The Brunswick and Western Railroad (known earlier as the Brunswick and Florida Railroad and the Brunswick and Albany Railroad) is a historic railroad in southern Georgia that at its greatest extent ran from Brunswick near the coast to Albany. Segments of the line still exist today. The Brunswick and Florida Railroad ran from Brunswick west to Glenmore (located about 10 miles west of present-day Waycross), where it would connect with the Atlantic and Gulf Railroad.
The former Brunswick and Western Railroad in Hoboken, Georgia as seen in 2013
In the 1830s, a railroad route from North Florida through South Georgia and onwards to the Atlantic coast was the goal of several different competing companies. The route was desired due to the growth of cotton production in the area and the lack of navigable rivers through the area. The head of navigation on the Flint River was at Albany, Georgia, the center of cotton trade in the region; however, the Flint River was relatively small and Apalachicola Bay lacked a decent harbor. There were two major ports on Georgia's Atlantic coast at the time: Brunswick and Savannah.
The Brunswick and Florida Railroad received its charter from the Georgia General Assembly on December 22, 1835. Their charter allowed them to select a route between Brunswick, Georgia and the Florida line, and forbade another route from existing with 20 miles (32km) of their own.
Before any rails were laid by the company, they were already planning on branch routes. In November 1836, a bill was introduced to the Georgia legislature to authorize the Brunswick and Florida Railroad to construct a branch to the Flint or Chattahoochee Rivers.[1] That bill became law on December 24, 1836. By July 1837, an initial survey of the route has been completed. The end of the route was going to be near the confluence of the Flint and Chattahoochee Rivers on the Florida-Georgia line.[2]
The company spent the late 1830s attempting to raise funding for the railroad. In the summer of 1838, Thomas Butler King, then the president of the company, toured South Georgia and was able to raise $80,000 in stock subscriptions from the citizens of Lowndes County, Georgia and $220,000 from the citizens of Thomas County, Georgia.[3]
No progress was made for over a decade, but by 1852 efforts were once again being made to get the railroad started. As part of the renewed effort, a line from Troupville, Georgia to Albany, Georgia was being planned.[4] Construction was finally set to start on November 1, 1852.[5] By June 1853, 12 miles of the route had been graded with 5.5 miles of rail laid.[6]
Brunswick versus Savannah
In February 1854, the Savannah and Albany Railroad Company rebranded themselves the Savannah, Albany, and Gulf Railroad through a new charter from the state and began plans for a Florida route, a route that was forbidden by the Brunswick and Florida Railroad's charter. By April 1854, citizens in South Georgia were hoping that the two companies would avoid competition with one another and construct a "main trunk" line together.[7] In February 1855, Col. Charles L. Schlatter arrived in Georgia to take over the role as chief engineer for the construction of the railroad.[8] Col. Schlatter was an accomplished and eminent civil engineer, who in early life was chief engineer of the state of Pennsylvania and of the Ogdensburg Railroad of New York. Col. Schlatter is the namesake of Schlatterville, Georgia which is located just west of Hoboken.[9] The directors' report from May 1855, detailed the conditions of the company. 20 miles of the route had then been graded and 5 miles of rail laid. The company owned one locomotive and six freight cars.[10]
In November 1855, a bill was introduced to the Georgia General Assembly by Alexander Lawton to give the Savannah, Albany, and Gulf's southern branch line the right to cross the line of the Brunswick and Florida, but it did not pass.[11] In early 1856, a compromise was reached between the two competing companies was passed by the Georgia General Assembly. They would both build to a certain point in south Georgia, and then a main trunk line was to be built. The company chartered to build that line was incorporated as the Atlantic and Gulf Railroad Company in February 1856. Construction of the Atlantic and Gulf was forbidden until the junction of the Brunswick and Florida Railroad and the Savannah, Albany, and Gulf Railroad. At that time the Brunswick and Florida had only completed the first 32 miles (51km) of its line.
Members of the Brunswick and Florida Railroad Company also met in December 1856 to discuss the changes to the charter made by the Georgia legislature. They recommended that their company refuse to junction with or surrender charter privileges to the Atlantic and Gulf Company unless it was beneficial to the development of the city of Brunswick. They also wanted the junction, if it was to take place, to be located east of the Satilla River.[12] The Brunswick and Florida Railroad Company was still busy in April 1857 trying to get the citizen of Lowndes and Berrien counties on their side and claimed that $40,000 in stock had been raised in Lowndes County alone.[13]
By October 1857, the route had been graded to Big Creek in modern Brantley County, but the company lacked the iron to complete the line to that point.[14] By November 1858, additional rails were purchased to complete the railroad to its junction with the Atlantic and Gulf and extension of the road to Albany was being called for.[15]
A route from Albany to railroad's junction with the Atlantic and Gulf was surveyed in April 1859 by chief engineer Charles L. Schlatter.[16] The company's intention to build a route to Albany was announced a few weeks later.[17] Grading of the route from the junction with the Atlantic and Gulf to Waresboro, Georgia began in August 1860.[18]
Civil War
Construction of the railroad continued during the American Civil War. The route from Brunswick to Teabeauville was complete by late August 1861.[19] By that point in time the Atlantic and Gulf Railroad had already been completed to Thomasville, Georgia. The Brunswick and Florida original route called for it to go through Thomasville on its way to Florida. In September 1861, Charles Lyon Schlatter Sr was elected president of the railroad company. At the same meeting, it was decided to change the name of the railroad to the Brunswick and Albany Railroad. The name change was made official by the legislature during that December.[20]
On June 10, 1863, two Union gunboats went up the Turtle River and attempted to burn the Brunswick and Albany Railroad's trestle of Buffalo Swamp. The fire was put out by some carpenters after the gunboats left.[21]
The name change was reaffirmed in 1866 by the new government after the end of the Civil War.[23] After the war in 1869, the State of Georgia provided about $6million in bonds for the railroad to rebuild.[24]
Rebuilding of the railroad commenced in August 1869, with track being laid all the way to Waynesville, Georgia by 24 November 1869. On January 25, 1870, the rails were complete to the east bank of the Satilla River, and by March 10, 1870, the track was once again complete to Big Creek at the 47.5 mile post.[25] The westernmost segment of the original line from Schlatterville to Glenmore was never rebuilt, instead, the line from Schlatterville to Albany became the only online line.
In May 1870, rails had once again been laid up the junction with the Atlantic and Gulf Railroad at Tebeauville.[26]
By January 1871, the construction crew had laid rails all the way to Alapaha River near modern Alapaha, Georgia.[27] Before the road had even reached Albany, the company was thinking of extending the route to Eufaula, Alabama. Surveys for the route west from Albany began in March 1871.[28] Track laying reached the Little River near what would soon become Tifton in April of that same year.[29] Only 30 miles were left between Albany and the completed line by July 1871.[30] Work on grading the line from Albany to Cuthbert and on to Eufaula was set to begin in June 1871, when many plantation owners along the line began demanding damage payments for allowing the railroad a right of way through their land. The railroad refused to pay any damages to the owners and permanently suspended construction of the line west of Cuthbert.[31] The first train reached Albany from Brunswick on October 2, 1871.[32]
Shortly after the railroad's completion to Albany, the railroad fail upon hard financial times and was unable to pay the contractors and workers involved with the construction of the railroad. This led to the governor of Georgia intervening due to state bonds that had been used to fund the construction of the railroad.[33] The Atlantic and Gulf began running thrice-weekly trains from to Albany from the Brunswick and Albany's junction with its own line in late November.[34]
While the lawsuits regarding the finances of the companies were being contested, new communities began to grow along the route of the railroad. In April 1872, Col. Nelson Tift established a sawmill settlement at the crossroads of the Brunswick and Florida Railroad and the Union Road.[35] The next month a post office was established near the Alapaha River along the line called Allapaha.[36] In October 1873, in order to settle the debts of the railroad it was sold to German investors.[37]
In 1882, the line's name would change again to the Brunswick and Western Railroad.
The Atlantic and Gulf Railroad was bought by Henry B. Plant in 1879. It was renamed the Savannah, Florida and Western Railway and would become the main line of the Plant System. The Brunswick and Western Railroad was purchased by the Plant System in 1888 and was fully integrated into the system by 1901. In 1902, the entire Plant System was bought by the Atlantic Coast Line Railroad. The Atlantic Coast Line continued to operate the Brunswick and Western as line as their Albany–Waycross Line (P Line) west of Waycross and as their Waycross–Brunswick Line (O Line) east of Waycross.[38]
The Albany–Waycross Line was the busier segment of the line under the Atlantic Coast Line's ownership. Passenger trains including the City of Miami, Dixie Flyer, Flamingo, Seminole, and South Wind ran the line from Albany to Waycross on their way from the Midwest to Florida. By 1949, the Albany–Waycross Line had three passenger trains and two through freight trains round-trip daily with an additional local freight train running six days a week. At the same time, the Waycross–Brunswick Line had only one local freight train from Waycross to Brunswick six days a week. The Southern Railway also had trackage rights from Southern Junction to Brunswick.[38]
The Atlantic Coast Line became the Seaboard Coast Line Railroad in 1967 after merging with their former rival, the Seaboard Air Line Railroad. The Seaboard Coast Line adopted the Seaboard Air Line's method of naming their lines as subdivisions. As a result, the line was named the Albany Subdivision west of Waycross to Albany and the Brunswick Subdivision east of Waycross. The City of Miami and the Seminole continued to operate on the Albany Subdivision after the merger.[39] Though passenger service was discontinued in 1971 after the Seaboard Coast Line's passenger services were taken over by Amtrak.[40]
In 1980, the Seaboard Coast Line's parent company merged with the Chessie System, creating the CSX Corporation. The CSX Corporation initially operated the Chessie and Seaboard Systems separately until 1986, when they were merged into CSX Transportation. Within the decade, the company abandoned the Albany Subdivision between Sylvester and Pearson.
Current conditions
Today, the Brunswick and Western Railroad still exists today in segments.
The most notable segment of the line still in service is from Waycross to Brunswick which is still operating as CSX's Brunswick Subdivision.[41] At its northwest end it connects to the Jesup Subdivision in Waycross just east of Rice Yard. Though, track in Brunswick from Southern Junction to CSX's current Brunswick Yard was part of the former Brunswick and Birmingham Railroad. The Brunswick Subdivision was still not heavily used into the 2000s and only saw about two trains a day. As of early 2023, CSX completed a new connection from the Brunswick Subdivision to the A Line at Nahunta. This was done to take pressure off of the Jesup Subdivision by providing an additional route for trains from Waycross to access the Nahunta Subdivision. Continuous welded rail and a centralized traffic control signal system were also installed from Waycross to Nahunta to manage the additional traffic from this new connection.[42]
↑ The milepost numbers along the line put in place by the Atlantic Coast Line originate in Waycross and continue from the former Savannah, Florida and Western Railroad. The numbers increase in each direction from Waycross.[44]
Related Research Articles
The Florida Central and Peninsular Railroad was the final name of a system of railroads throughout Florida, becoming part of the Seaboard Air Line Railway in 1900. The system, including some of the first railroads in Florida, stretched from Jacksonville west through Tallahassee and south to Tampa. Much of the FC&P network is still in service under the ownership of CSX Transportation.
The Plant System, named after its owner, Henry B. Plant, was a system of railroads and steamboats in the U.S. South, taken over by the Atlantic Coast Line Railroad in 1902. The original line of the system was the Savannah, Florida and Western Railway, running across southern Georgia. The Plant Investment Company was formed in 1882 to lease and buy other railroads and expand the system. Other major lines incorporated into the system include the Savannah and Charleston Railroad and the Brunswick and Western Railroad.
The Atlantic and Gulf Railroad was chartered in February 1856 by act of the Georgia General Assembly. It was also known as the Main Trunk Railroad. It traversed south Georgia from Screven to Bainbridge, Georgia. Construction began in early January 1859. Its construction was halted by the American Civil War. Construction began again after the end of the war and the line was completed to Bainbridge, Georgia by late December 1867. The route never reached all the way to the Gulf of Mexico as it had originally had intended. The company went bankrupt in 1877 and was bought in 1879 by Henry B. Plant and became incorporated into his Plant System. Its main line is currently operated by CSX Transportation. Throughout its history, the Atlantic and Gulf was closely associated with the Savannah and Albany Railroad Company and its successor the Savannah, Albany, and Gulf Railroad.
The Waycross Air Line Railroad, chartered in 1887, was an air-line railroad in Georgia. It began operations between Waycross and Sessoms in 1890. In 1901, the railroad had extended as far as Fitzgerald, Georgia, at which time its charter was amended for an extension to Birmingham, Alabama, and it was renamed the Atlantic and Birmingham Railroad. That company purchased the Tifton and Northeastern Railroad and Tifton, Thomasville and Gulf Railway on December 3, 1903, changing its name to the Atlantic and Birmingham Railway. In 1906, the Atlantic and Birmingham Railway was in turn purchased by the Atlanta, Birmingham and Atlantic Railway, which continued expansion towards Birmingham.
The Columbus Southern Railway is a historic railroad that operated in the U.S. state of Georgia. The railroad operated an 88-mile line from Columbus to Albany that opened in 1890.
The Savannah, Americus and Montgomery Railway (SA&M) was a historic railroad located in the U.S. states of Georgia and Alabama. SA&M was built in the 1880s running between Montgomery, Alabama and Lyons, Georgia. It would be completed to Savannah, Georgia in 1896 after being renamed the Georgia and Alabama Railway. The line would notably become part of the Seaboard Air Line Railroad network in 1900.
The Riceboro Southern Railway began operations in 2004 operating on about 33 miles of track, some of which is leased from CSX Transportation. The track on which it operates is part of the ex-Seaboard Air Line route from Savannah, Georgia to Jacksonville, Florida. It runs generally from Ogeechee, Georgia, where the line splits from the CSX Savannah Subdivision, which is the former Atlantic Coast Line Railroad's Savannah-Jacksonville route, and Riceboro. It does not have any of its own locomotives; it uses Georgia Central power.
The Jesup Subdivision is a railroad line owned and operated by CSX Transportation in Georgia. The line runs from Jesup, Georgia to Folkston, Georgia for a length of 72.7 miles. It notable passes through Waycross, Georgia, a major CSX freight terminal and CSX operates numerous freight trains over the line. The Jesup Subdivision was once a major route for the Atlantic Coast Line Railroad, one of CSX's predecessors.
The Kingsland Subdivision is a railroad line owned by CSX Transportation in Northeast Florida. The line begins in Jacksonville at a junction with the A Line near Moncrief Yard. From there, it heads east and then turns north near Panama Park. From Panama Park, the Kingsland Subdivision heads north to Yulee on a discontinuous piece of CSX's S Line. In Yulee, the line connects with the First Coast Railroad, which operates north to Seals, Georgia, on tracks that were previously part of the Kingsland Subdivision prior to 2005. The line's namesake is Kingsland, Georgia, which is located north of Yulee on the First Coast Railroad.
The Savannah Subdivision is a railroad line owned by CSX Transportation in the U.S. state of Georgia. Through the middle of Savannah, the Savannah Subdivision splits into an east route and a west route. The East Route runs from Savannah, Georgia, to Ogeechee, Georgia, for a total of 15.6 miles (25.1 km). At its north end it continues south from the Charleston Subdivision and the Columbia Subdivision both of the Florence Division and at its south end it continues south as the Nahunta Subdivision. The West Route is located in Savannah, Georgia, and is 9.7 miles (15.6 km) in length. At its north end it branches off of the Savannah Subdivision East Route and at its south end it comes back into the Savannah Subdivision East Route.
The Wildwood Subdivision is a railroad line owned by CSX Transportation in Florida. It runs along CSX's S Line from Baldwin south to Zephyrhills via Ocala and Wildwood for a total of 155.7 miles. The S Line is CSX's designation for the line that was the Seaboard Air Line Railroad main line from 1903 to 1967.
The Manchester Subdivision is a railroad line currently operated by CSX Transportation in Central Georgia. Its northern terminus is in Peachtree City, where it continues south from the Atlanta Terminal Subdivision. From Peachtree City, it runs for 38.8 miles (62.4 km) south to Manchester, Georgia, where it connects with CSX's Lineville Subdivision and Fitzgerald Subdivision. It is a major north-south route for CSX in Georgia.
The Live Oak, Tampa and Charlotte Harbor Railroad was a historic railroad in Florida chartered by railroad tycoon Henry B. Plant. It was built as an extension of Plant's Live Oak and Rowlands Bluff Railroad. Together, the two lines ran from Live Oak, Florida to Gainesville via High Springs. The lines were completed in 1884.
The Waycross Short Line was the unofficial name of a railroad line built by Henry B. Plant that ran from Waycross, Georgia to Jacksonville, Florida on the St. Johns River. The line through Georgia was chartered by Plant as the Waycross and Florida Railroad and the Florida segment was chartered as the East Florida Railway. The line crossed the Georgia/Florida border just south of Folkston, Georgia at the St. Marys River.
The Folkston Cutoff is a railroad line in southern Georgia. It runs from Jesup southwest to Folkston, a distance of 54 miles. It was built in 1901 by the Plant System to allow trains from the northeast to Florida to bypass their busy terminal in Waycross.
The CSX A Line forms the backbone of the historic Atlantic Coast Line Railroad Main Line, the backbone of their network in the southeastern United States. The main line runs from Richmond, Virginia to Port Tampa just southwest of Tampa, Florida, a distance of nearly 900 miles. Along its route it passes through Petersburg, Rocky Mount, Florence, Charleston, Savannah, Jacksonville, and Orlando. With the exception of a short 61-mile segment in Greater Orlando, the entire line is owned by CSX Transportation.
The Atlantic Coast Line Railroad's DuPont—Lakeland Line was a historic rail line in southern Georgia and the northern west coast of Florida. On employee timetables, the line was actually divided into the DuPont—High Springs Line and the High Springs—Lakeland Line. The line was primarily used for freight, though some passenger services ran on parts of it in Florida. While parts of the line were built as early as 1863, the full line was not complete until 1913. Parts of the line in Florida are still active today.
The Atlantic Coast Line Railroad's Waycross—Montgomery Line was one of the company's secondary main lines running from Waycross, Georgia west to Montgomery, Alabama, a distance of over 300 miles. It was built in the late 1800s by the Atlantic Coast Line's predecessor companies. The line is still in service today and is now the Thomasville Subdivision and Dothan Subdivision of CSX Transportation, the Atlantic Coast Line's successor company through various mergers.
The Atlantic Coast Line Railroad's Albany—Thomasville Line was a historic railroad line in southern Georgia. Built in 1869 by the company's predecessors, it carried some of the Atlantic Coast Line's passenger trains on their routes from the Midwest to the Southeastern United States. The line is still in service today and is now operated by the Georgia and Florida Railway.
References
↑ "The Legislature". Daily Savannah Republican. Savannah, Georgia. 18 November 1836. Retrieved 23 March 2021.
↑ Shofner, Jerrell H.; Rogers, William Warren (1965). "Confederate Railroad Construction: The Live Oak to Lawton Connector". 43 (4): 217–228.{{cite journal}}: Cite journal requires |journal= (help)
↑ ACTS OF THE GENERAL ASSEMBLY OF THE STATE OF GEORGIA, PASSED IN MILLEDGEVILLE, AT AN ANNUAL SESSION IN DECEMBER 1865, AND JANUARY, FEBRUARY, AND MARCH, 1866. Milledgeville, Georgia. 1866. p.204.{{cite book}}: CS1 maint: location missing publisher (link)
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
