Tatra T 810 | |
---|---|
Overview | |
Manufacturer | Tatra |
Production | 2008-present |
Assembly | Kopřivnice, Moravia, Czech Republic |
Body and chassis | |
Class | Medium truck |
Body style | COE |
Powertrain | |
Engine | Diesel
|
Transmission | ZF 6 manual 6 speed + auxiliary gearbox Steyr VG750/270 |
Dimensions | |
Wheelbase | 3,150 mm (124.0 in) + 1,200 mm (47.2 in) 3,540 mm (139.4 in) + 1,200 mm (47.2 in) |
Length | 7,420 mm (292.1 in) |
Width | 2,550 mm (100.4 in) |
Height | 3,065 mm (120.7 in) |
Curb weight | 7,000 kg (15,000 lb) empty 15,500 kg (34,200 lb) loaded |
Chronology | |
Predecessor | Praga V3S |
Renault DXi7 | |
---|---|
Overview | |
Manufacturer | Renault |
Layout | |
Configuration | Straight six |
Displacement | 7,145 cc |
Cylinder bore | 108 mm (4.3 in) |
Piston stroke | 130 mm (5.1 in) |
Compression ratio | 18:1 |
Combustion | |
Fuel type | Diesel fuel |
Cooling system | Water cooled |
Output | |
Power output | 177 kW (237 hp) @ 2000 rpm |
Torque output | 920 N⋅m (679 ft⋅lbf) @ 1300 rpm |
Dimensions | |
Dry weight | 645 kg (1,422 lb) |
The Tatra T 810 (Tactic) is a medium truck made by Czech company Tatra; it replaced the popular Praga V3S which was introduced in the 1950s and served in the Army of the Czech Republic until 2008. Unlike other Tatra trucks, it does not use classic Tatra air-cooled engine and the traditional Tatra conception of backbone chassis and swinging half-axles, but the customary truck architecture with conventional frame. It is mainly intended for difficult terrain conditions. The civilian version T 810-C was introduced in 2010.
In early 1990s the Czech Army was aiming to replace its aging fleet of medium trucks, which was represented by the Praga V3S model introduced into production as early as in 1953. The selection procedure was won the Roudnické slévárny a strojírny (Foundries And Machine-Works of Roudnice) with its ROSS R210 project. The R210 was outsourcing many components from Renault. Since 1996 the company delivered 15 vehicles for the testing purposes, after which the delivery of serial vehicles was supposed to start, however in 1998 the Czech Army canceled the contract. The company has invested a lot into the development of the truck and subsequently it bankrupted. [1] [2]
In 2002 the Tatra company bought the documentation and rights to the R210 truck in order to enter the market of medium trucks (from 3,5 tons to 12 tons), as all the models the company offered were in the class of heavy trucks. It intended to modernize the original project, and it also hoped that the Czech Army will finally undertake the replacement of its fleet of 4000 Praga V3s (while Tatra was supplying the Army with heavy trucks since World War I). Tatra created alliance with other companies to work on the project together; for example the Praga was supposed to deliver gear boxes and portal axle. Other components were to be delivered by Renault (engine, cab). [3]
In 2005 the Czech government approved acquisition of the T810 trucks in August 2005, while deliveries were scheduled to start in April 2008. [4]
The civilian version T 810-C was introduced in 2010, with Tatra claiming it is the only truck with maximum weight of 15,5 tons that has three driven axles, which together with its portal architecture is supposed to give it advantage over the competition in terrain. [5]
In 2017, Tatra 810 4×4 has created the world record, the vehicle crossed the highest artificially created obstacle by the truck, artificial barrier called Brut Monster is one of the most extreme artificial barriers of its kind. Tatra has managed to climb and descent 146%, respectively to surpass inclination of 55°, of 7.5-meter-high obstacle. [6] [7]
The Czech Armed Forces, also known as the Czech Army, is the military service responsible for the defence of the Czech Republic as part of the Armed Forces of the Czech Republic alongside the Military Office of the President of the Republic and the Castle Guard. The army consists of the General Staff, the Land Forces, the Air Force and support units.
Tatra is a Czech vehicle manufacturer from Kopřivnice. It is owned by the TATRA TRUCKS a.s. company, and it is the third oldest company in the world producing motor vehicles with an unbroken history. The company was founded in 1850 as Ignatz Schustala & Cie. In 1890 the company became a joint-stock company and was renamed the Nesselsdorfer Wagenbau-Fabriksgesellschaft. In 1897, the Nesselsdorfer Wagenbau-Fabriksgesellschaft produced the Präsident, which was the first factory-produced automobile with a petrol engine to be made in Central and Eastern Europe. In 1918, the company was renamed Kopřivnická vozovka a.s., and in 1919 it changed from the Nesselsdorfer marque to the Tatra badge, named after the nearby Tatra Mountains on the Czechoslovak-Polish border.
Mack Trucks, Inc. is an American truck manufacturing company and a former manufacturer of buses and trolley buses. Founded in 1900 as the Mack Brothers Company, it manufactured its first truck in 1905 and adopted its present name in 1922. Mack Trucks is a subsidiary of AB Volvo, which purchased Mack along with its then parent company Renault Véhicules Industriels in 2000.
The Tatra 815 is a truck family, produced by Czech company Tatra. It uses the traditional Tatra concept of rigid backbone tube and swinging half-axles giving independent suspension. The vehicles are available in 4x4, 6x6, 8x8, 10x8, 10x10, 12x8 and 12x12 variants. There are both air-cooled and liquid-cooled engines available with power ranging from 230–440 kilowatts (310–590 hp). As a successor to Tatra 813 it was originally designed for extreme off-road conditions, while nowadays there are also variants designated for mixed use. The gross weight is up to 35,500 kg (78,264 lb).
A portal axle is an off-road vehicle suspension and drive technology where the axle tube or the half-shaft is offset from – usually above – the center of the wheel hub and where driving power is transferred to each wheel via a simple gearbox, built onto each hub. It gives two advantages: ground clearance is increased, particularly beneath the low-slung differential housing of the main axles — and secondly, any hub reduction gearing allows the axle half shafts to drive the same power but at reduced torque. This reduces load on the axle crown wheel and differential.
Avia Motors s.r.o. is a Czech automotive manufacturer. Founded in 1919 as an aircraft maker, it diversified into trucks after 1945. As an aircraft maker it was notable for producing biplane fighter aircraft, especially the B-534. Avia ceased aircraft production in 1963.
Six-wheel drive is an all-wheel drive drivetrain configuration of three axles with at least two wheels on each axle capable of being driven simultaneously by the vehicle's engine. Unlike four-wheel drive drivetrains, the configuration is largely confined to heavy-duty off-road and military vehicles, such as all-terrain vehicles, armored vehicles, and prime movers.
BEML Limited, formerly Bharat Earth Movers Limited, is an Indian public sector undertaking which manufactures a variety of heavy equipment, such as that used for earth moving, railways, transport and mining. It is headquartered in Bangalore. BEML is Asia's second-largest manufacturer of earth moving equipment. Its stock trades on the National Stock Exchange of India under the symbol "BEML", and on the Bombay Stock Exchange under the code "500048".
The RM-70 multiple rocket launcher is a Czechoslovak Army version and heavier variant of the BM-21 Grad multiple rocket launcher, providing enhanced performance over its parent area-saturation rocket artillery system that was introduced in 1971.
Praga is a manufacturing company based in Prague, Czech Republic. The company produced automobiles, trucks and planes. The Praga V3S 5-ton truck was used by the Czechoslovak Army for more than half a century. The current company produces karts, racing and road supersports and is involved in car racing. It produces up to 7,000 kart chassis every year, making it one of the most successful kart manufacturers in the world.
The Tatra 111 was a truck produced in Czechoslovakia by the Tatra company.
Military Technical Museum Lešany is a museum of military vehicles located in Lešany in the Central Bohemian Region of the Czech Republic. It is part of the Military History Institute Prague together with Kbely Aviation Museum and Army Museum Žižkov. Its exposition contains over 700 historic tanks, cannons, motorcycles, armored vehicles, trucks, military passenger vehicles, missile systems and other military equipment manufactured from 1890 to the present. The museum is open from June to September on weekends and in July and August all days except mondays and is free of charge.
The Tatra T 163 Jamal is a heavy truck made by the Czech company Tatra. It uses the traditional Tatra concept of a rigid backbone tube and swinging half-axles giving independent suspension. The vehicles are available primarily in 6x6 and alternatively also 4x4 variants. It is marketed either as a road-legal heavy truck or as a working machine. The T163 is a continuation of the tradition started with the Tatra T 111, which played a crucial role in the effort to rebuild Central and Eastern Europe after the Second World War as well as in conquering the Russian Far East.
The Tatra T816 is a truck family, produced by Czech company Tatra. It uses the traditional tatra concept of rigid backbone tube and swinging half-axles giving independent suspension. The vehicles are available in 4x4, 6x6, 8x8, 10x8, 10x10, 12x8 and 12x12 variants. The truck was developed from the model T815 to comply with the most demanding off-road conditions. Originally the T816 range was developed for the purposes of military, however today also civilian applications are available (notably as heavy off-road firefighting trucks.
The Praga V3S is an all-terrain multi-purpose truck, produced between 1953 and 1990 in Czechoslovakia. It was designed for the armed forces and was also exported to 72 countries. Praga produced the truck until 1964, then the Avia company till around 1986, after which the Bratislava company BAZ rolled out these vehicles till 1990. Around 130,000 units were manufactured. The truck was among the best off-road cargo vehicles of its time and the Czechoslovak Army used it for more than half a century. It was the longest produced Czechoslovak truck and it still serves in Czech Army for more than 70 years, despite being slowly replaced by Tatra 810 and Tatra 815.
The Tatra 92 was an army off-road truck model made by Czech manufacturer Tatra between 1937 and 1941. It was mainly used for transporting military cargo and personnel in Czech and later German armies, but also ambulance and field kitchen lorry versions were made. The significant part of the production batch was exported to Kingdom of Romania.
The Praga RV was an army off-road truck model made by Czech manufacturer Praga between 1935 and 1939. It was mainly used for transporting military cargo, personnel, as ambulance and for towing artillery pieces in Czech and later German and Romanian armies. 3290 vehicles were slated for use in Czechoslovakia while the rest was exported to Iran, Peru, Poland, Sweden, Switzerland and Turkey.
The Tatra 815-7 is a heavy army logistics vehicle made by the Czech company Tatra produced since 2007. T817 is primarily intended for military operators and for specialist roles in civilian sector. The truck is made primarily with axle variations of 4×4, 6×6, 8×8 and 10×10. Other chassis variants up to 16x16 are also available.
The Czechoslovak Group (CSG), formerly Excalibur Group, is a Czech industrial-technological holding company encompassing over 100 companies with over 10,000 employees worldwide. Headquartered in Prague, CSG operates in several sectors including defense, aerospace, ammunition, automotive, and railway industries. Since January 2018, the owner of the Czechoslovak Group is Michal Strnad, the son of the founder, Jaroslav Strnad.