Border Railways Act 1922

Last updated

The 1922 Border Railways Acts, were Acts passed by the Parliaments of both Victoria and New South Wales, which authorised the construction of cross border railways in the Riverina region of Australia. Despite being located in New South Wales, the region was closer economically to Victoria and its railway network, operated by Victorian Railways. Another complication was that Victorian Railways used the 1,600 mm (5 ft 3 in) broad gauge, while the New South Wales Government Railways used 1,435 mm (4 ft 8+12 in) standard gauge.

Contents

Background

The first 1,600 mm (5 ft 3 in) line to be built from Victoria into New South Wales was the Deniliquin - Moama line. Permission was granted to the private Deniliquin and Moama Railway Company by the New South Wales Government in 1874 to construct a 72 kilometres (45 mi) long line from Moama on the Murray River north to Deniliquin, connecting with the Victorian railway system at the Murray Bridge, near Echuca. [1] Opened in 1876, it was later purchased by Victorian Railways.

In 1904, the Victorian Parliament authorised an extension of the Goulburn Valley line 13.2 kilometres (8.2 mi) north from Strathmerton station, to the south bank of the Murray River across from Tocumwal. The line was opened in February 1905, [2] and in April 1906, the two state Premiers (Thomas Bent and Joseph Carruthers) signed an agreement for a final 3.3 kilometres (2.1 mi) extension, into the town itself. The existing road bridge was strengthened and became the responsibility of Victoria, with both states sharing construction costs for the line. Opened in 1908, the profit (or loss) of operating the line would be Victoria's. [3] In the station became a break-of-gauge in 1914 with extension of the NSWGR Tocumwal line. [4]

Impact of the Act

As a result of the predicament of border towns, the Border Railways Commission (made up of representatives of both states) recommended in 1917 in favour of the construction of four additional lines into New South Wales. The most important line was to run from Swan Hill to Balranald. The culmination was the 1922 Border Railways Acts of both states, with the first outcome being that Victorian Railways took over the Deniliquin and Moama Railway Company in 1923 at a cost of £165,000. The actual construction differed from that initially proposed.

Schedule 1 to the Border Railways Act 1922 (Victorian Act No. 3194) [13] also provided that two engineers, one of whom shall be appointed by the Government of New South Wales and one by the Victorian Government, shall recommend the sites of two bridges to be constructed between a point 3 miles upstream from Mildura Wharf and downstream to a point near the Wentworth Township. The bridges were to provide for both road and rail traffic. Suitable bridges were built at both Mildura and Yelta, but no railway lines were built.

Related Research Articles

<span class="mw-page-title-main">Tocumwal</span> Town in New South Wales, Australia

Tocumwal is a town in the southern Riverina region of New South Wales, Australia, in the Berrigan Shire local government area, near the Victorian border. The town is situated on the banks of the Murray River, 270 kilometres (170 mi) north of the city of Melbourne. The Newell Highway and Murray Valley Highway join at the Murray River, and form part of the main road route National Highway A39 between Brisbane and Melbourne. At the 2016 census, Tocumwal had a population of 2,682. The winner of several 'Tidy Town' awards, Tocumwal is affectionately known as 'The Jewel in the Crown That Is The Riverina District'.

<span class="mw-page-title-main">Riverina</span> Region in New South Wales, Australia

The Riverina is an agricultural region of south-western New South Wales, Australia. The Riverina is distinguished from other Australian regions by the combination of flat plains, warm to hot climate and an ample supply of water for irrigation. This combination has allowed the Riverina to develop into one of the most productive and agriculturally diverse areas of Australia.

<span class="mw-page-title-main">Rail transport in New South Wales</span> Railway network in New South Wales, Australia

The Australian state of New South Wales has an extensive network of railways, which were integral to the growth and development of the state. The vast majority of railway lines were government built and operated, but there were also several private railways, some of which operate to this day.

<span class="mw-page-title-main">Robinvale</span> Town in Victoria, Australia

Robinvale is a town on the south bank of the Murray River in north western Victoria, Australia. It is connected by a bridge to Euston on the other side of the river in New South Wales. At the 2016 census, Robinvale had a population of 3,313, however a population study conducted by the Rural City of Swan Hill that was undertaken in 2019 identified Robinvale had an estimated population of between 7,000 in November and 8,800 in March each year.

<span class="mw-page-title-main">Murray Valley Highway</span> Highway in Victoria and New South Wales

Murray Valley Highway is a 663-kilometre (412 mi) state highway located in Victoria and New South Wales, Australia. The popular tourist route mostly follows the southern bank of the Murray River and effectively acts as the northernmost highway in Victoria. For all but the western end's last three kilometres, the highway is allocated route B400.

<span class="mw-page-title-main">Riverina Highway</span>

Riverina Highway is a 220-kilometre (140 mi)-long state highway located in the Riverina region of New South Wales, Australia. The road was constructed over several decades with final asphalt concrete sealing completed during the 1960s.

<span class="mw-page-title-main">Deniliquin and Moama Railway Company</span>

The Deniliquin and Moama Railway Company was a railway company formed by a syndicate of Victorian capitalists to construct a railway from Moama to Deniliquin in New South Wales, Australia.

The North East railway line is a railway line in Victoria, Australia. The line runs from Albury railway station in the border settlement of Albury–Wodonga to Southern Cross railway station on the western edge of the Melbourne central business district, serving the cities of Wangaratta and Seymour, and smaller towns in northeastern Victoria. The line is owned by VicTrack, but leased to, and maintained by, the Australian Rail Track Corporation, and forms part of the Sydney–Melbourne rail corridor.

The Tocumwal railway line is a 1,600 mm gauge railway line in Victoria, Australia. The line runs between the border town of Tocumwal in New South Wales to Southern Cross, Melbourne. The line is utilised by various passenger and freight trains serving the northern suburbs of Melbourne and northern regions of Victoria.

<span class="mw-page-title-main">Piangil railway line</span> Partially closed railway line in Victoria, Australia

The Piangil railway line is a 5 ft 3 in gauge (1600 mm) railway line in north-western Victoria, Australia. It branches off the Deniliquin line just north of Bendigo, and runs in a north-westerly direction through Pyramid Hill and Kerang to the border town of Swan Hill, then roughly parallels the New South Wales border to Piangil and Yungera. The line is now open only as far as Piangil, and passenger services only operate to Swan Hill.

<span class="mw-page-title-main">Echuca railway station</span> Railway station in Victoria, Australia

Echuca railway station is located on the Deniliquin line in Victoria, Australia. It serves the town of Echuca, and opened on 19 September 1864.

The Deniliquin railway line is a broad-gauge railway line serving northwestern Victoria, Australia. The line runs from the border settlement of Deniliquin into Bendigo, before turning south-southeast towards Melbourne, terminating in Docklands near the central business district. It is a major trunk line both for passenger and freight trains, with many railway lines branching off from it.

<span class="mw-page-title-main">Victorian Railways B class (diesel)</span> Class of 26 Australian diesel-electric locomotives

The B class are a class of diesel locomotives built by Clyde Engineering, Granville for the Victorian Railways in 1952–1953. Ordered and operated by the Victorian Railways, they initiated the dieselisation of the system and saw use on both passenger and freight services, with many remaining in service today, both in preserved and revenue service. Some were rebuilt as the V/Line A class, while others have been scrapped.

<span class="mw-page-title-main">Robinvale railway line</span>

The Robinvale railway line is a freight only country railway line in north-western Victoria, Australia. The line branches from the Mildura line at Dunolly, and at Inglewood the Eaglehawk – Inglewood line connects with the Piangil line outside Bendigo. The parallel Kulwin line junctions from the Robinvale line at Korong Vale then continues northward.

<span class="mw-page-title-main">Oaklands railway line, Victoria</span> Railway line in Australia

The Oaklands railway line is a freight-only railway line in north-eastern Victoria, Australia. The line branches from the main North East railway at Benalla station and runs across the Victoria-New South Wales border to the town of Oaklands, New South Wales.

<span class="mw-page-title-main">Tocumwal railway station</span> Historic site in New South Wales, Australia

Tocumwal railway station is a heritage-listed closed railway station in the town of Tocumwal, New South Wales, Australia. It was once the break-of-gauge between the broad gauge Victorian Railways Tocumwal line from the south, and the standard gauge New South Wales Government Railways Tocumwal line from the north. However, only the line from Victoria is still open.

The Balranald railway line was a Victorian Railways broad gauge line that branched from Barnes on the Deniliquin railway line and ran to Balranald. The building of the line was sanctioned under the Border Railways Act 1922.

<span class="mw-page-title-main">Pinnaroo railway line, South Australia</span>

The Pinnaroo railway line ran east from the Adelaide to Melbourne line at Tailem Bend to Pinnaroo near the South Australia / Victoria state border. The route continues into Victoria via the Victorian Railways line to Ouyen where it joined the Mildura line.

The Cobram railway line was a short branch of the Tocumwal line in the north-eastern region of the Victorian railway network.

References

  1. Australian Bureau of Statistics. "Private Railways". Year Book Australia, 1921. www.abs.gov.au. Retrieved 20 July 2008.
  2. 1 2 3 Sid Brown (March 1990). "Tracks Across the State". Newsrail. Australian Railway Historical Society (Victorian Division). pp. 71–76.
  3. 1 2 Lee, Robert (2007). The Railways of Victoria 1854-2004. Melbourne University Publishing Ltd. p. 133. ISBN   978-0-522-85134-2.
  4. "Tocumwal Branch". NSWrail.net. www.nswrail.net. Retrieved 20 July 2008.
  5. 1 2 Lee, Robert (2007). The Railways of Victoria 1854-2004. Melbourne University Publishing Ltd. p. 134. ISBN   978-0-522-85134-2.
  6. 1 2 1928 and 1929 Railway Construction Branch Reports, V/Line technical Library, late 1980s.
  7. Railway Construction Branch Reports - former V/Line Technical Library - late 1980s)
  8. K.V. Scott photographic collection
  9. Railway Historian Trevor Penn
  10. Mort Clark - A.R.H.S. Bulletin Article
  11. Photographic record from A.R.H.S. Bulletin April 1999 and Wurr photographic collection on the line
  12. V/Line technical Library, Transport House, Railway Construction Branch Reports read during late 1980s
  13. Victorian Parliamentary Offices