2,4-Dinitroaniline

Last updated
2,4-Dinitroaniline [1] [2]
2,4-Dinitroaniline-3D-balls.png
The ball-and-stick structure of 2,4-dinitroaniline
2,4-Dinitroanilin.svg
The chemical structure of 2,4-dinitroaniline
Names
Preferred IUPAC name
2,4-Dinitroaniline
Other names
1-Amino-2,4-dinitrobenzene
Identifiers
3D model (JSmol)
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.002.322 OOjs UI icon edit-ltr-progressive.svg
EC Number
  • 202-553-5
KEGG
PubChem CID
RTECS number
  • BX9100000
UNII
UN number 1596
  • InChI=1S/C6H5N3O4/c7-5-2-1-4(8(10)11)3-6(5)9(12)13/h1-3H,7H2
    Key: LXQOQPGNCGEELI-UHFFFAOYSA-N
  • C1=CC(=C(C=C1[N+](=O)[O-])[N+](=O)[O-])N
Properties
C6H5N3O4
Molar mass 183.123 g·mol−1
AppearanceColorless to yellowish combustible powder
Density 1.61 g/cm3
Melting point 187.8 °C (370.0 °F; 460.9 K)
Boiling point Decomposes
0.06 g/L (20 °C)
Solubility Soluble in acetone, ethyl acetate, acetonitrile and most alcohols · insoluble in water
Acidity (pKa)-4.53 (conjugate acid) ; 18.46
Explosive data
Shock sensitivity Low
Friction sensitivity Low
Detonation velocity 4,800 m/s [note 1]
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
Explosive, Flammable, Toxic, Health and Environmental hazards
GHS labelling:
GHS-pictogram-explos.svg GHS-pictogram-flamme.svg GHS-pictogram-skull.svg GHS-pictogram-exclam.svg GHS-pictogram-silhouette.svg GHS-pictogram-pollu.svg
Danger
H228, H300, H310, H330, H373, H411
P260, P262, P264, P270, P271, P273, P280, P284, P301+P310, P302+P350, P304+P340, P310, P314, P320, P321, P322, P330, P361, P363, P391, P403+P233, P405, P501
NFPA 704 (fire diamond)
NFPA 704.svgHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 3: Capable of detonation or explosive decomposition but requires a strong initiating source, must be heated under confinement before initiation, reacts explosively with water, or will detonate if severely shocked. E.g. hydrogen peroxideSpecial hazards (white): no code
3
1
3
Flash point 224 °C (435 °F; 497 K)
Lethal dose or concentration (LD, LC):
285 mg/kg (oral, rat)
Related compounds
Related compounds
2,4,6-Trinitroaniline

4-Nitroaniline

Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

2,4-Dinitroaniline is a chemical compound with a formula of C6H5N3O4. It is used as an explosive and as a reagent to detect and characterize aldehydes and ketones.

Contents

Preparation

2,4-Dinitroaniline can be prepared by reaction of 1-chloro-2,4-dinitrobenzene with ammonia.

It can be also prepared by the electrophilic aromatic substitution of aniline. Direct nitration should not be used due to the reactivity of aniline. (i.e. It can be protonated to anilinium or oxidized easily.) Instead the acetyl protection should be used.

Basicity

Compared to aniline, the basicity of 2,4-dinitroaniline is even weaker. It is due to the electron-withdrawing nature of the nitro groups. This makes the pKa of conjugate acid of 2,4-dinitroaniline being even lower than that of hydronium ions, meaning that it is a strong acid.

The protons in the amino group is also much more acidic than that of aniline.

Uses

2,4-Dinitroaniline is usually used as an explosive, although the material possess a negative oxygen balance and can be improved by combining it with an oxidizer such as ammonium nitrate. When in pure form, 2,4-Dinitroaniline has a VoD of 4,800 m/s at 1.61 g/cm3 molecular density.

It is also used for the manufacture of certain azo dyes and disperse dyes, as well as in printing ink, toner, and the preparation of preservatives. The compound also finds applications as an intermediate in the synthesis of neutral dyes, sulfur dyes, and organic pigments.

Safety

2,4-Dinitroaniline is moderately toxic, with a lethal dose of 285 mg/kg. However, the main danger is that it is explosive and flammable with heat or friction encouraging these properties.

See also

Related Research Articles

<span class="mw-page-title-main">Nitric acid</span> Highly corrosive mineral acid

Nitric acid is an inorganic compound with the formula HNO3. It is a highly corrosive mineral acid. The compound is colorless, but samples tend to acquire a yellow cast over time due to decomposition into oxides of nitrogen. Most commercially available nitric acid has a concentration of 68% in water. When the solution contains more than 86% HNO3, it is referred to as fuming nitric acid. Depending on the amount of nitrogen dioxide present, fuming nitric acid is further characterized as red fuming nitric acid at concentrations above 86%, or white fuming nitric acid at concentrations above 95%.

<span class="mw-page-title-main">TNT</span> Impact-resistant high explosive

Trinitrotoluene, more commonly known as TNT (and more specifically 2,4,6-trinitrotoluene), and by its preferred IUPAC name 2-methyl-1,3,5-trinitrobenzene, is a chemical compound with the formula C6H2(NO2)3CH3. TNT is occasionally used as a reagent in chemical synthesis, but it is best known as an explosive material with convenient handling properties. The explosive yield of TNT is considered to be the standard comparative convention of bombs and asteroid impacts. In chemistry, TNT is used to generate charge transfer salts.

<span class="mw-page-title-main">Dinitrogen tetroxide</span> Chemical compound

Dinitrogen tetroxide, commonly referred to as nitrogen tetroxide (NTO), and occasionally (usually among ex-USSR/Russian rocket engineers) as amyl, is the chemical compound N2O4. It is a useful reagent in chemical synthesis. It forms an equilibrium mixture with nitrogen dioxide. Its molar mass is 92.011 g/mol.

<span class="mw-page-title-main">Aniline</span> Organic compound (C₆H₅NH₂); simplest aromatic amine

Aniline is an organic compound with the formula C6H5NH2. Consisting of a phenyl group attached to an amino group, aniline is the simplest aromatic amine. It is an industrially significant commodity chemical, as well as a versatile starting material for fine chemical synthesis. Its main use is in the manufacture of precursors to polyurethane, dyes, and other industrial chemicals. Like most volatile amines, it has the odor of rotten fish. It ignites readily, burning with a smoky flame characteristic of aromatic compounds. It is toxic to humans.

<span class="mw-page-title-main">Nitrobenzene</span> Chemical compound

Nitrobenzene is an aromatic nitro compound and the simplest of the nitrobenzenes, with the chemical formula C6H5NO2. It is a water-insoluble pale yellow oil with an almond-like odor. It freezes to give greenish-yellow crystals. It is produced on a large scale from benzene as a precursor to aniline. In the laboratory, it is occasionally used as a solvent, especially for electrophilic reagents.

<span class="mw-page-title-main">Nitration</span> Chemical reaction which adds a nitro (–NO₂) group onto a molecule

In organic chemistry, nitration is a general class of chemical processes for the introduction of a nitro group into an organic compound. The term also is applied incorrectly to the different process of forming nitrate esters between alcohols and nitric acid. The difference between the resulting molecular structures of nitro compounds and nitrates is that the nitrogen atom in nitro compounds is directly bonded to a non-oxygen atom, whereas in nitrate esters, the nitrogen is bonded to an oxygen atom that in turn usually is bonded to a carbon atom.

<span class="mw-page-title-main">Hexanitrobenzene</span> Chemical compound

Hexanitrobenzene, also known as HNB, is a nitrobenzene compound in which six nitro groups are bonded to all six positions of a central benzene ring. It is a high-density explosive compound with chemical formula C6N6O12, obtained by oxidizing the amine group of pentanitroaniline with hydrogen peroxide in sulfuric acid.

<span class="mw-page-title-main">Azo compound</span> Organic compounds with a diazenyl group (–N=N–)

Azo compounds are organic compounds bearing the functional group diazenyl.

<span class="mw-page-title-main">Tollens' reagent</span> Chemical reagent used to distinguish between aldehydes and ketones

Tollens' reagent is a chemical reagent used to distinguish between aldehydes and ketones along with some alpha-hydroxy ketones which can tautomerize into aldehydes. The reagent consists of a solution of silver nitrate, ammonium hydroxide and some sodium hydroxide. It was named after its discoverer, the German chemist Bernhard Tollens. A positive test with Tollens' reagent is indicated by the precipitation of elemental silver, often producing a characteristic "silver mirror" on the inner surface of the reaction vessel.

<span class="mw-page-title-main">3,3'-Diaminobenzidine</span> Chemical compound

3,3′-Diaminobenzidine (DAB) is an organic compound with the formula (C6H3(NH2)2)2. This derivative of benzidine is a precursor to polybenzimidazole, which forms fibers that are renowned for their chemical and thermal stability. As its water-soluble tetrahydrochloride, DAB has been used in immunohistochemical staining of nucleic acids and proteins.

2,4-Dinitrophenylhydrazine (2,4-DNPH or DNPH) is the organic compound C6H3(NO2)2NHNH2. DNPH is a red to orange solid. It is a substituted hydrazine. The solid is relatively sensitive to shock and friction. For this reason DNPH is usually handled as a wet powder. DNPH is a precursor to the drug Sivifene.

<span class="mw-page-title-main">Azo dye</span> Class of organic compounds used as dye

Azo dyes are organic compounds bearing the functional group R−N=N−R′, in which R and R′ are usually aryl and substituted aryl groups. They are a commercially important family of azo compounds, i.e. compounds containing the C-N=N-C linkage. Azo dyes are synthetic dyes and do not occur naturally. Most azo dyes contain only one azo group but there are some that contain two or three azo groups, called "diazo dyes" and "triazo dyes" respectively. Azo dyes comprise 60-70% of all dyes used in food and textile industries. Azo dyes are widely used to treat textiles, leather articles, and some foods. Chemically related derivatives of azo dyes include azo pigments, which are insoluble in water and other solvents.

<span class="mw-page-title-main">1,3,5-Triazido-2,4,6-trinitrobenzene</span> Chemical compound

1,3,5-Triazido-2,4,6-trinitrobenzene, also known as TATNB (triazidotrinitrobenzene) and TNTAZB (trinitrotriazidobenzene), is an aromatic high explosive composed of a benzene ring with three azido groups (-N3) and three nitro groups (-NO2) alternating around the ring, giving the chemical formula C6(N3)3(NO2)3. Its detonation velocity is 7,350 meters per second, which is comparable to TATB (triaminotrinitrobenzene).

Nitrophenols are compounds of the formula HOC6H5−x(NO2)x. The conjugate bases are called nitrophenolates. Nitrophenols are more acidic than phenol itself.

The chemical element nitrogen is one of the most abundant elements in the universe and can form many compounds. It can take several oxidation states; but the most common oxidation states are -3 and +3. Nitrogen can form nitride and nitrate ions. It also forms a part of nitric acid and nitrate salts. Nitrogen compounds also have an important role in organic chemistry, as nitrogen is part of proteins, amino acids and adenosine triphosphate.

<span class="mw-page-title-main">2,4,6-Trinitroaniline</span> Chemical compound

2,4,6-Trinitroaniline, C6H4N4O6, abbreviated as TNA and also known as picramide, a nitrated amine. Materials in this group range from slight to strong oxidizing agents. If mixed with reducing agents, including hydrides, sulfides and nitrides, they may begin a vigorous reaction that culminates in a detonation. The aromatic nitro compounds may explode in the presence of a base such as sodium hydroxide or potassium hydroxide even in the presence of water or organic solvents. The explosive tendencies of aromatic nitro compounds are increased by the presence of multiple nitro groups. The appearance of trinitroaniline varies from yellow to orange to red depending on its purity and concentration.

Tetranitromethane or TNM is an organic oxidizer with chemical formula C(NO2)4. Its chemical structure consists of four nitro groups attached to one carbon atom. In 1857 it was first synthesised by the reaction of sodium cyanoacetamide with nitric acid.

<span class="mw-page-title-main">Ammonium dinitramide</span> Chemical compound

Ammonium dinitramide (ADN) is an inorganic compound with the chemical formula [NH4][N(NO2)2]. It is the ammonium salt of dinitraminic acid HN(NO2)2. It consists of ammonium cations [NH4]+ and dinitramide anions N(NO2)2. ADN decomposes under heat to leave only nitrogen, oxygen, and water.

<span class="mw-page-title-main">2,4-Dinitroanisole</span> Chemical compound

2,4-Dinitroanisole (DNAN) is a low sensitivity organic compound. It has an anisole (methoxybenzene) core, with two nitro groups (–NO2) attached.

<span class="mw-page-title-main">Dinitroaniline</span> Class of chemical compounds

Dinitroanilines are a class of chemical compounds with the chemical formula C6H5N3O4. They are derived from both aniline and dinitrobenzenes. There are six isomers: 2,3-dinitroaniline, 2,4-dinitroaniline, 2,5-dinitroaniline, 2,6-dinitroaniline, 3,4-dinitroaniline, and 3,5-dinitroaniline.

References

  1. "2,4-Dinitroaniline CAS#: 97-02-9". www.chemicalbook.com. Retrieved 2019-03-23.
  2. PubChem. "2,4-Dinitroaniline". pubchem.ncbi.nlm.nih.gov. Retrieved 2019-03-23.

note 1 Calculated from the detonation velocity of 2,4,6-trinitroaniline by multiplying 2/3