Ternary compound

Last updated

In inorganic chemistry and materials chemistry, a ternary compound or ternary phase is a chemical compound containing three different elements.

Contents

While some ternary compounds are molecular, e.g. chloroform (HCCl3), more typically ternary phases refer to extended solids. Famous example are the perovskites. [1]

Binary phases, with only two elements, have lower degrees of complexity than ternary phases. With four elements, quaternary phases are more complex.

The number of isomers of a ternary compound provide a distinction between inorganic and organic chemistry: "In inorganic chemistry one or, at most, only a few compounds composed of any two or three elements were known, whereas in organic chemistry the situation was very different." [2]

Ternary crystalline compounds

Sodium phosphate,
Na3PO4, is a ternary compound. Trisodium phosphate.png
Sodium phosphate, Na3PO4, is a ternary compound.

An example is sodium phosphate, Na3PO4. The sodium ion has a charge of 1+ and the phosphate ion has a charge of 3–. Therefore, three sodium ions are needed to balance the charge of one phosphate ion. Another example of a ternary compound is calcium carbonate, CaCO3. In naming and writing the formulae for ternary compounds, rules are similar to binary compounds.

Classifications of ternary crystals

According to Rustum Roy and Olaf Müller, [3] "the chemistry of the entire mineral world informs us that chemical complexity can easily be accommodated within structural simplicity." The example of zircon is cited, where various metal atoms are replaced in the same crystal structure. "The structural entity ... remains ternary in character and is able to accommodate an enormous range of chemical elements." The great variety of ternary compounds is therefore reduced to relatively few structures: "By dealing with approximately ten ternary structural groupings we can cover the most important structures of science and technology specific to the non-metallics world. It is a remarkable instance of nature's simplexity." [3] :3,4

Lithium niobate is a famous ternary phase. It features three elements: Li, Nb, and O. Linbo3 Unit Cell.png
Lithium niobate is a famous ternary phase. It features three elements: Li, Nb, and O.

Letting A and B represent cations and X an anion, these ternary groupings are organized by stoichiometric types A2BX4, ABX4, and ABX3.

A ternary compound of type A2BX4 may be in the class of olivine, the spinel group, or phenakite. Examples include K2NiF4, β-K2SO4, and CaFe2O4.

One of type ABX4 may be of the class of zircon, scheelite, barite or an ordered silicon dioxide derivative.

In the ABX3 class of ternary compounds, there are the structures of perovskite (structure), calcium carbonate, pyroxenes, corundum and hexagonal ABX2 types. [3] :figure 1,page 3

Other ternary compounds are described as crystals of types ABX2, A2B2X7, ABX5, A2BX6, and A3BX5.

Ternary semiconductors

A particular class of ternary compounds are the ternary semiconductors, particularly within the III-V semiconductor family. In this type of semiconductor, the ternary can be considered to be an alloy of the two binary endpoints. Varying the composition between the endpoints allows both the lattice constant and the energy bandgap to be adjusted to produce the properties desired, for example, in emitting light (for example, as a LED) or absorbing light (as a photodetector or a photovoltaic cell). An example would be the semiconductor indium gallium arsenide (InxGa1−xAs), a material with band gap dependent on In/Ga ratio.

Important examples of ternary semiconductors can also be found in other semiconductor families, such as the II-VI family (e.g., Mercury cadmium telluride, Hg1−xCdxTe), or the I-II-VI2 family, with examples such as CuInSe2.

Organics

In organic chemistry, the carbohydrates and carboxylic acids are ternary compounds with carbon, oxygen, and hydrogen. Other organic ternary compounds replace oxygen with another atom to form functional groups.

The multiplicity of ternary compounds based on {C, H, O} has been noted. For example, corresponds to more than 60 ternary compounds. [4] [2]

See also

Related Research Articles

A chemical formula is a way of presenting information about the chemical proportions of atoms that constitute a particular chemical compound or molecule, using chemical element symbols, numbers, and sometimes also other symbols, such as parentheses, dashes, brackets, commas and plus (+) and minus (−) signs. These are limited to a single typographic line of symbols, which may include subscripts and superscripts. A chemical formula is not a chemical name since it does not contain any words. Although a chemical formula may imply certain simple chemical structures, it is not the same as a full chemical structural formula. Chemical formulae can fully specify the structure of only the simplest of molecules and chemical substances, and are generally more limited in power than chemical names and structural formulae.

<span class="mw-page-title-main">Hydroxide</span> Chemical compound

Hydroxide is a diatomic anion with chemical formula OH. It consists of an oxygen and hydrogen atom held together by a single covalent bond, and carries a negative electric charge. It is an important but usually minor constituent of water. It functions as a base, a ligand, a nucleophile, and a catalyst. The hydroxide ion forms salts, some of which dissociate in aqueous solution, liberating solvated hydroxide ions. Sodium hydroxide is a multi-million-ton per annum commodity chemical. The corresponding electrically neutral compound HO is the hydroxyl radical. The corresponding covalently bound group –OH of atoms is the hydroxy group. Both the hydroxide ion and hydroxy group are nucleophiles and can act as catalysts in organic chemistry.

<span class="mw-page-title-main">Inorganic chemistry</span> Field of chemistry

Inorganic chemistry deals with synthesis and behavior of inorganic and organometallic compounds. This field covers chemical compounds that are not carbon-based, which are the subjects of organic chemistry. The distinction between the two disciplines is far from absolute, as there is much overlap in the subdiscipline of organometallic chemistry. It has applications in every aspect of the chemical industry, including catalysis, materials science, pigments, surfactants, coatings, medications, fuels, and agriculture.

<span class="mw-page-title-main">Salt (chemistry)</span> Chemical compound involving ionic bonding

In chemistry, a salt or ionic compound is a chemical compound consisting of an assembly of positively charged ions (cations) and negatively charged ions (anions), which results in a compound with no net electric charge. The constituent ions are held together by electrostatic forces termed ionic bonds.

<span class="mw-page-title-main">Hydride</span> Molecule with a hydrogen bound to a more electropositive element or group

In chemistry, a hydride is formally the anion of hydrogen (H), a hydrogen atom with two electrons. The term is applied loosely. At one extreme, all compounds containing covalently bound H atoms are also called hydrides: water (H2O) is a hydride of oxygen, ammonia is a hydride of nitrogen, etc. For inorganic chemists, hydrides refer to compounds and ions in which hydrogen is covalently attached to a less electronegative element. In such cases, the H centre has nucleophilic character, which contrasts with the protic character of acids. The hydride anion is very rarely observed.

<span class="mw-page-title-main">Perovskite (structure)</span> Type of crystal structure

A perovskite is any material with a crystal structure following the formula ABX3, which was first discovered as the mineral called perovskite, which consists of calcium titanium oxide (CaTiO3). The mineral was first discovered in the Ural mountains of Russia by Gustav Rose in 1839 and named after Russian mineralogist L. A. Perovski (1792–1856). 'A' and 'B' are two positively charged ions (i.e. cations), often of very different sizes, and X is a negatively charged ion (an anion, frequently oxide) that bonds to both cations. The 'A' atoms are generally larger than the 'B' atoms. The ideal cubic structure has the B cation in 6-fold coordination, surrounded by an octahedron of anions, and the A cation in 12-fold cuboctahedral coordination. Additional perovskite forms may exist where either/both the A and B sites have a configuration of A1x-1A2x and/or B1y-1B2y and the X may deviate from the ideal coordination configuration as ions within the A and B sites undergo changes in their oxidation states.

<span class="mw-page-title-main">Potassium hydroxide</span> Inorganic compound (KOH)

Potassium hydroxide is an inorganic compound with the formula KOH, and is commonly called caustic potash.

<span class="mw-page-title-main">Phosphite anion</span> Ion

A phosphite anion or phosphite in inorganic chemistry usually refers to [HPO3]2− but includes [H2PO3] ([HPO2(OH)]). These anions are the conjugate bases of phosphorous acid (H3PO3). The corresponding salts, e.g. sodium phosphite (Na2HPO3) are reducing in character.

<span class="mw-page-title-main">Cyanate</span> Anion with formula OCN and charge –1

The cyanate ion is an anion with the chemical formula OCN. It is a resonance of three forms: [O−C≡N] (61%) ↔ [O=C=N] (30%) ↔ [O+≡C−N2−] (4%).

In chemistry, an arsenide is a compound of arsenic with a less electronegative element or elements. Many metals form binary compounds containing arsenic, and these are called arsenides. They exist with many stoichiometries, and in this respect arsenides are similar to phosphides.

Sodium oxide is a chemical compound with the formula Na2O. It is used in ceramics and glasses. It is a white solid but the compound is rarely encountered. Instead "sodium oxide" is used to describe components of various materials such as glasses and fertilizers which contain oxides that include sodium and other elements. Sodium oxide is a component.

In chemistry, an aluminate is a compound containing an oxyanion of aluminium, such as sodium aluminate. In the naming of inorganic compounds, it is a suffix that indicates a polyatomic anion with a central aluminium atom.

Chemical nomenclature is a set of rules to generate systematic names for chemical compounds. The nomenclature used most frequently worldwide is the one created and developed by the International Union of Pure and Applied Chemistry (IUPAC).

In chemical nomenclature, the IUPAC nomenclature of inorganic chemistry is a systematic method of naming inorganic chemical compounds, as recommended by the International Union of Pure and Applied Chemistry (IUPAC). It is published in Nomenclature of Inorganic Chemistry. Ideally, every inorganic compound should have a name from which an unambiguous formula can be determined. There is also an IUPAC nomenclature of organic chemistry.

<span class="mw-page-title-main">Lithium sulfate</span> Chemical compound

Lithium sulfate is a white inorganic salt with the formula Li2SO4. It is the lithium salt of sulfuric acid.

Sodium atoms have 11 electrons, one more than the stable configuration of the noble gas neon. As a result, sodium usually forms ionic compounds involving the Na+ cation. Sodium is a reactive alkali metal and is much more stable in ionic compounds. It can also form intermetallic compounds and organosodium compounds. Sodium compounds are often soluble in water.

Nomenclature of Inorganic Chemistry, IUPAC Recommendations 2005 is the 2005 version of Nomenclature of Inorganic Chemistry. It is a collection of rules for naming inorganic compounds, as recommended by the International Union of Pure and Applied Chemistry (IUPAC).

<span class="mw-page-title-main">Actinide chemistry</span> Branch of nuclear chemistry

Actinide chemistry is one of the main branches of nuclear chemistry that investigates the processes and molecular systems of the actinides. The actinides derive their name from the group 3 element actinium. The informal chemical symbol An is used in general discussions of actinide chemistry to refer to any actinide. All but one of the actinides are f-block elements, corresponding to the filling of the 5f electron shell; lawrencium, a d-block element, is also generally considered an actinide. In comparison with the lanthanides, also mostly f-block elements, the actinides show much more variable valence. The actinide series encompasses the 15 metallic chemical elements with atomic numbers from 89 to 103, actinium through lawrencium.

Structure field maps (SFMs) or structure maps are visualizations of the relationship between ionic radii and crystal structures for representing classes of materials. The SFM and its extensions has found broad applications in geochemistry, mineralogy, chemical synthesis of materials, and nowadays in materials informatics.

References

  1. Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN   978-0-08-037941-8.
  2. 1 2 Theodor Benfey (1964) From Vital Force to Structural Formulas, page 12, Houghton Mifflin Company
  3. 1 2 3 Rustum Roy & Olaf Müller (1974) The Major Ternary Structural Families, Springer-Verlag ISBN   9780387064307
  4. F. K. Beilstein Handbuch der organischen Chemie, page 58