Sweet crude oil

Last updated

is a type of petroleum. The New York Mercantile Exchange designates petroleum with less than 0.5% sulfur as sweet. [1] [2]

Contents

Petroleum containing higher levels of sulfur is called sour crude oil. [3]

In the Annual Energy Outlook crude type estimates, all Alaska and Gulf of Mexico oil production is assumed to be API gravity 27-35 degrees and medium sour. Northeast crude oil production consists of approximately 30% API 27-35 medium-sour and 60% API 35-40 sour. The residual production is API 35-40 sweet. West Coast region production, coming from California, is primarily API<27 sour. Per the "Regions and crude types" discussion above, California production is categorized by its own crude type. Alaska, Gulf of Mexico, Northeast, West Coast crude oil production (14172897120).png
In the Annual Energy Outlook crude type estimates, all Alaska and Gulf of Mexico oil production is assumed to be API gravity 27-35 degrees and medium sour. Northeast crude oil production consists of approximately 30% API 27-35 medium-sour and 60% API 35-40 sour. The residual production is API 35-40 sweet. West Coast region production, coming from California, is primarily API<27 sour. Per the “Regions and crude types” discussion above, California production is categorized by its own crude type.

Sweet crude oil contains small amounts of hydrogen sulfide and carbon dioxide. High-quality, low-sulfur crude oil is commonly used for processing into gasoline and is in high demand, particularly in industrialized nations. Light sweet crude oil is the most sought-after version of crude oil as it contains a disproportionately large fraction that is directly processed (fractionation) into gasoline (naphtha), kerosene, and high-quality diesel (gas oil).

The term sweet originates from the fact that a low level of sulfur provides the oil with a relatively sweet taste and pleasant smell, compared to sulfurous oil. Nineteenth-century prospectors would taste and smell small quantities of oil to determine its quality. [4]

Producers

Producers of sweet crude oil include:

Pricing

The term "price of oil", as used in the U.S. media, generally means the cost per barrel (42 U.S. gallons) of West Texas Intermediate Crude, to be delivered to Cushing, Oklahoma during the upcoming month. This information is available from NYMEX or the U.S.  Energy Information Administration.

See also

Related Research Articles

<span class="mw-page-title-main">Petroleum</span> Naturally occurring flammable liquid

Petroleum, also known as crude oil, or simply oil, is a naturally occurring yellowish-black liquid mixture of mainly hydrocarbons, and is found in geological formations. The name petroleum covers both naturally occurring unprocessed crude oil and petroleum products that consist of refined crude oil.

<span class="mw-page-title-main">Diesel fuel</span> Liquid fuel used in diesel engines

Diesel fuel, also called diesel oil or historically heavy oil, is any liquid fuel specifically designed for use in a diesel engine, a type of internal combustion engine in which fuel ignition takes place without a spark as a result of compression of the inlet air and then injection of fuel. Therefore, diesel fuel needs good compression ignition characteristics.

<span class="mw-page-title-main">Strategic Petroleum Reserve (United States)</span> US strategic petroleum reserve

The Strategic Petroleum Reserve (SPR) is an emergency stockpile of petroleum maintained by the United States Department of Energy (DOE). It is the largest publicly known emergency supply in the world; its underground tanks in Louisiana and Texas have capacity for 714 million barrels (113,500,000 m3). The United States started the petroleum reserve in 1975 to mitigate future supply disruptions as part of the international Agreement on an International Energy Program, after oil supplies were interrupted during the 1973–1974 oil embargo.

<span class="mw-page-title-main">Oil refinery</span> Facility that processes crude oil

An oil refinery or petroleum refinery is an industrial process plant where petroleum is transformed and refined into products such as gasoline (petrol), diesel fuel, asphalt base, fuel oils, heating oil, kerosene, liquefied petroleum gas and petroleum naphtha. Petrochemical feedstock like ethylene and propylene can also be produced directly by cracking crude oil without the need of using refined products of crude oil such as naphtha. The crude oil feedstock has typically been processed by an oil production plant. There is usually an oil depot at or near an oil refinery for the storage of incoming crude oil feedstock as well as bulk liquid products. In 2020, the total capacity of global refineries for crude oil was about 101.2 million barrels per day.

<span class="mw-page-title-main">Refinery</span> Production facility for processing raw materials

A refinery is a production facility composed of a group of chemical engineering unit processes and unit operations refining certain materials or converting raw material into products of value.

<span class="mw-page-title-main">Fuel oil</span> Petroleum product burned to generate motive power or heat

Fuel oil is any of various fractions obtained from the distillation of petroleum. Such oils include distillates and residues. Fuel oils include heavy fuel oil, marine fuel oil (MFO), furnace oil (FO), gas oil (gasoil), heating oils, diesel fuel, and others.

<span class="mw-page-title-main">West Texas Intermediate</span> Grade of crude oil used as a benchmark in oil pricing

West Texas Intermediate (WTI) is a grade or mix of crude oil; the term is also used to refer to the spot price, the futures price, or assessed price for that oil. In colloquial usage, WTI usually refers to the WTI Crude Oil futures contract traded on the New York Mercantile Exchange (NYMEX). The WTI oil grade is also known as Texas light sweet. Oil produced from any location can be considered WTI if the oil meets the required qualifications. Spot and futures prices of WTI are used as a benchmark in oil pricing. This grade is described as light crude oil because of its low density and sweet because of its low sulfur content.

<span class="mw-page-title-main">Catalytic reforming</span> Chemical process used in oil refining

Catalytic reforming is a chemical process used to convert petroleum refinery naphthas distilled from crude oil into high-octane liquid products called reformates, which are premium blending stocks for high-octane gasoline. The process converts low-octane linear hydrocarbons (paraffins) into branched alkanes (isoparaffins) and cyclic naphthenes, which are then partially dehydrogenated to produce high-octane aromatic hydrocarbons. The dehydrogenation also produces significant amounts of byproduct hydrogen gas, which is fed into other refinery processes such as hydrocracking. A side reaction is hydrogenolysis, which produces light hydrocarbons of lower value, such as methane, ethane, propane and butanes.

Light crude oil is liquid petroleum that has a low density and flows freely at room temperature. It has a low viscosity, low specific gravity and high API gravity due to the presence of a high proportion of light hydrocarbon fractions. It generally has a low wax content. Light crude oil receives a higher price than heavy crude oil on commodity markets because it produces a higher percentage of gasoline and diesel fuel when converted into products by an oil refinery.

<span class="mw-page-title-main">Bonny Light oil</span>

Bonny Light oil was found at Oloibiri in the Niger delta region of Nigeria in 1956 for its commercial use. Due to its features of generating high profit, it is highly demanded by refiners. Bonny light oil has an API of 32.9, classified as light oil. It is regarded as more valuable than the other oils with lower API as more high-value products are produced in the refinement. However, in Nigeria, problems due to oil spillage caused by vandalism, affects both human and the ecosystem in detrimental ways. Some experiments on animals and soil are done to figure out those impacts on organisms.

Sour crude oil is crude oil containing a high amount of the impurity sulfur. It is common to find crude oil containing some impurities. When the total sulfur level in the oil is more than 0.5%, the oil is called "sour".

<span class="mw-page-title-main">Price of oil</span> Spot price of a barrel of benchmark crude oil

The price of oil, or the oil price, generally refers to the spot price of a barrel of benchmark crude oil—a reference price for buyers and sellers of crude oil such as West Texas Intermediate (WTI), Brent Crude, Dubai Crude, OPEC Reference Basket, Tapis crude, Bonny Light, Urals oil, Isthmus, and Western Canadian Select (WCS). Oil prices are determined by global supply and demand, rather than any country's domestic production level.

<span class="mw-page-title-main">Benchmark (crude oil)</span> Reference price for trading of an oil commodity

A benchmark crude or marker crude is a crude oil that serves as a reference price for buyers and sellers of crude oil. There are three primary benchmarks, West Texas Intermediate (WTI), Brent Blend, and Dubai Crude. Other well-known blends include the OPEC Reference Basket used by OPEC, Tapis Crude which is traded in Singapore, Western Canadian Select used in Canada, Bonny Light used in Nigeria, Urals oil used in Russia and Mexico's Isthmus. Energy Intelligence Group publishes a handbook which identified 195 major crude streams or blends in its 2011 edition.

<span class="mw-page-title-main">Mazut</span> Fuel oil

Mazut is a low-quality heavy fuel oil, used in power plants and similar applications in the countries of the former Soviet Union. In the West, through Fluid catalytic cracking, mazut is distilled into diesel and other light distillates. Mazut may be used for heating houses in the former USSR and in countries of the Far East that do not have the facilities to blend or break it down into more conventional petro-chemicals.

<span class="mw-page-title-main">Natural-gas processing</span> Industrial processes designed to purify raw natural gas

Natural-gas processing is a range of industrial processes designed to purify raw natural gas by removing contaminants such as solids, water, carbon dioxide (CO2), hydrogen sulfide (H2S), mercury and higher molecular mass hydrocarbons (condensate) to produce pipeline quality dry natural gas for pipeline distribution and final use. Some of the substances which contaminate natural gas have economic value and are further processed or sold. Hydrocarbons that are liquid at ambient conditions: temperature and pressure (i.e., pentane and heavier) are called natural-gas condensate (sometimes also called natural gasoline or simply condensate).

Crude oil is extracted from the bedrock before being processed in several stages, removing natural contaminants and undesirable hydrocarbons. This separation process produces mineral oil, which can in turn be denoted as paraffinic, naphthenic or aromatic. The differences between these different types of oils are not clear-cut, but mainly depend on the predominant hydrocarbon types in the oil. Paraffinic oil, for example, contains primarily higher alkanes, whereas naphthenic oils have a high share of cyclic alkanes in the mixture.

Tapis crude is a Malaysian crude oil used as a pricing benchmark in Singapore. Tapis is very light, with an API gravity of 43°-45°, and very sweet, with only about 0.04% sulfur. While it is not traded on a market like Brent Crude or West Texas Intermediate (WTI), it is often used as an oil marker or price referencing indicator for Asia and Australia.

<span class="mw-page-title-main">Petroleum refining processes</span> Methods of transforming crude oil

Petroleum refining processes are the chemical engineering processes and other facilities used in petroleum refineries to transform crude oil into useful products such as liquefied petroleum gas (LPG), gasoline or petrol, kerosene, jet fuel, diesel oil and fuel oils.

Western Canadian Select (WCS) is a heavy sour blend of crude oil that is one of North America's largest heavy crude oil streams and, historically, its cheapest. It was established in December 2004 as a new heavy oil stream by EnCana (now Cenovus), Canadian Natural Resources, Petro-Canada (now Suncor) and Talisman Energy (now Repsol Oil & Gas Canada). It is composed mostly of bitumen blended with sweet synthetic and condensate diluents and 21 existing streams of both conventional and unconventional Alberta heavy crude oils at the large Husky Midstream General Partnership terminal in Hardisty, Alberta. Western Canadian Select—the benchmark for heavy, acidic (TAN <1.1) crudes—is one of many petroleum products from the Western Canadian Sedimentary Basin oil sands. Calgary-based Husky Energy, now a subsidiary of Cenovus, had joined the initial four founders in 2015.

References

  1. "Oil markets explained". BBC News. 'Sweet' crude is defined as having a sulphur content of less than 0.5%.
  2. Szymon Wlazlowski , Björn Hagströmer & Monica Giulietti (2011). "Causality in crude oil prices". Applied Economics. 43 (24). Applied Economics (Vol. 43 Issue24): 3337–3347. doi:10.1080/00036841003636250. S2CID   154524771. Crudes are considered to be sweet when the sulphur content does not exceed 0.5% and sour otherwise.
  3. Lord, David L. (2014-11-01). "Crude Oil Properties Overview". OSTI   1504035.{{cite journal}}: Cite journal requires |journal= (help)
  4. "Description of the MC 252 Crude Oil" (PDF). Oil Spill Academic Task Force, State of Florida. Retrieved January 28, 2011.