USS Caldwell (DD-69). | |
History | |
---|---|
United States | |
Name | USS Caldwell (DD-69) |
Namesake | James R. Caldwell |
Builder | Mare Island Navy Yard |
Laid down | 9 December 1916 |
Launched | 10 July 1917 |
Commissioned | 1 December 1917 |
Decommissioned | 27 June 1922 |
Stricken | 7 January 1936 |
Fate | Scrapped |
General characteristics | |
Class and type | Caldwell-class destroyer |
Displacement | |
Length | 315 ft 6 in (96.2 m) |
Beam | 30 ft 7 in (9.32 m) |
Draught | 8 ft 10 in (2.7 m) |
Installed power |
|
Propulsion | 2 shafts, 2 steam turbines |
Speed | 30 knots (56 km/h; 35 mph) |
Range | 2,500 nautical miles (4,600 km; 2,900 mi) at 20 knots (37 km/h; 23 mph) |
Complement | 5 officers, 95 enlisted men |
Armament |
|
USS Caldwell (DD-69) was the lead ship of her class of destroyers built for the United States Navy in the 1910s.
The Caldwells were a transitional design between the "thousand-tonners" of the Sampson-class and the mass-produced destroyers built during World War I. They introduced the flush-deck and were known as the first of the "flush deckers" that were so wet in heavy weather. The ship displaced 1,262 long tons (1,282 t) at standard load and 1,379 long tons (1,401 t) at deep load. They had an overall length of 315 feet 6 inches (96.2 m), a beam of 30 feet 7 inches (9.3 m) and a draught of 8 feet 10 inches (2.7 m). They had a crew of 5 officers and 95 enlisted men. [1]
The propulsion arrangements differed between the ships of the class. Caldwell was powered by two Curtis steam turbines, each driving one propeller shaft, using steam provided by four Thornycroft boilers. The turbines developed a total of 18,500 shaft horsepower (13,800 kW) and were designed to reach a speed of 30 knots (56 km/h; 35 mph). [2] Caldwell reached 31.7 kilotonnes (31,200 long tons; 34,900 short tons) during sea trials. [3] The ships carried a maximum of 205 long tons (208 t) of fuel oil that gave them a range of 2,500 nautical miles (4,600 km; 2,900 mi) at 20 knots (37 km/h; 23 mph). [4]
The ships were armed with four 4-inch (102 mm) guns in single mounts and were fitted with two 1-pounder guns for anti-aircraft defense. Their primary weapon, though, was their torpedo battery of a dozen 21 inch (533 mm) torpedo tubes in four triple mounts. [2] During World War I, the 1-pounders were replaced by 3-inch (76 mm) anti-aircraft (AA) guns and a "Y-gun" depth charge thrower replaced the aft AA gun and the searchlight. [5]
Caldwell was launched 10 July 1917 by Mare Island Navy Yard, sponsored by Miss C. Caldwell, and commissioned 1 December 1917, Lieutenant Commander B. McCandless in command. She was the first Navy ship named for Lieutenant James R. Caldwell (1778-1804). Ordered to join the Atlantic Fleet, Caldwell reached Norfolk, Virginia, 8 January 1918, and Queenstown, Ireland, 5 March. She participated in patrol and convoy escort duty, which were interrupted when Caldwell aided in urgent experimental work on underwater listening devices to employ against German submarines. After the close of World War I, Caldwell transported troops to Brest, France, and while there joined the escort for President Woodrow Wilson in George Washington as he entered the harbor.
Caldwell returned home for operations with the Norfolk Division, Destroyer Force, Atlantic Fleet, and with Destroyer Squadron 3 along the United States East Coast during 1919. Placed in reserve in August 1920, she operated with a reduced complement out of Charleston, South Carolina, and Newport, Rhode Island. She was decommissioned at Philadelphia Navy Yard 27 June 1922. She was sold there 30 June 1936.
USS Murray (DD-97) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Kimberly (DD-80) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Dyer (DD-84) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Bell (DD-95) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Hazelwood (DD-107) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Hart (DD-110) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Ingraham (DD-111) was a Wickes-class destroyer built for the United States Navy during World War I.
USS DeLong (DD-129) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Biddle (DD-151) was a Wickes-class destroyer in the United States Navy during World War II, later reclassified AG-114. She was the second ship named for Captain Nicholas Biddle.
USS Meredith (DD-165) was a Wickes-class destroyer built for the United States Navy during World War I. She was the first destroyer in the United States Navy that named for a marine.
USS Bush (DD-166) was a Wickes-class destroyer built for the United States Navy during World War I.
USS Sproston (DD-173) was a Wickes-class destroyer built for the United States Navy during World War I.
USS O'Bannon (DD-177) was a Wickes-class destroyer built for the United States Navy during World War I.
Four destroyers in the United States Navy comprised the Cassin class. All served as convoy escorts during World War I. The Cassins were the first of five "second-generation" 1000-ton four-stack destroyer classes that were front-line ships of the Navy until the 1930s. They were known as "thousand tonners" for their normal displacement, while the previous classes were nicknamed "flivvers" for their small size, after the Model T Ford.
The Sampson-class destroyers served in the United States Navy during World War I. Commissioned in 1916 and 1917, the class was a modification of the O'Brien and Tucker classes, with the number of 21-inch (533 mm) torpedo tubes increased from four twin-mounts to four triple-mounts. The Sampsons were the final six ships of the 26 "thousand tonner" destroyers. They were the largest and most heavily armed of the "thousand tonners", and the subsequent "flush deck" classes differed mainly in hull design and the engineering plant.
USS Craven (DD-70), later renamed USS Conway (DD-70), a Caldwell-class destroyer, was in commission in the United States Navy from 1918 to 1922 and briefly in 1940, and later in the Royal Navy as HMS Lewes from 1940 to 1945.
USS Gwin (DD-71) was one of six Caldwell-class destroyers built for the United States Navy. She was in commission from 1920 to 1922.
USS Reno (DD-303) was a Clemson-class destroyer built for the United States Navy during World War I.
USS Preston (DD-327) was a Clemson-class destroyer built for the United States Navy during World War I.
The Caldwell class was a class of six "flush deck" United States Navy destroyers built during World War I and shortly after. Four served as convoy escorts in the Atlantic; the other two were completed too late for wartime service. Two were scrapped during the 1930s, but four survived to serve throughout World War II, three of these in service with the Royal Navy under the Destroyers for Bases Agreement and the fourth as a high speed transport.