USRC Mohawk

Last updated

USRC Mohawk.jpg
USRC Mohawk
History
US flag 48 stars.svgUnited States
NameMohawk
NamesakeThe Mohawk tribe [1]
Builder
Commissioned10 May 1904 into United States Revenue Cutter Service
Recommissioned6 April 1917 by United States Navy [1]
Fate
General characteristics [2]
Displacement1,150 long tons (1,168 t)
Length205 ft 6 in (62.64 m)
Beam32 ft 0 in (9.75 m)
Draft12 ft 7 in (3.84 m)
Installed powertriple-expansion steam engine,25 in (0.64 m), 37.5 in (0.95 m), 56.25 in (1.429 m) diameter X 30 in (0.76 m) stroke, single screw [3]
Armament
  • 2 × 6 pounder rapid fire guns (1907)
  • 4 × 6 pounder rapid fire guns (1914) [3]

USRC Mohawk, was a steel steam powered revenue cutter built for the U.S. Revenue Cutter Service by William R. Trigg Company at Richmond, Virginia. Her primary duties in the Revenue Cutter Service and Coast Guard were assisting vessels in distress and enforcing navigational laws as well as a derelict destroyer. Mohawk was sunk after a collision with another vessel in October 1917.

Contents

Construction

Mohawk was steel-hulled cutter constructed by William R. Trigg Company of Richmond, Virginia. [3] [Note 1] She was powered by a triple-expansion steam engine propelling a single screw. She was commissioned into the United States Revenue Cutter Service on 10 May 1904 at Arundel Cove, Curtis Bay, Maryland, with Captain Worth G. Ross commanding. [2] [3] [6]

History

1904–1917

Shortly after commissioning, Mohawk was based at Tompkinsville, New York, where she cruised the Atlantic Ocean and adjacent waters between Nantucket Shoals, Massachusetts, and the Delaware breakwater. Her primary duties were "assisting vessels in distress and enforcing the various navigational laws" including patrolling regattas. She also served as a derelict destroyer. [2] [3] On 1 April 1905, Captain Ross was relieved by Captain Byron L. Reed because Ross had been appointed as Chief of Division, Revenue Cutter Service. [3] In June 1905, she patrolled several regattas in addition to her regular patrol duties. [3] [6] On 30 July, Chief of Division Ross visited Mohawk at Whitestone, New York. [6] On 25 August she responded to orders to assist SS Barnes which was grounded 1.75 mi (2.82 km) from Jones Beach Life-Saving Station. [6]

In June 1906 Mohawk again patrolled several regattas in her patrol area in addition to her regular duties as well as the patrol area of USRC Gresham while she was laid up for repairs. In December she was called to the scenes of several derelicts in her patrol area to destroy them. [7]

On 12 February 1907 Mohawk assisted in helping the survivors of a collision that occurred in her patrol area between SS Larchmont and schooner Knowlton. [7]

On 26 February 1909 Mohawk ran aground in Hell Gate on Hog Back Ledge. She was refloated, repaired and returned to service. [8]

On 6 March 1910, Mohawk assisted by USRC Onondaga towed the abandoned waterlogged four-masted schooner Asbury Fountain to Norfolk, Virginia after she suffered a collision with SS Jamestown. [9]

In April 1912, Mohawk and USRC Acushnet helped rescue the crew from SS Ontario, which was ablaze off Montauk Point, Long Island. [10]

On 26 April 1912, Mohawk was called upon to transport President William H. Taft from New York City's Recreation Pier to Governors Island and back on the occasion of the funeral of Major General Frederick Dent Grant, son of President Ulysses S. Grant. In September, she was tasked with helping Dr. George Styles of the U.S. Department of Agriculture in his study of the bottom of the Potomac River. [3] [11]

On 5 July 1913, Mohawk received Secretary of the Treasury William Gibbs McAdoo aboard for a cruise from her moorings at Tompkinsville. On 6 September she arrived at the RCS Depot at Curtis Bay, Maryland for an overhaul. On 7 October she was placed out of commission and her crew was sent to USRC Itasca. With the overhaul completed, the crew returned from Itasca and Mohawk was re-commissioned 17 April 1914. On 12 June received RCS Captain-Commandant Ellsworth P. Bertholf and party aboard during the annual Harvard–Yale Regatta at New London, Connecticut [12] On 5 August, at the beginning of World War I, Mohawk was assigned to enforce the United States' neutrality laws and was directed to board all foreign vessels leaving port to inspect cargoes and documents. She continued that duty until 19 March 1915 when she returned to her regular patrol areas. [3] When the Revenue Cutter Service merged with the United States Life-Saving Service to form the United States Coast Guard on 28 January 1915, she became known as USCGC Mohawk, a United States Coast Guard cutter. [13] She ran aground on Bartlett Reef ( 41°17′09″N72°08′05″W / 41.2859°N 072.1348°W / 41.2859; -072.1348 (Bartlett Reef) ) in Long Island Sound on 29 May 1916 but was refloated, drydocked, repaired, and returned to service. [14]

U.S. Navy service

Mohawk was temporarily transferred to the United States Navy on 6 April 1917 for service in World War I retaining her Coast Guard crew. [3] [15] She was the fourth ship known by that name commissioned into the Navy. [1] While serving on coastal duty in connection with convoy operations, she was struck in Ambrose Channel by the British tanker SS Vennacher and sank on 1 October 1917 off Sandy Hook, New Jersey. [16] [17] All 77 crew members were rescued by the U.S. Navy patrol vessels USS Mohican and USS Sabalo. [3] [Note 2] The water was deemed too deep to warrant salvage operations so Mohawk was left where she sank. [1] On 7 February 1921, salvage rights were sold to H.L. Gotham Corporation of New York City for US$111.00. [3]

Notes

Footnotes

  1. ↑ Colton mentions the bankruptcy of the Trigg Company in 1903 and the fact that several ships under construction in the yard either were not finished or had to be completed by their owners. Mohawk evidently had to be completed by the Revenue Cutter Service. It is not clear whether this was done under a contract to some third party or the work was completed by service personnel. [4] [5]
  2. ↑ Johnson claims all crew members of Mohawk were picked up by the U.S. Navy storeship USS Bridge and uses the reference "Johnston and Crisp" as his source. Charles E. Johnston and Richard O. Crisp were two Coast Guard captains who authored A History of the Coast Guard in the World War in a four-volume unpublished typescript. [18] [19] The Coast Guard Historian's Office website cites no specific source about USS Mohican and USS Sabalo rescuing crewmen from Mohawk. [3]

Citations

  1. 1 2 3 4 5 "Mohawk", Dictionary of American Naval Fighting Ships, U.S. Navy Naval History and Heritage Command
  2. 1 2 3 4 Canney, pp 60–61
  3. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 "Mohawk, 1904", Cutters, Craft & U.S. Coast Guard-Manned Army & Navy Vessels, U.S. Coast Guard Historian's Office
  4. ↑ Colton, Tim; "William R. Trigg Co., Richmond VA", Shipyard Index, Shipbuilding History
  5. ↑ "Richmonder took risk on shipbuilding business", TMCnet.com, Richmond (Virginia) Times-Dispatch
  6. 1 2 3 4 Record of Movements, p 59
  7. 1 2 Record of Movements, p 60
  8. ↑ "American Marine Engineer January, 1909". National Marine Engineers Beneficial Association of the United States. Retrieved 3 February 2021– via Haithi Trust.
  9. ↑ King, p 143
  10. ↑ Evans, p 214
  11. ↑ Record of Movements, p 61
  12. ↑ Record of Movements, p 62
  13. ↑ "U.S. Coast Guard General Order No. 1", Historic Documents & Publications, U.S. Coast Guard Historian's Office
  14. ↑ R.C. Mohawk, New Jersey Scuba Diving
  15. ↑ Larzelere, p 183
  16. ↑ Record of Movements, p 63
  17. ↑ Johnson, p 47
  18. ↑ Johnson, p 394
  19. ↑ "Register of the officers, vessels and stations of the United States Coast Guard, January 1, 1918", U.S. Government Printing Office, p 79

Related Research Articles

<span class="mw-page-title-main">United States Revenue Cutter Service</span> Precursor to the U.S. Coast Guard

The United States Revenue Cutter Service was established by an act of Congress on 4 August 1790 as the Revenue-Marine upon the recommendation of Secretary of the Treasury Alexander Hamilton to serve as an armed customs enforcement service. As time passed, the service gradually gained missions either voluntarily or by legislation, including those of a military nature. It was generally referred to as the Revenue-Marine until 31 July 1894, when it was officially renamed the Revenue Cutter Service. The Revenue Cutter Service operated under the authority of the U.S. Department of the Treasury. On 28 January 1915, the service was merged by an act of Congress with the United States Life-Saving Service to form the United States Coast Guard.

<span class="mw-page-title-main">Frank H. Newcomb</span> United States Coast Guard commodore (1846–1934)

Frank Hamilton Newcomb was a United States Revenue Cutter Service commodore, best known for his actions at the Battle of Cárdenas during the Spanish–American War.

<span class="mw-page-title-main">Harry G. Hamlet</span> United States Coast Guard Commandant (1874–1954)

Harry Gabriel Hamlet was the seventh Commandant of the United States Coast Guard, from 1932 to 1936.

<span class="mw-page-title-main">William E. Reynolds</span> Commandant of the United States Coast Guard (1860 - 1944)

William Edward Reynolds served as the fifth Commandant of the United States Coast Guard, from 1919 to 1924.

USRC <i>Windom</i> (1896) U.S. ship

USRC Windom was a revenue cutter of the United States Revenue Cutter Service and United States Coast Guard that served from 1896 to 1930. She was named for William Windom, the 33rd and 39th United States Secretary of the Treasury. She served during the Spanish–American War with the United States Navy. Windom was recommissioned as USCGC Comanche in 1915 and again served with the Navy as USS Comanche during World War I.

USS <i>Bancroft</i> (1892) Gunboat of the United States Navy

USS Bancroft was a United States Navy steel gunboat in commission from 1893 to 1898 and again from 1902 to 1905. She saw service during the Spanish–American War. After her U.S. Navy career, she was in commission in the United States Revenue Cutter Service from 1907 to 1915 as the revenue cutter USRC Itasca, and in the Revenue Cutter Service's successor service, the United States Coast Guard, as the cutter USCGC Itasca from 1915 to 1922. During her Coast Guard career, she saw service during World War I.

USRC <i>Hudson</i> (1893)

USRC Hudson, known for her service during the Battle of Cárdenas, was the United States Revenue Cutter Service's first vessel to have a steel hull and triple-expansion steam engine.

USRC Walter Forward was a schooner constructed for service with the United States Revenue Marine. She was more commonly known as USRC Forward. Forward served with the U.S. Army and U.S. Navy in Mexican waters during the Mexican–American War and was commended for her actions during the Tabasco River landings by Commodore Matthew C. Perry, U.S. Navy. After the war, she was transferred to the U.S. Coast Survey for a short time as USCS Walter Forward before being returned to the Revenue Marine for service during the 1850s and the American Civil War.

USCGC <i>Seneca</i> (1908)

USCGC Seneca, or before 1915 USRC Seneca, was a United States Coast Guard cutter built and commissioned as a "derelict destroyer" with the specific mission of locating and then destroying abandoned shipwrecks that were still afloat and were a menace to navigation. She was designed with excellent sea-keeping qualities, a long cruising range, good towing capabilities, and by necessity the capacity to store a large amount of munitions. She was one of five Coast Guard cutters serving with the U.S. Navy in European waters during World War I.

USRC <i>Seminole</i>

USRC Seminole was a 188 ft (57 m), 845-ton United States Revenue Cutter Service steamer constructed by the Columbian Iron Works in Baltimore, Maryland for $141,000. She was commissioned in 1900 and saw service through 1934, when she was transferred to the Federal Emergency Relief Administration.

<span class="mw-page-title-main">Worth G. Ross</span>

Worth G. Ross is known as the third Commandant of the Coast Guard, although he was never formally appointed to that position. Joining the United States Revenue Cutter Service in 1877, he graduated from the Revenue Cutter Service School of Instruction's first class in 1879. He held a variety of appointments during the late 19th century before being appointed Captain-Commandant of the service in 1905. In this capacity he commanded a number of cutters on the United States Gulf Coast and was responsible for moving the School of Instruction to Fort Trumbull, Connecticut. He was a relation of Brevet Brigadier General Samuel Ross (1822-1880), who commanded the 20th Connecticut Infantry during the American Civil War.

USCGC <i>Tampa</i> (1912) US Coast Guard ship

USCGC Tampa (ex-Miami) was a Miami-class cutter that initially served in the U.S. Revenue Cutter Service, followed by service in the U.S. Coast Guard and the U.S. Navy. Tampa was used extensively on the International Ice Patrol and also during the Gasparilla Carnival at Tampa, Florida and other regattas as a patrol vessel. It was sunk with the highest American naval combat casualty loss in World War I.

USS <i>Calypso</i> (AG-35)

The third USS Calypso (AG-35) was launched 6 January 1932 for the United States Coast Guard as USCGC Calypso (WPC-104) by the Bath Iron Works in Bath, Maine. She was initially stationed at San Diego, California and transferred to Baltimore, Maryland in 1938. She was transferred from the Coast Guard to the U.S. Navy on 17 May 1941 and commissioned the same day.

USRC <i>Manning</i> (1898)

USRC Manning was a revenue cutter of the United States Revenue Cutter Service that served from 1898 to 1930, and saw service in the U.S. Navy in the Spanish–American War and World War I.

USRC <i>Onondaga</i>

USRC Onondaga was an Algonquin-class cutter built for the U.S. Revenue Cutter Service for service on the Great Lakes. Because of the Spanish–American War, she was cut in half shortly before completion and transported to Ogdensburg, New York for service on the Atlantic coast although the war ended before she could be put into service. After the formation of the United States Coast Guard in 1915 she became USCGC Onondaga. She served as a patrol vessel at various Atlantic coast ports before World War I and unlike most Coast Guard cutters during World War I, she remained under the control of the Commandant of the Coast Guard. After the war she patrolled for a brief time based at New London, Connecticut before being decommissioned in 1923.

USRC <i>Dexter</i> (1874)

USRC Dexter was a Dexter-class cutter of the United States Revenue Cutter Service in commission from 1874 to 1908. She was the second ship of the Revenue Cutter Service to bear the name. The other Dexter-class cutters, all commissioned in 1874, were Dallas and Rush. Dexter was built by the Atlantic Works Company at Boston, Massachusetts. Captain John A. Henriques accepted her for service on 6 June 1874, and she was commissioned into the Revenue Cutter Service on 18 June 1874. Her role in the rescue of passengers from the sinking SS City of Columbus under winter gale winds brought her nationwide popular acclaim.

USRC Forward was a revenue cutter constructed for the U.S. Revenue Cutter Service in 1882 by Pusey & Jones shipyard in Wilmington, Delaware. She was the second Revenue Cutter Service vessel named Forward and was named for Walter Forward, the fifteenth United States Secretary of the Treasury. The iron-hulled vessel originally cost US$72,750 and was powered by a two-cylinder steam engine with a topsail schooner brigantine sail pattern. Although Forward was considered a model ship at the time of its construction, it was severely underpowered and had unreliable machinery. The cost of repairs in the first fifteen years of operation was US$52,000.

The capture of the schooner Bravo was a naval battle fought in 1819 between United States Revenue Cutter Service cutters and one of Jean Lafitte's pirate ships.

USRC <i>Snohomish</i> (1908)

The USRC Snohomish was a 152 ft (46 m) seagoing tug built at the specific direction of Congress by Pusey & Jones, Wilmington, Delaware for service on the Pacific Northwest coast. She was fitted with latest lifesaving and property saving equipment available at the time of her construction and originally cost $189,000. She was commissioned by the United States Revenue Cutter Service on 15 November 1908 and arrived at her homeport of Neah Bay, Washington by way of passage around Cape Horn in 1909.

USCGC <i>Unalga</i> (WPG-53)

USCGC Unalga (WPG-53) was a Miami-class cutter that served in the United States Revenue Cutter Service and later the U.S. Coast Guard and U.S. Navy. The early part of her career was spent patrolling the Pacific coast of the United States and the Bering Sea. After 1931 she did patrol work off Florida and in the Caribbean. After Unalga was sold in 1946, she was renamed after Jewish Agency leader Haim Arlosoroff and used for six months for moving Jewish refugees from Europe to Palestine before being forced to run aground by British Navy ships near Haifa.

References

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.