Stour watermills

Last updated

River Stour and tributaries River Stour Map.jpg
River Stour and tributaries

The River Stour has been used for centuries as a source of power. Many different processes were performed by the use of water power:- Corn milling, fulling, paper making and electricity generation. Many of the mills survive today as house conversions, with two of them still working commercially.

Contents

Upper Great Stour

The upper reaches of the Great Stour powered eight watermills, with a further two on tributaries.

Chapel Mill, Lenham

TQ 903 503 51°13′12″N0°43′26″E / 51.220°N 0.724°E / 51.220; 0.724 (Chapel Mill, Lenham)

This corn mill in Lenham is the only one that was powered by the Upper Great Stour, the other watermills in Lenham were powered by the River Len. The mill building has been converted to residential use, devoid of machinery. It had a breast shot waterwheel. [1]

Bowley Mill, Boughton Malherbe

TQ 902 496 51°12′50″N0°43′19″E / 51.214°N 0.722°E / 51.214; 0.722 (Bowley Mill, Boughton Malherbe)

This corn mill in Boughton Malherbe is now a derelict ruin, with the remains of the ground floor, waterwheel and some machinery remaining. The waterwheel was overshot, some 12 feet (3.66 m) diameter and 6 feet (1.83 m) wide, carried on a 8 inches (200 mm) diameter cast-iron axle. The Pit Wheel is of cast iron, and had 96 cogs. The Upright Shaft was wood, as was the clasp arm Great Spur Wheel, which drove three pairs of millstones. [2] [3] The mill building was 30 feet (9.14 m) by 15 feet (4.57 m) in plan, and new machinery was installed in 1881. The upper floors of the mill were pulled down in the 1960s as they had become unsafe. [4]

Burnt Mill, Charing

TQ 913 492 51°12′36″N0°44′10″E / 51.210°N 0.736°E / 51.210; 0.736 (Burnt Mill, Charing)

This corn mill at Charing still remains in a derelict condition, with most of its machinery intact. The mill was working until the mid-1950s. The cast-iron waterwheel was 10 feet 4 inches (3.15 m) diameter and 5 feet (1.52 m) wide, on a 9 inches (230 mm) cast-iron axle. It bears the legend J HILL, ASHFORD, 1863. The pit wheel is 8 feet (2.44 m) diameter with 80 cogs, driving a cast-iron Wallower carried on the upright shaft and driving a 6 feet (1.83 m) diameter Great Spur Wheel which drove three pairs of millstones. A Crown Wheel drove two lineshafts. [5] The mill was run by the Tanton family for many years. [6] A John Tanton was the miller in 1764, and another John Tanton died in 1837 aged 72. [7]

Field Mill, Charing

TQ 915 483 51°12′07″N0°44′24″E / 51.202°N 0.740°E / 51.202; 0.740 (Field Mill, Charing)

This corn mill at Charing still stands, retaining a little machinery. The overshot waterwheel was 10 feet 6 inches (3.20 m) diameter and 5 feet (1.52 m) wide. It bears the legend HILL & SON ASHFORD 1877. The waterwheel is carried on a 11-inch-diameter (280 mm) cast-iron axle, driving a cast-iron Pit Wheel. All other machinery has been removed. The mill had two pairs of millstones. [8] Millers were a Mr Pay and Mr Pope from 1878 - 1892, [9] and Walter Hicks in 1892, having previously been at the windmill. [7]

Swallow Mill, Little Chart

TQ 934 469 51°11′20″N0°45′58″E / 51.189°N 0.766°E / 51.189; 0.766 (Swallow Mill, Little Chart)

This corn mill at Little Chart had an internal waterwheel. [10] The millers in the 1850s and 1860s were the Large family. [11]

Ford Mill, Little Chart

TQ 943 459 51°10′44″N0°46′44″E / 51.179°N 0.779°E / 51.179; 0.779 (Ford Mill, Little Chart)

This was a paper mill. It was in use as a paper mill as early as 1776 and took its name from the ford which was near the mill. This was replaced by a bridge in 1836. George Langley ran the mill from the 1840s until 1876. The mill was owned by the Dering Estate at Pluckley. [12] The overshot waterwheel was replaced by a turbine. [10] In 1941, the mill was switched to the manufacture of flong for the Daily Express newspaper. Changing economic conditions meant that flong manufacture ceased in 1986. [12]

Worten Mill, Godinton

TQ 970 435 51°09′25″N0°48′58″E / 51.157°N 0.816°E / 51.157; 0.816 (Worten Mill, Godinton)

The mill at Godinton was a corn mill. The building survives, converted to residential use and was the former home of Victor Ross, chairman of Reader's Digest. This is one of the oldest mills in Kent, recorded in a charter in 762, and is Grade II listed. [13] The waterwheel, although in a poor state of repair, is still in the building. [14]

Buxford Mill, Great Chart

TQ 989 426 51°08′53″N0°50′31″E / 51.148°N 0.842°E / 51.148; 0.842 (Bucksford Mill, Godinton)

Buxford Mill ceased operating as a corn mill after the war and was changed to residential use before several attempts at making it a restaurant and hotel failed. The house was derelict for some time before it ultimately settled as a domestic residence. The house now standing was built in 1600 with numerous additions but the waterwheel and all mill workings have now gone. There is still a waterfall and sluice adjacent to the house but old maps suggest that the wheel was located inside the current granary and there is evidence of an outflow emerging from underneath the building, that has now been largely filled in. It is likely that the wheel was either breast-shot or under-shot given the relatively small fall of approximately 6 feet.

Tributaries of the Upper Great Stour

Hothfield (Potters Corner) Mill

TQ 989 450 51°10′12″N0°50′38″E / 51.170°N 0.844°E / 51.170; 0.844 (Hothfield (Potters Corner) Mill)

The corn mill to the north of Hothfield still retains most of its machinery. It stood on a stream which feeds into the Great Stour. The cast-iron overshot waterwheel is 11 feet (3.35 m) diameter and 7 feet 6 inches (2.29 m) wide, carried on a 7 inches (180 mm) square cast-iron axle, driving a cast-iron Pit Wheel with 88 cogs. This drove a cast-iron wallower carried on a 6.5 inches (170 mm) square cast-iron Upright Shaft, which also carried a 6-foot-10-inch-diameter (2.08 m) Great Spur Wheel which originally drove four pairs of millstones and latterly drove two pairs. [15]

Westwell Mill

The mill c1903 Westwell 1903.jpg
The mill c1903

TQ 992 474 51°11′28″N0°50′56″E / 51.191°N 0.849°E / 51.191; 0.849 (Westwell Mill) This corn mill at Westwell has been converted to residential use, retaining its overshot waterwheel. [16]

East Stour

The East Stour powered four watermills.

Evegate Mill, Smeeth

Evegate mill Evegate mill, Smeeth.jpg
Evegate mill

TR 063 380 51°06′14″N0°56′42″E / 51.104°N 0.945°E / 51.104; 0.945 (Evegate Mill, Smeeth)

Hanover Mill, Mersham

TR 049 391 51°06′54″N0°55′34″E / 51.115°N 0.926°E / 51.115; 0.926

The corn mill at Mersham is still engaged in the milling trade, owned by T Denne and Sons.

Swanton Mill, Mersham

TR 039 388 51°06′43″N0°54′43″E / 51.112°N 0.912°E / 51.112; 0.912 (Swanton Mill, Mersham)

This corn mill still retains its machinery. The overshot waterwheel is 8 feet 4 inches (2.54 m) wide and 6 feet 8 inches (2.03 m) diameter, driving the machinery via a cast-iron ring gear with 72 teeth. There were originally four pairs of millstones, of which two remain, driven by a system of belts and pulleys. This dates from the 1840s, when the mill was reworked by Messrs. Holman's of Canterbury. There was a twin cylinder self-condensing steam engine by Hall's of Dartford, built in 1840 which provided auxiliary power. This was dismantled and donated to the Newcomen Society in 1920. The original intention was that this would be displayed in the Science Museum, but it later passed to the Henry Ford Museum in America. [17]

Sevington Mill, Willesborough

TR 032 415 51°08′13″N0°54′11″E / 51.137°N 0.903°E / 51.137; 0.903 (Sevington Mill, Willesborough)

Sevington mill was a corn mill which had two overshot wheels driving a total of five pairs of millstones. The mill was refitted in 1852. It burnt down and was a ruin by 1939. [10]

Tributaries of the East Stour

A stream rises above Stowting and flows inte the East Stour above Evegate Mill. It powered a watermill.

Stowting Mill

TR 124 418 51°08′10″N1°02′06″E / 51.136°N 1.035°E / 51.136; 1.035 (Stowting Mill)
This millstones in the watermill were driven overdrift. [18]

Great Stour

The Great Stour powered sixteen watermills, with another on the Kennington Stream.

East Hill Mill, Ashford

TR 015 427 51°08′53″N0°52′48″E / 51.148°N 0.880°E / 51.148; 0.880 (East Hill Mill, Ashford)

This water and steam mill was a corn mill, one of those run by H.S. Pledge & Sons Ltd. The converted building survives, used as a nightclub until 2014, with a dummy waterwheel outside. It was the only watermill in Ashford, which was well supplied with windmills and steam mills.

Wye Mill

TR 049 469 51°11′04″N0°55′49″E / 51.18444°N 0.93028°E / 51.18444; 0.93028 (Wye Mill)

The mill at Wye was run for many years by the Denne family. The building survives today having been extensively restored around 2000.

Chilham Mill

TR 078 534 51°14′31″N0°58′34″E / 51.242°N 0.976°E / 51.242; 0.976 (Chilham Mill)

The large corn mill at Chilham is the best preserved on the River Stour. The waterwheel is 14 feet 6 inches (4.42 m) diameter and 7 feet 10 inches (2.39 m) wide, carried on a + section cast-iron axle of a nominal 20 inches (510 mm) diameter. This also carried a cast-iron Pit Wheel 10 feet 8 inches (3.25 m) diameter with 96 cogs driving a Wallower with 34 teeth on a cast-iron Upright Shaft carrying a cast-iron Great Spur Wheel with 114 cogs. This drove six pairs of millstones, originally all underdrift, but one of the Stone Nuts has been adapted to drive a vertical shaft which powered auxiliary machinery and drove the sixth pair of stones overdrift by belt and pulley. [19]

Chartham Corn Mill

TR 097 554 51°15′32″N1°00′14″E / 51.259°N 1.004°E / 51.259; 1.004 (Chartham Corn Mill)

The building of this corn mill at Chartham survives converted to residential use [20] and devoid of machinery. It was powered by a low breast shot waterwheel some 10 feet (3.05 m) wide. There was also a turbine some 4 feet (1.22 m) in diameter which drove a pump. [21]

Chartham Paper Mill

TR 108 549 51°15′14″N1°01′12″E / 51.254°N 1.020°E / 51.254; 1.020 (Chartham Paper Mill)

This mill is a Domesday mill. There was a fulling mill in 1438 and paper production started circa 1730. Tracing paper was discovered here after a worker accidentally added too much starch to the mixture. The paper mill is still working commercially, producing tracing paper to this day. It is owned by Arjo Wiggins. [22]

Cock Mill, Canterbury

TR 145 580 51°16′52″N1°04′26″E / 51.281°N 1.074°E / 51.281; 1.074 (Cock Mill, Canterbury)

The River Stour bifurcates through Canterbury, the western stream powered two watermills and the eastern stream powered eight.

Cock Mill was a small mill with a single waterwheel. It was demolished in the 19th century. [23]

Dean's (Westgate, Shafford's, Hooker's) Mill, Canterbury

TR 148 583 51°16′59″N1°04′44″E / 51.283°N 1.079°E / 51.283; 1.079 (Dean's (Westgate, Shafford's, Hooker's) Mill, Canterbury)

This was a corn mill. The mill was rebuilt circa 1790 and had two internal waterwheels driving eight pairs of stones. The mill was bought by William Hooker in the 1890s and was renamed Westgate mill. The mill burnt down in June 1954. [24]

Barton Mill, Canterbury

TR 156 588 51°17′17″N1°05′28″E / 51.288°N 1.091°E / 51.288; 1.091 (Barton Mill, Canterbury)

The following mills are those on the eastern stream of the River Stour in Canterbury.

This was the last watermill in Canterbury that was working for trade. For many years it was a paper mill, and then a corn mill. There were two waterwheels driving the millstones, and probably another waterwheel which drove other machinery. The millstones were latterly replaced by roller mills. There was a fire in 1951, after which the mill was modernised, and another fire in July 2004 meant the end of milling at Barton mill. Some of the buildings survive, converted to residential use. [25]

St. Mildred's Mill, Canterbury

This corn mill stood within the city walls, and disappeared in mediaeval times. [26]

St. Mildred's Tannery, Canterbury

The tannery in Canterbury occupies a very old site, even older than the cathedral. The current firm was established in 1878 by Joseph and Samuel Conolly. Leather from the tannery was of the highest quality, and has been used in the coronation coach of King Edward VII, Rolls-Royces, Concorde, the QE2, Ferraris, and the Houses of Parliament. [27] The tannery buildings are now converted to residential use.

Mead Mill, Canterbury

Little is known of this mill, which disappeared centuries ago. [28]

King's Mill, Canterbury

TR 148 580 51°16′52″N1°04′44″E / 51.281°N 1.079°E / 51.281; 1.079 (King's Mill, Canterbury)

This corn mill stood on an ancient mill site. The mill was granted to St Augustine's Abbey by King Stephen in 1144. In 1174 it was repossessed by the Crown, and granted to Rohesia, the sister of Thomas Becket. The mill stood opposite The Weavers House, and marks in the brickwork show where the waterwheel was. [29]

Queen's Mill, Canterbury

Abbott's (City, Denne's) Mill, Canterbury

The remains of the mill Abbott's Mill, Canterbury.JPG
The remains of the mill

TR 148 582 51°16′55″N1°04′44″E / 51.282°N 1.079°E / 51.282; 1.079 (Abbott's (City, Denne's) Mill, Canterbury)

This corn mill stood on the site of a medieval mill owned by the Abbot. The building dated from 1792 and was originally designed as a granary by John Smeaton. In 1794 it was converted into a watermill by Joseph Royle and James Simmons. [30] The building was 60 feet (18.29 m) square in plan, and six storeys tall. The base was brick and the upper five storeys were wood, clad in white painted weatherboarding. At the time it was built, it was the second tallest building in Canterbury, after the Cathedral. There were two waterwheels each 12 feet (3.66 m) diameter and 6 feet (1.83 m) diameter driving a total of eight pairs of stones. [31] In 1896 it was bought by Denne's. The mill was destroyed by fire on 17 October 1933. [32] The cast-iron axle survives on site. [33]

Black Mill, Sturry

The Black Mill, c1920 Sturry Black 1920.jpg
The Black Mill, c1920

Sturry had two watermills, neither of which survive today.

White Mill, Sturry

TR 175 600 51°17′53″N1°07′05″E / 51.298°N 1.118°E / 51.298; 1.118 (White Mill, Sturry)

This corn mill has been demolished, with only scant remains of the machinery remaining. There is a turbine of some 4 feet (1.22 m) diameter, and a low breast shot waterwheel 14 feet 10 inches (4.52 m) diameter and 7 feet 2 inches (2.18 m) wide. [34]

Tributaries of Great Stour

Kennington Mills

TR 032 454 51°10′19″N0°54′18″E / 51.172°N 0.905°E / 51.172; 0.905 (Kennington Mills)

The mills at Kennington were powered by wind, steam and water. The windmill was built in 1813 by Messrs. Hill, the Ashford millwrights. The millers in 1886 were Messrs. Pledge, who had several mills in the Ashford area. In 1892 Charles Stanley took the mills. The sails from the windmill were taken to Pluckley windmill when Kennington mills closed. The windmill was an empty shell by the 1930s [35] and was demolished in 1952. [36] The windmill was connected by a footbridge to the watermill building and the steam mill building was attached to the windmill base, which survives today. The watermill was powered by the Kennington Stream.

Little Stour

The Little Stour powered four watermills.

Littlebourne (Hovis, Jarvis, White) Mill

Littlebourne mill Littlebourne Mill.jpg
Littlebourne mill

TR 214 581 51°16′44″N1°10′23″E / 51.279°N 1.173°E / 51.279; 1.173 (Littlebourne Mill)

Littlebourne mill was a corn mill with a breastshot waterwheel. The building survives, converted to residential use. [37] The mill was standing in 1803, when it was leased to William White. In 1820, a 12-foot-6-inch-diameter (3.81 m) by 5-foot-7-inch-wide (1.70 m) waterwheel was installed for Mr Kingsford, replacing a smaller waterwheel. The mill was being run by William Halliday in 1851. In 1894, Messrs Holman Bros, millwrights of Canterbury, quoted £45.10.0 for a new iron waterwheel and pit wheel, or £36.0.0 for a new wooden one. The mill was owned by Mr Jarvis in 1944, in which year it was sold to Vitovis Ltd. In 1945, the mill was modernised by the fitting of roller milling machinery and converting the whole to be powered by electricity. A large sign on the mill advertised Hovis flour. The mill was later sold to Gardener & Sons of Birchington but had closed by 1957. The mill was house-converted in the early 1960s, with all machinery being removed. [38]

Ickham Mill

TR 214 580 51°16′41″N1°10′23″E / 51.278°N 1.173°E / 51.278; 1.173 (Ickham Mill)

Ickham mill was a corn mill. The building survives, converted to residential use.

Wickhambreaux Mill

Wickhambreaux Mill Wickhambreaux mill.jpg
Wickhambreaux Mill

TR 220 556 51°15′22″N1°10′48″E / 51.256°N 1.180°E / 51.256; 1.180 (Wickhambreaux Mill)

Wickhambreaux mill was a large corn mill, with a brick base and four storeys clad in weatherboarding. The mill has been converted into flats, and retains its breast shot waterwheel.

Seaton Mill, Wickhambreaux

TR 226 586 51°16′59″N1°11′28″E / 51.283°N 1.191°E / 51.283; 1.191 (Seaton Mill, Wickhambreaux)

Seaton mill was a large mill, with tarred weatherboarding. It had a breastshot waterwheel and a steam engine. The building survives, converted to residential use. [39]

Related Research Articles

<span class="mw-page-title-main">River Cray</span> River

The River Cray is the largest tributary of the River Darent. It is the prime river of outer, south-east Greater London, rising in Priory Gardens, Orpington, where rainwater percolates through the chalk bedrock of the Downs to form a pond where the eroded ground elevation gives way to impermeable clay. Initially it flows true to form northwards, past industrial and residential St Mary Cray, through St Paul's Cray and through Foots Cray, where it enters the parkland Foots Cray Meadows, flowing under by Five Arches bridge. It then flows by restored Loring Hall (c.1760), home of the Lord Castlereagh who killed himself there in 1822. It continues through North Cray and Bexley. It neighbours a restored Gothic (architecture) cold plunge bath house, built around 1766 as part of Vale Mascal Estate. It is then joined by the River Shuttle and then continues through the parkland of Hall Place, which was built for John Champneys in 1540. The Cray turns eastward through Crayford and Barnes Cray to join the Darent in Dartford Creek. The Creek is a well-watered partly tidal inlet between Crayford Marshes and Dartford Marshes by a slight projection of land, Crayford Ness. The villages through which the Cray flows are collectively known as "The Crays".

<span class="mw-page-title-main">River Eden, Kent</span> River in Surrey and Kent, England

The River Eden is a tributary of the River Medway in south east England. It rises at the foot of the North Downs escarpment near Titsey in Surrey and runs initially southwards through Oxted before turning eastwards to enter Kent. After flowing through Edenbridge and passing Hever Castle, the Eden meets the Medway at Penshurst.

<span class="mw-page-title-main">River Darent</span> River in Kent, England

The Darent is a Kentish tributary of the River Thames and takes the waters of the River Cray as a tributary in the tidal portion of the Darent near Crayford. 'Darenth' is frequently found as the spelling of the river's name in older books and maps, Bartholomew's Canals and River of England being one example. Bartholomew's Gazetteer (1954) demonstrates that Darent means "clear water", a result of it springing from and running through chalk. The purity of the water was a major factor in the development of paper and pharmaceuticals in the area.

<span class="mw-page-title-main">Hundred of Ruxley</span> Historical Hundred of Kent, England

Ruxley was an ancient hundred, a land division in the north west of the county of Kent, England. Its area has been mostly absorbed by the growth of London; with its name currently referring to the Ruxley district. Its former area now corresponds to a majority of the London Borough of Bromley, a large part of the London Borough of Bexley and a small part of the Kent District of Sevenoaks. The hundred was within the Lathe of Sutton-at-Hone, in the west division of Kent.

<span class="mw-page-title-main">River Bourne, Kent</span> River in Kent, England

The River Bourne rises in the parish of Ightham, Kent and flows in a generally south easterly direction through the parishes of Borough Green, Platt, Plaxtol, West Peckham, Hadlow, and East Peckham where it joins the River Medway. In the 18th century the river was known as the Busty or Buster, the Shode or Sheet, but is not known by these names nowadays. A bourne is a type of stream, while shode means a branch of a river.

<span class="mw-page-title-main">Loose Stream</span> Stream in Kent, England

The Loose Stream sometimes called the River Loose or Langley Stream is a tributary of the River Medway notable for the number of watermills that it powered in its short length. It rises in Langley, flows through Boughton Monchelsea, Loose and enters the Medway at Tovil. The river valley is deep sided, and there is much evidence of the paper and wool trades which once flourished here: the stream has been dammed in many places, resulting in many mill ponds.

<span class="mw-page-title-main">River Len</span> River in Kent, England

The River Len is a river in Kent, England. It rises at a spring in Bluebell Woods to the southeast of the village centre of Lenham 0.6 miles (0.97 km) from the source of the River Great Stour; both rise on the Greensand Ridge. Its length is c10 miles (16 km). It enters the River Medway at Maidstone.

<span class="mw-page-title-main">Wateringbury Stream</span> River

The Wateringbury stream is a tributary of the River Medway in Kent, England. It rises at Swanton, West Peckham parish, flows south east towards Mereworth and then flows in a generally easterly direction to join the River Medway at Wateringbury. It is some four miles (6 km) long and powered a number of watermills.

<span class="mw-page-title-main">River Teise</span> River

The River Teise is a tributary of the River Medway in Kent, England.

<span class="mw-page-title-main">River Beult</span> River in Kent, England

The River Beult is a tributary of the River Medway in South East England.

<span class="mw-page-title-main">East Malling Stream</span> River in Kent, England

The East Malling Stream, known locally as "The Stream", rises at Well Street, East Malling, Kent, and flows in a generally easterly direction to join the River Medway at Mill Hall, Aylesford. It powered six watermills. The stream may have formerly been known as the Bradbourne, Bradbourne Lane in Ditton bearing witness to this name.

<span class="mw-page-title-main">River Bewl</span> River in Sussex and Kent, England

The River Bewl is a tributary of the River Teise in Kent, England. Its headwaters are in the High Weald, in Sussex between Lamberhurst, Wadhurst and Flimwell. The valley is deeply incised into Tunbridge Wells red sandstone, with a base of alluvium on Wadhurst clay.

<span class="mw-page-title-main">Glossary of mill machinery</span>

This glossary of mill machinery covers the major pieces of machinery to be found in windmills, watermills and horse mills. It does not cover machinery found in modern factories.

The Medway and its tributaries and sub-tributaries have been used for over 1,150 years as a source of power. There are over two hundred sites where the use of water power is known. These uses included corn milling, fulling, paper making, iron smelting, pumping water, making gunpowder, vegetable oil extraction, and electricity generation. Today, there is just one watermill working for trade. Those that remain have mostly been converted. Such conversions include a garage, dwellings, restaurants, museums and a wedding venue. Some watermills are mere derelict shells, lower walls or lesser remains. Of the majority, there is nothing to be seen.

<span class="mw-page-title-main">Union Mill, Cranbrook</span> Grade I listed smock mill in Cranbrook, Kent, England

Union Mill is a Grade I listed smock mill in Cranbrook, Kent, England, which has been restored to working order. It is the tallest smock mill in the United Kingdom.

The Medway and its tributaries and sub-tributaries have been used for over 1,150 years as a source of power. There are over two hundred sites where the use of water power is known. These uses included corn milling, fulling, paper making, iron smelting, pumping water, making gunpowder, vegetable oil extraction, and electricity generation. Today, there is just one watermill working for trade. Those that remain have mostly been converted. Such conversions include a garage, dwellings, restaurants, museums and a wedding venue. Some watermills are mere derelict shells, lower walls or lesser remains. Of the majority, there is nothing to be seen. A large number of tributaries feed into the River Medway. The tributaries that powered watermills will be described in the order that they feed in. The mills are described in order from source to mouth. Left bank and right bank are referred to as though the reader is facing downstream. This article covers the tributaries that feed in above Penshurst.

The Medway and its tributaries and sub-tributaries have been used for over 1,150 years as a source of power. There are over two hundred sites where the use of water power is known. These uses included corn milling, fulling, paper making, iron smelting, pumping water, making gunpowder, vegetable oil extraction, and electricity generation. Today, there is just one watermill working for trade. Those that remain have mostly been converted. Such conversions include a garage, dwellings, restaurants, museums and a wedding venue. Some watermills are mere derelict shells, lower walls or lesser remains. Of the majority, there is nothing to be seen. A large number of tributaries feed into the River Medway. The tributaries that powered watermills will be described in the order that they feed in. The mills are described in order from source to mouth. Left bank and right bank are referred to as though the reader is facing downstream. This article covers the watermills on the tributaries that feed in below Penshurst and above Yalding.

The River Medway and its tributaries and sub-tributaries have been used for more than 1,150 years as a source of power. There are over two hundred sites where the use of water power is known. Many different processes were performed by the use of water power:- corn milling, fulling, paper making, iron smelting, pumping water, making gunpowder, vegetable-oil extraction, and electricity generation. Today, there is just one watermill working for trade. Those that remain have mostly been converted. Such conversions include a garage, dwellings, restaurants, museums and a wedding venue. Some watermills are mere derelict shells, lower walls or lesser remains. Of the majority, there is nothing to be seen. A large number of tributaries feed into the River Medway. The tributaries that powered watermills will be described in the order that they feed in. The mills are described in order from source to mouth. Left bank and right bank are referred to as though the reader is facing downstream. This article deals with the watermills on the tributaries that feed in below Yalding.

<span class="mw-page-title-main">Shiremark Mill, Capel</span> Windmill in Surrey, England

Shiremark Mill, also known as Kingsfold Mill or Capel Mill was a listed Smock mill at Capel, Surrey, England, which was burnt down in 1972.

<span class="mw-page-title-main">South Ockendon Windmill</span>

South Ockendon Windmill was a Smock mill at South Ockendon, Essex, England which collapsed on 2 November 1977.

References

  1. ↑ Spain (1986), p21-22
  2. ↑ Spain (1986), p23-24
  3. ↑ "Bowley Mill". The Mills Archive. Retrieved 1 April 2008.
  4. ↑ "Bowley Mill". The Mills Archive/East Kent Mills Group. Retrieved 1 April 2008.
  5. ↑ Spain (1986), p27-33
  6. ↑ "Descendants of John TANTON & his wife Jane". Trish Dixon. Retrieved 1 April 2008.
  7. 1 2 "Directory of Kent Mill People". The Mills Archive Trust. Archived from the original on 16 April 2009. Retrieved 14 April 2008.
  8. ↑ Spain (1986), p59-61
  9. ↑ Possibly at Field windmill
  10. 1 2 3 "The C.P.Davies Collection of Mill Memorabilia Kent". TEMPLEMAN LIBRARY. Retrieved 1 April 2008.
  11. ↑ "The Monumental Inscriptions In the Church and Churchyard of Little Chart, Kent". Kent Archaeological Society. Retrieved 1 April 2008.
  12. 1 2 "The Paper Mill". Little Chart Parish Council. Archived from the original on 2 October 2011. Retrieved 1 April 2008.
  13. ↑ Historic England (14 February 1967). "Worten Mill and Worten Mill House (Grade II) (1362649)". National Heritage List for England .
  14. ↑ Churchill, Penny. "An 18th century watermill that was home to the man who made millions from Reader's Digest". Country Life. Retrieved 25 February 2023.
  15. ↑ Spain (1986), p77-81
  16. ↑ Francis Frith's Windmills and Watermills, p96
  17. ↑ Spain (1986), p120-28
  18. ↑ TIMS p97
  19. ↑ Spain (1986), p44-52
  20. ↑ Francis Frith's Windmills and Watermills, p69
  21. ↑ Spain (1986), p35-37
  22. ↑ "Chartham Paper Mills". Geograph. Retrieved 2 April 2008.
  23. ↑ "Canterbury, Cock Mill". The Mills Archive. Retrieved 2 April 2008.
  24. ↑ "Canterbury, Dean's Mill, Cereal Milling". The Mills Archive. Retrieved 2 April 2008.
  25. ↑ "Canterbury, Barton Mill, Cereal Milling". The Mills Archive. Retrieved 2 April 2008.
  26. ↑ "Canterbury, St. Mildred's Mill, Cereal Milling". The Mills Archive. Retrieved 2 April 2008.
  27. ↑ "Leather Makers to the Queen (and Ferrari and Jaguar Too)". International Herald Tribune. Archived from the original on 19 October 2008. Retrieved 2 April 2008.
  28. ↑ "Canterbury, Mead Mill". The Mills Archive. Retrieved 2 April 2008.
  29. ↑ "Canterbury, King's Mill, Cereal Milling". The Mills Archive. Retrieved 2 April 2008.
  30. ↑ "Souvenir leaflet of 50th anniversary". The Mills Archive. Retrieved 2 April 2008.
  31. ↑ "The Canterbury Miller's Tale". The Mills Archive. Retrieved 2 April 2008.
  32. ↑ "Canterbury, Abbot's Mill, Cereal Milling". The Mills Archive. Retrieved 2 April 2008.
  33. ↑ Water and Wind Power p72
  34. ↑ Spain (1986), p134-38
  35. ↑ Watermills and Windmills, p228-29
  36. ↑ The Windmills of Kent, p99
  37. ↑ Francis Frith's Windmills and Watermills p86
  38. ↑ Holman, Geoff (2010). "Littlebourne Watermill". Cant Post (2). Kent: Kent Mills Society: 29–30.
  39. ↑ Francis Frith's Windmills and Watermills p82

Sources

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.