Albatros C.X

Last updated
Albatros C.X
Albatros C.X.jpg
Scale model of an Albatros C.X
RoleReconnaissance aircraft
Manufacturer Albatros Flugzeugwerke
Primary user Luftstreitkräfte
Number built>300

The Albatros C.X was a military reconnaissance aircraft designed and produced by the German aircraft manufacturer Albatros Flugzeugwerke.

Contents

The C.X was essentially an enlarged development of the Albatros C.VII designed to take advantage of the new Mercedes D.IVa engine that became available in 1917. Unlike the C.VII that preceded it in service, the C.X utilised the top wing spar-mounted radiator that had first been tried on the C.V/17. Other important modernisation features included provision for oxygen for the crew and radio equipment. The C.X entered service with the Luftstreitkräfte during 1917 and saw active combat during the latter portion of the First World War.

Design and development

What would become the Albatros C.X was designed fairly promptly after the emergence of the earlier Albatros C.VII. [1] This predecessor aircraft had been hastily developed as a stop-gap measure following the abrupt end of production of the Albatros C.V due to severe engine issues. For the C.X, the company's design team sought to design a more long term successor aircraft that would be capable of greater performance. [1] Nonetheless, the design conformed with many of the established approaches and techniques in use by Albatros at that time; the single most distinctive feature of the C.X was its adoption of the Mercedes D.IVa engine, a relatively powerful engine for the time, being capable of generating up to 260 hp. The airframe also had considerably more generous proportions than the earlier models, despite its adherence to the same core design formula. [2]

The fuselage of the C.X, akin to Albatros' earlier C series aircraft, was composed of plywood with slab-sided construction; it differed by being wider, longer, and deeper than any of its predecessors. [2] This additional volume permitted the installation of new facilities and equipment, such as oxygen breathing apparatus in the forward cockpit, which was occupied by the pilot, while the observer's rear cockpit was furnished with an extensive radio set. Neither the tail surfaces or the undercarriage, which were largely made up of plywood and steel tubing, had any substantial changes from those of the C.V. [2]

The wings, which comprised two wooden box-spars and a two-bay cable-braced layout, were considerably revised, possessing a considerably larger span and area than earlier aircraft. [2] Furthermore, the angular raked wingtips of its predecessors were dispensed with in favour of a more aerodynamic tip profile. Ailerons were installed near to all four wingtips that achieved relatively sensitive lateral control throughout the flight envelope; these on the wing's upper surfaces featured large rectangular inset balance positions. [2] The root of the upper wing accommodated an aerofoil-type radiator to cool the engine; the shutter rate could be easily monitored and changed by the pilot according to the operating conditions. The new wing design was aimed at, in combination with the aircraft's relatively powerful engine, attaining the greatest possible altitude. [2]

During 1917, the C.X entered service with the Luftstreitkräfte , where it was primarily used in both the aerial reconnaissance and artillery spotting roles. [3] By October 1917, roughly 300 aircraft were believed to have been operational. In addition to Albatros, four other manufacturers were sub-contracted to produce the C.X to meet the urgent wartime demands of the Central Powers. [4]


Operators

Flag of the German Empire.svg  German Empire

Specifications (C.X)

Data fromGerman Aircraft of the First World War [3]

General characteristics

Performance

Armament

Related Research Articles

<span class="mw-page-title-main">AEG C.IV</span> Type of aircraft

The AEG C.IV was a two-seat biplane reconnaissance aircraft designed and produced by the German aircraft manufacturer Allgemeine Elektrizitäts-Gesellschaft.

<span class="mw-page-title-main">AEG G.IV</span> Type of aircraft

The AEG G.IV was a biplane bomber aircraft designed and produced by the German aircraft manufacturer Allgemeine Elektrizitäts-Gesellschaft. It saw action during the First World War with the Luftstreitkräfte.

<span class="mw-page-title-main">Albatros C.III</span> Type of aircraft

The Albatros C.III was a twin-seat general-purpose biplane designed and produced by the German aircraft manufacturer Albatros Flugzeugwerke. It was produced in greater numbers than any other C-type aircraft by Albatros as well as being the company's most-produced twin-seat aircraft.

<span class="mw-page-title-main">Albatros C.I</span> 1910s German aircraft

The Albatros C.I,, was a twin-seat general-purpose biplanes designed and produced by the German aircraft manufacturer Albatros Flugzeugwerke. It was the first of the successful C-series aircraft operated by the Luftstreitkräfte.

<span class="mw-page-title-main">Albatros B.II</span> Type of aircraft

The Albatros B.II, was an unarmed two-seat reconnaissance biplane designed and produced by the German aircraft manufacturer Albatros Flugzeugwerke. It was the aircraft that brought Albatros Flugzeugwerke to the world's attention.

<span class="mw-page-title-main">Albatros D.III</span> 1916 fighter aircraft by Albatros

The Albatros D.III was a biplane fighter aircraft used by the Imperial German Army Air Service (Luftstreitkräfte) during World War I. A modified licensed version was built by Oeffag for the Austro-Hungarian Air Service (Luftfahrtruppen). The D.III was flown by many top German aces, including Wilhelm Frankl, Erich Löwenhardt, Manfred von Richthofen, Karl Emil Schäfer, Ernst Udet, and Kurt Wolff, and Austro-Hungarians like Godwin von Brumowski. It was the preeminent fighter during the period of German aerial dominance known as "Bloody April" 1917.

<span class="mw-page-title-main">Albatros D.I</span> Type of aircraft

The Albatros D.I was a German fighter aircraft used during World War I. Although its operational career was short, it was the first of the Albatros D types which equipped the bulk of the German and Austrian fighter squadrons (Jagdstaffeln) for the last two years of the war.

<span class="mw-page-title-main">Albatros D.II</span> Type of aircraft

The Albatros D.II was a German fighter aircraft used during World War I. After a successful combat career in the early Jagdstaffeln, it was gradually superseded by the Albatros D.III.

<span class="mw-page-title-main">Albatros D.V</span> 1917 fighter aircraft by Albatros

The Albatros D.V is a fighter aircraft of the German aircraft manufacturer Albatros Flugzeugwerke. It was the final development of the Albatros D.I family and the last Albatros fighter to see operational service with the Luftstreitkräfte during the First World War.

<span class="mw-page-title-main">Pfalz D.III</span> Type of aircraft

The Pfalz D.III was a fighter aircraft used by the Luftstreitkräfte during the First World War. The D.III was the first major original design from Pfalz Flugzeugwerke. Though generally considered inferior to contemporary Albatros and Fokker fighters, the D.III was widely used by the Jagdstaffeln from late 1917 to mid-1918. It continued to serve as a training aircraft until the end of the war.

<span class="mw-page-title-main">Pfalz D.XII</span> Type of aircraft

The Pfalz D.XII was a German fighter aircraft built by Pfalz Flugzeugwerke. Designed by Rudolph Gehringer as a successor to the Pfalz D.III, the D.XII entered service in significant numbers near the end of the First World War. It was the last Pfalz aircraft to see widespread service. Though the D.XII was an effective fighter aircraft, it was overshadowed by the highly successful Fokker D.VII.

<span class="mw-page-title-main">AGO C.IV</span> German biplane reconnaissance aircraft

The AGO C.IV was a German biplane reconnaissance aircraft designed and produced by the German aircraft manufacturer AGO Flugzeugwerke. It was active with the Luftstreitkräfte during the latter half of the First World War.

<span class="mw-page-title-main">Albatros C.V</span> Type of aircraft

The Albatros C.V was a military reconnaissance aircraft designed and produced by the German aircraft manufacturer Albatros Flugzeugwerke.

<span class="mw-page-title-main">Albatros C.VII</span> Type of aircraft

The Albatros C.VII was a military reconnaissance aircraft designed and produced by the German aircraft manufacturer Albatros Flugzeugwerke. It was a revised and re-engined development of the Albatros C.V, which had proved disappointing in service.

<span class="mw-page-title-main">Albatros C.XII</span> Type of aircraft

The Albatros C.XII was a military reconnaissance aircraft designed and produced by the German aircraft manufacturer Albatros Flugzeugwerke.

<span class="mw-page-title-main">Halberstadt D.II</span> German WWI fighter

The Halberstadt D.II was a biplane fighter aircraft developed and manufactured by German aircraft company Halberstädter Flugzeugwerke.

<span class="mw-page-title-main">Rumpler C.IV</span> Type of aircraft

The Rumpler C.IV was a German single-engine, two-seat reconnaissance biplane. It was a development of C.III with different tail surfaces and using a Mercedes D.IVa engine in place of the C.III's Benz Bz.IV. The Rumpler 6B 2 was a single-seat floatplane fighter variant with a 120 kW (160 hp) Mercedes D.III engine built for the Kaiserliche Marine.

<span class="mw-page-title-main">LFG Roland D.II</span> 1910s German fighter aircraft

The LFG Roland D.II was a German single-seat fighter of World War I. The type was manufactured by Luftfahrzeug Gesellschaft, and also by Pfalz Flugzeugwerke under license.

<span class="mw-page-title-main">Rumpler C.VII</span> Type of aircraft

The Rumpler C.VII was a military reconnaissance aircraft built in Germany during World War I. It was developed from the C.IV and optimised for high-altitude missions that would allow it to operate at heights that would render it immune to interception by enemy fighters. Work on the C.VII took place after a similar attempt to develop the C.III into a high-altitude machine as the C.V failed.

<span class="mw-page-title-main">Rumpler D.I</span> Type of aircraft

The Rumpler D.I was a fighter-reconnaissance aircraft produced in Germany at the end of World War I. It was a conventional single-bay biplane with wings of unequal span braced by I-struts. It featured an open cockpit and a fixed, tailskid undercarriage. The upper wing was fitted with aerodynamically balanced ailerons and fuselage had an oval cross-section.

References

Citations

  1. 1 2 Grey and Thetford 1962, pp. 31-34.
  2. 1 2 3 4 5 6 Grey and Thetford 1962, p. 34.
  3. 1 2 Grey and Thetford 1962, pp. 34-35.
  4. Grey and Thetford 1962, p. 35.

Bibliography

Further reading