Bombardier RegioSwinger

Last updated
RegioSwinger
612 078 Mohren.jpg
A RegioSwinger in use as Allgäu-Franken-Express in Treuchtlingen
HZ 7123 series DMU (06).JPG
A Croatian RegioSwinger in Rijeka, Croatia
Manufacturer Adtranz, Hennigsdorf factory
Bombardier Transportation
Constructed1998-Present
Number built192(8 in HŽ,184 in DB)
Specifications
Train length51,750 mm (169 ft 9 in)
Maximum speed160 km/h (99 mph)
Weight116 t (114 long tons; 128 short tons)
Prime mover(s) Cummins QSK-19,
at each end
Engine type Diesel
Power output2 x 560 kW (751 hp)
Transmission Hydraulic
UIC classification 2'B'+B'2'
Coupling system Scharfenberg coupler
Multiple working Up to 4 sets
Track gauge 1,435 mm (4 ft 8+12 in) standard gauge

The RegioSwinger is a tilting diesel multiple unit (DMU) passenger train used for fast regional traffic on unelectrified lines.

Contents

Development and service

The RegioSwinger was first manufactured by Adtranz in Hennigsdorf, before it became part of Bombardier Transportation in 2001. The train is in use in Germany with Deutsche Bahn as class 612.

The series was introduced to Croatia with Croatian Railways as HŽ 7123 or InterCity Nagibni (ICN) in 2004. (8 units in total). [1] The public shortened that name, so it caught the nickname nagibni (swinger) in Croatia, and became known also by that short name, due to commercials. These trains are normally deployed on the mountainous route between the two largest Croatian cities, route Zagreb - Split, but are also sometimes on other routes in the country (depending on need and availability). In the case of the Zagreb-Split route, this offers passengers a much more comfortable and time-saving journey with regard to previous trains whose journey took 8 hours, whereas the tilting trains offer shorter riding time and are more quiet and better equipped as well.

However, the safety of the tilting trains and their possible technical incompatibility with the conditions of the Croatian railroads are disputed after the 2009 Rudine train derailment, an incident that occurred on 24 July of that year, in which six passengers were killed and 55 were injured in the crash.[1] Approximately 3 years before this fatal derailment, on 24 November 2006, there was another accident in which the train's engineer was killed; the tilting train crashed into a lorry at a railroad crossing that had no ramp or warning lights.[2] Out of eight trainsets that were introduced in 2004, two are therefore out of service. The tilting train services may therefore have to be reduced as there are no longer enough train-sets to serve all scheduled ICN trains and destinations.

Class 612's predecessor was class 611, which due to heavy problems with the tilting system and the chassis was largely considered a failure. Even though class 612 sticks to the principle of an electric tilting system (Neicontrol-E), it was newly engineered from the beginning.

The first units were delivered in 1998 and worked reliably until 2004, when cracks were detected in a number of wheel sets. For safety reasons, the tilting system was disabled and subsequently the maximum speed on tilting lines was reduced, causing a massive disorder in the schedules. As before with class 611, wheels and axles had to be replaced. Starting in 2005, class 612 was equipped with hardened molybdenum axles. Today class 612 is back to tilting operation and forms the backbone of DB's fast regional service on unelectrified lines.

After ICE TD class 605 was grounded due to a fracture of an axle in one unit, it was replaced by class 612 on the Dresden-Munich line 2003, as replacement by anything other than a tilting DMU would have meant an extension of travel time. Even though class 612 was not constructed for ICE-type travelling comfort, 16 units were repainted in the ICE paint scheme and renumbered as class 612.4. Ironically, only one year later the same problem forced DB to disable the tilting system on the replacement also.

Technical information

Passenger and driver compartments are fully air-conditioned. Class 612 units comprise two motorised coaches, each with a 560 kW (751 hp) Cummins engine (type QSK-19). The power is transferred hydraulically. Up to four units can be connected by the Scharfenberg coupler, with the on-board computers automatically choosing the train configuration.

Besides pneumatic brakes and a hydraulic braking system, class 612 is also equipped with an electro-magnetic brake. The maximum tilt is 8°.

Accidents

On July 24, 2009, a train derailed near Rudine, Croatia, with 119 passengers aboard, killing 6 and injuring 55, on the Zagreb-Split line. [2] According to Croatian news reports, the cause of the derailment was slippery fire retardant that was just sprayed on a steep downhill section of the track, a normal practice in extreme summer heat but executed improperly using a new chemical. With brakes ineffective, the train gained a speed higher than the track configuration could handle and derailed. [3] [4] [5]

Croatian news media report that this section of the track was reconstructed in 2005 and that the particular train passed inspection just two days prior to the accident, but the accident brought back the debate on whether these trains are appropriate for local conditions. Investigation continues, with questionable application of fire retardant (recently changed to "aqueous based resin liquid penetrate" TG-300 from a new supplier) emerging as the most likely cause of the accident. [6]

Comfort

Related Research Articles

<span class="mw-page-title-main">Diesel multiple unit</span> Diesel-powered railcar designed to be used in formations of 2 or more cars

A diesel multiple unit or DMU is a multiple-unit train powered by on-board diesel engines. A DMU requires no separate locomotive, as the engines are incorporated into one or more of the carriages. Diesel-powered single-unit railcars are also generally classed as DMUs. Diesel-powered units may be further classified by their transmission type: diesel–mechanical DMMU, diesel–hydraulic DHMU, or diesel–electric DEMU.

<span class="mw-page-title-main">Tilting train</span> Type of train that can tilt in curves

A tilting train is a train that has a mechanism enabling increased speed on regular rail tracks. As a train rounds a curve at speed, objects inside the train experience centrifugal force. This can cause packages to slide about or seated passengers to feel squashed by the outboard armrest, and standing passengers to lose their balance, or in such excessive speeds, could even cause the train to derail. Tilting trains are designed to counteract this by tilting the carriages towards the inside of the curve, thus compensating for the g-force. The train may be constructed such that inertial forces cause the tilting, or it may have a computer-controlled powered mechanism.

<span class="mw-page-title-main">Intercity Express</span> German state-owned high-speed rail system

Intercity Express is a high-speed rail system in Germany. It also serves destinations in Austria, France, Belgium, Switzerland and the Netherlands as part of cross-border services. It is the flagship of the German state railway, Deutsche Bahn. ICE fares are fixed for station-to-station connections, on the grounds that the trains have a higher level of comfort. Travelling at speeds up to 320 km/h (200 mph), they are aimed at business travellers and long-distance commuters and marketed by Deutsche Bahn as an alternative to flights.

ICN may refer to:

<span class="mw-page-title-main">InterRegio</span> Type of European interregional train service

The InterRegio is a train service seen in some European countries. Mostly they are trains that run "from region to region", as best described by Swiss Federal Railways.

<span class="mw-page-title-main">British Rail Class 222</span> Diesel multiple-unit high-speed passenger train

The British Rail Class 222 Meridian is a diesel-electric multiple-unit high-speed passenger train capable of 125 mph (200 km/h). Twenty-seven sets were built by Bombardier Transportation in Bruges, Belgium.

<span class="mw-page-title-main">British Rail Class 142</span> Class of 96 British 2-car railbuses

The British Rail Class 142 Pacer are diesel multiple units built for British Rail (BR) from 1985 to 1987. The class were built with a high level of commonality with the widely-used Leyland National bus. They are part of the Pacer family of railbuses. The last set was withdrawn from service in 2020.

<span class="mw-page-title-main">British Rail Class 318</span> British electric multiple-unit passenger trainset

The British Rail Class 318 is an electric multiple unit (EMU) passenger train which operates in west central Scotland. The units were introduced on 29 September 1986 as part of the electrification of the Ayrshire Coast Line between Glasgow Central and Ayr/Ardrossan with alternating current (AC) overhead lines. Their use was extended to Largs in January 1987. They were also used on the Inverclyde Line in small numbers. The trains currently operate Argyle Line, Cathcart Circle Line, North Clyde Line, Whifflet Line and Inverclyde Line services. Following the withdrawal of the Class 314 fleet in 2019, these units are the oldest working EMUs in Scotland, having been in revenue-earning service for more than 37 years.

<span class="mw-page-title-main">Chester General rail crash</span>

The Chester General rail crash occurred on 8 May 1972 at Chester, northwest England, resulting in extensive fire damage, but no casualties. It was caused by brake failure through human error.

<span class="mw-page-title-main">NSB Class 73</span> Class of 22 Norwegian electric multiple units

NSB Class 73 is a class of 22 electric multiple units built by Adtranz for the Norwegian State Railways. The four-car trains were modifications of Class 71, which was again based on the Swedish X2. The A-series consists of 16 intercity trains; they were delivered in 1999 and 2000 and are used on the Bergen, Dovre and Sørland Lines. The intercity service was branded as Signatur until 2003. The B-series consists of six regional trains delivered in 2002 and used on the Østfold Line. The regional trains were originally part of the Agenda concept. The trains have a power output of 2,646 kilowatts (3,548 hp) and a maximum speed of 210 km/h (130 mph). They have an overall length of 108 meters (354 ft) and have a capacity for 208 seated passengers in the A-series and 250 in the B-series. The trains have a tilting mechanism allowing for faster travel through curves.

<span class="mw-page-title-main">DBAG Class 612</span>

The DBAG Class 612 is a two car, tilting, diesel multiple unit operated by the Deutsche Bahn for fast regional rail services on unelectrified lines.

This is a list of past and present rolling stock owned and operated by Croatian Railways, consisting of diesel locomotives, electric locomotives, diesel multiple units, electric multiple units and railroad cars. When the company began operation in 1991, it was with a collection of equipment inherited from „ŽTP Zagreb“ – a Croatian division of Yugoslav Railways. Much of this equipment was later refurbished/modernized and remains in use today. Over the years, Croatian Railways has supplemented this initial fleet with new orders and with new acquisitions of secondhand equipment from other operators.

<span class="mw-page-title-main">ICE TD</span> Diesel multiple unit train type

The DBAG Class 605, commonly known as the ICE TD is a high-speed diesel multiple unit (DMU) train, formerly in service with Deutsche Bahn and DSB.

Railway companies in Europe assign their trains to different categories or train types depending on their role. Passenger trains may be broadly split into long-distance and local trains; the latter having average journey times of under an hour and a range of less than 50 kilometres. Goods trains have their own train types. The names of these train types have changed continually over the course of time.

<span class="mw-page-title-main">Rudine derailment</span> 2009 train derailment in Croatia

The Rudine derailment was a train derailment that happened on 24 July 2009 at 10:08 GMT near the village of Rudine in southern Croatia, on the Zagreb-Split railway line. The derailment site is located on the slopes of Kozjak. The accident caused the deaths of 6 people, and 55 were injured.

<span class="mw-page-title-main">DB Class 611</span>

The DBAG Class 611 is a two car, tilting, diesel multiple unit operated by Deutsche Bahn for fast regional rail services on unelectrified lines.

<span class="mw-page-title-main">M604 railway (Croatia)</span>

Lika railway, officially a part of M604 railway, is a 220 km-long single-track, un-electrified railroad connecting Zagreb-Rijeka line with Knin railway hub. It mostly runs through Lika region. M604 railway is the only operating railway link between the continental Croatia and Dalmatia, especially its harbors of Split, Zadar, and Šibenik (M607). Lika railway, finished in 1925, is a key part of this link. The M604 line itself runs from Oštarije/Ogulin on Zagreb-Rijeka railway past Knin, to Split terminus. Its total length is 320 km. Historically, much older Knin-Split section of M604 line used to be known as Dalmatian railway.

<span class="mw-page-title-main">Milavče train crash</span> Train collision in the Czech Republic

On 4 August 2021, two passenger trains collided at Milavče in the Czech Republic. Three people were killed and 67 were injured.

The TSD09 diesel multiple unit is a tilting train developed by Tangshan Locomotive in 2003 and fitted with Cummins diesel engines, Voith hydraulic transmission and Extel Systems Wedel tilting mechanisms. It was built for Sanmao Railway, but due to strategic reasons within the Ministry of Railways, the set never operated commercially and has been permanently stored at Tangshan Locomotive.

References

  1. nov-ost.info - Erste "Regioswinger" für Kroatien
  2. Derailment location (estimated)
  3. Jeziva željeznička nesreća
  4. Kriv je premaz pruge - slijede prijave
  5. Vlak smrti: Glavni predmet istrage Ivan Medak i Drago Rogulja
  6. TG-300 Outdoor Applications