Related Research Articles
Under the Whyte notation for the classification of steam locomotives, a 2-10-4 locomotive has two leading wheels on one axle, usually in a Bissel truck, ten coupled driving wheels on five axles, and four trailing wheels on two axles, usually in a bogie. These were referred to as the Texas type in most of the United States, the Colorado type on the Burlington Route, and the Selkirk type in Canada.
Under the Whyte notation for the classification of steam locomotives, 2-10-0 represents the wheel arrangement of two leading wheels on one axle, ten powered and coupled driving wheels on five axles, and no trailing wheels. This arrangement was often named Decapod, especially in the United States, although this name was sometimes applied to locomotives of 0-10-0 "Ten-Coupled" arrangement, particularly in the United Kingdom. Notable German locomotives of this type include the war locomotives of Class 52.
Locomotive classification on the Pennsylvania Railroad took several forms. Early on, steam locomotives were given single-letter classes. As the 26 letters were quickly assigned, that scheme was abandoned for a more complex system. This was used for all of the PRR's steam locomotives, and — with the exception of the final type bought — all electric locomotives also used this scheme.
The Pennsylvania Railroad (PRR) K4 4-6-2 "Pacific" was its premier passenger-hauling steam locomotive from 1914 through the end of steam on the PRR in 1957.
The Pennsylvania Railroad's class H8, H9s and H10s steam locomotives were of the 2-8-0 "Consolidation" type, the last three classes of such built by the railroad. The three classes differed only in cylinder diameter and thus tractive effort, each subsequent class increasing that measurement by an inch. The first H8 was built in 1907 and the last H10 in 1916; within a few years they were replaced on heavy freight assignments by 2-8-2s and 2-10-0. They became the railroad's standard light freight locomotive, replacing all other class H 2-8-0s, and a number remained in service until the end of PRR steam locomotive operation in 1957. 968 class H8 of various subclasses were constructed, along with 274 class H9s and 273 class H10s. A number of H8 locomotives were rebuilt to H9s specification.
The Pennsylvania-Reading Seashore Lines was a railroad that operated in South Jersey in the 20th century. It was created in 1933 as a joint consolidation venture between two competing railroads in the region: the Pennsylvania Railroad and the Reading Company.
The London and North Eastern Railway Gresley Classes A1 and A3 locomotives represented two distinct stages in the history of the British 4-6-2 "Pacific" steam locomotives designed by Nigel Gresley. They were designed for main line passenger services and later express passenger services, initially on the Great Northern Railway (GNR), a constituent company of the London and North Eastern Railway after the amalgamation of 1923, for which they became a standard design. The change in class designation to A3 reflected the fitting to the same chassis of a higher pressure boiler with a greater superheating surface and a small reduction in cylinder diameter, leading to an increase in locomotive weight. Eventually all of the A1 locomotives were rebuilt, most to A3 specifications, but no. 4470 was completely rebuilt as Class A1/1.
The Pennsylvania Railroad's class O1 comprised eight experimental boxcab electric locomotives built in 1930 and 1931. They were built in preparation for the New York to Washington Electrification project. They had the wheel arrangement classified as 4-4-4 in the Whyte notation. Although successful, they were not powerful enough for the railroad's increasingly heavy trains. For production, the PRR chose to concentrate on the P5 class, effectively an enlarged and more powerful version of the O1 with an additional pair of driving wheels.
Pennsylvania Railroad class E2b comprised six experimental B-B electric locomotives built for the railroad by General Electric.
The Pennsylvania Railroad's class B1 comprised 42 electric switcher locomotives built between 1926 and 1935. They were of 0-6-0 wheel arrangement in the Whyte notation with 700 horsepower. As built, the first 28 locomotives in the 1926 order formed semi-permanently coupled pairs grouped in three classes.
Pennsylvania Railroad's Odd D #10003 was an experimental electric locomotive built in 1907 by Baldwin and Westinghouse. It had a 4-4-0 wheel arrangement in the Whyte notation, or 2-B in the AAR scheme. On the PRR, class D was assigned to 4-4-0 locomotives. Production classes of locomotive were assigned a number after the letter, but one-off locomotives were simply designated "Odd".
Class D16 on the Pennsylvania Railroad was their final development of the 4-4-0 "American" type of steam locomotive. A total of 429 of these locomotives were built at the PRR's Juniata Shops, spread across five subclasses; some had 80 in (2,030 mm) diameter driving wheels for service in level territory, while others had 68 in (1,730 mm) drivers for mountainous terrain. In the pre-1895 scheme, these locomotives were second class L.
Class D7 (formerly Class A (anthracite), pre-1895) on the Pennsylvania Railroad was a class of 4-4-0 steam locomotive. Fifty-eight were built by the PRR's Altoona Works (now owned by Norfolk Southern) between 1882–1891 with 68 in (1.73 m) drivers, while sixty-one of class D7a were constructed with 62 in (1.57 m) drivers.
The Pennsylvania Railroad's steam locomotive class D1 comprised thirteen 4-4-0 locomotives for express passenger service, constructed at the railroad's own Altoona Works during 1868–1872. They were the first standardized class of locomotives on the railroad and shared many parts with other standard classes.
The Pennsylvania Railroad's steam locomotive class D2 comprised twenty 4-4-0 locomotives intended for mountain passenger helper service, constructed at the railroad's own Altoona Works during 1869–1880. They were the second standardized class of locomotives on the railroad and shared many parts with other standard classes.
The Pennsylvania Railroad (PRR) class CC1s consisted of a single experimental 0-8-8-0 steam locomotive built by Baldwin Locomotive Works in 1912. It was assigned road number #3397 and placed in service at the PRR Pitcairn yard in Pitcairn, Pennsylvania, near Pittsburgh. A subsequent class, the CC2s, was constructed after the tests conducted with this locomotive. Finding little advantage to articulated steam locomotives, the PRR scrapped it in 1932.
The PRR C1 was the Pennsylvania Railroad's class of 0-8-0 steam locomotive, used in switching service. The 0-8-0 was common on most railroads, but not on PRR; when the railroad needed bigger motive power, they used the 2-8-0 "Consolidation". The PRR wanted the best motive power to handle the switching chores at rail yards and interchanges, and the C1 class was the heaviest two-cylinder 0-8-0 switcher ever produced. Calculated tractive effort was 76,154 lb, based on 78% MEP with 60% maximum cutoff. All C1s were retired between 1948 and 1953, none being preserved.
The Pennsylvania Railroad's class H6, H6a, and H6b steam locomotives were of the 2-8-0 "Consolidation" freight type, the most numerous class on the railroad with 1,707 units and the second most prolific 2-8-0 class in North America, with the USATC S160 class rostering 88 units more. The three subclasses differed as follows:
The Pennsylvania Railroad's class A5s was the most powerful class of 0-4-0 steam locomotives. The Pennsylvania Railroad built 47 in its Juniata Shops between 1916–1924. They were all retired by 1957. One is preserved at the Railroad Museum of Pennsylvania.
The Pennsylvania Railroad (PRR) class CC2s consisted of ten 0-8-8-0 compound articulated (Mallet) type of steam locomotive built by Baldwin Locomotive Works in 1919 for PRR. These were used for transfer runs, and used for switching as "yard hump" power.
References
- ↑ "PRR Steam Roster". North East Rails. Retrieved 9 February 2024.
