Soil stabilization

Last updated

Soil stabilization is a general term for any physical, chemical, mechanical, biological, or combined method of changing a natural soil to meet an engineering purpose. [1] Improvements include increasing the weight-bearing capabilities, tensile strength, and overall performance of unstable subsoils, sands, and waste materials in order to strengthen road pavements.

Contents

Some renewable technologies are enzymes, surfactants, biopolymers, synthetic polymers, co-polymer-based products, cross-linking styrene acrylic polymers, tree resins, ionic stabilizers, fiber reinforcement, calcium chloride, calcite, sodium chloride, magnesium chloride, and more. Some of these new stabilizing techniques create hydrophobic surfaces and mass that prevent road failure from water penetration or heavy frosts by inhibiting the ingress of water into the treated layer.

However, recent technology has increased the number of traditional additives used for soil stabilization purposes. Such non-traditional stabilizers include polymer-based products (e.g. cross-linking water-based styrene acrylic polymers that significantly improve the load-bearing capacity and tensile strength of treated soils), Copolymer Based Products, fiber reinforcement, calcium chloride, and Sodium Chloride.

Soil can also be stabilized mechanically with stabilization geosynthetics, for example, geogrids or geocells, a 3D mechanical soil stabilization technique. Stabilization is achieved via the confinement of particle movement to improve the strength of the entire layer. Confinement in geogrids is by means of interlock between the aggregate and grid (and tensioned membrane), and in geocells, by cell wall confinement (hoop) stress on the aggregate. [2]

Traditionally and widely accepted types of soil stabilization techniques use products such as bitumen emulsions which can be used as binding agents for producing a road base. However, bitumen is not an environmentally friendly product and becomes brittle when it dries out. Portland cement has been used as an alternative to soil stabilization. However, this can often be an expensive component and not an Environmentally friendly alternative. Cement fly ash, lime fly ash (separately, or with cement or lime), bitumen, tar, cement kiln dust (CKD), tree resin, and ionic stabilizers are all commonly used stabilizing agents. Other stabilization techniques include using on-site materials including subsoils, sands, mining waste, natural stone industry waste, [3] and crushed construction waste to provide stable, dust-free local roads for complete dust control and soil stabilization.

Many environmentally friendly alternatives have essentially the same formula as soap powders, merely lubricating and realigning the soil with no effective binding property. Many of the new approaches rely on large amounts of clay with its inherent binding properties. Bitumen, tar emulsions, asphalt, cement, and lime can be used as binding agents for producing a road base.

The National Society of Professional Engineers (NSPE) has explored newer types of soil stabilization technology, looking for effective and non-harmful alternatives. One alternative utilizes new soil stabilization technology, a process based on cross-linking styrene acrylic polymer. Another alternative uses long crystals to create a closed cell formation that is impermeable to water, frost, acid, and salt.

Utilizing new soil stabilization technology, a process of cross-linking within the polymeric formulation can replace traditional road/house construction methods in an environmentally friendly and effective way.

Another soil stabilization method called the Deep Mixing Method is non-destructive and effective at improving load bearing capacity of weak or loose soil strata. This method uses a small, penny-sized injection probe and minimizes debris and is ideal for re-compaction and consolidation of weak soil strata, increasing and improving load-bearing capacity under structures, and the remediation of shallow and deep sinkhole problems. This is particularly efficient when there is a need to support deficient public and private infrastructure.

Magnesium chloride

Water-absorbing magnesium chloride (deliquescent) attributes include

  1. Absorbing water from the air at 32% relative humidity, almost independent of temperature
  2. Treated roads can be regraded and re-compacted with less concern for losing moisture and density

However, limitations include

  1. Minimum humidity level
  2. Better suited for drier climates
  3. Concentrated solutions become very corrosive,
  4. Moisture attraction, thereby prolonging the active period for corrosion
  5. High fines content in treated material may become slippery when wet
  6. When less than 20% solution it has performance effectiveness similar to water [4] [5]

The use of magnesium chloride on roads remains controversial. Advocates claim (1) cleaner air, which leads to better health as fugitive dust can cause health problems in the young, elderly, and people with respiratory conditions; [6] and (2) Greater safety through improved road conditions, [7] [8] including increased driver visibility and decreased risks caused by loose gravel, soft spots, road roughness, and flying rocks. [9] It reduces foreign sediment in nearby surface waters [10] (dust that settles in creeks and streams), helps prevent stunted crop growth caused by clogged pores in plants, and keeps vehicles and property clean. [11] Other studies show the use of salts for road deicing or dust suppressing can contribute substantial amounts of chloride ions to runoff from the surface of roads treated with the compounds. The salts MgCl2 (and CaCl2) are very soluble in water and will dissociate. [12] The salts, when used on road surfaces, will dissolve during wet weather and be transported into the groundwater through infiltration and/or runoff into surface water bodies. [8] Groundwater infiltration can be a problem and the chloride ion in drinking water is considered a problem when concentrations exceed 250 mg/L. It is therefore regulated by the United States' EPA’s drinking water standards. The chloride concentration in the groundwater or surface water depends on several factors including:

  1. Application rate
  2. Composition and type of soil
  3. Type, intensity, and amount of precipitation
  4. Road system drainage [13]

In addition, the chloride concentration in the surface water also depends on the size or flow rate of the water body and the resulting dilution achieved. In a chloride concentration study carried out in Wisconsin during a winter de-icing period, runoff from roadside drainages was analyzed. All studies indicated that the chloride concentration increased as a result of de-icing activities, but the levels were still below the MCL of 250 mg/L set by the EPA. [14] [15] [16] [17] [18] Nevertheless, the long-term effect of this exposure is not known.

Although the U.S. EPA has set the maximum chloride concentration in water for domestic use at 250 mg/L animals can tolerate higher levels. At excessively high levels, chloride is said to affect the health of animals. [19] As stated by the National Technical Advisory Committee to the Secretary of Interior (1968), “Salinity may have a two-fold effect on wildlife; a direct one affecting the body processes of the species involved and an indirect one altering the environment making living species perpetuation difficult or impossible.” One major problem associated with the use of de-icing salt as far as wildlife is concerned is that wildlife is known to have “salt craving” and therefore are attracted to salted highways which can be a traffic hazard to both the animals and motorists.

Regarding the accumulation of chloride salts in roadside soils including the adverse effects on roadside plants and vegetation physiology and morphology, documentation dates back to the World War II era [20] and consistently continues forward to present times. [21] As far as plants and vegetation are concerned, the accumulation of salts in the soil adversely affects their physiology and morphology by increasing the osmotic pressure of the soil solution, altering the plant’s mineral nutrition, and accumulating specific ions to toxic concentrations in the plants. (Regarding the intentional application of excessive salts, see Salting the Earth).

Road departments and private industry may apply liquid or powdered magnesium chloride to control dust and erosion on unimproved (dirt or gravel) roads and dusty job sites such as quarries because it is relatively inexpensive to purchase and apply. Its hygroscopy makes it absorb moisture from the air, limiting the number of smaller particles (silts and clays) that become airborne. The most significant benefit of applying dust control products is the reduction in gravel road maintenance costs. [22] However, recent research and updates indicate biological toxicity in the environment in plants is an ongoing problem. [21] Since 2001, truckers have complained about "killer chemicals" on roads and now some states are backing away from using salt products. [23] [24]

A small percentage of owners of indoor arenas (for example, for horse riding) may apply magnesium chloride to sand or other "footing" materials to control dust. Although magnesium chloride used in an equestrian (horse) arena environment is generally referred to as a dust suppressant it is technically more accurate to consider it as a water augmentation activity since its performance is based on absorbing moisture from the air and from whatever else comes in contact with it.

To control or mitigate dust, chlorides need moisture to work effectively so it works better in humid than in arid climates. As the humidity increases the chloride draws moisture out of the air to keep the surface damp and as humidity decreases it diffuses and releases moisture. These naturally occurring equilibrium changes also allow chlorides to also be used as a dehydrating agent including the drying out of and curing and preservation of hides. [25]

As a road stabilizer, magnesium chloride binds gravel and clay particles to keep them from leaving the road. The water-absorbing (hygroscopic) characteristics of magnesium chloride prevent the road from drying out, which keeps gravel on the ground. The road remains continually "wet" as if a water truck had just sprayed the road. [26]

See also

Related Research Articles

<span class="mw-page-title-main">Reinforced concrete</span> Concrete with rebar

Reinforced concrete, also called ferroconcrete, is a composite material in which concrete's relatively low tensile strength and ductility are compensated for by the inclusion of reinforcement having higher tensile strength or ductility. The reinforcement is usually, though not necessarily, steel bars (rebar) and is usually embedded passively in the concrete before the concrete sets. However, post-tensioning is also employed as a technique to reinforce the concrete. In terms of volume used annually, it is one of the most common engineering materials. In corrosion engineering terms, when designed correctly, the alkalinity of the concrete protects the steel rebar from corrosion.

<span class="mw-page-title-main">Soil salinity</span> Salt content in the soil

Soil salinity is the salt content in the soil; the process of increasing the salt content is known as salinization. Salts occur naturally within soils and water. Salination can be caused by natural processes such as mineral weathering or by the gradual withdrawal of an ocean. It can also come about through artificial processes such as irrigation and road salt.

The term chloride refers to a compound or molecule that contains either a chlorine ion, which is a negatively charged chlorine atom, or a non-charged chlorine atom covalently bonded to the rest of the molecule by a single bond. Many inorganic chlorides are salts. Many organic compounds are chlorides. The pronunciation of the word "chloride" is.

<span class="mw-page-title-main">Sodium chloride</span> Chemical compound with formula NaCl

Sodium chloride, commonly known as edible salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chlorine ions. In its edible form, it is commonly used as a condiment and food preservative. Large quantities of sodium chloride are used in many industrial processes, and it is a major source of sodium and chlorine compounds used as feedstocks for further chemical syntheses. Another major application of sodium chloride is deicing of roadways in sub-freezing weather.

Fluoride is an inorganic, monatomic anion of fluorine, with the chemical formula F−
, whose salts are typically white or colorless. Fluoride salts typically have distinctive bitter tastes, and are odorless. Its salts and minerals are important chemical reagents and industrial chemicals, mainly used in the production of hydrogen fluoride for fluorocarbons. Fluoride is classified as a weak base since it only partially associates in solution, but concentrated fluoride is corrosive and can attack the skin.

A period 3 element is one of the chemical elements in the third row of the periodic table of the chemical elements. The periodic table is laid out in rows to illustrate recurring (periodic) trends in the chemical behavior of the elements as their atomic number increases: a new row is begun when chemical behavior begins to repeat, meaning that elements with similar behavior fall into the same vertical columns. The third period contains eight elements: sodium, magnesium, aluminium, silicon, phosphorus, sulfur, chlorine and argon. The first two, sodium and magnesium, are members of the s-block of the periodic table, while the others are members of the p-block. All of the period 3 elements occur in nature and have at least one stable isotope.

<span class="mw-page-title-main">Water purification</span> Process of removing impurities from water

Water purification is the process of removing undesirable chemicals, biological contaminants, suspended solids, and gases from water. The goal is to produce water that is fit for specific purposes. Most water is purified and disinfected for human consumption, but water purification may also be carried out for a variety of other purposes, including medical, pharmacological, chemical, and industrial applications. The history of water purification includes a wide variety of methods. The methods used include physical processes such as filtration, sedimentation, and distillation; biological processes such as slow sand filters or biologically active carbon; chemical processes such as flocculation and chlorination; and the use of electromagnetic radiation such as ultraviolet light.

<span class="mw-page-title-main">Magnesium sulfate</span> Chemical compound with formula MgSO4

Magnesium sulfate or magnesium sulphate is a chemical compound, a salt with the formula MgSO4, consisting of magnesium cations Mg2+ (20.19% by mass) and sulfate anions SO2−4. It is a white crystalline solid, soluble in water but not in ethanol.

<span class="mw-page-title-main">Calcium chloride</span> Chemical compound

Calcium chloride is an inorganic compound, a salt with the chemical formula CaCl2. It is a white crystalline solid at room temperature, and it is highly soluble in water. It can be created by neutralising hydrochloric acid with calcium hydroxide.

<span class="mw-page-title-main">Environmental remediation</span> Removal of pollution from soil, groundwater etc.

Environmental remediation is the cleanup of hazardous substances dealing with the removal, treatment and containment of pollution or contaminants from environmental media such as soil, groundwater, sediment. Remediation may be required by regulations before development of land revitalization projects. Developers who agree to voluntary cleanup may be offered incentives under state or municipal programs like New York State's Brownfield Cleanup Program. If remediation is done by removal the waste materials are simply transported off-site for disposal at another location. The waste material can also be contained by physical barriers like slurry walls. The use of slurry walls is well-established in the construction industry. The application of (low) pressure grouting, used to mitigate soil liquefaction risks in San Francisco and other earthquake zones, has achieved mixed results in field tests to create barriers, and site-specific results depend upon many variable conditions that can greatly impact outcomes.

<span class="mw-page-title-main">Permeable paving</span> Roads built with water-pervious materials

Permeable paving surfaces are made of either a porous material that enables stormwater to flow through it or nonporous blocks spaced so that water can flow between the gaps. Permeable paving can also include a variety of surfacing techniques for roads, parking lots, and pedestrian walkways. Permeable pavement surfaces may be composed of; pervious concrete, porous asphalt, paving stones, or interlocking pavers. Unlike traditional impervious paving materials such as concrete and asphalt, permeable paving systems allow stormwater to percolate and infiltrate through the pavement and into the aggregate layers and/or soil below. In addition to reducing surface runoff, permeable paving systems can trap suspended solids, thereby filtering pollutants from stormwater.

<span class="mw-page-title-main">Magnesium chloride</span> Inorganic salt: MgCl2 and its hydrates

Magnesium chloride is an inorganic compound with the formula MgCl2. It forms hydrates MgCl2·nH2O, where n can range from 1 to 12. These salts are colorless or white solids that are highly soluble in water. These compounds and their solutions, both of which occur in nature, have a variety of practical uses. Anhydrous magnesium chloride is the principal precursor to magnesium metal, which is produced on a large scale. Hydrated magnesium chloride is the form most readily available.

<span class="mw-page-title-main">Perchlorate</span> Ion, and compounds containing the ion

A perchlorate is a chemical compound containing the perchlorate ion, ClO4−, the conjugate base of perchloric acid (ionic perchlorate). As counterions, there can be metal cations, quaternary ammonium cations or other ions, for example, nitronium cation (NO2+).

<span class="mw-page-title-main">Water softening</span> Removing positive ions from hard water

Water softening is the removal of calcium, magnesium, and certain other metal cations in hard water. The resulting soft water requires less soap for the same cleaning effort, as soap is not wasted bonding with calcium ions. Soft water also extends the lifetime of plumbing by reducing or eliminating scale build-up in pipes and fittings. Water softening is usually achieved using lime softening or ion-exchange resins, but is increasingly being accomplished using nanofiltration or reverse osmosis membranes.

<span class="mw-page-title-main">Deicing</span> Process of removing ice, snow, or frost from a surface

Deicing is the process of removing snow, ice or frost from a surface. Anti-icing is the application of chemicals that not only deice but also remain on a surface and continue to delay the reformation of ice for a certain period of time, or prevent adhesion of ice to make mechanical removal easier.

<span class="mw-page-title-main">Gravel road</span> Type of unpaved road surfaced with gravel

A gravel road is a type of unpaved road surfaced with gravel that has been brought to the site from a quarry or stream bed. Gravel roads are common in less-developed nations, and also in the rural areas of developed nations such as Canada and the United States. In New Zealand, and other Commonwealth countries, they may be known as metal roads. They may be referred to as "dirt roads" in common speech, but that term is used more for unimproved roads with no surface material added. If well constructed and maintained, a gravel road is an all-weather road.

<span class="mw-page-title-main">Total dissolved solids</span> Measurement in environmental chemistry

Total dissolved solids (TDS) is a measure of the dissolved combined content of all inorganic and organic substances present in a liquid in molecular, ionized, or micro-granular suspended form. TDS are often measured in parts per million (ppm). TDS in water can be measured using a digital meter.

A pyrotechnic composition is a substance or mixture of substances designed to produce an effect by heat, light, sound, gas/smoke or a combination of these, as a result of non-detonative self-sustaining exothermic chemical reactions. Pyrotechnic substances do not rely on oxygen from external sources to sustain the reaction.

<span class="mw-page-title-main">Alkali soil</span> Soil type with pH > 8.5

Alkali, or Alkaline, soils are clay soils with high pH, a poor soil structure and a low infiltration capacity. Often they have a hard calcareous layer at 0.5 to 1 metre depth. Alkali soils owe their unfavorable physico-chemical properties mainly to the dominating presence of sodium carbonate, which causes the soil to swell and difficult to clarify/settle. They derive their name from the alkali metal group of elements, to which sodium belongs, and which can induce basicity. Sometimes these soils are also referred to as alkaline sodic soils. Alkaline soils are basic, but not all basic soils are alkaline.

<span class="mw-page-title-main">Freshwater salinization</span> Salty runoff contaminating freshwater ecosystems

Freshwater salinization is the process of salty runoff contaminating freshwater ecosystems, which can harm aquatic species in certain quantities and contaminate drinking water. It is often measured by the increased amount of dissolved minerals than what is considered usual for the area being observed. Naturally occurring salinization is referred to as primary salinization; this includes rainfall, rock weathering, seawater intrusion, and aerosol deposits. Human-induced salinization is termed as secondary salinization, with the use of de-icing road salts as the most common form of runoff. Approximately 37% of the drainage in the United States has been affected by salinization in the past century. The EPA has defined two thresholds for healthy salinity levels in freshwater ecosystems: 230 mg/L Cl− for average salinity levels and 860 mg/L Cl− for acute inputs.

References

  1. ↑ Winterkorn, Hans F. and Sibel Pamukcu. "Soil stabilization and Grouting", Foundation Engineering Handbook. Fang, Hsai, ed. 2.nd ed. New York, NY: VanNostrand Reinhold, 1991. 317. Print.
  2. ↑ Vega, E., van Gurp, C., Kwast, E. (2018). Geokunststoffen als Funderingswapening in Ongebonden Funderingslagen (Geosynthetics for Reinforcement of Unbound Base and Subbase Pavement Layers), SBRCURnet (CROW), Netherlands.
  3. ↑ Gutiérrez, Erick; Riquelme, Adrián; Cano, Miguel; Tomás, Roberto; Pastor, José Luis (January 2019). "Evaluation of the Improvement Effect of Limestone Powder Waste in the Stabilization of Swelling Clayey Soil". Sustainability. 11 (3): 679. doi: 10.3390/su11030679 . hdl: 10045/87249 .
  4. ↑ "Dust Palliative Selection and Application Guide". Fs.fed.us. Retrieved 2017-10-18.
  5. ↑ Dust Palliative Selection and Application Guide
  6. ↑ Schwendeman, T., Dust Control Study, Dust Palliative Evaluation, Gallatin National Forest”, USDA Forest Service, 1981
  7. ↑ "Archived copy" (PDF). Archived from the original (PDF) on 2016-03-04. Retrieved 2017-09-09.{{cite web}}: CS1 maint: archived copy as title (link)
  8. 1 2 "Road Dust Suppression: Effect on Maintenance Stability, Safety and the Environment Phases 1-3 (MPC-04-156)" (PDF). Retrieved 2017-10-18.
  9. ↑ Lohnes, R.A. and Coree, B.J., Determination and Evaluation of Alternate Methods for Managing and Controlling Highway-related Dust, Dept of Civil and Construction Engineering, Iowa State University, 2002
  10. ↑ Hass, R.A., “Dustproofing Unsurfaced Tank Trails Grafenwohr Training Area, Federal Republic of Germany. June 15–29, 1985.” U. S. Army Corps of Engineers, Paper GL-86-40, 1986; the appendix of this report summarized the environmental effects of the use of magnesium chloride, saying: "A comprehensive literature search (Toxline, Medline, Chemline, Hazard Lie, Biological Abstracts, Toxic Data Bank and other available sources) was made. There appears to be no reported evidence that MgCl2 has had or will produce any effects on the groundwater, the water table, or vegetation following single or repeated applications to soil."
  11. ↑ Han, C. Dust Control on Unpaved Roads, Minnesota Local Road Research Board, 1992
  12. ↑ Snoeyink, V.L. and D. Jenkins. Water Chemistry. John Wiley & Sons, Inc., New York. 1980
  13. ↑ Pollock, S.J., and L.G. Toler. Effects of Highway Deicing Salts on Groundwater and Water Supplies in Massachusetts. Highway Research Board, No. 425 17-21. 1973
  14. ↑ Schraufnagel, F.H. Chlorides. Commission on Water Pollution, Madison, Wisconsin. 1965.
  15. ↑ Hutchinson, F.E. The Influences of Salts Applied to Highways on the Levels of Sodium and Chloride Ions Present in Water and Soil Samples – Progress Report I. Project No. R1084-8. 1966.
  16. ↑ Pollock, S.J., and L.G. Toler. Effects of Highway Deicing Salts on Groundwater and Water Supplies in Massachusetts. Highway Research Board, No. 425 17-21. 1973.
  17. ↑ Hutchinson, F.E. The Influences of Salts Applied to Highways on the Levels of Sodium and Chloride Ions Present in Water and Soil Samples – Progress Report I. Project No.R1084-8. 1966.
  18. ↑ Schraufnagel, F.H. Chlorides. Commission on Water Pollution, Madison, Wisconsin. 1965
  19. ↑ Heller, V.G. “Saline and Alkaline Drinking Waters.” Journal of Nutrition, 5:421-429 1932
  20. ↑ Strong, F.C. A Study of Calcium Chloride Injury to Roadside Trees. Michigan Agr. Exp. Station, Quarterly Bulletin, 27:209-224. 1944
  21. 1 2 "Publications - ExtensionExtension". Ext.colostate.edu. Retrieved 2017-10-18.
  22. ↑ "About the Office of Water | About EPA | US EPA" (PDF). Epa.gov. 2013-01-29. Retrieved 2017-10-18.
  23. ↑ Lockridge, Deborah (2011-12-13). "Some states are backing away from 'killer chemical' de-icers - All That's Trucking". TruckingInfo.com. Retrieved 2017-10-18.
  24. ↑ "September 2001 Issue - TruckingInfo.com Magazine". Truckinginfo.com. Retrieved 2017-10-18.
  25. ↑ "Archived copy" (PDF). wyndmoor.arserrc.gov. Archived from the original (PDF) on 24 December 2010. Retrieved 22 May 2022.{{cite web}}: CS1 maint: archived copy as title (link)
  26. ↑ "Archived copy" (PDF). Archived from the original (PDF) on 2012-06-19. Retrieved 2013-02-28.{{cite web}}: CS1 maint: archived copy as title (link)
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.