is used to fabricate high-performance protective apparel such as firefighter's gear, astronaut space suits, high temperature protective gloves, welders’ apparel and aircraft wall fabrics. Polybenzimidazole has been applied as a membrane in fuel cells.

Thinsulate is a brand of synthetic fiber thermal insulation used in clothing. The word is a portmanteau of the words thin and insulate, trademarked by 3M. The material is made by the 3M Corporation and was first sold in 1979. It was originally marketed as an inexpensive alternative to down; at the time, 3M claimed it was twice as warm as an equivalent amount of any natural material.

<span class="mw-page-title-main">Acrylate polymer</span> Group of polymers prepared from acrylate monomers

An acrylate polymer is any of a group of polymers prepared from acrylate monomers. These plastics are noted for their transparency, resistance to breakage, and elasticity.

Olefin fiber is a synthetic fiber made from a polyolefin, such as polypropylene or polyethylene. It is used in wallpaper, carpeting, ropes, and vehicle interiors.

Fire-retardant fabrics are textiles that are more resistant to fire than others through chemical treatment of flame-retardant or manufactured fireproof fibers.

"Technical textile" refers to a category of textiles specifically engineered and manufactured to serve functional purposes beyond traditional apparel and home furnishing applications. These textiles are designed with specific performance characteristics and properties, making them suitable for various industrial, medical, automotive, aerospace, and other technical applications. Unlike conventional textiles used for clothing or decoration, technical textiles are optimized to offer qualities such as strength, durability, flame resistance, chemical resistance, moisture management, and other specialized functionalities to meet the specific needs of diverse industries and sectors.

A superabsorbent polymer (SAP) (also called slush powder) is a water-absorbing hydrophilic homopolymers or copolymers that can absorb and retain extremely large amounts of a liquid relative to its own mass.

<span class="mw-page-title-main">Building insulation material</span> Insulation material

Building insulation materials are the building materials that form the thermal envelope of a building or otherwise reduce heat transfer.

A fabric structure is a structure made of fabric, with or without a structural frame made from the weaving of the fabric itself. The technology provides end users a variety of aesthetic free-form building designs. Custom-made structures are engineered and fabricated to meet worldwide structural, flame retardant, weather-resistant, and natural force requirements. Fabric structures are considered a sub-category of tensile structure.

Fire-safe polymers are polymers that are resistant to degradation at high temperatures. There is need for fire-resistant polymers in the construction of small, enclosed spaces such as skyscrapers, boats, and airplane cabins. In these tight spaces, ability to escape in the event of a fire is compromised, increasing fire risk. In fact, some studies report that about 20% of victims of airplane crashes are killed not by the crash itself but by ensuing fires. Fire-safe polymers also find application as adhesives in aerospace materials, insulation for electronics, and in military materials such as canvas tenting.

Wet Processing Engineering is one of the major streams in Textile Engineering or Textile manufacturing which refers to the engineering of textile chemical processes and associated applied science. The other three streams in textile engineering are yarn engineering, fabric engineering, and apparel engineering. The processes of this stream are involved or carried out in an aqueous stage. Hence, it is called a wet process which usually covers pre-treatment, dyeing, printing, and finishing.

Acrylonitrile styrene acrylate (ASA), also called acrylic styrene acrylonitrile, is an amorphous thermoplastic developed as an alternative to acrylonitrile butadiene styrene (ABS), that has improved weather resistance. It is an acrylate rubber-modified styrene acrylonitrile copolymer. It is used for general prototyping in 3D printing, where its UV resistance and mechanical properties make it an excellent material for use in fused filament fabrication printers, particularly for outdoor applications. ASA is also widely used in the automotive industry.

<span class="mw-page-title-main">Kaneka Corporation</span> Japanese chemical manufacturing company

Kaneka Corporation is a Japanese international chemical manufacturing company based in Osaka. The company was founded in 1949 and produces chemical products such as functional resin, foam resin, and synthetic fibers.

Fabric treatments are processes that make fabric softer, or water resistant, or enhance dye penetration after they are woven. Fabric treatments get applied when the textile itself cannot add other properties. Treatments include, scrim, foam lamination, fabric protector or stain repellent, anti microbial and flame retardant.

Textile performance, also known as fitness for purpose, is a textile's capacity to withstand various conditions, environments, and hazards, qualifying it for particular uses. The performance of textile products influences their appearance, comfort, durability, and protection. Different textile applications require a different set of performance parameters. As a result, the specifications determine the level of performance of a textile product. Textile testing certifies the product's conformity to buying specification. It describes product manufactured for non-aesthetic purposes, where fitness for purpose is the primary criterion. Engineering of high-performance fabrics presents a unique set of challenges.

References

↑ Modacrylic. Columbia Encyclopedia. 20 June 2006. http://www.bartleby.com/65/mo/modacryl.html Archived 2007-02-12 at the Wayback Machine
↑ "Textile Reference Manual: What's the Story Behind These Fibers Called Modacrylics". Archived from the original on 2006-03-13. Retrieved 2007-06-25.
1 2 3 4 5 Kadolph, S.J & Langford, A.L. (2002). Textiles 9th Edition. New Jersey: Pearson Education, Inc. (pp. 118).
↑ "Synthetic Fibers | KANEKA CORPORATION". Archived from the original on 2008-05-01. Retrieved 2008-03-27.
↑ "Modacrylic Fiber - Modacrylic Staple Fiber, Modacrylic Tow Fiber". Archived from the original on 2010-03-28. Retrieved 2007-08-14.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[Columbia-1] Modacrylic. Columbia Encyclopedia. 20 June 2006. http://www.bartleby.com/65/mo/modacryl.html Archived 2007-02-12 at the Wayback Machine

[2] "Textile Reference Manual: What's the Story Behind These Fibers Called Modacrylics". Archived from the original on 2006-03-13. Retrieved 2007-06-25.

[Kadolph-3] 1 2 3 4 5 Kadolph, S.J & Langford, A.L. (2002). Textiles 9th Edition. New Jersey: Pearson Education, Inc. (pp. 118).

[4] "Synthetic Fibers | KANEKA CORPORATION". Archived from the original on 2008-05-01. Retrieved 2008-03-27.

[5] "Modacrylic Fiber - Modacrylic Staple Fiber, Modacrylic Tow Fiber". Archived from the original on 2010-03-28. Retrieved 2007-08-14.

[1]

[2]

[3]

[4]

[5]