BamHI | |||||||||
---|---|---|---|---|---|---|---|---|---|
Identifiers | |||||||||
Symbol | BamHI | ||||||||
Pfam | PF02923 | ||||||||
Pfam clan | CL0236 | ||||||||
InterPro | IPR004194 | ||||||||
SCOP2 | 1bhm / SCOPe / SUPFAM | ||||||||
|
BamHI (pronounced "Bam H one") (from Bacillus amyloliquefaciens ) is a type II restriction endonuclease, having the capacity for recognizing short sequences (6 bp) of DNA and specifically cleaving them at a target site. This exhibit focuses on the structure-function relations of BamHI as described by Newman, et al. (1995). BamHI binds at the recognition sequence 5'-GGATCC-3', and cleaves these sequences just after the 5'-guanine on each strand. This cleavage results in sticky ends which are 4 bp long. In its unbound form, BamHI displays a central b sheet, which resides in between α-helices.
BamHI undergoes a series of unconventional conformational changes upon DNA recognition. This allows the DNA to maintain its normal B-DNA conformation without distorting to facilitate enzyme binding. BamHI is a symmetric dimer. DNA is bound in a large cleft that is formed between dimers; the enzyme binds in a "crossover" manner. Each BamHI subunit makes the majority of its backbone contacts with the phosphates of a DNA half site but base pair contacts are made between each BamHI subunit and nitrogenous bases in the major groove of the opposite DNA half site. The protein binds the bases through either direct hydrogen bonds or water-mediated H-bonds between the protein and every H-bond donor/acceptor group in the major groove. Major groove contacts are formed by atoms residing on the amino-terminus of a parallel 4 helix bundle. This bundle marks the BamHI dimer interface, and it is thought that the dipole moments of the NH2-terminal atoms on this bundle may contribute to electrostatic stabilization.
The BamHI enzyme is capable of making a large number of contacts with DNA. Water-mediated hydrogen bonding, as well as both main-chain and side-chain interactions aid in binding of the BamHI recognition sequence. In the major groove, the majority of enzyme/DNA contacts take place at the amino terminus of the parallel-4-helix bundle, made up of a4 and a6 from each subunit. Although a6 from each subunit does not enter the DNA major groove, its preceding loops interact with the outer ends of the recognition site. Conversely, a4 from each subunit does enter the major groove in the center of the recognition sequence. A total of 18 bonds are formed between the enzyme and DNA across the 6 base pair recognition sequence (12 direct and 6 water mediated bonds). Arg155 and Asp154 located in a spiral ring before a6 are connected with G:C base pairs outside while the middle G:C pairs are connected with Asp154, Arg122, and Asn116 (direct binding). Hydrogen bonding between water and Asn116 results in binding at A:T base pairs inside (water-mediated binding). [1] As discussed above, the L and R subunits bind in a cross over manner, whereby the R-subunit of BamH I contacts the left DNA half-site of the recognition sequence. The binding of each BamH I subunit is precisely the same as its symmetrical partner. The recognition site for BamH I has a palindromic sequence which can be cut in half for ease in showing bonds.
G G A T C C C C T A G G
As of the end of 2010, there were 5 crystal structures of BamH I in the Protein Data Bank
BamHI, like other type II restriction endonucleases, often requires divalent metals as cofactors to catalyze DNA cleavage. [2] Two-metal ion mechanism is one of the possible catalytic mechanisms of BamHI since the BamHI crystal structure has the ability to bind two metal ions at the active site, which is suitable for the classical two-metal ion mechanism to proceed. Two-metal ion mechanism is the use of two metal ions to catalyze the cleavage reaction of restriction enzyme. BamHI has three critical active site residues that are important for metal catalyst. They are known as Asp94, Glu111 and Glu113. These residues are usually acidic. In the presence of a metal ion, the residues are pointed toward the metal ion. In the absence of metal ions, the residues are pointed outward. The two metal ions (A and B) are 4.1 apart from each other in the active site and are in-line with these residues. [3] In general, when the two metal ions (A and B) are bonded to the active site, they help stabilize a cluster distribution of negative charges localized at the active site created by the leaving of an oxygen atom during the transition state. First, a water molecule will be activated by metal ion A at the active site. This water molecule will act as the attacking molecule attacking the BamHI-DNA complex and thus making the complex negative. Later, another water will bound to metal ion B and donate a proton to the leaving group of complex, stabilizing the build-up of negative charge on the leaving oxygen atom. [4]
The function of Ca2+ in the active site of BamHI is known. It is an inhibitor of DNA cleavage, converting BamHI into the pre-reactive state. This revealed the water molecular is the attacking molecule. It donates a proton to the leaving group that is bounded to Ca2+ forming a 90o O-P-O bond angles. If Glu 113 is replaced by lysine, the cleavage is lost since Glu 113 accepts the proton from the attacking water molecule. [3]
Because of its ability to recognize specific DNA sequence and cleave by a nuclease, BamHI carries various importances in understanding Type II restriction endonuclease, cloning DNA, and possibly treating certain DNA mutation-derived diseases through genetic therapy. [1] NARP and MILS syndromes, for example, are mitochondrial diseases that can be caused by mutations in the mitochondrial DNA. Mitochondria can recover its functions after the excision of the mutant sequence through restriction endonuclease. [5]
A restriction enzyme, restriction endonuclease, REase, ENase orrestrictase is an enzyme that cleaves DNA into fragments at or near specific recognition sites within molecules known as restriction sites. Restriction enzymes are one class of the broader endonuclease group of enzymes. Restriction enzymes are commonly classified into five types, which differ in their structure and whether they cut their DNA substrate at their recognition site, or if the recognition and cleavage sites are separate from one another. To cut DNA, all restriction enzymes make two incisions, once through each sugar-phosphate backbone of the DNA double helix.
In biology and biochemistry, the active site is the region of an enzyme where substrate molecules bind and undergo a chemical reaction. The active site consists of amino acid residues that form temporary bonds with the substrate, the binding site, and residues that catalyse a reaction of that substrate, the catalytic site. Although the active site occupies only ~10–20% of the volume of an enzyme, it is the most important part as it directly catalyzes the chemical reaction. It usually consists of three to four amino acids, while other amino acids within the protein are required to maintain the tertiary structure of the enzymes.
In biochemistry, a nuclease is an enzyme capable of cleaving the phosphodiester bonds between nucleotides of nucleic acids. Nucleases variously effect single and double stranded breaks in their target molecules. In living organisms, they are essential machinery for many aspects of DNA repair. Defects in certain nucleases can cause genetic instability or immunodeficiency. Nucleases are also extensively used in molecular cloning.
Ribonuclease H is a family of non-sequence-specific endonuclease enzymes that catalyze the cleavage of RNA in an RNA/DNA substrate via a hydrolytic mechanism. Members of the RNase H family can be found in nearly all organisms, from bacteria to archaea to eukaryotes.
DnaG is a bacterial DNA primase and is encoded by the dnaG gene. The enzyme DnaG, and any other DNA primase, synthesizes short strands of RNA known as oligonucleotides during DNA replication. These oligonucleotides are known as primers because they act as a starting point for DNA synthesis. DnaG catalyzes the synthesis of oligonucleotides that are 10 to 60 nucleotides long, however most of the oligonucleotides synthesized are 11 nucleotides. These RNA oligonucleotides serve as primers, or starting points, for DNA synthesis by bacterial DNA polymerase III. DnaG is important in bacterial DNA replication because DNA polymerase cannot initiate the synthesis of a DNA strand, but can only add nucleotides to a preexisting strand. DnaG synthesizes a single RNA primer at the origin of replication. This primer serves to prime leading strand DNA synthesis. For the other parental strand, the lagging strand, DnaG synthesizes an RNA primer every few kilobases (kb). These primers serve as substrates for the synthesis of Okazaki fragments.
In molecular biology, endonucleases are enzymes that cleave the phosphodiester bond within a polynucleotide chain. Some, such as deoxyribonuclease I, cut DNA relatively nonspecifically, while many, typically called restriction endonucleases or restriction enzymes, cleave only at very specific nucleotide sequences. Endonucleases differ from exonucleases, which cleave the ends of recognition sequences instead of the middle (endo) portion. Some enzymes known as "exo-endonucleases", however, are not limited to either nuclease function, displaying qualities that are both endo- and exo-like. Evidence suggests that endonuclease activity experiences a lag compared to exonuclease activity.
A DNA-binding domain (DBD) is an independently folded protein domain that contains at least one structural motif that recognizes double- or single-stranded DNA. A DBD can recognize a specific DNA sequence or have a general affinity to DNA. Some DNA-binding domains may also include nucleic acids in their folded structure.
HindIII (pronounced "Hin D Three") is a type II site-specific deoxyribonuclease restriction enzyme isolated from Haemophilus influenzae that cleaves the DNA palindromic sequence AAGCTT in the presence of the cofactor Mg2+ via hydrolysis.
EcoRV is a type II restriction endonuclease isolated from certain strains of Escherichia coli. It has the alternative name Eco32I.
The homing endonucleases are a collection of endonucleases encoded either as freestanding genes within introns, as fusions with host proteins, or as self-splicing inteins. They catalyze the hydrolysis of genomic DNA within the cells that synthesize them, but do so at very few, or even singular, locations. Repair of the hydrolyzed DNA by the host cell frequently results in the gene encoding the homing endonuclease having been copied into the cleavage site, hence the term 'homing' to describe the movement of these genes. Homing endonucleases can thereby transmit their genes horizontally within a host population, increasing their allele frequency at greater than Mendelian rates.
Deoxyribonuclease IV (phage-T4-induced) is catalyzes the degradation nucleotides in DsDNA by attacking the 5'-terminal end.
BglII is a type II restriction endonuclease isolated from certain strains of Bacillus globigii.
PstI is a type II restriction endonuclease isolated from the Gram negative species, Providencia stuartii.
Nucleic acid tertiary structure is the three-dimensional shape of a nucleic acid polymer. RNA and DNA molecules are capable of diverse functions ranging from molecular recognition to catalysis. Such functions require a precise three-dimensional structure. While such structures are diverse and seemingly complex, they are composed of recurring, easily recognizable tertiary structural motifs that serve as molecular building blocks. Some of the most common motifs for RNA and DNA tertiary structure are described below, but this information is based on a limited number of solved structures. Many more tertiary structural motifs will be revealed as new RNA and DNA molecules are structurally characterized.
Ribonuclease E is a bacterial ribonuclease that participates in the processing of ribosomal RNA and the chemical degradation of bulk cellular RNA.
DNA-deoxyinosine glycosylase is an enzyme with systematic name DNA-deoxyinosine deoxyribohydrolase. This enzyme is involved in DNA damage repair and targets hypoxanthine bases.
Lysine carboxypeptidase is an enzyme. This enzyme catalyses the following chemical reaction:
EcoRI is a restriction endonuclease enzyme isolated from species E. coli. It is a restriction enzyme that cleaves DNA double helices into fragments at specific sites, and is also a part of the restriction modification system. The Eco part of the enzyme's name originates from the species from which it was isolated - "E" denotes generic name which is "Escherichia" and "co" denotes species name, "coli" - while the R represents the particular strain, in this case RY13, and the I denotes that it was the first enzyme isolated from this strain.