Recreational scuba certification levels

Last updated

Recreational scuba certification levels are the levels of skill represented by recreational scuba certification. Each certification level is associated with a specific training standard published by the certification agency, and a training programme associated with the standard., though in some cases recognition of prior learning can apply. These levels of skill can be categorised in several ways:

Contents

Certification indicates that a diver was assessed as meeting the minimum requirements in the prescribed range of skills for that certification by an instructor registered by the issuing agency at the time of assessment. Most certification is not limited by time, and does not require periodical reassessment, or even that the holder maintains the minimum level of specified skills, but there are exceptions, which may be indicated by an expiry date on the certification card. Certification requiring periodic update usually indicates a requirement to re-register with the agency and payment of membership fees, but may also be associated with a requirement to provide evidence of skill retention. This is common for dive leadership certification where the holder is in a position of trust or legal responsibility to clients, where the agency needs to maintain a level of due diligence.

History

The history of recreational scuba certification is mostly the history of recreational scuba training, as the need for a method of identifying the competent diver was part of the reason for instituting formal training for recreational diving, following a number of fatal accidents involving untrained divers.

Training standards

A diver training standard is a document issued by a certification, registration, regulation or quality assurance agency, that describes the prerequisites for participation, the aim of the training programme, the specific competences that a candidate must demonstrate to be assessed as competent, and the minimum required experience that must be recorded before the candidate can be registered or certified at a specific grade by the agency. [1] Training standards allow objective comparison between the training provided by various agencies and the competence indicated by certification or registration to the specific standard, though in most cases, training and competence may exceed the minimum requirement much of the time, and variation between newly certified divers can be considerable, partly due to differences in the training, and partly due to qualities of the candidate. Training standards may narrowly prescribe the training, or may concentrate on assessment of exit level competence, and allow recognition of prior learning based on various forms of evidence. To be useful, a training standard must be sufficiently specific to allow agreement on the requirements by most readers reasonably competent in the field, including the instructors, assessors, and learners who must use it, and any quality assurance personnel who may need to enforce it. A training standard may be associated with a specific code of practice referring to how the training should be carried out and the facilities required. [2] [3]

Core diving competence

Scuba diving education levels as used by ISO, PADI, CMAS, SSI and NAUI Scuba education levels.svg
Scuba diving education levels as used by ISO, PADI, CMAS, SSI and NAUI

This class of certification covers competence to dive within the scope of what is generally considered recreational open water diving, with no planned decompression obligations, a single air or nitrox breathing gas and relying on the buddy system or a dive leader for emergency management.

Certification exceeding Autonomous diver

Most certification agencies provide diving skills training and certification beyond the Autonomous diver standard:

Dive leadership

Specialist skills

Skills which are not directly required for open-water diving using standard recreational scuba equipment and the protocols taught for basic recreational diving may be taught and certification issued attesting to competence in those skills. There are a wide range of specialist skills, which may be categorised in the following basic groups. In many cases there is some overlap of category, as when a type of activity requires specific equipment, or when equipment is required for safety in a given environment, such as navigation and redundant gas supply in penetration dives.

Training programs with certification are available in:

Diving support skills

These certifications do not necessarily license the holder to work on life support equipment to be used by another person. In some cases the certification aligns with legislation. In some cases the certification is the de facto industry standard for competence in a specific jurisdiction.

International and inter-agency recognition

The International Organization for Standardization has approved six recreational diving standards that may be implemented worldwide (January 2007).

The listed standards developed by the (United States) RSTC are consistent with the applicable ISO Standards: [15]

(USA) RSTC StandardISO StandardAlternative ISO Title
Introductory Scuba ExperienceNo equivalent
No equivalentLevel One Diver [16] Supervised Diver
Open Water DiverLevel Two Diver [16] Autonomous Diver
Dive SupervisorLevel Three Diver [16] Dive Leader
Assistant InstructorLevel 1 Instructor [16]
Scuba InstructorLevel 2 Instructor [16]
Instructor TrainerNo equivalent
No equivalentService Provider [16]

Related Research Articles

<span class="mw-page-title-main">Professional Association of Diving Instructors</span> Recreational diver training and certification agency

The Professional Association of Diving Instructors (PADI) is a recreational diving membership and diver training organization founded in 1966 by John Cronin and Ralph Erickson. Cronin was originally a NAUI instructor who decided to form his own organization with Erickson, and to break diver training down into several modular courses instead of the single universal course then prevalent.

A divemaster (DM) is a role that includes organising and leading recreational dives, particularly in a professional capacity, and is a qualification used in many parts of the world in recreational scuba diving for a diver who has supervisory responsibility for a group of divers and as a dive guide. As well as being a generic term, 'Divemaster' is the title of the first professional rating of many training agencies, such as PADI, SSI, SDI, NASE, except NAUI, which rates a NAUI Divemaster under a NAUI Instructor but above a NAUI Assistant Instructor. The divemaster certification is generally equivalent to the requirements of ISO 24801-3 Dive Leader.

<span class="mw-page-title-main">Recreational diver training</span> Civilian diver training process

Recreational diver training is the process of developing knowledge and understanding of the basic principles, and the skills and procedures for the use of scuba equipment so that the diver is able to dive for recreational purposes with acceptable risk using the type of equipment and in similar conditions to those experienced during training.

<span class="mw-page-title-main">Recreational diving</span> Diving for the purpose of leisure and enjoyment, usually when using scuba equipment

Recreational diving or sport diving is diving for the purpose of leisure and enjoyment, usually when using scuba equipment. The term "recreational diving" may also be used in contradistinction to "technical diving", a more demanding aspect of recreational diving which requires more training and experience to develop the competence to reliably manage more complex equipment in the more hazardous conditions associated with the disciplines. Breath-hold diving for recreation also fits into the broader scope of the term, but this article covers the commonly used meaning of scuba diving for recreational purposes, where the diver is not constrained from making a direct near-vertical ascent to the surface at any point during the dive, and risk is considered low.

<span class="mw-page-title-main">British Sub-Aqua Club</span> Recreational diving club, training and certification agency based in the UK

The British Sub-Aqua Club or BSAC has been recognised since 1954 by UK Sport as the national governing body of recreational diving in the United Kingdom.

Scuba Schools International (SSI) is an organization that teaches the skills involved in scuba diving and freediving, and supports dive businesses and resorts. SSI has over 2,500 authorized dealers, 35 regional centers, and offices all over the world.

<span class="mw-page-title-main">Advanced Open Water Diver</span> Recreational scuba diving certification slightly above minimum entry level

Advanced Open Water Diver (AOWD) is a recreational scuba diving certification level provided by several diver training agencies. Agencies offering this level of training under this title include Professional Association of Diving Instructors (PADI), and Scuba Schools International (SSI). Other agencies offer similar training under different titles. Advanced Open Water Diver is one step up from entry level certification as a beginner autonomous scuba diver. A major difference between Autonomous diver equivalent Open Water Diver (OWD) certification and AOWD is that the depth limit is increased from 18 to 30 metres.

The World Recreational Scuba Training Council (WRSTC) was founded in 1999 and is dedicated to creating minimum recreational diving training standards for the various scuba diving certification agencies across the world. The WRSTC restricts its membership to national or regional councils. These councils consist of individual training organizations who collectively represent at least 50% of the annual diver certifications in the member council's country or region. A national council is referred to as a RSTC.

Master Scuba Diver (MSD) is a scuba diving certification or recognition level offered by several North American diver training agencies, such as the National Association of Underwater Instructors (NAUI), the Professional Association of Diving Instructors (PADI), Scuba Diving International (SDI), and Scuba Schools International (SSI). Other agencies offer similar programs under other names, such as "Elite Diver". Each of these agencies touts their program at this level as the highest, non-leadership program.

<span class="mw-page-title-main">Confédération Mondiale des Activités Subaquatiques</span> International organisation for underwater activities

Confédération Mondiale des Activités Subaquatiques (CMAS) is an international federation that represents underwater activities in underwater sport and underwater sciences, and oversees an international system of recreational snorkel and scuba diver training and recognition. It is also known by its English name, the World Underwater Federation, and its Spanish name, Confederación Mundial De Actividades Subacuáticas. Its foundation in Monaco during January 1959 makes it one of the world's oldest underwater diving organisations.

<span class="mw-page-title-main">Diver certification</span> Certification as competent to dive to a specified standard

A Diving certification or C-card is a document recognizing that an individual or organization authorized to do so, "certifies" that the bearer has completed a course of training as required by the agency issuing the card. This is assumed to represent a defined level of skill and knowledge in underwater diving. Divers carry a qualification record or certification card which may be required to prove their qualifications when booking a dive trip, hiring scuba equipment, filling diving cylinders or in the case of professional divers, seeking employment.

<span class="mw-page-title-main">Open Water Diver</span> Entry-level autonomous diver certification for recreational scuba diving

Open Water Diver (OWD) is an entry-level autonomous diver certification for recreational scuba diving. Although different agencies use different names, similar entry-level courses are offered by all recreational diving agencies and consist of a combination of knowledge development (theory), confined water dives and open water dives (experience) suitable to allow the diver to dive on open circuit scuba, in open water to a limited depth and in conditions similar to those in which the diver has been trained or later gained appropriate experience, to an acceptable level of safety.

<span class="mw-page-title-main">Diver training</span> Processes by which people develop the skills and knowledge to dive safely underwater

Diver training is the set of processes through which a person learns the necessary and desirable skills to safely dive underwater within the scope of the diver training standard relevant to the specific training programme. Most diver training follows procedures and schedules laid down in the associated training standard, in a formal training programme, and includes relevant foundational knowledge of the underlying theory, including some basic physics, physiology and environmental information, practical skills training in the selection and safe use of the associated equipment in the specified underwater environment, and assessment of the required skills and knowledge deemed necessary by the certification agency to allow the newly certified diver to dive within the specified range of conditions at an acceptable level of risk. Recognition of prior learning is allowed in some training standards.

<span class="mw-page-title-main">Diving instructor</span> Person who trains and assesses underwater divers

A diving instructor is a person who trains and usually also assesses competence of underwater divers. This includes freedivers, recreational divers including the subcategory technical divers, and professional divers which includes military, commercial, public safety and scientific divers.

<span class="mw-page-title-main">Autonomous diver</span> International minimum standard for entry level recreational scuba diver certification

Autonomous diver is an international minimum standard for entry level recreational scuba diver certification. It describes the minimum requirements for basic training and certification for recreational scuba divers in international standard ISO 24801-2 and the equivalent European Standard EN 14153-2. Various organizations offer training that meets the requirements of the Autonomous Diver standard. A certification which corresponds to Autonomous Diver allows for independent diving with a dive buddy in open water. Most training organizations do not recommend exceeding a depth of 18 or 20 meters at this level of certification. After completion of this certification the training can be extended to a dive leader to ISO 24801-3 or an intermediate not defined by international standards.

<span class="mw-page-title-main">Supervised diver</span> Minimum requirements for a recreational diver to dive in open water under direct supervision

Supervised diver specifies the training and certification for recreational scuba divers in international standard ISO 24801-1 and the equivalent European Standard EN 14153-1. Various diving organizations offer diving training that meets the requirements of the Supervised Diver. A diving certification which corresponds to the Supervised Diver allows for recreational diving under the direct supervision of a divemaster or recreational diving instructor in open water. Most diving organizations recommend not to exceed a diving depth of 10 to 12 metres. After the successful completion of a training equivalent to the Supervised diver, training can be extended to the Autonomous diver certification level.

Dive leader is the title of an internationally recognised recreational diving certification. The training standard describes the minimum requirements for dive leader training and certification for recreational scuba divers in international standard ISO 24801-3 and the equivalent European Standard EN 14153-3. Various organizations offer training that meets the requirements of the dive leader standard. Some agencies use the title "Dive Leader" for their equivalent certification, but several other titles are also used, "Divemaster" may be the most widespread, but "Dive Supervisor" is also used, and should not be confused with the very different status and responsibilities of a professional diving supervisor. CMAS affiliates certifications which meet the requirements of CMAS 3-star diver should meet the standard by default. The occupation of a dive leader is also known as "dive guide", and is a specialist application of a "tour guide".

<span class="mw-page-title-main">Introductory diving</span> Non-certification scuba diving experience

Introductory diving, also known as introductory scuba experience, trial diving and resort diving are dives where people without diver training or certification can experience scuba diving under the guidance of a recreational diving instructor. Introductory diving is an opportunity for interested people to find out by practical experience at a relatively low cost if they would be interested in greater involvement in scuba diving. For scuba instructors and diving schools is it an opportunity to acquire new customers. An introductory diving experience is much less time-consuming and costly than the completion of autonomous diver training, but has little lasting value, as it is an experience program only, for which no certification is issued. Introductory scuba diving experiences are intended to introduce people to recreational diving, and increase the potential client base of dive shops to include people who do not have the time or inclination to complete an entry level certification program.

A diver training standard is a document issued by a certification, registration regulation or quality assurance agency, that describes the prerequisites for participation, the aim of the training programme, the specific minimum competences that a candidate must display to be assessed as competent, and the minimum required experience that must be recorded before the candidate can be registered or certified at a specific grade by the agency. A standard is a description of the quality required of a product, or a way of doing something that has usually been derived from the experience of experts in a specific field. The purpose is to provide a reliable method for people to share a reasonably consistent expectation regarding the scope and quality of the product or service. Training standards allow objective comparison between the training provided by various agencies and the competence indicated by certification or registration to the specific standard, though in most cases, training and competence may exceed the minimum requirement much of the time, and variation between newly certified divers can be considerable, partly due to differences in the training, and partly due to qualities of the candidate. Training standards may narrowly prescribe the training, or may concentrate on assessment of exit level competence, and allow recognition of prior learning based on various forms of evidence. To be useful, a training standard must be sufficiently specific to allow agreement on the requirements by most readers reasonably competent in the field, including the instructors, assessors, and learners who must use it, the employers of persons trained, the potential customers, and any quality assurance personnel who may need to enforce it. A training standard may be linked to a code of practice referring to how the training should be carried out.

References

  1. CMAS Technical Committee (December 2010). "Introduction". CMAS International Diver Training Standards and Procedures Manual. CMAS International. p. 5.
  2. "Diving Regulations 2009". Occupational Health and Safety Act 85 of 1993 – Regulations and Notices – Government Notice R41. Pretoria: Government Printer. Archived from the original on 2016-11-04. Retrieved 3 November 2016 via Southern African Legal Information Institute.
  3. Diving Advisory Board (2007). Code of Practice for Commercial Diver Training, Revision 3 (PDF). Pretoria: South African Department of Labour. Archived from the original (PDF) on 7 November 2016. Retrieved 6 November 2016.
  4. "Recreational diving services — Requirements for the training of recreational scuba divers — Part 1: Level 1 — Supervised diver (ISO 24801-1)". ISO . Retrieved 2017-06-13.
  5. "Recreational diving services — Requirements for the training of recreational scuba divers — Part 2: Level 2 — Autonomous diver (ISO 24801-2)". ISO . Retrieved 2015-04-29.
  6. "Two Star Diver Training Programme". www.cmas.org. Retrieved 2019-08-23.
  7. "Rescue Diver Course". www.padi.com. Retrieved 29 April 2020.
  8. "SDI Rescue Diver Course". www.tdisdi.com. Retrieved 29 April 2020.
  9. "Diver Stress & Rescue". www.divessi.com. Retrieved 29 April 2020.
  10. "NAUI Specialty Courses". Archived 2009-03-28 at the Wayback Machine
  11. Staff. "Recreational diving services — Requirements for the training of recreational scuba divers — Part 3: Level 3 — Dive leader (ISO 24801-3:2014)". ISO . Retrieved 2015-04-29.
  12. 1 2 3 Staff. "Competencies and qualifications of recreational scuba divers Level 1-3". EUF Certification. European Underwater Federation (EUF). Retrieved 10 August 2017.
  13. BSAC HQ (21 May 2018). "BSAC retains EUF accreditations for scuba diver and instructor qualifications". www.bsac.com. Retrieved 18 November 2019.
  14. Richardson, Drew (1996). "An assessment of risk for recreational dive instructors at work". South Pacific Underwater Medicine Society Journal. 26 (2). Archived from the original on November 22, 2008. Retrieved 2013-03-30.{{cite journal}}: CS1 maint: unfit URL (link)
  15. Staff, WRSTC (2013) ISO approves 6 Diving Standards "WRSTC News". Archived from the original on 2013-10-03. Retrieved 2013-09-28. retrieved 28 September 2013
  16. 1 2 3 4 5 6 Staff. "Standards for Training Organisations/System". EUF Certification International. Retrieved 28 September 2013.