| B.I | |
|---|---|
 | |
| Aviatik B.I (P15 type) | |
| Role | Reconnaissance aircraft |
| Manufacturer | Aviatik |
| Designer | Robert Wild |
| First flight | 1914 |
| Introduction | 1914 |
| Retired | 1916 |
| Primary user | Luftstreitkräfte |
| Variants | Aviatik B.II |
The Aviatik B.I is a German two-seat reconnaissance biplane designed and built by the Automobil und Aviatik AG company, who until then had produced copies of French designs.
The first of indigenous Aviatik biplanes, designed by Robert Wild, was the P.13, flown in April–May 1912. [1] It was built in several variants and featured large 3½-bay or 4-bay wings and . [1] The type was widely used in competitions and gained high reputation. An improved design was the P.14 of 1913, with smaller 2½-bay wings and aerodynamic and structural refinements. [2] Also in 1913, an ultimate refined design P.15 was built, with 2-bay or 3-bay wings and a fail fin. [3]
The German air force got interested in Aviatik aircraft and ordered 101 P.13 and P.14s in 1913, then further orders followed. [3] The crew sat in open tandem cockpits with the observer in the front. Initially they were designated just as Aviatik B, with a service number and two last digits of a year (e.g. B.268/13). From September 1915 the aircraft P.15 type were designated as B.I (P.15b with 100 hp engine) or B.II (P.15a with 120 hp engine). [4] There is a supposition, that earlier B-class 100 hp Aviatiks might have been designated B.I as well. [4] Aviatik B-class were unarmed, but in a course of the war, machine guns were sometimes used.
The B.I was manufactured in large numbers in Italy under licence by Società Aeronautica Meccanica Lombardia (SAML), which built 410 examples according to Aviatik's design. The firm then put two modified versions of their own into production, as designed by Robert Wild. The first of these, the SAML S.1 was powered by a Fiat A.12 engine and was armed with a Fiat-Revelli machine gun for the observer. The second version, the SAML S.2 was intended for the reconnaissance-bomber role and had a shorter wingspan, a fixed, forward-firing Fiat-Revelli machine gun in addition to the one in the rear cockpit, and a bomb load of 40 kg (90 lb). The 16 Squadriglie da Recognizione operated 660 S-1s and S-2s from 1917 onwards in Italy, Albania, and Macedonia. Two SAML S.1 participated in the Revolution of 1922 in Paraguay in the government side. They survived the conflict and they were the first planes of the new Military Aviation School, along a single Ansaldo SVA.5, an Ansaldo SVA.10 and a SPAD S.20. One S.1 was destroyed in an accident in 1928 but the other survived as a trainer during the Chaco War.
The Aviatik B.114/14 was the first aircraft shot down with gunfire in aerial combat on October 5, 1914, by a French Voisin III. [5]
Austria-Hungary 
Germany 
Kingdom of Italy 
Paraguay 
Turkey Data from Die deutschen Militärflugzeuge 1919-1934 : mit 143 Vierseitenrissen im Massstab 1:144 [6]
General characteristics
Performance
Related lists
The Gotha G.I was a heavy bomber used by the Luftstreitkräfte during World War I.
S.P.A., was an Italian automobile, military vehicle and aero-engine manufacturer founded in Turin by Matteo Ceirano and Michele Ansaldi. It was active between 1906 and 1926. In 1908, it merged with Fabbrica Ligure Automobili Genova (FLAG) and the new company, Società Ligure Piemontese Automobili, was headquartered in Genoa while manufacturing in Turin.
The Albatros C.III was a German two-seat general-purpose biplane of World War I, built by Albatros Flugzeugwerke. The C.III was a refined version of the successful Albatros C.I and was eventually produced in greater numbers than any other C-type Albatros.
The Aviatik C.I was an observation aircraft which came into service during World War I in April 1915. It was a development of the Aviatik B.I and B.II models, being one of first aircraft of the new German C class of armed biplanes. In the C.I the observer sat in front of the pilot, with a machine-gun clipped on a sliding mounting fitted on a rail at either side of the cockpit. It gave the crew the means to attack enemy aircraft. The positions of the pilot and observer were reversed in last series of 50, ordered in 1917 solely for trainer purpose. There was only one aircraft built of refined C.Ia version in May 1916, with armament still in a forward cab, serving as a prototype for C.III. Later models of the plane included the Aviatik C.II and the C.III, which had more powerful engines. The C.III was produced in large numbers.
The Ansaldo A.300 was an Italian general-purpose biplane aircraft built by the Ansaldo company of Turin from 1920 to 1929. It also served as a light bomber, transport, fighter and reconnaissance aircraft, and finally as an advanced trainer, with examples in service as late as 1940. 50 examples were also license-built in Poland at ZM E. Plage & T. Laśkiewicz, but were not a success due to poor quality.
The Aviatik (Berg) D.I, was a single-engine, single-seater biplane fighter that was developed and manufactured by the Austro-Hungarian branch of German aircraft company Aviatik. It was also known as Berg D.I or the Berg Fighter, because it was designed by Dipl. Ing. Julius von Berg, and to distinguish it from the D.I fighter built by the parent Aviatik firm in Germany.
Ansaldo was one of Italy's oldest and most important engineering companies, existing for 140 years from 1853 to 1993.
The Ansaldo SVA was a family of Italian reconnaissance biplane aircraft of World War I and the decade after. Originally conceived as a fighter, the SVA was found inadequate for that role. Nevertheless, its impressive speed, range and operational ceiling, with its top speed making it one of the fastest of all Allied combat aircraft in World War I, gave it the right properties to be an excellent reconnaissance aircraft and even light bomber. Production of the aircraft continued well after the war, the final examples were delivered during 1918.
Note: Not to be confused with the Austro-Hungarian Aviatik B.II series 32, 32.7 and 34 which were different aircraft.
Automobil und Aviatik AG was a German aircraft manufacturer during World War I. The company was established at Mülhausen in 1909 and soon became one of the country's leading producers of aircraft. It relocated to Freiburg in 1914 and to Leipzig in 1916 and established a subsidiary in Vienna as Österreichisch-Ungarische Flugzeugfabrik Aviatik. During the war, the company became best known for its reconnaissance aircraft, the B.I and B.II, although the Austro-Hungarian subsidiary also produced a number of its own designs, including fighters such as the D.I.
The Macchi L.3, or later Macchi M.3, was an Italian biplane flying boat developed from the earlier L.2.
The Pomilio PE was a First World War Italian armed reconnaissance biplane designed and built by the Pomilio brothers. It was developed from the earlier Pomilio PC and PD.
The Knoller C.II was a reconnaissance aircraft built in Austria-Hungary during World War I for use by the Austro-Hungarian army.
The Siemens-Schuckert R.I was a bomber aircraft built in Germany during World War I. It was originally ordered as the Siemens-Schuckert G.I prior to the German Inspectorate of Flying Troops adopting the "R" classification for multi-engine aircraft in late 1915. Some sources refer to the aircraft as the Siemens-Schuckert Steffen R.I, including the name of the brothers that designed it.
The Siemens-Schuckert R.III was a prototype bomber aircraft built in Germany during World War I. It was one of six aircraft based on the Siemens-Schuckert R.I that were originally intended to be identical, but which each developed in a different direction and were designated as different aircraft types by the German Inspectorate of Flying Troops. The aircraft's development was impeded by the unreliability of its Maybach HS engines, and when it was eventually accepted for military service, it was only in a training role.
The Siemens-Schuckert R.VI was a bomber aircraft built in Germany during World War I. It was one of six aircraft based on the Siemens-Schuckert R.I, which were originally intended to be identical. Each developed in a different direction and were designated as different aircraft types by the German Inspectorate of Flying Troops.
The Siemens-Schuckert R.VII was a bomber aircraft built in Germany during World War I. It was one of six aircraft based on the Siemens-Schuckert R.I that were originally intended to be identical, but which each developed in a different direction and were designated as different aircraft types by the German Inspectorate of Flying Troops.
Ansaldo Energia is an Italian engineering company.
The Halberstadt B-types of the Halberstädter Flugzeugwerke were two-seat unarmed reconnaissance/training aircraft of the German Air Force in the First World War.