Aviatik (Berg) Dr.I

Last updated
Aviatik 30.24
RoleFighter aircraft
Manufacturer Aviatik
Designer Julius von Berg
First flightOctober 1917
Statusprototype only
Primary user Luftstreitkräfte
Number built1+3 unfinished prototypes

The Aviatik 30.24 was a prototype Austro-Hungarian triplane fighter built by Aviatik in World War I.

Contents

Design

In April 1917, through his employer, Julius von Berg offered the aviation arsenal (Fliegerarsenal, abbreviated Flars) to purchase aircraft for LFT:

Flars refused a two-seater, but agreed to acquire a triplane fighter, which, if adopted, would have received the designation Aviatik Dr.I. On September 17, 1917, Julius von Berg presented to the aviation arsenal the final documentation of the aircraft, which received the type 30.24 internal designation (at Aviatik, the number 30 was the designation of prototypes, the second number after the dot signified a specific design in the corporate list).

The triplane 30.24 was a massive aircraft of solid wood construction (only ailerons and elevators and directions were made of steel pipes and web). The fuselage and tail assembly were almost completely taken from the proven design of the DI biplane fighter. The difference was the shortened gargrot behind the pilot's cabin (the biplane DI had the gargrot all the way to the keel).

Installed with a strong forward carrying out, the wings were single-spar with linen covering. The wing sizes were different: the upper one had a span of 7.23 m, the average was 7.13 m, and the lower one was 7.00 m. The ailerons with cable control were installed only on the upper wing. In contrast to the middle wing, the upper and lower wings were one-piece. The upper wing was connected to the fuselage by means of N-shaped central planes. The lower wing went under the fuselage and was attached to it with the help of four short racks. In order to provide at least some forward-and-down view, the root parts of the middle wing consoles had celluloid lining. Bearing surfaces were reinforced with two pairs of interplanar struts reinforced with a bracing system.

The front of the aircraft had a typical frontal radiator, behind which was a six-cylinder in-line water-cooled engine Austro-Daimler AD 6 (18th series). The engine developed power of 185 hp (136 kW) and rotated the four-bladed wooden screw Jaray, the blades of which were mounted with the letter X.

Production of protototypes

In September 1917, Flugzeugfabrik Aviatik received a contract from Flars to build four prototypes of the 30.24. The first prototype carried the factory designation 30.24; the rest of the cars for which constructive changes were foreseen were not given signs. Julius von Berg was still working on these three cars, intending to apply the flight test experience to them and, in accordance with the requirements of the aviation arsenal, install the Austro-Daimler AD 6 engine (19th series).

The finished prototype 30.24 from the Flugzeugfabrik Aviatik plant, located in the Heiligenstadt district of Vienna, was transported in an onboard truck a few kilometers east off Aspernu to the airfield of an aviation arsenal, where its first flight took place in October 1917.

Testing

The first tests of an unarmed prototype caused some disappointment. Although the aircraft was more maneuverable in the longitudinal plane and had a better rate of climb, its overall flight performance was not much superior to D.I.

In Aspern, the modified 30.24 reappeared in February 1918 and was raised to the sky on the 26th. However, the adjustment did not bring major improvements. One way or another, but the era of triplane is over. The aviation arsenal refused to launch the aircraft into mass production and transferred the only car to the Flek 8 division, from which it was transferred for experiments to the Flek 6 division located in Wiener Neustadt.

Several types of radiators, propellers were tested on the aircraft and the cockpit was modified to improve the front view of the pilot. These works were carried out in the interests of improving serial DI biplane fighters (these fighters were equipped with at least eight different types of radiators and propellers).

In September 1918, the Austro-Hungarian Air Force officially ("formally") transferred the 30.24 plane to the state balance and paid the company for its cost. Three unfinished prototypes were ordered to be dismantled, without waiting for the corresponding factory designations. So ended the career of von Berg triplane fighters. Interestingly, in April 1920, the prototype 30.24 appeared in the list of Austrian aircraft proposed by Czechoslovakia for purchase! [1]

Specifications (30.24)

Data from Austro-Hungarian Army Aircraft of World War One [1]

General characteristics

later fitted with a 150 kW (200 hp) Austro-Daimler 200hp engine

Performance

Armament

Related Research Articles

<span class="mw-page-title-main">Albatros D.III</span> 1916 fighter aircraft by Albatros

The Albatros D.III was a biplane fighter aircraft used by the Imperial German Army Air Service (Luftstreitkräfte) during World War I. A modified licensed version was built by Oeffag for the Austro-Hungarian Air Service (Luftfahrtruppen). The D.III was flown by many top German aces, including Wilhelm Frankl, Erich Löwenhardt, Manfred von Richthofen, Karl Emil Schäfer, Ernst Udet, and Kurt Wolff, and Austro-Hungarians like Godwin von Brumowski. It was the preeminent fighter during the period of German aerial dominance known as "Bloody April" 1917.

<span class="mw-page-title-main">Albatros D.II</span> Type of aircraft

The Albatros D.II was a German fighter aircraft used during World War I. After a successful combat career in the early Jagdstaffeln, it was gradually superseded by the Albatros D.III.

<span class="mw-page-title-main">Fokker D.I</span> Type of aircraft

The Fokker D.I was a development of the D.II fighter. The D.I was also flown in Austro-Hungarian service as a fighter trainer aircraft under the designation B.III. Confusing the matter further, both the D.II and D.I arrived at the Front in German service at similar times, in July–August 1916. The main designer was Martin Kreutzer.

<span class="mw-page-title-main">Aviatik (Berg) D.I</span> Type of aircraft

The Aviatik (Berg) D.I, was a single-engine, single-seater biplane fighter that was developed and manufactured by the Austro-Hungarian branch of German aircraft company Aviatik. It was also known as Berg D.I or the Berg Fighter, because it was designed by Dipl. Ing. Julius von Berg, and to distinguish it from the D.I fighter built by the parent Aviatik firm in Germany.

<span class="mw-page-title-main">Fiat CR.1</span> Italian fighter aircraft

The Fiat CR.1 was an Italian biplane fighter aircraft of the 1920s. Of wood-and-fabric construction, it was designed by Celestino Rosatelli, from whom it gained the 'CR' designation. Its most distinctive feature was that the lower wings were longer than the upper ones.

<span class="mw-page-title-main">Roe I Triplane</span> British aeroplane

The Roe I Triplane was an early aircraft designed and built by A.V. Roe which was the first all-British aircraft to fly..

<span class="mw-page-title-main">DFW C.V</span> Type of aircraft

The DFW C.IV, DFW C.V, DFW C.VI, and DFW F37 were a family of German reconnaissance aircraft first used in 1916 in World War I. They were conventionally configured biplanes with unequal-span unstaggered wings and seating for the pilot and observer in tandem, open cockpits. Like the DFW C.II before them, these aircraft seated the gunner to the rear and armed him with a machine gun on a ring mount. Compared to preceding B- and C-class designs by DFW, however, the aerodynamics of the fuselage were more refined, and when coupled with more powerful engines, resulted in a machine with excellent performance.

<span class="mw-page-title-main">Hansa-Brandenburg CC</span> Flying boat

The Hansa-Brandenburg CC was a single-seat German fighter flying boat of World War I. It was used by both the Kaiserliche Marine and the Austro-Hungarian Navy.

<span class="mw-page-title-main">Hansa-Brandenburg D.I</span> WWI German Fighter Aircraft

The Hansa-Brandenburg D.I, also known as the KD was a German fighter aircraft of World War I. Despite poor handling characteristics it was put into service by Austria-Hungary, where some aircraft served until the end of the war.

The Aviatik (Berg) D.II, the prototypes of which were known as Aviatik 30.22 and Aviatik 30.38, was an Austro-Hungarian sesquiplane fighter aircraft prototype towards the end of the First World War.

<span class="mw-page-title-main">Albatros B.III</span> Type of aircraft

The Albatros B.III,, was a German World War I reconnaissance biplane, built by Albatros Flugzeugwerke as the Albatros LDD.

<span class="mw-page-title-main">Knoller C.II</span> Austro-Hungarian reconnaissance aircraft

The Knoller C.II was a reconnaissance aircraft built in Austria-Hungary during World War I for use by the Austro-Hungarian army.

<span class="mw-page-title-main">Lohner B.II</span> Type of aircraft

The Lohner B.II was a military reconnaissance aircraft produced in Austria-Hungary during World War I. It was a development of the pre-war B.I design, incorporating changes requested by the Austro-Hungarian army, but inheriting its predecessor's basic design, including its characteristic swept-back wings.

<span class="mw-page-title-main">Aviatik (Ö) C.I</span> Austo-Hungarian reconnaissance aircraft

The Aviatik C.I, the prototypes of which were known as Aviatik 30.14, Aviatik 30.15 and Aviatik 30.16, was an Austro-Hungarian 2-seat reconnaissance aircraft produced from 1917.(Note: the is not part of the designation, but used to disambiguate from the German-built Aviatik aircraft with the same designation.)

The Grahame-White Type VI was an early British military aircraft manufactured by the Grahame-White Aviation Company. Only one was built but after an abortive flight development was abandoned.

The Kondor E 3, sometimes erroneously known as E.III, was a German single seat, monoplane fighter aircraft designed and built close to the end of World War I. Though successful in the third D-type fighter competition at Aldershof in September 1918, only a few were produced, given the Idflieg designation of Kondor D.I.

<span class="mw-page-title-main">Lohner Type AA</span> Type of aircraft

The Lohner Type AA were a series of prototype fighters built during World War I. The program would eventually be cancelled due to inherent instability concerns of the design.

<span class="mw-page-title-main">Lloyd 40.08 Luftkreuzer</span> Type of aircraft

The Lloyd 40.08 Luftkreuzer was a three engine triplane bomber type built during World War I. The design was proven to be ineffective and development did not proceed past the prototype stage.

The Aviatik C.VIII was a prototype German observation aircraft built by Aviatik in World War I.

The Phönix 20.24 was a prototype German fighter plane built in the last months of World War I.

References

  1. 1 2 Grosz, Peter M.; Haddow, George; Scheiner, Peter (2002) [1993]. Austro-Hungarian Army Aircraft of World War One. Boulder: Flying Machine Press. pp. 147–149. ISBN   1-891268-05-8.

Further reading